Used Telescopic Belt for sale (11,325)

Condition: used, Year of construction: 1985, Used machine Year of construction: 1985 Condition: according to age Equipment and technical data: Table size 2800 x 1250 mm max. usable sanding length between the machine stands 2600 mm Sanding width with one transverse table movement 1000 mm Passage under belt, table height adjustment electric 340 mm Nlsdpfx Aowka Szelcjc Motor 5.5 kW Reversing switch for left and right belt rotation Belt speed 22 m/sec Weight 900 kg Availability: short term Location: Solingen

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 5 h, load capacity: 2,500 kg, lifting height: 5,850 mm, fuel type: diesel, mast type: telescopic, construction height: 1,920 mm, power: 55 kW (74.78 HP), fork length: 1,200 mm, empty load weight: 4,710 kg, total length: 3,894 mm, drive type: Diesel, construction width: 1,813 mm, Telescopic handler, rigid frame Load center: 500 Mast type: Telescopic Transmission: Hydrostatic Speed class: 20 Condition: New Technical condition: New Front tire type: Pneumatic Front tire size: 12 R Front tire condition: 80 - 100% Rear tire type: Pneumatic Rear tire size: 12 R Rear tire condition: 80 - 100% Description: The MT 625 H telescopic handler is designed for use on construction sites for new builds and for renovations on low-rise buildings. The compact machine, with a width of 1.80 m and a height of less than 2 m, easily passes through doors and can maneuver well on congested construction sites. Its turning radius of 3.30 m and the 3 available steering modes ensure excellent maneuverability. This telescopic handler is easy to operate and is equipped with an ergonomic dashboard and the JSM joystick, which guarantee easy handling. The MT 625 H has a lifting capacity of 2.5 t and a lifting height of 5.85 m. Its 75 hp engine enables a speed of 25 km/h. Maintenance work is facilitated by the large opening of the engine compartment. The 90 l gear pump enables simultaneous movements of the boom and the telescope, thus providing an increase in productivity. 3rd valve, full cab, air conditioning, CE certificate. Nlsdpfx Aljzgyb Eococ

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 5 h, load capacity: 1,200 kg, lifting height: 4,000 mm, fuel type: diesel, mast type: telescopic, construction height: 1,920 mm, power: 26 kW (35.35 HP), empty load weight: 4,710 kg, total length: 3,470 mm, drive type: Diesel, construction width: 1,490 mm, Rigid telehandler Load centre: 500 Mast type: Telescopic Transmission: Hydrostatic Speed class: 20 Condition: New unit Technical condition: New Front tyres type: Pneumatic Front tyres size: 12 R Front tyres condition: 80 - 100% Nledezgybxjpfx Alcsc Rear tyres type: Pneumatic Rear tyres size: 12 R Rear tyres condition: 80 - 100% Third hydraulic valve, rear work light, front work light, heating, full cab, CE certificate,

Condition: used, Year of construction: 2026, total length: 10,030 mm, Telescopic work platforms Magni DTB24RT Drive Diesel Year built 2026 Work height (mm) 24,800 Njdpfoy A Tngsx Alcslc

Condition: used, Belt conveyor Aagaard Finnrose, Length 3.500 mm with light barrier at the end of the belt for transport stop - Producer MinkDK - Length 1.700 mm - Working width 1.200 mm - Belt with 1.220 mm - Working height 900 + - 30 mm - Length 1.300 mm - FU-controlled Feed speed 2 - 10 m/min - Location, in stock - Voltage / HZ 230/50 Nedpfozf N Nvex Alcelc

Condition: used, - Producer APP - Type GBT - Working width 1.300 mm - Working height 900 mm + - 20 mm - Length 2.750 mm - Belt control system - Location, in stock - Voltage / HZ 400 / 50 - Motor power 0,55 kW Nodozf N H Ijpfx Alcjlc

