Used Tb Sprint 303 for sale (3,481)

Condition: excellent (used), Year of construction: 2016, KAESER Energy-Saving Refrigerant Air Dryer, Model TB 26 SECOTEC Volume flow: 2.55 m³/min | Pressure dew point: 3 °C | Refrigerant: R-513A Volume flow (m³/min) 2.55 Pressure dew point (°C) 3 Pressure drop (bar) 0.20 Electrical power consumption at 100% volume flow (kW) 0.62 Electrical power consumption at 50% volume flow (kW) 0.34 Electrical power consumption at 10% volume flow (kW) 0.1 Min. overpressure (bar) 3 Max. overpressure (bar) 16 Min. ambient temperature (°C) 3 Max. ambient temperature (°C) 43 Max. inlet temperature, compressed air (°C) 55 Width (mm) 620 Depth (mm) 540 Height (mm) 963 Weight (kg) 116 Compressed air connection G 1 Condensate drain connection G 1/4" Electrical supply 230 V / 1 phase / 50 Hz Refrigerant R-513A Refrigerant charge (kg) 0.53 Cjdpfezrhizjx Aagjrf CO2 equivalent (t) 0.33 Global warming potential (GWP) 631 Energy-saving control Refrigerant storage Location: available from warehouse 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2011, Used 2011 CMZ TB67 presented in immaculate and well maintained condition, and photo'd here whilst still in production...specified as follows: Technical Specifications: Max. Swing Diameter 640mm Turning length: 400mm Maximum turning Ø: 340 mm X-Z travels: 200-400mm Codpsy Ui Iaefx Aagsrf Spindle Nose: A2-6, Max RPM: 4,000 rpm Spindle Size / max bar Ø: 66mm Power: 17.4 Kw Turret 12 positions. Tailstock, shank travel: 120 mm Tailstock Quill Dia: 90mm X/Z Rapid Feed Rate: 30 m/min Machine Dimensions (L x W x H): 1,653 x 1,620 x 1,670 mm Machine Weight: 3,700 kg Additional Equipment: Parts Catcher Swarf Conveyor Tailstock Tool Measuring Arm Suite of tool holders 3-Jaw Hydraulic Chuck Turning length: 400mm Maximum turning Ø: 340 mm X-Z travels: 200-400mm Spindle Nose: A2-6, Max RPM: 4,000 rpm Power: 17.4 Kw Tailstock, shank travel: 120 mm Tailstock Quill Dia: 90mm X/Z Rapid Feed Rate: 30 m/min Machine Weight: 3,700 kg

Condition: used, Year of construction: 2006, operating hours: 6,424 h, machine/vehicle number: 6046, overall weight: 6,432 kg, enginetype: Diesel, manufacturer: Snorkel Csdpjzcbdbjfx Aagerf

Condition: used, functionality: fully functional, turning diameter over cross slide: 660 mm, spindle bore: 105 mm, turning diameter: 910 mm, turning diameter over bed slide: 813 mm, turning diameter over top slide: 535 mm, turning length: 2,500 mm, spindle speed (max.): 643 rpm, spindle speed (min.): 16 rpm, Binns & Berry TB 909 Double Gap Bed Lathe Model: TB 808 Swing Over Bed: 808mm (32”) Cedpfx Aezlhtaoagjrf Swing Over Top Slide: 535mm (21.4”) Distance Between Centers: 2500mm (100”) Spindle Speeds: 16.6 – 643 RPM Spindle Bore: 105mm (4.2”) Machine With: 4 Jaw Chuck 3 Jaw Chuck Fixed Steady 2 Axis Digital Readout Rapid Traverse To Saddle

Condition: excellent (used), LAUDA LTH 303 Temperature Control Unit / Heating Unit for Tool Temperature Control We have 3 LAUDA LTH 303 temperature control units for sale, all in very good condition. These units are ideally suited for temperature control of extrusion tools, nozzles, calibration dies, injection molds, and a wide range of industrial applications. All units are fully functional, immediately available, and can be inspected at our facility in Wuppertal at any time. Technical Data * Manufacturer: LAUDA * Model: LTH 303 * Year of Manufacture: 1990 * Heat Transfer Medium: Oil * Max. Supply Temperature: up to 350 °C * Connection Voltage: 220 V * Heating Power: 3.2 kW * Frequency: 50 Hz Features * Digital temperature display * Integrated circulation pump Cedpfszpxcyex Aagorf * Compact, robust industrial design * User-friendly control * Ready for immediate use

