Used Tego C for sale (54,770)

Condition: used, CTS Type: C-40/350 Air-cooled climate testing chamber For sale is a professional CTS climate testing chamber, model C-40/350. This unit is designed for demanding environmental simulations in industry and is ideal for material testing, electronics, automotive, aerospace, and research. Temperature tests: Temperature range -40°C to +180°C Temperature deviation ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 3.5 K/min Cooling 4 K/min Heat compensation approx. 3500 W at +20°C approx. 2000 W at -20°C Climate tests: Temperature range +10°C to +90°C Humidity range 10% to 95% relative humidity Dew point range +5°C to 78°C Temperature deviation ≤ 1.0 K over time Humidity deviation ≤ +3.0% RH over time The technical data refers to an ambient temperature of +25°C, rated voltage 400V, without test specimen, without heat compensation, and without additional equipment. Options may influence the performance data. Technical design: Refrigeration unit air-cooled, low-noise, fully hermetic, stepless power adjustment through electronic monitoring and control system, environmentally friendly refrigerant R404A Test chamber: Floor load 150 kg / m2 Insert grid: Stainless steel, Surface area 620 x 600 mm Load per grid max. 35 kg Total load with max. grid configuration 100 kg Control: 32-bit controller LCD operating panel Digital display of setpoint and actual values Numerical input of setpoints Error messages in plain text RS 232 interface Ethernet interface Free switching channels for on-site test specimen control Dimensions: Test volume 350 liters Internal dimensions: Height 750 mm × Width 650 mm × Depth 715 mm Kdodpfx Apozizmzo Dju External dimensions: Height 1800 mm × Width 920 mm × Depth 1670 mm Operating data: Electrical connection 400V 3/N, 50 Hz Rated power 7.1 kW Rated current 11.5 A Protection class IP 54 Sound pressure level

Condition: used, Weiss   Weiss Technik TS 60 Thermal Shock Test Chamber / 60 L, –71…+220 °C Water-cooled   Item description:   For sale is a Weiss Technik TS 60 thermal shock test chamber. The chamber is ideally suited for rapid temperature cycling tests (e.g., according to IEC, MIL-STD, JEDEC) and has been well maintained.   Volume & Internal Dimensions:   Test volume: 60 liters   Internal dimensions of basket / test chamber (W × D × H): approx. 380 × 430 × 370 mm External dimensions (W × D × H): 895 × 1970 × 1895 mm   Temperature ranges & cycling   Hot chamber +50 °C to +220 °C Cold chamber −72 °C to +70 °C   Transfer time (basket between both zones): < 10 seconds   Heating rate / heating speed up to 17 °C/min Cooling rate / cooling speed up to 3.7 °C/min   In single mode (cold zone only), heating rate: approx. 3.2 °C/min   Temperature deviation & homogeneity   Temporal deviation (temperature control over time): ± 0.3 to ± 1.0 °C   Load / payload & lifting system   Basket / lifting system load: 20 kg maximum load capacity Transfer basket secured by protective grilles on all sides   Other features & equipment   Noise level: approx. 58 dB(A) during operation Control: Touchscreen, RS-232 / USB / Ethernet interfaces   Kdodjzii A Rspfx Ap Deu Electrical connection: 3/N/PE AC 400 V ±10% 50 Hz Rated power approx. 8.5 kW Rated current approx. 25 A Fuse on customer's side 32 A Refrigerant R-404A / R-23   Weight: 800 kg   For your safety as a buyer, please note the following:   The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leakage test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run.   Condition: used   Scope of delivery: (See image)   (Changes and errors in the technical data are subject to change!)   We will be happy to answer any further questions you may have by telephone.