Condition: new, Year of construction: 2026, New machine Year of manufacture: 2026 Equipment and technical specifications: - Usable WORKING WIDTH mm: 950 - SANDING BELT LENGTH mm: 670/970 x 2150 - MAX. WORKPIECE THICKNESS mm: 160 - STEEL CALIBRATING ROLLER mm: 150 - SANDING PAD WIDTH mm: 50 - BELT MOTOR POWER HP: 10 - BELT SPEED m/s: 18 - FEED MOTOR POWER HP: 0.75 - Variable speed feed conveyor with infinitely adjustable speed, m/min: 4/20 - HEIGHT ADJUSTMENT MOTOR HP: 0.33 - Mechanical BELT OSCILLATION “ECO GEAR PATENT SYSTEM” - 1 pc. DRUM BRAKE for belt braking - Swiveling ROLLER for belt tensioning - 2 pcs. PRESSURE ROLLERS with rubber coating - EMERGENCY STOP BAR at the infeed - ELECTRONIC DISPLAY for workpiece thickness - 2 pcs. ROLLER TABLES each with 2 rollers at infeed and outfeed Nodpfx Asy I Eqwslcolc - 1 EXTRACTION CONNECTION with 160 mm diameter - AUTOMATIC TABLE POSITIONING BASIC MACHINE ACCORDING TO CE STANDARD PLEASE NOTE: New patented belt oscillation system 1. No valves 2. No light barrier 3. Not sensitive to dust 4. Energy-saving, environmentally friendly system The machine model with this system has been running non-stop since 2008 without lateral belt drift! Including special equipment: 11 kW motor Pneumatic sanding pad incl. feed-synchronized control Location: Flörsheim Availability: short notice

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 MACHINE SEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. Equipment and technical specifications: The Master brings grinding to the point. It embodies the essence of our 75 years of experience in grinding technology. This means that it combines all the features essential for the fast, reliable production of perfect surfaces right out of the box. Nothing more, nothing less. The core model, the Kündig Master, is equipped with a calibration roller and a sanding pad unit and features a proven design that guarantees decades of high sanding precision – and all this across the generous working width of 1350 mm. A control unit is also on board, which quickly and easily achieves the desired result. The Sanding Units – Proven Combination The sanding units rely on the proven combination of calibration roller and sanding pad. For secure workpiece guidance, a parallel spring-loaded steel pressure roller is located at the machine inlet, and rubber pressure rollers are located between the sanding units. Calibration Unit (R): The calibration unit is a grooved rubber contact roller of proven hardness. It is ideally suited for calibration tasks, even with high chip removal rates if necessary. The level of the contact roller is continuously adjustable to compensate for the thickness of the abrasive grain. Segmented sanding pad (E): With the E-Plus configuration, the fine sanding unit features a segmented, electronically controlled sanding pad with a scanning width of 35 mm instead of the pneumatic version. This allows for even more precise fine sanding in the edge area of the workpieces. The edge pressure of the sanding segments is automatically controlled, but can also be precisely adjusted on the touchscreen to more precisely influence the sanding around the workpiece edges. Changing the graphite sliding coating is also quick and easy. The features - In a nutshell Construction: In terms of robustness and durability, the Master is in no way inferior to our other model series. It features the same solid construction that makes all our machines a forward-looking investment and is designed to deliver precise sanding results even after many years. Nlodpfew Naanox Alcjc Top adjustment: For over three decades, we have equipped our machines exclusively with top adjustment. Why? While more complex in design than table adjustment, it is also superior in many respects. The machine can handle heavier workpieces, maintains its precision more reliably, and offers the advantage of a constant working height. Workpiece dimensions: The upper section, i.e., the through-hole, is motorized and can be finely adjusted via a touchscreen. The maximum through-hole height is 160 mm. With a working width of 1350 mm, the Kündig Master offers a generous, tried-and-tested standard size.

