Used Start Hole for sale (9,960)

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 27 h, one machine directly available *Prior sale expressly reserved *Round silo at extra charge Press can only be supplied with a system component such as a chipper, cutting mill, hammer mill, screw conveyor, conveyor belt with overbelt magnet or suction Hydraulic briquetting press for rectangular briquettes Type R - throughput up to maximum 500 kg / h * depending on the specific weight of material. Based on a bulk weight of 220 kg / m³. + 24h operation possible + Longevity + Low maintenance costs + Compact structure + High energy efficiency thanks to innovative hydraulics + 25 years of experience . * depending on the bulk weight of your raw material * based on a bulk weight of 200 kg per cubic meter Detailed information after a successful test with your material . Drive motor: 22 kW - IE 3 400 V / 50 Hz / 3 phases Oil cooler: 2.2 kW Agitator: 0.55 kW Screw: 1.5 kW . Hopper: 400x800mm Dsdpfxogbpm Tj Ai Eewd Capacity of approx. 150 liters . Soft start for hydraulic motor Siemens PLC S7-1200 . Auto start and stop via a light barrier integrated in the feed hopper Up to 560 briquettes per hour . Specific pressing pressure: 1,700 kg / cm² Up to 300 bar pressing pressure Briquette format 150x60 mm Briquette length: 40 to 110 mm (adjustable) Dimensions: 2.9 x 2.0 x 2.1 m Weight: 3,800 kg. 600 liter hydraulic oil tank The control is designed for operation from + 10 degrees to +35 degrees . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 15% - Maximum chip length: 20 x 2 x 2 mm - Installation temperature: temperature-controlled room at at least + 8 ° C Otherwise, we recommend heating for an extra charge - The loading must be free of metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and / or increased wear can be the result.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Straight Machine Direct Drive InlineColorPilot IPC (Graphometronic): Automatic inline Register, color measuring and controlling system Dodpfxex Nm Ads Ai Eowd PressPilot Center APL (Fully-Automated Plate Changing ) IntegrationPilot plus Automatic Impression Cylinder Washing Device Automatic Ink Roller Washing Device Automatic Blanket Washing Device with Brush SelectAntistatic for Feeder & Delivery Eltex Non-stop LCS: Low Coverage Stabilisation of Inks QuickStart: re-start with fewer waste sheets Ink. Temperature Control Grapho Metronic Technotrans Cooling Device QuickChange Infeed: Automated selection and motorized setting of the frontlays to be used. QuickChange Air: Job specific air settings for all relevant consumption points via the control console Double Sheet Control - electronic Rolandmatic Dampening Airglide Delivery BECKER VariAir Supply System Powder Exhauster Schneider incl. SCIP Dynamic Sheet Brake Impression Account: 270 Mio.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, actuation type: electric, rotational speed (max.): 3,100 rpm, rotational speed (min.): 700 rpm, total width: 1,487 mm, total length: 4,440 mm, total height: 2,793 mm, throat depth: 1,490 mm, overall weight: 1,900 kg, Equipment: CE marking, documentation/manual, NEW | YEAR 2026 | CE CERTIFIED | MADE IN POLAND | EXW €38,000 + VAT WHY THE PRIAM The Priam is a vertical, electronically controlled glass drilling machine that does most of the work for the operator. The entire feed is electronically controlled — drilling is smooth and repeatable. The operator's role is minimal. After mounting the hole saws, they press the "Calibration" button — the machine measures the length of both drills (front and rear) and their diameter, then automatically assigns the correct spindle speed. After every drill change, the machine will not start drilling until calibration is done — setup errors are impossible. The hole position on the vertical axis is entered on the monitor and the support bar travels there automatically (up to 1,060 mm below the spindle axis); horizontally, the glass is positioned against 6 stops. The machine does the rest: the pneumatic clamp measures the glass thickness, the rear spindle pre-drills to a depth calculated by the controller, and the front spindle completes the hole from the other side — chip-free, clean edges at the first attempt. Optional: double-sided chamfering (hole saw with chamfering ring), tapered holes, and pulse drilling mode for laminated (VSG) glass. Djdpfx Aeh Ek H Soi Eewd BUILT FOR SERIAL PRODUCTION Up to 20 holes on the vertical axis can be programmed — the operator enters the dimensions once and the machine drills them automatically. In serial production (shower enclosures, balustrades) the following panes are drilled without re-entering positions. Drilling at position 0 on the support bar allows holes on the glass edge (half-moon cut-outs). Performance: a Ø 75 mm hole in 4 mm glass in approx. 