Condition: used, ESPEC Temperature Shock Chamber ESPEC TSA-72EL-A Temperature Shock Chamber Water-cooled For sale is a used ESPEC temperature shock chamber, model TSA-72EL-A from the manufacturer ESPEC CORP. This chamber is suitable for temperature shock tests, temperature cycling tests, material testing, electronics testing, automotive applications, quality assurance, and research and development. Technical Data Manufacturer: ESPEC CORP. Model: TSA-72EL-A Type of equipment: Temperature Shock Chamber System: 2-zone testing with damper switching Design: Air-cooled Test chamber volume: approx. 72 liters Internal dimensions of test chamber (W × H × D): 410 × 460 × 370 mm External dimensions (W × H × D): 1310 × 1900 × 1470 mm Weight: approx. 900 kg Temperature range, hot chamber: +50 °C to +200 °C Temperature range, cold chamber: -65 °C to 0 °C Temperature stability: ±0.5 °C Preheating temperature: up to +205 °C Pre-cooling temperature: up to -75 °C Heating time: from ambient temperature to +200 °C within approx. 15 minutes Cooling time: from ambient temperature to -70 °C within approx. 40 minutes Temperature recovery condition: +125 °C / 30 min. to -40 °C / 30 min. Temperature recovery time: within approx. 5 minutes Max. test chamber load: 30 kg evenly distributed Cable entry: Ø approx. 50 mm Compressed air supply: 0.4 to 0.7 MPa / 4 to 7 bar Refrigerant, high-temperature side: R404A Refrigerant, low-temperature side: R23 Power supply: AC 400 V / 3 phases / 50 Hz Max. current consumption: 45 A Features Color touchscreen control TFT color LCD, 10.4 inches PID temperature control Program memory Trend graphics Alarm history Eco mode Automatic defrost RS-485 interface Over-temperature / under-temperature protection Vertical sliding door Stainless steel test chamber Mechanical cascade refrigeration system Electronic expansion valve Sirocco circulating air fan Damper drive via air cylinder 2 stainless steel test inserts Cable entry, Ø approx. 50 mm Application areas Temperature shock testing Temperature cycling testing Electronics testing Semiconductor testing Kdodjzhkfqopfx Ap Deu Automotive Component testing Material testing Quality assurance Research and development Condition Used Optical condition as shown in the images Scope of delivery 1x ESPEC TSA-72EL-A Temperature Shock Chamber 2x Stainless steel test inserts Accessories as shown in the images Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Inspection possible by appointment. Forklift available for loading. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We would be happy to answer any further questions by telephone.

Condition: used, Mitutoyo   Quick Vision Apex QV-X404P1L-C CNC Image Processing Measuring Machine / Optical Measuring System   Manufacturer: Mitutoyo Corporation Type: QV-X404P1L-C Code No.: 363-131EU Professional CNC image measuring system for non-contact dimensional measurement tasks   For sale is a used Mitutoyo Quick Vision Apex CNC image processing measuring machine, including existing PC system, two monitors, control unit, measuring software, and extensive documentation.   The existing PC system and the installed QVPAK software start up. However, the complete machine and measuring function could not be fully tested.   The Quick Vision series is used for non-contact dimensional measurement of workpieces by means of an optical system, image acquisition, and image processing. Suitable for precise measuring and testing tasks, among others, for components from the fields of electronics, precision mechanics, and industrial manufacturing.   Technical data:   Manufacturer: Mitutoyo Corporation Model: Quick Vision Apex Type: QV-X404P1L-C Code No.: 363-131EU Country of Manufacture: Japan Machine type: CNC image processing measuring machine   Measuring range X / Y / Z: approx. 400 × 400 × 250 mm Measuring principle: non-contact optical image measurement CNC-controlled measuring system   Existing measuring software: Mitutoyo QVPAK QVPAK (R): Version 7.502.0010 QVGEO: Version 7.502.0010 Statistics: Version 7.502.0010   Equipment:   Mitutoyo Quick Vision Apex measuring machine PC workstation Fujitsu Siemens CELSIUS PC system 2 Fujitsu monitors Keyboard and mouse Mitutoyo control unit / joystick with emergency stop QVPAK measuring software Mitutoyo MCOSMOS / MiCAT data carriers GEOPAK documentation Kdodpfx Apsztyabs Dsu QVPAK documentation Other Mitutoyo operating manuals and documents Clamping plate / workpiece fixture as shown in the pictures Connection cables and accessories as shown in the pictures   Application areas:   Optical dimensional inspection Non-contact workpiece measurement Quality assurance Precision metrology Component and contour inspection Manufacturing and process control   Scope of delivery:   Mitutoyo Quick Vision Apex QV-X404P1L-C with PC workstation, monitors, control unit, existing software, documentation, and accessories as shown in the pictures. Scope of delivery is limited to what is shown in the pictures.   Condition:   Used Optical condition according to pictures PC system and existing QVPAK software start up. Signs of wear and tear due to age and use are present. Visible damage / signs of wear are present on the machine housing, see pictures.   Important note: The machine has not been tested, as it is in a protective mode after being moved. This is also intended by the manufacturer when transporting the machine. The machine must be recommissioned by qualified Mitutoyo personnel.   Shipping by freight forwarder is possible. Subject to changes, errors and prior sale.   We would be happy to answer any further questions by telephone.