Condition: used, Used machine Condition: age-appropriate table size 2600 x 900 mm max. usable sanding length 2500 mm Belt length 7100 mm x 150 mm 1100 mm offset right motor 5,2 kW Nodpfx Asw I U Hyelcolc Shipping dimensions: 4300x1650x1800 mm weight: 620 kg Availability: short term Location: Flörsheim

Condition: used, Used machine Year of manufacture: 1981 Features and technical data: Motor 5.2/7.5 kW, pole-changeable 750/1500 rpm Belt speeds: 11 and 22 m/sec With attached blower motor 2.2 kW (2840 rpm, air flow 2400 m³/h) Table size: 2900 x 1400 mm Usable working length: 2700 mm Table stroke: 320 mm Belt dimensions: 7800 x 150 mm Including pneumatic pressure shoe with belt brake Nljdpfx Aex H U Nmslcec Extraction nozzle: 180 mm Air requirement: 2 l/min at 6 bar Weight: 1300 kg Availability: short notice Location: Röllbach

Condition: used, Used machine Fitting drilling machine Cup band drilling machine Fitting drill (Grass drilling pattern) Nljdpfx Asw I Uwxslcoc 6 drilling spindles in series (32 pitch) (one spindle of the 8 drill head is defective) 4 further drilling spindles upstream for cup drillings Pneumatic hold-down stop depth adjustment Connection: 16 A / 380 V Motor: 1.5 kW Weight approx. 100 kg Dimensions: 3,130 x 1,060 x 710 mm Availability: short term Storage location: Flörsheim

Condition: used, Year of construction: 1991, Used machine Year of construction: 1991 Machine completely serviced and checked Working width: 1100 mm Working height: 140 mm Height adjustment: electric Workpiece thickness display: digital Aggregates: 2 1st unit: Combination unit (roller - shoe) with electronic link sanding shoe 2nd unit: Shoe unit, electronic segment shoe with vacuum transport carpet Dedusting brush: yes Motor power: 2 x 15kW Nlsdow I U N Ispfx Alcjc Power consumption: 65A Suction connection: 4 x 200mm Sanding belts 1120 x 1900 Weight: 3500kg Availability: short term Storage location: Hochheim

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 5 h, load capacity: 2,500 kg, lifting height: 5,850 mm, fuel type: diesel, mast type: telescopic, construction height: 1,920 mm, power: 55 kW (74.78 HP), fork length: 1,200 mm, empty load weight: 4,710 kg, total length: 3,894 mm, drive type: Diesel, construction width: 1,813 mm, Telescopic handler, rigid frame Load center: 500 Mast type: Telescopic Transmission: Hydrostatic Speed class: 20 Condition: New Technical condition: New Front tire type: Pneumatic Front tire size: 12 R Front tire condition: 80 - 100% Rear tire type: Pneumatic Rear tire size: 12 R Rear tire condition: 80 - 100% Njdpfx Aezgpbbolcolc Description: The MT 625 H telescopic handler is designed for use on construction sites for new builds and for renovation work on low-rise buildings. The compact machine, 1.80 m wide and less than 2 m high, easily passes through doors and can maneuver well on congested construction sites. Its turning radius of 3.30 m and the 3 available steering modes ensure excellent maneuverability. This telescopic handler is easy to operate and is equipped with an ergonomic dashboard and the JSM joystick, which guarantee easy maneuverability. The MT 625 H has a lifting capacity of 2.5 t and a lifting height of 5.85 m. Its 75 hp engine enables a speed of 25 km/h. Maintenance work is facilitated by the large opening of the engine hood. The 90-liter gear pump enables simultaneous movements of the boom and the telescope, thus increasing productivity. 3rd valve, full cab, CE certificate.