Condition: used, Year of construction: 2011, machine/vehicle number: 268S24, Max. bar diameter: 32 mm, max. machining length: 250 mm, with FANUC Series 160i-TB control, conveyor belt, chip conveyor, left-hand bar loader FMB Turbo 3-36, serial number: 51-261463/876667, year of manufacture: 2011, filter and cooling unit, high-pressure system COMBILOOP, without tools. Cjdpfszqy T Nex Aagjrf

Condition: used, Year of construction: 2011, machine/vehicle number: 265S24, Max. bar diameter: 32 mm, max. machining length: 250 mm, with FANUC Series 160i-TB control, conveyor belt, chip conveyor, left-hand bar feeder FMB Turbo 3-36, serial number: 50-2614661/867593, year of manufacture: 2010, filter and cooling unit, high-pressure system COMBILOOP, without tools. Codpfszqy Uajx Aagerf

Condition: used, Year of construction: 2016, offer consists of: Csdpfx Aezqr R Teagorf Horizon TB-30 trimmings blower for Stitchliner or booklet maker - weight: 110kg We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: new, Year of construction: 2025, neu 2025 030138 prompt, Zwischenverkauf v Deutschland 3444.77 € 1 13 mm MK 2 220 mm 40 - 4000 U/min M 10 (steigungsabhängig) 520 mm 400 mm 850 mm 62 kg 60 mm 85 - 370 mm 420 mm 300 x 250 mm 70 mm Cedpfxjxcbhrs Aagjrf Continuous/normal drilling performance 13/15 (in E335/ST60), 12 Nm Manual feed Digital speed and drilling depth display Thread cutting device Control panel with OLED display Robust, high-quality drill head cover with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drilling depth stop Continuous speed control via central rotary knob Emergency stop push button Thermal overload protection Spindle stop Drill protection with electrical protection Connection cable with Schuko plug OPTIONS: Machine cabinet with door and drawer Drill package 2 (vice & keyless chuck) ALTERNATIVE: Version with B16 spindle (Art. no.212500)

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Cedpfx Aaoy Hf Nwsgerf Deutschland 3649.63 € 15 mm MK 2 220 mm 40 - 4000 U/min 0,75 kW M12 400 mm 520 mm 850 mm 65 kg 70 mm 85 - 370 mm 300 x 250 mm 70 mm Drilling capacity / normal drilling Performance 15/18 (in E335/ST60) 17 Nm Thread cutting system Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic Drilling depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with Schuko plug 3 years warranty for single shift operation OPTIONS (PRICES ON REQUEST): Machine cabinet with door and drawer Drill package (vice & keyless chuck)

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Condition: Good (the machine has undergone extensive maintenance every year, most recently in March 2026!) Equipment: - iTronic – Adaptive pressure and glue quantity control with automatic, program-dependent fine adjustment - MOT SPS adjustable infeed fence - Automatic chain lubrication: Intelligent automatic transport chain lubrication - Edge Control 19 control system - EL GRM variable, 400V 50Hz, 2.2kW V2 SPRINT 1329 PERFORMANCE 400V 50Hz - Edge Control 19 control system with 18.5" touchscreen color display, 16:9 format - ECO MODE energy-saving mode: An automatic standby circuit - Jointing unit 1802 (2 x 2.0 kW, 200 Hz, 12,000 rpm) with 2 milling units for jointing panel edges - Diamond cutter, Ø 70 x 64 x 30 mm, Z2+2, left-hand rotation, Air Stream System (HOLZ-HER / LEUCO Patent) - Diamond cutter, Ø 70 x 64 x 30 mm, Z2+2, right-hand rotation, Air Stream System (HOLZ-HER / LEUCO Patent) - Edge feed 1901 SYNCHRO: automatic transport of coil and strip material - Glue application station Glu Jet GJ301 automatic (2.3 kW, 50 Hz) - DW501 SPS motorized SPRINT - GM501 spray device after the printing unit with lubricant (recommended for high-gloss edges) - End trimming unit 1918 (60 mm) pneumatic (2 x 0.45 kW, 12,000 rpm) pneumatically tiltable 0/10° - Milling unit FR701: 100% repeat accuracy at the push of a button due to backlash-free mechanics - Air Stream System multi-cutter, diamond Ø 70.9 x 16 mm, Z = 2+2 - Form milling unit FF701: 100% repeat accuracy at the push of a button due to backlash-free mechanics - Diamond cutter, Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4, radius R = 2 mm, left-hand rotation with CM technology - Diamond cutter, Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4, radius R = 2 mm, right-hand rotation with CM technology - Scraper unit 1929 MOT4 incl. high-gloss package with motorized adjustment of the tracing rollers - HW reversible knives for scraper holder, R = 2.0 mm (2 pcs. required) - Flat scraper FK701 with pre- and post-sensing for removing adhesive residue - TR501 spray unit for infeed and outfeed (separating and cleaning agent) - Includes nesting shoes below with their own spray unit Cedpfxszpzy Ij Aagjrf Location: Hesse Availability: Approx. July 2026