Condition: used, Vötsch Climate test chamber / temperature test chamber Vötsch VC 4060 climate test chamber Temperature and climate test chamber with humidity, water-cooled (converted to R-452a) For sale is a used climate test chamber from Vötsch Industrietechnik GmbH. The test chamber is suitable for temperature and climate tests, environmental simulation, material testing, quality assurance, as well as development and stress tests. Technical data Manufacturer: Vötsch Industrietechnik GmbH Type: VC 4060 Equipment type: Climate test chamber / temperature test chamber Test chamber volume: approx. 600 liters Controller: S!MCON / 32 Test chamber dimensions: approx. 800 x 800 x 950 mm (W x D x H) Housing dimensions: approx. 1090 x 1960 x 1995 mm (W x D x H) Weight: approx. 600 kg net Temperature range: -40 °C to +180 °C Temperature change rate, heating: approx. 4.0 K/min Temperature change rate, cooling: approx. 3.0 K/min Temperature deviation, temporal: ±0.1 to ±0.5 K Temperature deviation, spatial: ±0.5 to ±2 K Temperature gradient: approx. 1 to 4 K Climate range, temperature: -10 °C to +95 °C Humidity range: 10 % to 98 % RH Humidity deviation: ±0.1 to ±3 % RH Temperature deviation, climate operation, temporal: ±0.1 to ±0.3 K Temperature deviation, climate operation, spatial: ±0.5 to ±1.0 K Temperature gradient, climate operation: approx. 1 to 2 K Refrigerant: R452A Cooling: water-cooled Rated voltage: 3/N/PE AC 400 V ±10 % 50 Hz Rated power: 7.8 kW Rated current: 15.0 A Fuse: 16 A slow-blow, provided by the customer 1 penetration Ø 50 mm, installed on the left 1 penetration Ø 125 mm, installed on the right Test chamber made of stainless steel Touch panel operation Equipment S!MCON / 32 controller Touch panel operation Viewing window in the door Interior made of stainless steel Test chamber lighting Side penetrations Ø 50 mm and Ø 125 mm Shelving / test chamber equipment as shown in the pictures Water-cooled system Documentation / operating manual Accessories as shown in the pictures Areas of application Temperature testing Climate testing Environmental simulation Material testing Electronics testing Kodpfszf E E Tex Ap Dedu Quality assurance Research and development Condition Used Optical condition as shown in the pictures Scope of delivery 1x Vötsch VC 4060 climate test chamber Documentation / operating manual Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection The table shown in the photos, as well as any other items not explicitly mentioned, are not included in the sale. Shipping or forwarding by a freight carrier is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, Year of construction: 2011, Technical details: temperature min.: 1 ° temperature max.: 199 ° electrics - voltage/frequency: 380 / 50 V/Hz heating capacity: 1,8 (1800 Watt) kW protection class: IP 54 total power requirement: 16,2 kW weight of the machine ca.: 0,93 t dimensions L x W x H: 2,85 x 2,0 x 1,4 m Pre-polymerization tunnel - Heat treatment tunnel Application: drying for washing and painting lines - pass through Sold as is and described! Kdedpou Nw E Uefx Ap Dsu other features: -recommended temperature according to manufacturer max. 80°C; safety setting 90°C; heating 230V -with chain conveyor/feed line made of Teflon -chain width 200mm -max. workpiece width 150mm passage W: 150 x H: 110mm, running height 600mm; operation motor SEW Eurodrive (gear motor) power 0,18kW loading W x H: 500 x 800mm unloading door W x H: 600 x 1200mm access door W x H: 800 x 980mm with safety locking system room height 1400mm *

