Used Threaded Drill for sale (6,533)

Condition: used, Year of construction: 2008, operating hours: 5,834 h, 2008 | Delmag SR 25 BT / RH 18 on Sennebogen SR25 with ABI MDBA 3500 Soil Improvement Rig | Used Drill | 5834 hours 📍Location: Germany, Uelzen 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 220000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 65 inspection points 65 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The machine is used for concrete pile drilling, soil improvement, and vibration tamping. The carrier vehicle is a Sennebogen SR25BT (built in 2008) with a Delmag RH18 drilling attachment (built in 2009). The drill table lift is 12.50m, total height is 19.91m. The outreach is 3.165 - 4.00m. It includes a winch for the feed with freewheel, auxiliary winch, and rear platform. The drill table is an SHT25, and the KDK rotary drilling head BT180-2 is not included. The machine is purely a soil improvement device, equipped with a MBDA 3500 ABI drill gearbox. It has a single auger. No Kelly bar is included. It features mast support cylinders and alignment automation. The hydraulic telescopic undercarriage has a width that adjusts from 3.0m to 4.40m. The CAT C9 engine was overhauled by CAT in 2015 at 3,304 operating hours. Drills and drill accessories are available separately. Also available is a mobile mixing plant, manufactured by MAT, which includes a mixing container (throughput capacity of 20m3/h), a conveyor screw, a mixing container (capacity 4,000l), and a plunger pump with remote control. The machine’s condition corresponds to its operating hours. During the inspection in 2023, the machine was running and functioning without any issues. As of October 2024, wear and tear have occurred on the valves, controls, and hydraulic hoses. It is not possible to operate the machine with two attachments simultaneously. The machine shows wear on bolts, bushings, and general usage marks (dents, scratches, etc.) consistent with its age, operating hours, and usage. The machine was not tested under load. It has been used with 55 and 80 paddles. After service and maintenance of the wear and tear, the machine will be ready for operation. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "33244 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? Dwjdpfx Ahoxppwne Uod We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: new, CATALOG NUMBER M0252 PRODUCT FEATURES Main features of the machine: - Single-head drilling machine for drilling at an angle range of 0 - 90° - Head tilt angle adjustable pneumatically - Side stops adjustable with an accuracy of up to 0.1 mm - Securing clamps allow quick panel positioning without adjustment - Spindles adapted for quick couplings - Patented pneumatic material clamps - Work table made of MDF - Fast and precise adjustments - Accurate drilling - Italian-made Standard machine equipment: - 2 aluminum rulers, 1.5 m long (right and left), each with four stops - 5 quick couplings - Wooden crate for safe transport of the machine ADVANTAGES - Drilling vertically/horizontally/at an angle - Multiple spindles - New machine - CE certificate - Robust - Professional TECHNICAL DATA - Number of spindles: 23 - Distance between the first and last drill bit: 704 mm - Distance between centers of adjacent spindles: 32 mm - Max. size of workpiece: 950 x 3000 mm - Max. workpiece thickness: 60 mm - Max. drilling depth: 65 mm - Number of pneumatic clamps: 2 Dwjdpfodf S Rzex Ah Ujd - Working pressure: 6-7 bar - Air consumption: 10 l/cycle - Motor power: 1.5 kW - Noise level: 76.1 dB - Spindle speed: 2800 rpm - Overall dimensions: 1235/950/1310 mm - Weight: 310 kg Net price: 19,500 PLN Net price: 4,650 EUR Net price calculated at an exchange rate of 4.15 PLN/EUR (price may change if the exchange rate fluctuates significantly)

Condition: used, Year of construction: 1997, functionality: fully functional, throat depth: 360 mm, spindle speed (max.): 1,270 rpm, spindle speed (min.): 68 rpm, drilling capacity: 45 mm, drilling depth: 240 mm, table width: 550 mm, table length: 550 mm, overall weight: 675 kg, Morse taper: 4 Drilling capacity: Ø45 mm. (st. 60 kg./mm2). Quill travel: 240 mm. Throat/reach: 360 mm. RPM.: 68-1270. Table size: 555 x 550 mm. Automatic feed: Yes. Motor: 2,2 kW. Year: 2001 Country of origin: Spain. Size (L x W x H): 650 x 1100 x 2400 mm. Djdpoxtpwijfx Ah Ujwd Weight: 675 kg. Steel gearbox with hardened and grounded gearwheels. With auomatic feed, coolant pump in base and tilting and turning table. All our machines are tested and serviced before delivery.

