Used Support Ribbon Magnet for sale (14,716)

Condition: good (used), Twin Ribbon Mixer Fully Stainless Steel Mixing Chamber Dimensions 1500mm Long x 1100mm Wide x 700mm Deep Kjdoqu Uykspfx Airjdn

Year of construction: 2023, condition: new, functionality: fully functional, This machine, type KM13, cuts electrical cables from 20 to 120 mm in diameter. The different diameters are easily adjusted by turning the hand wheel up and down. The machine has a speed of 25 mtr/min. The dimensions are: length 600 mm, width 600 mm and height 1600 mm. The weight of this machine is about 200 kg. This machine is powered by a 380V-50HZ, 3KW electric motor with a gearbox cabinet. The cable is cut from 2 sides so the copper core falls out easily. Kodpfeq E Ti Hox Airsdn Spare parts such as blades, drive, bearings etc can also be supplied. If required we can also perform maintenance on these machines A machine that is ready to use and easy to operate. If you want to try it, please bring cable.

Condition: used, Used Babcock Gardner Type 100L 316 stainless steel ribbon blender. Approximate 100 litre working capacity. Mixing trough approximately 350mm wide x 500mm deep x 1000mm long. Single interrupted ribbon direct driven by a 1.5 kw 415 volt 3/50 1420 rpm motor through a David Brown GHT 2 gearbox with a ratio of 20.34/1 and an output RPM of 71.3. Specifications: Capacity: 100 L Material of construction: 316 Stainless Steel Width: 350 mm Horsepower: 1.5 kW Length: 1,000 mm Jacket: No Type Of Ribbon: Single Kdjdpfx Aiszfh U Djrsn

Condition: good (used), electric magnetic plate, mounting plate, magnetic clamping plate, magnetic mounting plate, magnetic prism, magnetic prism, magnetic base -Magnetic prism: Magnetic measuring and clamping prism -Clamping surface: Length 120 mm -Prisms/Clamping surface: see photos -Magnet: can be switched on and off -Dimensions: 120/75/H105 mm Kdedpfx Aiox Sv Sajrsn -Weight: 4.5 kg

Condition: good (used), Crane magnet, lifting magnet, load lifting magnet, load lifting magnet, round magnet, scrap lifting magnet, scrap magnet -Magnetic lifter: Lifting magnet -Type designation: MC01 1027 RU 2.7 SO -Load capacity: t Kjdpfxozd Sdao Airjdn -Voltage: 220 V -Dimensions: Ø 280 x 230 mm -Weight: 43.8 kg

Condition: good (used), Clamping plate, milling support, plate field, welding table, welding table, plate boring mill, clamping angle, clamping cube, clamping devices, clamping supports, clamping tool, clamping box, clamping tower -Clamping block: for workpiece clamping -Width: 700 mm -Length: 107 mm -Height: 440 mm -Threaded holes: M24 -Bores diameter: mm -Number: 2x milling support available -Price: per piece Kdsdpfjcn Ibgjx Airon -Weight: 235 kg/piece

Condition: ready for operation (used), Siemens 1HU3078-0AC01-Z permanent magnet motor, serial number: ED087590701005, with 1HU1053 20mVmin tachometer and EBD 2M 24V-23W holding brake, used, in good condition, 100% functional, scope of delivery as shown in the photos. Ksdpfx Aiszd I Emsrodn

Condition: new, Year of construction: 2021, weight / kg Kdedpfxezcq N Tj Airjn

Condition: used, Year of construction: 2012, operating hours: 14,278 h, Vehicle No.: 375-25 Terex-Fuchs MHL 340 Magnet system ENGINE NEWLY OVERHAULED * Year of manufacture: 2012 * Operating hours: 14,278 hours * Weight: 27,400 kg * Power: 128 kW * Solid rubber tires (POOR CONDITION) Inspection is possible at any time during our business hours; test drives can be arranged by appointment! For export sales, a deposit will be withheld; this will be refunded after receipt of the proof of arrival certificate. Company or advertising logos on the vehicles may have been digitally edited in the photos. No guarantee is given for the function of accessories or additional equipment. Kdodpfx Aiex S Aireron All information is subject to change without liability – errors, modifications, typing mistakes, and prior sale reserved. Vehicle descriptions do not constitute guaranteed properties. Please refer to our general terms and conditions and acknowledge them.