Condition: used, Year of construction: 1991, Technical details: spindle diameter: 100 mm Kjdpfxozk Ezro Ap Dsdu x-travel: 5020 mm y-travel: 1000 mm z-travel: 2000 mm control: Heidenhain 415 B tool taper: SK 50 • For sale without floor plate. • Equipped with an indexable universal milling head, adjustable in 2.5° increments. • 60-position automatic tool changer. • Including Scharmann rotary table (rotation function defective – sold with this known defect). • Rotary table size: 2,500 × 2,000 mm. • The machine can be inspected under power at its location in Saxony, Germany, by appointment upon request. *

Condition: used, Technical details: table diameter: 315 mm rotatability of the table - manual/mechanic: 360 ° Kedpsu N Dz Asfx Ap Dedu weight of the machine approx.: 100 kg dimensions: 620 x 530 x 135 mm The tables were rarely used other features: -with radial scale -surface is finished -center mounting MK3 -dividing circle 19 / 27 / 31 / 41 / 49 / 59 -operation also possible by machine via coupling on both sides (switchable right-/left-hand rotation with automatic changeover) -foot clamping: support size 360 x 420mm with 1 clamping groove on the front side 16 x 200mm *

Condition: used, CTS Type: TSS-70/130 Water-cooled cooling unit For sale is a high-quality temperature shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/130. The device is used for performing temperature shock tests and is typically used in industry, research, and quality assurance. Application areas: Material tests Kdjdjy Hkd Hspfx Ap Dju Aging tests Electronics and component tests Temperature shock and cyclic temperature tests Technical data: Type: TSS-70/130 Test volume: 130 liters Temperature range: Hot chamber: +50°C to +200°C Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from room temperature to +180°C Cooling rate: approx. 4 K/min from room temperature to -60°C Temperature deviation: ±1 K in time ±2 K spatially Temperature change rate: max. 100 K/min on average for shock test tests without heat input Temperature adjustment rate: ≤ 15 min in the range of -65°C to +200°C with 10 kg of ICs Cycle time: < 10 seconds Electrical data: Connection: 400 V, 3/N, 50 Hz Rated power: approx. 17.2 kW Rated current: approx. 29 A On-site protection: 32 A slow-blow fuse Connection: Cekon 32 Refrigeration system: Refrigerant: R404A / R23 water-cooled, low-noise, fully hermetic Equipment / Features: CTS control panel Microprocessor-controlled control and monitoring system Program operation up to 100 test programs possible digital setpoint and actual value display RS232 interface 2 free switching channels for on-site control of the test specimen Fault message on potential-free contact Load up to 30 V DC, 2 A EMC tested Technical design: Hot and cold chamber Mobile frame with lifting spindle drive Test chamber / mobile frame made of stainless steel, material no. 1.4301 Insert basket made of stainless steel wire Pipe passage NW 50 with sealing plug Compressed air connection 1/4" AG Condensate drain non-pressurized R 1/2" internal thread Safety door lock lockable door with window Dimensions according to installation diagram: External dimensions approx.: 2335 x 940 x 1820 mm Loading dimension approx.: 1990 x 940 x 1652 mm Test chamber dimensions: height approx. 410 mm Width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Other data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh For your safety as a buyer, the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: see pictures (Changes and errors in technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, Vötsch Type: VT 7012 S2 Water-cooled version Vötsch temperature shock test chamber / environmental simulation system Model: VT 7012 S2 Two-chamber system (hot / cold chamber) For sale is a high-quality Vötsch temperature shock test chamber for rapid temperature change tests in industry, research, and development. The device is in used condition. See pictures for optical condition. Control panel and observation window are included. Temperature data: Hot chamber: +50 °C to +220 °C Cold chamber: -80 °C to +70 °C Temperature deviation over time: ±1 K Temperature deviation spatially: ±2 K Heating rate hot chamber: approx. 11 K/min Heating rate cold chamber: approx. 2 K/min Cooling rate cold chamber: approx. 3 K/min Test chamber: Test chamber volume: approx. 125 liters Internal dimensions: approx. 470 x 650 x 410 mm Cable entry: Ø approx. 67 mm Dimensions: Kdsdpfxjy Iyuwo Ap Dju External dimensions: approx. 930 x 2115 x 1970 mm Electrical data: Mains connection: 3/N/PE AC 400 V ±10% / 50 Hz Rated power: approx. 10 kW Rated current: approx. 25 A Refrigerant according to nameplate: R404A: 2.9 kg R23: 1.27 kg Operating pressure ND: max. 22.5 bar Operating pressure HD: max. 25 bar Weight: approx. 1000 kg Equipment / Features: Two-chamber shock test system Rapid temperature change testing Digital control / display Program operation Observation window Cable entry Water-cooled version For your safety as a buyer, the following information: The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Scope of delivery: Vötsch VT 7012 S2 temperature shock test chamber Scope of delivery as shown in the pictures Condition & Notes: Condition: used Inspection possible by arrangement Loading can be organized (Changes and errors in technical data are subject to change!) We would be happy to answer any further questions you may have on the phone.