Condition: used, Year of construction: 2024, AMAZONE Cirrus 6003-2 Trailed seed drill combination Year of manufacture 2023, demo machine in use Approx. 170 hectares of mileage Equipment: Single-chamber hopper with 3600 liters Quick hopper emptying LED lighting Chassis swing Short telescopic drawbar with CAT 3 drawbar Dual-circuit air brake Tire packer with 12 Matrix tires 48 mounted discs, 460 mm finely serrated Stone remover Tramline segment Track width 1.80 m Electric half-width control 36 TwinTec plus coulters Control plus 65 depth control rollers Electronic coulter pressure remote adjustment Harrow set 6000/166 Comfort hydraulics ISOBUS operation Radar sensor AutoPoint Dodpfx Ahsv Aquro Uowd Amatron4 Comfort package for Twin Terminal Bout marker Tramline marking Dispensing roller 660 cm Ridge clearer Scraper LED work lighting Blower drive with 6.2 cc hydraulic motor | Internal No.: 11165512

Condition: excellent (used), functionality: fully functional, RADIAL DRILL Dwedpfexf Hucsx Ah Uod BREDA 1250 x 55 MODEL R55 USED MACHINE INTERNAL CODE: SVR 319

Condition: good (used), Reamer, twist drill, drill -Twist drills: different sizes on request -different manufacturers -Price: Ø 10 - 30 mm 0.50 EUR/mm (drill Ø 20 mm = 10 EUR net) -Price: Ø 31 - 45 mm 1 EUR/mm (drill Ø 35 mm = 35 EUR net) -Price: Ø 46 - 80 mm 1.60 EUR/mm (drill Ø 50 mm = 80 EUR net) Dwedpfx Asv H D N Rsh Ued -Two-cutter -Diameter: 10-80mm -different lengths -Recordings: MK1 - MK6 -Type: HSS

Condition: used, Drills from 29 mm Drills up to 50 mm Reamers up to 39.6 mm Djdpfx Aexpqv Seh Ujwd

Condition: excellent (used), CATALOG NUMBER 6608 TECHNICAL DATA - Number of spindles: 21 pcs - Distance between outermost spindles: 640 mm - Spindle pitch: 32 mm - Max drilling depth: 60 mm Dodpeh I N Sqofx Ah Uowd - Vertical drilling width: 60 mm - Adjustable drilling (up/down and at an angle) - Right/left drill bits, mounted with hex screws - Pneumatic clamps: 2 pcs - Table surface dimensions: 490x1040 mm - Height to table surface: 920 mm - Main motor: 2.2 kW - Operating pressure: 6-8 bar - Dimensions (L/W/H): 2830/1150/1320 mm - Weight: 442 kg - German manufacture - Original DTR documentation - Unpainted - Mobile Net price: 7,900 PLN Net price: 1,880 EUR (based on a rate of 4.2 EUR) (Prices may vary in case of significant fluctuations)

Condition: used, Year of construction: 2001, functionality: fully functional, throat depth: 360 mm, spindle speed (max.): 1,270 rpm, spindle speed (min.): 68 rpm, drilling capacity: 40 mm, drilling depth: 240 mm, table width: 550 mm, table length: 550 mm, overall weight: 675 kg, Morse taper: 4 Drilling capacity: Ø40 mm. (st. 60 kg./mm2). Quill travel: 240 mm. Throat/reach: 360 mm. RPM.: 68-1270. Table size: 555 x 550 mm. Automatic feed: Ja Motor: 1,5 kW. Year: 2001 Country of origin: Spain. Size (L x W x H): 650 x 1100 x 2400 mm. Weight: 675 kg. Steel gearbox with hardened and grounded gearwheels With electro magnetic clutch for feed, coolant pump in base and tilting and turning table. Dsdpfx Aextpqpeh Uswd All our machines are tested and serviced before delivery.

Condition: good (used), Spiral Drill Bit Grinding Machine DAREX SP 2500 Dwjdpfxswqzy Ts Ah Usd - Grinding diameter: 1.5–26 mm - 3x tool holders - 1x spare grinding wheel - Machine base - Documentation Dimensions: LxWxH: 0.5x0.5x1.6 meters / Weight: 80 kg Subject to errors and input mistakes

Condition: ready for operation (used), Alzmetall AB3ESV Pillar Drill Tool Holder: MT 3 Drilling capacity in steel (Ø): approx. 30 mm Throat (spindle to column/table): approx. 290 mm. Quill stroke (spindle stroke): about 160 mm. Speed range: e.g. 55 – 1,450 rpm (steplessly adjustable) as specified. Alternative specification: speed range up to approx. 1,850 rpm. You are welcome to arrange a viewing appointment. Dwedpoxufknefx Ah Ujd We can also organize cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued, provided you have a valid VAT ID number. Subject to prior sale. Visit our shop and check out our other offers as well. All company names and trademarks mentioned are the property of their respective owners and are used strictly for identification and description of the products. Deviations from technical data and errors in the item description may occur and are reserved.