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 2,300 h, load capacity: 2,500 kg, lifting height: 5,850 mm, fuel type: diesel, mast type: telescopic, construction height: 1,920 mm, power: 55 kW (74.78 HP), fork length: 1,200 mm, empty load weight: 4,710 kg, total length: 3,894 mm, drive type: Diesel, construction width: 1,813 mm, Rigid telehandler Load centre: 500 Mast type: telescopic Transmission: hydrostatic Speed class: 20 Condition: Refurbished without warranty Technical condition: normal Front tyre type: pneumatic Front tyre condition: 80 - 100% Rear tyre type: pneumatic Nsdpfx Ajzgpa Dslcelc Rear tyre condition: 80 - 100% 3rd hydraulic valve, full cab, air conditioning,

Condition: used, Year of construction: 1994, Grinding length: 2600 mm Grinding width: 850 mm Dust extraction nozzle diameter: 180 mm Motor: 4 kW Speed: 1430 rpm Njdozg Nawopfx Alcslc Belt speed: 22 m/s Weight: approx. 700 kg Location: Customer

Condition: used, Year of construction: 1983, Used machine Year of manufacture: 1983 Features and technical data: with 2 combination units with 2 contact rollers, 1 x 65° shore, 1 x 85° shore and 2 air sanding shoes Sanding width: 1350 mm Abrasive belt dimensions: 1360 x 1900 mm Maximum workpiece thickness: 150 mm 1st unit with 15 kW 2nd unit with 15 kW Nledpfx Aley Dkhgecjc Cleaning brush Roller table at infeed Roller table at outfeed Infinitely variable feed speed: 2.5 to 12.5 m/min Weight approx. 3700 kg Availability: approx. May/June Location: Thuringia

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Tube diameter outside: 180 mm -Piston: Ø 115/145 mm -Stroke: 620 mm -Weight: 87 kg Nledpfxsb A H Rye Alcjc

Condition: good (used), Hydraulic cylinders, telescopic cylinders, telescopic hydraulic cylinders -Design: single-acting telescopic cylinder -Retracted length: 750 mm -Extended length: 2920 mm -Stroke: 2170 mm -Piston rod diameter: 86/107/129/152 mm -Outer diameter: 180 mm Quantity: 1 piece available -Dimensions: 500/500/H750 mm -Weight: 190 kg Nledpfx Alob A Hmuscec

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Features and technical data: - Constant working height - Equipped with combination unit featuring steel contact roller and electronic CPS segmented pressure beam with 25 mm divisions - Sanding width: 1100 mm - Sanding belt length: 1900 mm - Workpiece thickness min./max.: 3 - 150 mm - Feed speed: infinitely variable, 2.5 - 13 m/min - Sanding unit: 11 kW Paint package: - Infinitely variable belt drive speed via frequency inverter - Belt air-blast device - Vacuum conveyor belt with blower Control: - Terminal with 50 program memory slots - Simple menu guidance with plain text display - Visual indication of active elements during operation - Fully automatic PLC-controlled start sequence for all drives Nljdowka Snjpfx Alcec - Digital recording of operating hours Includes cleaning brush Roller table at infeed Roller table at outfeed Extraction capacity: 1850 m³/h Extraction connectors: 1 x 180 mm, 1 x 140 mm, 2 x 100 mm Compressed air connection: 6-8 bar Air requirement: 10 l/min Weight: 2,200 kg Availability: by arrangement Location: Röllbach

Condition: used, Year of construction: 1997, Used machine Year of manufacture: 1997 1 belt sanding machine with combination unit with electronic segmented pressure bar for sanding soft and hard veneers Calibrating and fine sanding of solid wood Calibrating of workpiece carrier plates Sanding of defective veneers and coatings Intermediate sanding of PU, hydro, UV, nitro, and polyester coatings Nlodpfx Aoyulfmelcjc Sanding of barrier films with graphic operator terminal CNC-controlled thickness adjustment from 3-150 mm Activation of the calibrating roller via the terminal with patented CSD segmented pressure bar for compensation of workpiece tolerances up to 2 mm Sanding width 1100 mm Sanding belt length 2150 mm Sanding belt speed, frequency-controlled, approx. 2-18 m/sec Drive, sanding unit: 15 kW Feed rate: 5/10 m/min Compressed air: 6 bar Compressed air requirement: 15 NL/min with belt extraction: 490 l/min Extraction nozzle: 180 mm Air requirement, sanding unit: 1800 m³/h Required air velocity: 20 m/sec Total power connection: approx. 17 kW Weight: approx. 2000 kg Dimensions (W x D x H): 1840x1670x2200 mm The machine will be fitted with a new feed belt. Availability: short-term Location: Röllbach