25–30 s (feed in glass approx. 1 mm/s, speed set by the operator). Recommended: thin-wall, self-sharpening hole saws (e.g. Champion, L=75 mm). TECHNICAL DATA Drilling diameter range: Ø 5–80 mm (both drills same diameter) Glass thickness: 2–20 mm Max. pane size: 2,000 × 4,000 mm, up to 200 kg Support bar travel: up to 1,060 mm below spindle axis Holes on the glass edge (half-moon): yes, position 0 Drilling program: up to 20 holes on the vertical axis Spindle speed: adjustable 700–2,800 RPM, assigned automatically after calibration Feed: automatic, electronically controlled Cooling: closed water circuit, approx. 30 l Compressed air: 6 bar (pneumatic clamping) Power supply: 400 V / 16 A / 4 kW Machine dimensions (L × W × H): 4,440 × 1,487 × 2,793 mm Weight: 1,900 kg Scope of delivery: CE marking, documentation, operating manual MANUFACTURER, SERVICE, TERMS EXPOGLASS is a Polish manufacturer of glass processing machinery — built at our own factory in Nysa (in-house welding shop and powder coating). Service with online support; spare and wear parts available from stock. Delivery and commissioning across the EU, operator training on site. Delivery time: approx. 8 weeks. Warranty: 12 months. Visit our factory and see the Priam drill your own glass samples before you buy — video of the machine in operation in this listing. Glasstec 2026, Düsseldorf, 20–23 October, Hall 12, Stand 12A72.

Condition: new, Year of construction: 2026, operating hours: 2 h, Model 2023 Dsdpjd Ibu Njfx Ai Eewd • Professional fiber laser source XRAYmark with 20 watts of power and 400 kHz • “PreciseView” scanner unit with camera for live image • T-slot plate or threaded hole plate for easy mounting of the marking unit (200 x 200 mm) • Viewing window with certified laser safety glass • Scan area approx. 100 x 100 mm • Manual height adjustment • Housing with manual lift door for easy and safe marking EZCAD III Software • Barcode and QR code support • Serial number function • Batch scanning from Excel file • Laser parameter finder via matrix using 2 parameters (e.g., frequency to speed, frequency to power) • TCP IP connectivity. Various commands can now be transmitted to the software via the TCP protocol. This enables easy integration of external components such as third-party camera position detection, etc. • Industry 4.0: The status can be processed at any time via the TCP/IP protocol. • Inputs and outputs for direct interaction with the external environment • New look and feel. A fresh design that enables even clearer and more user-friendly operation. • 3D preview during rotary axis processing • Performance increase of up to 50% through 64-bit technology • Improved stability • Optional up to 4-axis control WITHOUT switching via PLUG-ins. • Optional DEEP engraving (slicer software with Z-axis control) • Increased engraving speed for hatching patterns through new algorithms. • Completely redesigned galvo generation (Eco, Hi-Speed & 3D) with 2x laser pointer for visual verification of the focus position. Cuhn227e • LED lighting of the marking area • Connection option for external extraction • Start button and EMERGENCY STOP on the housing • Software for PC for Windows operating system • USB cable for connecting to the computer • Operating manual and operating software in German We offer the following as options, among others: =ᐳ IPG laser source / fiber laser source in various power levels =ᐳ motorized and automatic height adjustment =ᐳ Scanlab equipment =ᐳ Automation for component loading, conveyor belts and much more! =ᐳ 3D marking and engraving function =ᐳ automatic focus adjustment =ᐳ Rotary unit =ᐳ motorized slide =ᐳ Interlock system for marking WITHOUT a protective housing, but only with PPE (personal protective equipment) for bulky parts including training at our training center in Schweinfurt! Our engraving lasers are manufactured in our Schweinfurt plant! Therefore, individual requests are possible at any time! =ᐳ Made in Schweinfurt! Images may include options! Laser engraving machine, laser marker, laser marking, laser engraving, laser engraver, laser marking, laser engraving machine, laser engraving machine, laser marking machine, laser marking system, marking laser. Laser engraving machine, laser marker, laser marking, laser engraving, laser engraver, laser marking, laser engraving machine, #Laser marking system for marking many materials. Extremely clean and high-contrast #engravings are achieved with the fiber laser source. This #laser engraving system is economical and easy to operate.