Condition: used, operating hours: 1,010 h, load capacity: 200 kg, fuel type: electric, Year of construction: 2007 Empty weight: 6.700 kg GVW: 6.900 kg Dimensions (LxBxH): 605 x 150 x 197 cm Mast: articulated arm Kedpfxszb Na Ij Ap Dedu Working height: 1.500 cm

Condition: good (used), Year of manufacture: 2020 Operating hours: 536 CE mark: yes Technical condition: good Visual appearance: good Delivery terms: EXW Production country: JP Please contact Vink Machinery for more information Maeda MC285C WME-3 * 2020 * Diesel and 380 volts Kodpem Nb Tljfx Ap Dedu * 536 working hours * 8.7 meter hook height * 8.2 meters horizontal reach * 2820 kg lifting capacity * Remote control * Inspection until June 2024 * 2160 kg own weight * including documents

Condition: good (used), mileage: 167,859 km, power: 84 kW (114.21 HP), first registration: 02/2022, fuel type: diesel, tire size: 235/65R16, axle configuration: 4x2, wheelbase: 4,330 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, total length: 7,450 mm, total width: 2,020 mm, total height: 2,750 mm, loading space length: 4,730 mm, loading space width: 1,770 mm, loading space height: 1,960 mm, Equipment: ABS, Apple CarPlay, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, parking heater, power mirror, traction control, = Additional Options and Accessories = - Heated mirrors - Halogen lamp - None - Manual - Radio/cassette - Rearview camera - Fabric - Blind spot sensor - Partition = Notes = Kjdpfjzddxdox Ap Dedu Configuration: 4x2, Payload: 807 kg, Unladen weight: 2393 kg, Gross vehicle weight: 3200 kg, Trailer load, unbraked: 750 kg, Trailer load, center axle, braked: 2000 kg, Cab type: Single cab, Cruise control, Air conditioning, Number of airbags: 1, Auxiliary heater, Parking assistance: Front and rear, Electric windows, Electric mirrors, Partition, Radio/cassette, Carplay, Color: White, Heated mirrors, Rearview camera, Lighting type: Halogen lamp, Air conditioning, Bluetooth, Blind spot sensor, Engine power: 84 kW (113 hp), Number of cylinders: 4, Displacement: 1950 cc, Fuel: Diesel, Euro: 6, Drive technology: Timing chain, Transmission type: Automatic, Power steering, ABS, ASR, Starter battery, Side wall paneling, Rear step, Roof rack: None, Side doors: 1, Rear closure: Double door, Central locking, Number of seats: 2, Seat arrangement: 1+1, Seat cover: Fabric, Seat adjustment: Manual, XXL L4 ac aut EURO6 carplay cruisecontrol sprung seat camera, Tire type: Summer tires = Further Information = General Information Number of doors: 1 License plate: VNP-67-Z Axle Configuration Tire size: 235/65R16 Brakes: Disc brakes Suspension: Leaf spring suspension Axle 1: Tire tread depth left: 2 mm; Tire tread depth right: 1 mm Axle 2: Tire tread depth left: 3 mm; Tire tread depth right: 2 mm Weights Unladen weight: 2,393 kg Payload: 807 kg GVW: 3,200 kg Functional Loading platform height: 68 cm Condition Technical condition: good Optical condition: good Damage: none Number of keys: 4 Financial Information Leasing price: 433 € per month (delivery van, 72 months); Ask for further information and conditions.