Condition: ready for operation (used), Indramat MAC090C-0-KD-3-C/110-B-1/S001 permanent magnet motor , serial no. according to photo , hole spacing of mounting holes: 116 x 116 mm, Ø drive shaft: 24 mm ,used, strong traces of use, 100% functional, scope of delivery according to photos Kdsdpfxei D Imne Airen

Condition: ready for operation (used), Siemens 1FT5046-1AF71-3EA0 permanent magnet motor SN EF186446105001 + HE-65-M rotary encoder, used, minor signs of wear, 100% functional, scope of delivery as per photos Ksdpfx Ael Syhgjirsdn

Condition: ready for operation (used), Siemens 1FT5046-1AK71-3EG0 3-Permanent Magnet Motor, serial number: E L390 5245 02 002, used, in good condition, 100% fully functional, scope of delivery as per photos. Kedpfx Aiewyrfrjrsdn

Condition: ready for operation (used), Siemens 1FT5052-1AG71-4EG0 3-Permanent Magnet Motor, serial number: E L299 9994 01 003, used, in good condition, 100% functional, delivery as per photos. Ksdpfx Aiewyrfxersdn

Condition: ready for operation (used), Siemens 1FT5074-0AC01 - Z Permanent Magnet Motor SN:E5A83357501016, used, in good condition, 100% fully functional, delivery as per photos. Kdedpfjxd I Unox Airsn

Condition: new, Rexroth Indramat MDD071B-N-060-N2M-095GA0 Permanent magnet motor , unused, 100% functional Kedsi D Ndtjpfx Airodn

Condition: ready for operation (used), Indramat MDD071C-N-060-N2S-095GA0 Permanent Magnet Motor SN MDD071-09260, used, normal signs of use, 100% functional, scope of delivery as per photos Ksdpei D Iuvefx Airsdn

Condition: ready for operation (used), Siemens 1HU3078-0AC01-0ZZ9-Z permanent magnet motor SN: E8763670601001, used, good condition, 100% functional, scope of delivery as shown in photos, Z see nameplate. Kdjdpfx Aisx Dvk Roren

Condition: ready for operation (used), Siemens 1HU3078-0AF01 -Z Z=H01 Permanent Magnet Motor SN: E0V87827901008, used, heavy signs of wear, 100% functional, scope of delivery as per photos. Kodpfx Asx Dvlneirsdn

Condition: ready for operation (used), Siemens 1FT5066-0AC01 3-phase permanent magnet motor, serial number: E 7G10 7041 54 027, used, in good condition, 100% functional, scope of delivery as per photos Kjdsw D Ndgspfx Airedn

Condition: ready for operation (used), Siemens 1FT5066-0AF01 - Z Permanent magnet motor SN:E7A91554703006 , Z= G45: holding brake installed EBD 0,8 M 24V - 18W ,used, normal signs of wear, 100% functional, scope of delivery as per photos Kjdpfx Aijvgpm Isrjdn

Condition: ready for operation (used), Siemens 1FT5066-0AF01 - Z Permanent magnet motor SN:E7M92927001002 , Z= G45: Holding brake installed EBD 0,8 M 24V - 18W ,used, normal signs of wear, 100% functional, scope of delivery as per photos Kjdpfxjvgpnfe Airodn

Condition: ready for operation (used), Siemens 1FT5071-0AF02-Z permanent magnet motor SN: 7K84943611021, used, good condition, 100% functional, scope of delivery as per photos Kodsqg A Hgopfx Airodn

Condition: ready for operation (used), Siemens 1FT5071-0AF02-0 - Z Permanent Magnet Motor SN:E8H61677401011 - with 1FU1050-6BF 13.3 mVmin tachogenerator, Z = K93 (housing IP67), used, in good condition, 100% functional, delivery as per photos. Kdjdpfx Aey Npmfjiren

Condition: ready for operation (used), Siemens 1FT5076-0AF01-2 permanent magnet motor SN:E1X10106315007, used, heavy signs of use, 100% functional, scope of delivery as per photos Kdedpei D S Dajfx Airen

Condition: new, Siemens 1FT5103-0AF01-2 3~ permanent magnet motor, serial number as per photo, unused in opened original packaging, 100% functional, scope of delivery as per photos Kdjdpfx Aji D Taaoirjn