Condition: used, mileage: 100,000 km, power: 471 kW (640.38 HP), first registration: 04/2019, fuel type: diesel, overall weight: 41,000 kg, axle configuration: 2 axles, color: grey, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, soot filter, Please note that the vehicle shows signs of use!!! Vehicle available immediately with the following equipment: * 3-stage trailer hydraulic system * Germany electrical package * MAN Media Package Navigation Plus * Engine D3876LF09 - 640 hp / 471 kW EURO6 * Heavy-duty cooler mounted on a frame behind the cab * Air deflector to prevent dust build-up * Connection for external speed control (ZDR) * Control module for external data exchange (KSM) with * Fleet Management System interface 2.0 (FMS) for superstructure functionality * Variable speed control of the brake system functions * Stone guard in front of the cooler * Engine start and stop system under the front flap * Low-noise certificate for Austria and L-sign * COP document * Emission certificate Euro standard * CEMT certificate * National registration documentation Germany * Supplier declaration * Special certificate for heavy-duty or municipal operation * Superstructure information sheet * Caution: Reduced driving comfort due to front springs * Rear springs parabolic 16 t * AP axle ratio i = 4.33 * Wheels disc 10-hole 11.75-22.5 * AdBlue tank cap lockable 1 pc. * Multifunction leather steering wheel for the cab * Steel bumper, three-piece * Rear cross member for heavy-duty transport and standard trailer coupling, as well as heavy-duty trailer coupling, low * Support plate for gooseneck (low loader) * Fifth wheel coupling front * Trailer coupling ROCKINGER 56 EU mounted at the bottom * Fifth wheel coupling JOST JSK 38 C-1 3.5?? overall height 190 mm * Fifth wheel plate with sliding mechanism for JOST JSK 38C * Emergency braking signal (ESS) * Brake connection front 2-line Dsdpfx Aijvt Ih Do Eowd * Additional brake connection 2-line at the end of the frame * Parking brake with pneumatic application of the front brakes * Storage box accessible from the inside and outside - flap release from the inside * Door extension * Cab tilting mechanism, hydraulic/electric * Aero package for cab with high roof including roof spoiler (separate) and side panels * Cab suspension, air-sprung for the cab * Curb mirrors, right & left, heated and electrically adjustable * Comfort control module on the upper bunk, driver comfort seat, air-sprung and air-conditioned with lumbar support and heating * Passenger seat, static, longitudinally, backrest and height adjustable * Stand-alone air conditioning R134A * Armrests for driver's seat * Compressed air connection in the cab * Compressed air hose and compressed air gun * Interior lighting, red/white in the cab roof, dimmable * Gooseneck light in the roof edge on the driver's side * Reading lights for driver and passenger * Ambient lighting * Mattress for lower bunk with zone hardness * All-around curtain * Partition curtain * Sun blind on both doors * Cool box under the lower bunk, fully retractable * 2 drawers extendable in the dashboard center section * Superstructure switch panel for the subsequent installation of four additional switches * Digital tachograph, manufacturer CONTI * Preparation for data interface remote download on digital tachograph * Language 2 - English for instrument panel display * Display in instrument panel for trailer data (axle load) * Distance and fog lights, additionally with turning light * LED daytime running lights * LED position lights * Switch and wiring for cargo area lighting * Rear lights in LED technology * Preparation for additional lighting on the cab roof & for installation of flashing beacons * Reversing light at the entrance * Video functio