Condition: excellent (used), lifting height: 22,000 mm, General information Year of manufacture: 2022 Operating hours: 2.329 Weights Empty weight: 4.700 kg Functional Lifting capacity: 3.990 kg Dimensions of cargo space: 430 x 80 x 193 cm CE mark: yes Condition Technical condition: very good Visual appearance: very good Other information Kdedjzlha Topfx Ap Dju Delivery terms: EXW Production country: NL Additional information Please contact Vink Machinery for more information = Additional options and accessories = - Hook blocks = Remarks = Hoeflon C10 * 2022 * Diesel and 400 Volt drive * 2,329 Operating hours * Fly jib * Hoisting winch max 4,000 kg * Non-marking tracks * Remote control * 22 meter hook height * 19.8 meter horizontal reach * Unlimited swing rotation * Recently replaced slewing ring * 3,990 kg lifting capacity * 4,700 kg dead weight

Condition: good (used), mileage: 361,575 km, power: 338 kW (459.55 HP), first registration: 04/2023, fuel type: diesel, tire size: 315/70R22,5, axle configuration: 4x2, wheelbase: 3,760 mm, fuel: diesel, brakes: retarder, color: blue, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 6,100 mm, total width: 2,550 mm, total height: 3,750 mm, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, parking air conditioner, parking heater, power mirror, retarder, seat heater, tachograph, traction control, = Additional Options and Accessories = - 2nd diesel tank - Heated mirrors - Carplay - Digital tachograph - Fixed - Halogen lamp - Highline - Manual - Radio/cassette - Lane keeping assist - Fabric - Auxiliary braking system = Notes = Number of axles: 2, Configuration: 4x2, Tare weight: 8281 kg, Gross vehicle weight: 19000 kg, Total tank capacity: 1095 liters, 2nd diesel tank, Height of fifth wheel coupling: 113 cm, Fifth wheel coupling: Fixed, Number of locks: 1, Winch pulling capacity: 375 tons, Suspension type: Air suspension, Type of cab: Highline, Cruise control, Trip recorder (control unit), Digital tachograph, Air conditioning, Number of airbags: 8, Auxiliary air conditioning, Auxiliary heater, Electric windows, Electric mirrors, Radio/cassette, Carplay, GPS navigation, Color: Blue, Heated mirrors, Lighting type: Halogen lamp, Lane keeping assist, Climate control, Seat heating, Bluetooth, Engine power: 338 kW (453 hp), Engine displacement: 12742 cc, Fuel: Diesel, Euro: 6, Transmission type: Opti-cruise, Transmission type: Scania, Gears: 12, Auxiliary braking system, Retarder brand: Scania, Power steering, ABS, ASR, Central locking, Seat configuration: 1+1, Seat cover: Fabric, Seat adjustment: Manual, HL, auxiliary air conditioning, 2x tank = Additional Information = Transmission Transmission: SCA, 12 gears, Automatic Axle Configuration Tire size: 315/70R22.5 Brakes: Disc brakes Axle 1: Steered; Tire tread depth left: 10 mm; Tire tread depth right: 12 mm; Suspension: Leaf spring suspension Axle 2: Double tires; Tire tread depth left inner: 12 mm; Tire tread depth left outer: 12 mm; Tire tread depth right inner: 12 mm; Tire tread depth right outer: 12 mm; Suspension: Air suspension Weights Unladen weight: 8,281 kg Payload: 10,719 kg GVW: 19,000 kg Maintenance APK (Technical Inspection): valid until 11.2026 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial Information Leasing price: €1,091 per month (default, 72 months); Ask for more information and conditions Identification License plate: KLEYN1 = Company Information = Kleyn Trucks is one of the largest independent used vehicle dealers in the world. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our offer includes all European brands from various production years and price ranges. Why buy from Kleyn Trucks? It's simple! • Large, rapidly changing stock • Recognizable quality • A good price • Correct business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged Kodpfezazwijx Ap Dsdu • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Calculate your leasing rate quickly and send an inquiry via our website. Ask directly about our European warranty package.