Condition: used, Year of construction: 1998, Spindle bore 56 mm (main spindle) Spindle speed (main) 31-6300 rpm Spindle speed (Sub) 5000 rpm Movements: Slide 1 - X/Z - 155/280 mm Codpfxezr Dn He Aagerf Slide 2 -X/Z - 82/130 mm Turret 1: 8 stations (4 rotating/live) - 120 rpm (C-axis) Turret 2: 8 stations Control: Siemens Sinumerik 840 C Equipped with: Chip conveyor 30 pcs. tool holders 8 rotating tool holders Magazine bar feeder model Simag 65.1 - 3200 mm

Condition: used, Year of construction: 2012, functionality: fully functional, Feed rate: 10–18 m/min Workpiece length: min. 160 mm Workpiece width: min. 60 mm Crsdpoztal Refx Aagjf Workpiece thickness: 8–60 mm Cutting thickness: 0.4–8 mm

Condition: used, functionality: fully functional, power: 48 kW (65.26 HP), fuel type: diesel, empty load weight: 7,475 kg, Year of construction: 2010, operating hours: 8,809 h, drive type: Diesel, Mini excavator Technical condition: good Description: Excavator - tracked excavator - mini excavator TAKEUCHI TB 175 - - Year of manufacture 2010 - - 8809 operating hours - - hydraulic quick coupler - - -MARTIN-POWERTILT - - AIR CONDITIONING - - 2 pcs. digging buckets 40 + 60 cm - - 1 pc. ditching bucket 150 cm - - - 4-cylinder YANMAR diesel engine 48.2 kW - - - rubber tracks approx. 50% - - DIESEL FUELING PUMP - - 3rd + 4th control circuit - - 12-volt system - - - good original condition Cedjzqxipspfx Aagsrf Quick coupler, buckets, 3rd valve, 4th valve, rear work light, front work light, heater, fully enclosed cab, air conditioning

Condition: used, functionality: fully functional, power: 42 kW (57.10 HP), fuel type: diesel, empty load weight: 6,710 kg, Year of construction: 2022, operating hours: 1,374 h, drive type: Diesel, Mini excavator Condition: Ready for use and fully functional Codpfx Aaszqxiisgorf Technical condition: very good Description: Track excavator - Takeuchi TB 370 excavator - - AIR CONDITIONING - - Year of manufacture: 2022 - - Model year: 2013 - - 1374 operating hours - - hydraulic quick coupler - - - very powerful MARTIN POWERTILT - - 2 pcs. digging buckets 40 cm + 80 cm - - 1 pc. ditching bucket 130 cm - - 6710 kg operating weight - - - 4-cylinder Yanmar diesel engine 57 hp - - - - REVERSE CAMERA - - - DIESEL FILLING PUMP - - - Excavator in very good condition - - Rubber tracks approx. 80% - - Complete service carried out at 1000 hours - - - Inspection and test drive on-site possible - - Affordable delivery options!!! Quick coupler, buckets, 3rd valve, 4th valve, rear work light, front work light, heater, full cab, air conditioning, CE certificate

Condition: used, Year of construction: 2015, lifting height: 24,800 mm, fuel type: diesel, General information Field of application: Construction Weights Empty weight: 3.340 kg Functional Lifting capacity: 230 kg Working height: 2.680 cm Condition General condition: average Technical condition: average Visual appearance: average Other information TÜV Marked: yes Delivery terms: EXW Max. horizontal reach: 1480 m Max swing of platform in degrees: 225 Transport dimensions (LxWxH): 6,78x2,09x2,97 Production country: DE Additional information Please contact Christian Theißen for more information Manufacturer: Ruthmann Model: TB 270 Year of build: 2015 Condition: Used Data: Max. working height: 26,80 m Max. platform height: 24,80 m Max. reach: 14,80 m Total dimensions LxWxH: 6,78 x 2,09 x 2,97 m Platform dimensions LxW: 1,39 x 0,70 m Max. basket load: 230 kg Swivel range: +/- 225° Ground pressure: 29/19 kN Ground clearance: 0,20 m Crsdeyv Acyepfx Aagjf Support width vertical: 2,09 m Support width one side: 2.77 m (front) / 2.72 m (rear) Support width both sides: 3.51 m (front) / 3.31 m (rear) Support length: 3.95 m wide / 2.97 m narrow Empty weight: 3.340 kg Special features: Rotatable work basket, socket in the work basket, motor on/off switch in the work basket, grounding possible, setup and retraction automatic, memory function. Information: TÜV und UVV new