Condition: as good as new (ex-display), Fronius TPS 2700 Pulse Device Ready to Weld ---> Dwjdpfx Asvl D Idei Eed Scope of delivery: ➤Fronius TPS 2700 power source (270A TRANS PULS SYNERGIC) ➤Fronius hose package with display on the torch (arc, amperage jobs, etc. adjustable from the torch) ➤Ground cable 3-4m ➤Pressure regulator with new blade ➤Gas hose ➤15kg spool adapter ►►► Perfect for mobile use This device is perfect for quick and mobile use. Quick to fit in the car and easy to take anywhere - yet no loss of welding quality. Also suitable for stationary use, of course. Questions: ----- How old is the machine? Our customers usually retire their devices between 3-5 years old. Sometimes more, sometimes less. What is the condition, and does the device even work properly? Yes! Everything works as it should! We disassemble, clean, replace wear parts, reassemble, and test all devices. The devices are clean; we don't have any that look completely finished! They're in great condition! Only minimal signs of wear. All pictures are original photos of our devices. They're sample images. We don't have any displays with burn holes. Can I negotiate the price with you? If you buy multiple devices, we can discuss the price. Is shipping possible? Yes, it's possible. We pack the device on a pallet and ship it insured via our shipping company. Can I view the devices somewhere? We have an online store; you can come by to pick up a device, and of course, you can also test it with us before paying. We don't have regular business hours. Everything works by appointment. All devices are assembled according to customer specifications and delivered after payment—that's our standard procedure. Do you offer a warranty? No, we don't offer a warranty. We sell like-new, used, affordable professional welding equipment, usually for 1/4 to 1/2 the new price. For the difference compared to a new device, you can buy two more from us, or you can use the savings to maintain this or several devices for many years. For example, the Fronius TPS 2700, as advertised here, costs around €8,500 new. We offer it for less than 1/3 of the new price. All prices are starting from prices; you can configure the devices with us. ...

Condition: used, Year of construction: 2002, 3 MONTHS WARRANTY offer consists of: Horizon HP-20A punch unit - features: press- and punch - numbers of holes: max. 4 holes; min. 2 holes - punch hole position: max. 14mm; min. 9mm - punch hole diameter: 6mm - size: max. 350x500mm; min. 120x90mm - punch thickness: max. 3,2mm - speed: max/hr. 4050 Broschüren/h - power: 230V / 50Hz - 260W Dsdpfx Aou Tdmqji Eewd - dimensions: 590x760x1035mm - weight: 200kg

Condition: excellent (used), Year of construction: 2004, Arburg 470C 1500-675 Year of manufacture: 2004 Injection unit: Screw diameter: 60 mm Injection weight: 427 g Injection pressure: 1440 bar Metering volume: 508 ccm Clamping unit: clamping force: 150 t tie bar distance: 470x470 mm size of clamping platens: 685x685 mm ejector: hydraulic clamping unit: hydraulic Dwedpfxoz Ip Eae Ai Esd Control system: SELOGICA Additional equipment: Euromap 12 Robot interface Core pull control Injection unit hardened - bimetal Parallel movements Dimensions: Weight: 4660 kg Length/width/height: 5.00x1.93x2.22 m Drive: Pumps/motor: 30 kW Heating power: 14,9 kW Total power: 44,9 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2008, Arburg 470C 1500-400 with the Wittmann W711 robot Year of construction: 2008 Injection unit: Screw diameter: 45 mm Injection weight: 232 g Dwodpfx Aioz Ip E He Ejd Injection pressure: 1580 bar Metering volume: 254 ccm Clamping unit: Clamping force: 150 t Distance between tie bars: 470x470 mm Size of the clamping platens: 650x650 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA touchscreen Additional equipment: Euromap 67 Robot interface Air valve x 1 Hardened injection unit - bimetal Proportional valve on the injection unit - precise injection Robot Wittmann W711 Year of construction: 2007 4-axis robot: 3 axes are driven by servomotors (electric); axis C Travel in axes: X-420, Y-1200, Z-2000 Touch control panel The safety package for robots Robot with adapter Purchase of the robot for an additional charge Dimensions Weight: 4900 kg Length/width/height: 4.44x1.63x2.09 m Drive: Pump/motor: 18.5 kW Heating output: 9.7 kW Total output: 28.2 