Condition: good (used), Year of construction: 2007, Drying oven, drying cabinet, chamber dryer oven, preheating oven, heating chamber, drying oven, drying cabinet, drying and heating cabinet, universal oven -Manufacturer: Delair, Drying cabinet universal oven type SPX ED-400-TC -Usable space: 500/4070/525 mm -Heating power: 2000 W -Nominal temperature: 50 - 300°C -Voltage: 230 V -Dimensions: 760/720/H915 mm -Weight: 87 kg Kdedpfxoz Tfc To Ap Dju

Condition: used, total length: 1,200 mm, total width: 800 mm, total height: 2,100 mm, Year of manufacture: 2026 Colour: Blue Empty weight: 540 kg Price: On request - Year: 2026 - Documentation available: Yes - CE marking present: Yes - Operating hours: 0 - Drive system: Conventional - Press model: Workshop press - Press configuration: Single-acting - Press force [ton]: 60 - Max. stroke [mm]: 380 Kdsdpez U U Dpefx Ap Dou - Table length [mm]: 1000 - Table width [mm]: 300 - Ram length [mm]: 100 - Throat depth [mm]: 750 - Height adjustment [mm]: 750 - Pressing speed [mm/s]: 10 - Options: Verplaatsbare cilinder - Column spacing width [mm]: 750 - Transport dimensions: 1200mm x 800mm x 2100mm (l x w x h) - Transport weight [kg]: 540kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Indramat MAC 112D-0-ED-2-C/130-B-1/S005 permanent magnet synchronous motor, serial number: 68352, professionally and completely refurbished and tested, with a 12-month warranty, 100% functional. Scope of supply as shown in the photos. The agreed-upon sales discounts do not apply to this item. Please request the price separately! ATTENTION: Please enquire about the costs for packaging and shipping separately! Kdodpfei D Ii Iex Ap Dsu

Condition: ready for operation (used), Indramat MAC093B-0-GS-4-C/110-B-0/WI522LV permanent magnet motor, serial number: MAC093-24699, professionally and completely overhauled and tested, comes with a 12-month warranty, 100% functional. Scope of supply as shown in the photos. The agreed-upon sales discounts do not apply to this item. Please request the price separately! Kdedpoi D Ipbofx Ap Deu

Condition: ready for operation (used), Indramat 112A-0-ZD-4-C / 130-B-0 / WI572LV / S005 Permanent magnet synchronous motor + Heidenhain Rod 1424.003-600 encoder. 250 040 12, serial number as shown in the photo, used, professionally and completely overhauled and tested, with a 12-month warranty, 100% functional, scope of delivery as shown in the photos. Kdedpfx Aoi D Ipqep Dou

Condition: used, total length: 1,200 mm, total width: 800 mm, total height: 2,200 mm, Year of manufacture: 2026 Colour: Blue Empty weight: 970 kg Price: On request - Year: 2026 - Documentation available: Yes - CE marking present: Yes - Operating hours: 0 - Drive system: Conventional - Press model: Workshop press - Press configuration: Single-acting - Press force [ton]: 100 - Max. stroke [mm]: 380 - Table length [mm]: 1000 - Table width [mm]: 300 - Ram width [mm]: 120 - Throat depth [mm]: 1000 - Pressing speed [mm/s]: 10 - Column spacing width [mm]: 1000 - Transport dimensions: 1200mm x 800mm x 2200mm (l x w x h) - Transport weight [kg]: 970kg - Transport packages [pcs.]: 1 Financial information Kdodpfo Aacybjx Ap Dju VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, mileage: 148,850 km, power: 130 kW (176.75 HP), first registration: 07/2020, fuel type: diesel, overall weight: 7,490 kg, axle configuration: 2 axles, next inspection (TÜV): 01/2027, color: blue, gearing type: automatic, emission class: euro6, loading space volume: 31 m³, loading space length: 5,200 mm, loading space width: 2,480 mm, loading space height: 2,380 mm, Year of construction: 2020, Equipment: ABS, air conditioning, electronic stability program (ESP), ATEGO 818 L Flatbed/Tarp, 5.20 m * Air conditioning + 3-seater * Engine version EURO 6 D * Vehicle number for customer inquiries: 4555 * Active Brake Assist Kodpjycm Ixofx Ap Dsdu * Air conditioning * Middle seat, with 3-point seatbelt * Engine version EURO VI, D * Lane Keeping Assist * Environmental badge (green) * High Performance Engine Brake * Air suspension, rear axle * Air deflector, lockable * Rain/light sensor * Regularly maintained according to service schedule * Stability Control Assist (ESP) * Three-seater * Electronic braking system with ABS and ASR * Driver's air-suspension seat, standard * Power windows, electric, on both sides * Mercedes PowerShift 3 * Reversing warning, combined with hazard warning lights * Locking system, with central locking * Exterior sun visor, transparent * Cruise control * AdBlue tank 25 l * Roof hatch/ventilation flap * Transmission G 70-6/5.94-0.74 * Main mirrors, electric, driver's side * Heating, electronic compressed air supply unit * Plastic tank 120 l, left * Engine OM934, R4, 5.1 l, 130 kW (177 hp), 750 Nm * Wheelbase 3620 mm * S-cab ClassicSpace, 2.30 m, tunnel * Stabilizer, under frame, rear axle * Front spring 4.0 t, parabolic * Pre-equipment for toll collection * Tires tubeless, 235/75 R 17.5 front * Tachograph digital, 2nd generation * Weight variant 7.99 t (3.6/5.0) No liability for printing and typographical errors Sales only to commercial customers Errors and prior sales excepted* Changes, prior sales and errors are expressly reserved. The description serves to identify the vehicle and does not constitute a guarantee in the legal sense. The description according to the purchase contract is decisive. * TOP SERVICE + QUALITY * We will gladly provide you with a LEASING/FINANCING/HIRE PURCHASE offer Guarantee insurance possible upon request from the insurer * TÜV / UVV LBW / Tachograph inspection and installation of OBU device by our local partners * Customs license plates for 30 days All customs documents for export are possible, but must be requested individually * TOLL for Toll-Collect can be booked in-house * Free transfer from Stuttgart Airport or Metzingen (Württemberg) train station * TRAIN STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP number * ---- Visit us on our website at * constantly over 200 vehicles in stock