Condition: used, Used machine Long belt sander Motor power: 4 PS / 3 kW Engine speed 2890 rpm Table dimensions approx. 2460 mm x 900 mm Manual table height adjustment Njdpfjwka I Aex Alcolc Transport dimensions approx. 3600 x 1600 x 1450 mm Weight approx. 500 kg Availability: at short notice Location: Röllbach

Condition: used, Year of construction: 1983, Used machine Year of manufacture: 1983 Nsdewka T Sjpfx Alcjlc Condition: fully checked and serviced, including new feed belt Equipment and technical data: - Including combination unit with contact roller and sanding pad - With height-adjustable contact roller for calibration - With air-cushion pressure pad controlled by the workpiece - 4-way adjustable grit compensation - With pneumatic belt tensioning device - With rotating cleaning brush on the outfeed side of the machine - Belt oscillation via photoelectric sensor for automatic monitoring and regulation of lateral belt alignment, ensuring uniform belt wear - With roller table at the infeed - With digital display unit for the motorized workpiece thickness setting - With additional veneer sanding pad - Including 2x spare sanding pads - Sanding width: 1350 mm - Sanding belt length: 1900 mm - Workpiece height: 150 mm - Main motor: 15 kW - Infinitely variable feed speed: 2.5 - 12.5 m/min - Extraction ports: 2 x 200 mm Dimensions: approx. 2300 x 2000 x 2300 mm Weight: approx. 2300 kg Availability: short-term Location: 63934 Röllbach

Condition: used, Year of construction: 1976, Used machine Year of manufacture: 1976 Equipment and technical data: - Underside sanding - Material feed via rubber rollers - Non-contact oscillation control - Quick-change pressure beam - Electromotive adjustment of the tool thickness with an easily readable digital display - Push-button control with contactor Nlsdpfewpm I Tjx Alcoc - Sanding width: 1350 mm - Maximum workpiece thickness: 150 mm - Sanding belt width: 1360 mm - Sanding belt length: 1900 mm - Feed rollers switchable: 10 + 20 m/min - Compressed air connection: 6 bar - Air requirement: approx. 180 NL/min - Motor power: 17.5 kW - Dimensions (W x D x H): 1800 x 1100 x 1520 mm - Weight: 2600 kg Availability: short notice Storage location: 63934 Röllbach

Condition: used, Year of construction: 1984, Used machine Year of manufacture: 1984 Condition: fully checked and serviced Equipment and technical data: Nlsdpfsw R Hh Uex Alcjc - Incl. combination unit with contact roller and sanding pad - With height-adjustable contact roller for calibration - With air cushion pressure shoe controlled by the workpiece - 4-way adjustable grit compensation - With pneumatic belt tensioning device - With rotating structuring brush at the machine's outfeed side - Sanding width: 1350 mm - Sanding belt length: 1900 mm - Pass-through height: 150 mm - Main motor: 15 kW - Feed speed steplessly adjustable 2.5 - 12.5 m/min - With roller table at the infeed - With separate additional structuring brush - With roller table at the outfeed - With digital display unit for the electromotoric workpiece thickness setting - With automatic workpiece thickness adjustment - Extraction ports: 2 x 200 mm - Feed belt is ok; has a defect in one spot (see photo) Dimensions: approx. 2300 x 2000 x 2300 mm Weight approx.: 2500 kg Pictures show the machine in unchecked condition! Availability: short-term Location: Röllbach

Condition: used, Used machine Condition: consistent with age Table size: 2600 x 900 mm Max. usable grinding length: 2700 mm Belt length: 7800 mm x 150 mm Nlsdpjxwz N Sefx Alcoc 1100 mm throat on the right Motor: 5.2/7.5 kW with belt air blast nozzle Shipping dimensions: 4300x1650x1800 mm Weight: 1300 kg Availability: short term Location: Röllbach