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2016, Arburg 570S 2200-290/100/100 / Production line with the Wittmann W823 robot / Operating hours: 20,499 h in automatic mode Year of construction: 2016 Injection unit: Screw diameter: 35 mm Injection weight: 132 g Injection pressure: 2000 bar Metering volume: 144 ccm Clamping unit: Clamping force: 220 t Distance between tie bars: 570x570 mm Size of the clamping platens: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA touchscreen Additional equipment: 3-component injection molding machine, high speed Very good technical condition Operating hours: 20,499 h in automatic mode Euromap 67 Robot interface Air valve x 6 Hydraulic, needle core pull, controlled by a proportional valve x 4 Control unit with hot runners Hardened injection unit - bimetal Proportional valve on the injection unit - precise injection Machine with two cylinders / battery with compressed nitrogen (additional charge for fast work) The machine is designed for operation with an electric turntable. The machine has an inverter to control the servomotor in the rotary table and an interface for connecting the rotary table Parallel movements Screw diameter in the vertical injection unit: ⌀25 mm - 45 g/hp Screw diameter in the lateral injection unit: ⌀25 mm - 45 g/hp Djdpez Iqaxjfx Ai Eewd Wittmann W823 robot Year of construction: 2015 5-axis robot: 3 axes are driven by servomotors (electric); axis C and movement A Travel in axes: X-550, Y-1400 (telescopic), Z-3500 Touch control panel The safety package for robots Robot with adapter, conveyor belt and protective housing Purchase of the robot and conveyor belt for an additional charge Dimensions Weight: 10830 kg Length/width/height: 5.53x1.77x3.29 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2004, Boy 90 M Year of manufacture: 2004 Injection unit: Screw diameter: 42 mm Injection weight: 193 g Injection pressure: 1724 bar Metering volume: 214.7 ccm Clamping unit : clamping force: 90 t tie bar distance: 430x360 mm size of clamping platens: 635x610 mm ejector: hydraulic clamping unit: hydraulic Control: Procan - touch screen Additional equipment: Euromap 12 Robot interface Air valve x 1 Dimensions: Weight: 3100 kg Length/width/height: 4.37x1.21x2.20 m Drive: Dwodpjz Iqfzsfx Ai Eod Pumps/motor: 15 kW Heating power: 11,3 kW Total power: 26,3 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2016, Boy 55A Pro / Operating hours: 18,153 in automatic mode / Machine in very good technical condition. Year of manufacture: 2016 Injection unit: Screw diameter: 38 mm Injection weight: 123.9 g Injection pressure: 1508 bar Metering volume: 136.1 ccm Clamping unit: Clamping force: 55 t tie bar distance: 360x335 mm size of clamping platens: 665x600 mm ejector: hydraulic clamping unit: hydraulic Control system: Procan Alpha - touch screen Additional equipment: Machine in very good technical condition Dsdpfxoz Iqhce Ai Ejwd Operating hours: 18.153 in automatic mode Pneumatic core x 2 injection unit hardened - bimetal The machine has been regularly serviced by the authorized service boy in France It is possible to change the screw diameter for fi 32 mm or 42 mm Dimensions: Weight: 2430 kg Length/width/height: 3.25x1.14x2.02 m Drive: Pumps/motor: 11 kW Heating power: 7,7 kW Total power: 18,7 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2020, Boy XS / Excellent technical condition Year of manufacture: 2020 Injection unit: Screw diameter: 12 mm Shot weight: 4.1 g Injection pressure: 3128 bar Dosage volume: 4.5 ccm Clamping unit: Clamping force: 10 t Tie bar spacing: 160 mm Size of mounting platens: 321x246 mm Ejector: hydraulic Clamping unit: hydraulic Control system: Procan Alpha 4 - Touchscreen Additional equipment: Machine as new Euromap 67 Robot interface Air valve x 6 Integrated side sprue picker Automatic Wittmann loader with Farratech brand dryer Optional: AMF brand clamping elements for tooling available for purchase Dimensions: Weight: 450 kg Length/Width/Height: 1.48x0.52x1.38 m All offered machines are started up by our service technicians prior to sale. A video of the technical inspections of the selected machine can be provided, or you can participate in live technical tests at our facility in Łódź. Price: On request Dsdsz Iqk Depfx Ai Eewd