Condition: used, mileage: 22,811 km, power: 115 kW (156.36 HP), first registration: 03/2020, fuel type: diesel, overall weight: 7,490 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 2, loading space volume: 38 m³, loading space length: 6,200 mm, loading space width: 2,480 mm, loading space height: 2,500 mm, Year of construction: 2020, Equipment: ABS, air conditioning, electronic stability program (ESP), ATEGO 816 L Flatbed/Tarpaulin 6.20 m * AIR CONDITIONING + Rear Axle Air Suspension * ORIGINAL mileage approx. 22,800 km * Vehicle No. for customer inquiries: 4644 * Active Brake Assist * Air conditioning * Engine spec EURO VI, D * Lane Keeping Assist * Rear axle air suspension * Stability Control Assistant (ESP) * Electronic braking system with ABS and ASR * Comfort driver's suspension seat * Electric windows, both sides * Transmission G 70-6/5.94-0.74 * Mercedes PowerShift 3 * Standard engine brake * Cruise control * 25 L AdBlue tank * Roof hatch/roof ventilation flap * Main mirror, electric, driver’s side * 120 L plastic tank, left * Engine: OM934, R4, 5.1 L, 115 kW (156 HP), 650 Nm * Wheelbase 4,220 mm * Tubeless tires, 215/75 R 17.5 front/rear * S-Cab ClassicSpace, 2.30 m, tunnel * Stabilizer under frame, rear axle * Pre-equipment for toll recording * Digital tachograph, 2nd generation * Emissions sticker (green) * Two-seater * Full service history * GVW variant 7.49 t (3.4/4.6) No liability for print or typographical errors Sale only to commercial customers Subject to prior sale and errors. Changes, prior sale and errors expressly reserved. The description serves to identify the vehicle and does not constitute a warranty in the legal sense. The purchase contract description is binding. * TOP SERVICE + QUALITY Kdedpfx Apsyvmgve Dju * We can offer you LEASING, FINANCING, or HIRE PURCHASE options Warranty insurance available on request from the insurer * TÜV/UVV LBW/tachograph test and installation of OBU device by our local partners * Export plates for 30 days All export documents possible, but must be requested individually * Toll-Collect toll payment can be arranged on site * Free transfer from Stuttgart airport or Metzingen train station (Württ) * ARRIVAL BY TRAIN: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP number * * ---- Visit us on our website at * more than 200 vehicles in stock at all times

Condition: used,

Condition: used, Year of construction: 1998, Format: 520 x 740 mm Equipment: 4 Colors Offset press + Coater axial, circumferential diagonal remote control SAPC - Semi-automatic plate change Kedpfjx R Dk Usx Ap Dodu Komorimatic damping All wash-up device automatic PQC: console for ink, Chromed Cylinders Water temperature controller AEC The press comes with a significant spare part package.