Condition: good (used), Year of construction: 2021, Turning center GILDEMEISTER/DMG Sprint 20-8 with DMG FANUC Series 32i Model B control, serial number 8104000418B, year of manufacture 2021, operating hours estimated by management at approximately 7,240 hours, chip conveyor, bar feeder FMB Turbo 2-20, serial number 21-301797, year of manufacture. Csdoztdhispfx Aagorf

Condition: good (used), Year of construction: 2007, Turning center GILDEMEISTER/DMG Sprint 42 linear with DMG FANUC 160 control, serial number 2601-0386, year of manufacture 2007, operating hours estimated by management at approximately 41,295 hours, chip conveyor, bar feeder FMB Turbo 5-55. Cedpjztc Sysfx Aagorf

Condition: used, functionality: fully functional, Year of construction: 2014, Takeuchi TB 228 Mini Excavator - Year of manufacture: 2014 TECHNICAL SPECIFICATIONS Parameter Value Operating weight 2,770 kg Maximum digging depth 2,875 mm Maximum dumping height 3,190 mm Maximum reach 4,850 mm Arm length 1,445 mm Rotation speed 10 rpm Traction force 2,873 kg Lifting capacity 530 kg ENGINE Parameter Value Make / Model Yanmar / 3TNV82 Emission standard EPA Tier 4 Cylinders / Displacement 3 / 1.3 L Gross power (SAE J1995) 18.1 kW (24.3 hp) Csdpjtwwufofx Aagsrf Net power (SAE 1349) 17.5 kW (23.5 hp) Rated engine speed 2,400 rpm Fuel tank capacity 53.0 L Fuel consumption (65% full load) 3.0 L Electrical system 12 V / 40 A ELECTRICAL Parameter Value Coolant temperature and fuel level gauge Yes Audible and/or visual signals Yes 12-volt system with 40-amp alternator Yes Work lights Boom, side cover Engine preheater Yes Hour meter Yes Travel alarm Yes UNDERCARRIAAGE AND FRAME Parameter Value Two-speed travel with automatic gear shifting Yes Heavy-duty dozer blade Yes Cast iron protective counterweight Yes Rubber tracks width 300 mm

Condition: used, Holz Her Sprint 1329 Black Edition Heavy-duty version - edge thickness 0.4 - 8 mm (15 mm with tool change) 18.5" touchscreen control, Power-PC color display Motorized, position-controlled bridge height adjustment Pre-milling unit for attachment before the gluing station Automatic infeed guide rail 1350 mm MOT Edge magazine, fully automatic for coil and strip material MOT Glue application station GLU-JET cartridges - hot melt and PU gluing, thin-film technology Edge height max. 60 mm Glue height adjustment / sensor nozzle Cedszdzlmepfx Aagorf High-gloss package Pressing unit 1913 mot., motorized-pneumatic NC servo axis Cutting unit for coil and strip material up to 15 mm edge thickness with electro-pneumatic adjustment of 0-10° bevel of the cutting saw Multi-function milling unit MOT 6 - NC control axes: Flush trimming 8 mm (15 mm) Radius milling Chamfer milling 0 - 15° Copy milling unit MOT 4, corner copying, postforming corners with 4 NC control axes, for milling the upper and lower longitudinal edge and copy milling the front and rear end edges, vertical edge, working height 60 mm Scraping blade unit MOT4 Surface scraping blade unit – finishing Buffing unit for final polishing and edge polishing with 2 textile discs Spray system for infeed and outfeed areas as well as antistatic agent at the pressing unit Infeed area: electronically controlled release agent spray device Pressing unit: electronically controlled antistatic spray device Outfeed area: electronically controlled cleaning agent spray device with cleaning agent First delivery 2018 / from lease return Machine is WORKSHOP OVERHAULED in TOP CONDITION Available from stock, Lieboch