Condition: excellent (used), Year of construction: 1995, Demag Ergotech Compact 250-80 Year of manufacture: 1995 Injection unit: Screw diameter: 18 mm Injection weight: 20 g injection pressure: 2400 bar Dosing volume: 22.8 ccm Clamping unit: clamping force: 25 t tie bar distance: 280x280 mm size of clamping platens: 410x410 mm ejector: hydraulic clamping unit: hydraulic Control system: NC4 Additional equipment: Air valve x 2 Hydraulic core pull x 1 Injection unit hardened - bimetal Original Demag mold crane: chain, electrically controlled, 2 lifting speeds Dimensions: Weight: 2600 kg Length/width/height: 3.20x1.30x1.80 m Drive: Pumps/motor: 7,5 kW Heating power: 3,7 kW Total power: 11,2 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Dodoz Iqlbepfx Ai Eowd Price: Upon request

Condition: excellent (used), Year of construction: 2006, Demag Ergotech System 80/420-430 Year of manufacture: 2006 Injection unit: Screw diameter: 40 mm Injection weight: 205 g Injection pressure: 2020 bar Metering volume: 231 ccm Clamping unit: clamping force: 80 t tie bar distance: 420x420 mm size of clamping platens: 580x590 mm ejector: hydraulic clamping unit: hydraulic Control system: NC4 Additional equipment: Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 3 Control with hot runners Injection unit hardened - bimetal Built-in printer It is possible to change the screw diameter Dimensions: Weight: 4100 kg Dodpfx Aijz Iql Ie Eowd Length/width/height: 4.10x1.40x1.90 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2005, Krauss Maffei KM 80-180 CX with the Sepro Industrial Robot 55 sprue picker Year of construction: 2005 Injection unit: Screw diameter: 30 mm Injection weight: 77.4 g Injection pressure: 2025 bar Dosing volume: 85 ccm Clamping unit: Clamping force: 80 t Distance between tie bars: 420x420 mm Size of the clamping plates: 670x670 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC V - touch screen Additional equipment: Euromap 67 Robot interface Control unit with air valve Hydraulic core pull x 1 Hardened injection unit - bimetal Sprue picker Sepro Industrial Robot 55 Year of construction: 2018 It is possible to purchase a Moretto brand raw material feeding system for an additional charge The set includes: - Screw feeder, volumetric with hopper - Feeder with proportional valve Dimensions: Weight: 3900 kg Length/width/height: 3.80x1.50x2.10 m Drive: Pumps/motor: 15 kW Heating output: 8.12 kW Total output: 23.12 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Dodpfsz Iqn Aex Ai Eowd Price: On request

Condition: excellent (used), Year of construction: 2021, Chen Hsong JetMaster 88-MK6 with Sepro Industrial Robot Succes 7 / Hybrid Machine Year of manufacture: 2021 Injection unit: Screw diameter: 41 mm Shot weight: 246 g Injection pressure: 1890 bar Dwodpfxoz Iqp Ho Ai Eed Dosing volume: 271 ccm Clamping unit: Clamping force: 128 t Tie bar spacing: 410x410 mm Platen size: 620x605 mm Ejector: electric Clamping unit: toggle Control: BECKHOFF - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving, and very quiet Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 2 Control with hot runner system x 8 Injection unit hardened - bimetal Main motor of the machine - servo motor with inverter drive - energy saving Central lubrication Automatic tool height adjustment Rexroth hydraulics The machine was serviced in Germany Robot Samfacc Year of manufacture: 2022 4-axis robot: 3 axes are driven with servo motors (electric): X, Y (telescopic), Z; Axis C – pneumatic Safety package for robots Robot with adapter, conveyor belt, and protective housing Purchase of the robot and conveyor belt for an additional charge Dimensions: Weight: 4000 kg Length/Width/Height: 4.90x1.30x1.80 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2003, Arburg 270S 250-60 U / Universal Machine Year of Manufacture: 2003 Injection Unit: Screw Diameter: 18 mm Shot Weight: 17 g Injection Pressure: 2500 bar Dosing Volume: 20 ccm Clamping Unit: Clamping Force: 25 t Tie Bar Spacing: 270x270 mm Platen Size: 400x400 mm Ejector: hydraulic Clamping Unit: hydraulic Control System: SELOGICA - Touchscreen Additional Equipment: Universal machine - Injection unit can operate both vertically and horizontally Euromap 12 Robot interface Air valve x 4 Dwjdpez Iqrusfx Ai Eed Hydraulic core pull x 1 Control system with hot runner system x 8 Injection unit hardened - bimetal Proportional valve on the injection unit – precise injection Type of injection unit: Vario, allows the injection unit to be used, for example, for side injection Automatically opening cover Dimensions: Weight: 1900 kg Length/Width/Height: 2.89x1.11x1.85 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2012, Arburg 680CB 400-170 / Vertical injection molding machine, tie-bar-less / Very good technical condition. Year of manufacture: 2012 Injection unit: Screw diameter: 25 mm injection weight: 54 g Injection pressure: 2500 bar Metering volume: 59 ccm Clamping unit : clamping force: 40 t tie bar distance: 0x0 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - touch screen Additional equipment: Very good technical condition Vertical injection molding machine, tie-bar-less Euromap 67 Robot interface Air valve x 3 Hydraulic core puller x 3 Hot runner control x 12 Injection unit hardened - bimetal Proportional valve on the injection unit - precise injection It is possible to change the screw diameter The machine has been regularly serviced by the authorized service Arburg Original Arburg mold crane Dimensions: Weight: 6500 kg Length/width/height: 1.97x1.69x3.40 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Dwedpoz Iquvsfx Ai Eod Price: Upon request

Condition: excellent (used), Year of construction: 2004, Arburg 320C 500-250 Year of manufacture: 2004 Injection unit: Screw diameter: 35 mm Shot weight: 121 g Injection pressure: 1,820 bar Shot volume: 144 cc Clamping unit: Clamping force: 50 t Tie bar spacing: 320x320 mm Platen size: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 12 Robot interface Air valve x 1 Hydraulic core pull x 1 Dwedpfx Aiez Iqyfs Eod Injection unit hardened – bimetallic Dimensions: Weight: 2,330 kg Length/Width/Height: 3.41x1.47x1.99 m Drive: Pump/motor: 15 kW Heating capacity: 6.5 kW Total power: 21.5 kW All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2012, Battenfeld EcoPower SE 300/1330 / Electric machine Year of manufacture: 2012 Injection unit: Screw diameter: 50 mm Injection weight: 491.4 g Injection pressure: 2470 bar Metering volume: 540 ccm Clamping unit: Clamping force: 300 t tie bar distance: 770x720 mm size of clamping platens: 1090x1170 mm ejector: electric clamping unit: toggle lever control: UNILOG B6 - touch screen Additional equipment: electric machine: high speed, energy saving and very quiet Machine in very good technical condition Euromap 67 Robot interface Air valve x 8 Control unit with hot runners x6 Injection unit hardened - bimetal Parallel movements It is possible to change the screw diameter for fi 45, 55, 65 mm Dimensions: Weight: 14100 kg Length/width/height: 7.20x2.04x2.20m Propulsion: Pumps/motor: 0 kW Heating power: 22 kW Total power: 0 kW All offered machines are started by our service technicians before sale. Dwsdpez Ipgwjfx Ai Eod It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2015, Battenfeld VM 150/525 R1280 Servo Power / Vertical Injection Molding Machine with Rotating Table Year of manufacture: 2015 Injection unit: Screw diameter: 35 mm Injection weight: 175.6 g Injection pressure: 2743 bar Dosing volume: 193 cc Djdpfjz Iphnex Ai Eswd Clamping unit: Clamping force: 150 t Type distance: 0 x 0 mm Clamping platen size: 1280 mm Ejector: hydraulic Clamping unit: hydraulic Control system: UNILOG B6 Additional equipment: Vertical injection molding machine with rotating table Hybrid machine: high-speed, energy-efficient, and very quiet Air valve x 5 Hydraulic core pull x 1 Control system with hot runners x 12 