Condition: used, Holz Her Sprint 1321, with edge banding and PU adhesive application Credjzp Hc Uopfx Aagsf Heavy-duty version – edge thickness 0.4 – 15 mm SPS-based Edgecontrol control panel Motorized, position-controlled bridge height adjustment Pre-milling unit for attachment before the gluing station Fully automatic edge magazine for roll and strip material Gluing unit with cartridge system + PU adhesive application Automatic glue height adjustment / touch probe nozzle Pressure unit 1913, pneumatic Trimming unit for roll and strip material 1918 – 15 mm With pneumatic adjustment for trimming saw angle from 0-10° Multi-function milling unit with motorized adjustment: flush trimming – 15 mm, radius and chamfer milling – 15° Profile milling unit – corner rounding 1833 Scraping unit for chamfers and radii 1929, pneumatic Pneumatic infeed and outfeed Surface scraping unit – finishing, pneumatic Buffing unit for finishing and edge polishing with 2 textile discs HIGH-END spraying system Complete set of tooling Machine is in FULLY OPERATIONAL CONDITION Machine from a craft business / consignment sale Available from stock in Lieboch, NET € 21,500.00

Condition: used, Year of construction: 2007, Number of working hours 20456 h spindle hours 75180 h control FANUC 310 i chuck diameter 175 mm turning speeds 5.000 min-1 weight of the machine ca. 8800 kg dimensions of the machine ca. 4500 x 1990 x 2300 mm Number of controlled spindles (C axes): 2 Number of controlled axes: 8 Number of channels: 3 Max. bar diameter: 65 mm Bore in tie rod: 75 mm Chuck diameter: 175 mm Spindle nose: 140 mm Max. speed: 5,000 rpm Nominal torque: 191 Nm Crodpfeydfq Iox Aagjf Nominal power: 20 kW DATA FOR THE W2 AXIS OF THE COUNTER SPINDLE Stroke: 690 mm Rapid traverse: 30 m/min Max. acceleration: 5 m/s² Nominal force: 2,400 N X1 AXIS DATA Stroke: 165 mm Rapid traverse: 40 m/min Max. acceleration: 10 m/s² Nominal force: 2,400 N Z1 AXIS DATA Stroke: 678 mm Rapid traverse: 30 mm Max. acceleration: 5 m/s² Nominal force: 5,000 N Y1 AXIS DATA Stroke: 80(+50/-30) mm Rapid traverse: 30 m/min Max. acceleration: 5 m/s² Nominal force: 5,000 N X2 AXIS DATA Stroke: 165 mm Rapid traverse: 30 m/min Max. acceleration: 5 m/s² Nominal force: 5,000 N Number of tool stations: 12 Tool holder diameter: 30 mm Driven stations: 12 mm Max. speed of driven tools: 4,000 rpm

Condition: used, Year of construction: 2008, bar material dia. 65 mm turning speeds 5.000 min-1 Number of working hours 34979 h spindle hours 72260 h control FANUC 310 i weight of the machine ca. 8800 kg dimensions of the machine ca. 4500x1990x2300 mm Number of controlled spindles (C axes): 2 Number of controlled axes: 8 Number of channels: 3 Max. bar diameter: 65 mm Bore in tie rod: 75 mm Chuck diameter: 175 mm Spindle nose: 140 mm Max. speed: 5,000 rpm Nominal torque: 191 Nm Nominal power: 20 kW DATA FOR THE W2 AXIS OF THE COUNTER SPINDLE Stroke: 690 mm Rapid traverse: 30 m/min Max. acceleration: 5 m/s² Nominal force: 2,400 N X1 AXIS DATA Stroke: 165 mm Rapid traverse: 40 m/min Max. acceleration: 10 m/s² Nominal force: 2,400 N Z1 AXIS DATA Stroke: 678 mm Rapid traverse: 30 mm Max. acceleration: 5 m/s² Nominal force: 5,000 N Y1 AXIS DATA Stroke: 80(+50/-30) mm Rapid traverse: 30 m/min Max. acceleration: 5 m/s² Nominal force: 5,000 N X2 AXIS DATA Stroke: 165 mm Rapid traverse: 30 m/min Max. acceleration: 5 m/s² Nominal force: 5,000 N Cjdpfxsyat Hvj Aagerf Number of tool stations: 12 Tool holder diameter: 30 mm Driven stations: 12 mm Max. speed of driven tools: 4,000 rpm Translated with (free version)

Condition: good (used), Year of construction: 2002, 0,4-3 mm Workingpiece thickness from to 6-45 mm Total length 3700 mm Feed speed 8 m/min. Crjdpfozmy N Nox Aagsf Weight 900 kg

Condition: used, Year of construction: 2016, fuel type: diesel, Lifting capacity: 230 kg Csdpfxezrrxye Aagorf Please contact Gebrauchtgeräte Center for more information