Injection unit is wear-resistant and corrosion-resistant Rotating table diameter: 1500 mm Rotary table, driven by a servo motor and controlled by an inverter Dimensions: Weight: 11300 kg Length/Width/Height: 3.83 x 1.50 x 4.07 m All machines offered are started up by our service technicians before sale. You can receive a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2019, Krauss Maffei KM 121-380 PX / Electric Machine Year of manufacture: 2019 Injection unit: Screw diameter: 35 mm Shot weight: 140 g Injection pressure: 2429 bar Dosing volume: 154 ccm Clamping unit: Clamping force: 120 t Tie bar spacing: 470x420 mm Platen size: 640x590 mm Ejector: electric Dwedpfx Aoz Ipltji Ejd Clamping unit: toggle Control: MC6 - Touchscreen Additional equipment: Machine in very good technical condition Electric machine: energy-saving and very quiet Operating hours: approx. in automatic mode Euromap 67 Robot interface Air valve with vacuum x 2 Hydraulic core pull x 1 Control system with hot runner nozzles x 15 Injection molding unit is wear-resistant and corrosion-resistant Main motor of the machine - servo motor driven by an inverter - energy saving Central lubrication Parallel movements Automatic tool height adjustment Dimensions: Weight: 9400 kg Length/Width/Height: 5.10x1.60x1.88 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2007, Engel Insert 80V/80V/100 2F / 2-K tie-bar-less machine, vertical / Perfect technical condition Year of manufacture: 2007 Injection unit: Screw diameter: 2 x 25 mm Injection weight: approx. 49 g Injection pressure: 1214 bar Metering volume: 54 ccm Clamping unit: Clamping force: 100 t tie bar distance: 0x0 mm Ejector: hydraulic Clamping unit: hydraulic Control unit: CC 200 Additional equipment: Tie-bar-less machine with two vertical injection units, with turntable. Dsdpfxoz Ipn Ie Ai Eswd Air valve x 6 Hydraulic core puller x 2 Control system with hot runners x 12 Infrared protection curtains Thermoplastic and rubber injection units are available for this machine Turntable diameter: 1200 mm The machine has been regularly serviced by the authorized service Engel in Germany Dimensions: Weight: 9400 kg Length/width/height: 4.85x1.47x2.30 m Propulsion: Pumps/motor: 30 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2017, Engel Victory 330H/200V/140 combi Ecodrive / Production line with the Sepro Multi Inject 20 robot / Operating hours: approx. 18,000 h in automatic mode Year of construction: 2017 Injection unit: Screw diameter: 30 mm Injection weight: approx. 100 g Injection pressure: 2400 bar Dosing volume: 113 ccm Clamping unit: Clamping force: 140 t Distance between tie bars: 0x0 mm Size of the clamping platens: 750x750 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - touch screen Additional equipment: 2K injection molding machine with rotary table and robot Tie-bar-less machine, hybrid: energy-saving, high-speed and very quiet Very good technical condition Operating hours: approx. 18,000 in automatic mode Total number of operating hours: 25,369 h Euromap 67 Robot interface Djdoz Ipqpjpfx Ai Eowd Air valve x 8 Hydraulic core pull x 5 Control unit with hot runners x 16 Reinforced injection units - bimetal Main motors - 2 x servo motor controlled with inverter Proportional valves on injection units - precise spraying Parallel movements Built-in pressure quality control system from Sensor Kistler - mold pressure measurement Screw diameter in the vertical injection unit: ⌀25 mm - approx. 58 g/hp It is possible to purchase the original Foboha turntable for an additional charge Turntable diameter: 740 mm Sepro Multi Inject 20 robot Year of construction: 2017 3-axis robot: 3 axes are driven by servo motors (electric): X, Y, Z (telescopic) Travel distances in axes approx.: X-4000, Y-1200, Z-1500 Automatic axis lubrication Touch control panel The safety package for robots Robot with adapter and protective housing Purchase of the robot for an additional charge Dimensions Weight: 10300 kg Length/width/height: 5.56x1.76x3.46 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request