Condition: good (used), Bench drill, pillar drill, column drill, column drill -Manufacturer: WMW Heckert, bench drilling machine type BT 2 Dwsdpfx Asxm Rzioh Ued -Clamping table: 340 x 280 mm -Travel: 350 mm -Spindle holder: MK2 -Projection: 215 mm -Speeds: 355/710/1400/2800 rpm -Column: diameter 93 mm -Spindle stroke: 100 mm / depth stop with fine adjustment -Motor: VEM 0.8/1.0 kW with brake -Voltage: 380 V -Number: 2x drill available -Price: per piece -Dimensions: 550/480/H1270 mm -Weight:157 kg/piece

Condition: excellent (used), HOLYTEK YOM-110 oscillating drilling machine Dwjdpfju Efhcsx Ah Uod Oscillation width max 110mm Maximum depth of hole 50mm Spindles rotation speed 9500r.p.m Table tiltable up to 20° Tools mounted with clamping cage CE certificate

Condition: excellent (used), Year of construction: 1993, Catalogue number 7718 TECHNICAL DATA - Number of spindles: 23 pcs - Head prepared for screw-in drills - Distance between outermost spindles: 704 mm - Distance between spindles: 32 mm - Pneumatic clamps: 2 pcs - Table surface dimensions: 1200x850 mm - Height to table surface: 930 mm - Feed cylinder stroke: 70 mm - Max drilling diameter: 12 mm - Drilling adjustment vertical/horizontal and at an angle - Drilling unit adjustment pneumatic - Main motor: 2×0.75 kW - Dimensions L/W/H: 1270x1330x1350 mm - Weight: approx. 700 kg ADVANTAGES – Made in Poland – 23 spindles – Head prepared for screw-in drills – Not repainted Dsdsw I R Tiepfx Ah Ujwd – DTR technical documentation – Used drilling machine, very good condition Net price: 8900 PLN Net price: 2120 EUR based on exchange rate of 4.2 EUR (Prices may change depending on currency fluctuations)

Condition: used, Year of construction: 1987, Work table 750mm x 1200mm Arm travel 800mm Tool holder MK 3 Dwodpfx Ahoxpfhve Ued Drilling capacity 28mm in steel Thread cutting device Coolant system Documentation

Condition: good (used), A used high-speed radial drilling machine Fab.DONAU Type: DR 32 with vice. The machine operates in all directions. The clamping to the right and left is weak. Therefore, we are selling the machine at a favorable price. Dedpewn Ex Ujfx Ah Ujwd

Condition: used, Year of construction: 1988, Manufacturer: Haacke Dwodpfeg Tvmbex Ah Usd type: UW II A-CNC year of construction: 1988

 only for step drills up to max. Ø 30mm cross adjustment: 250mm height adjustment: 250mm grinding length: 400mm weight: 1,4t footprint: 2,5 x 1,2 x 1,9mm Application: for grinding steps on step drills Accessories:

 Paper belt filter make LKK Foreground flap collet chuck Forkardt Overz /BR 50/ LH-Z 24394

Condition: good (used), Bench drill, pillar drill, column drill, column drill Dwodpfx Ahjir E Sne Usd -Manufacturer: WMW Heckert, bench drilling machine type BT 12/1 with base frame -Clamping table: 340 x 280 mm -Travel: 370 mm -Spindle holder: MK2 -Projection: 215 mm -Speeds: 224/450/900/1800 rpm -Column: diameter 92 mm -Spindle stroke: 100 mm / depth stop with fine adjustment -Motor: VEB 0.4/0.7 kW with brake -Voltage: 380 V -Dimensions: 620/480/H1710 mm -Total weight: approx. 182 kg

Condition: ready for operation (used), Voortman VB1250 lintzaag kap: 1250 x 500 mm versteksnede +/- 60°: 1000 x 500 mm versteksnede +/- 45°: 850 x 500 mm versteksnede -30°: 500 x 500 mm zaagsnelheid: 40 120 m/min vermogen: 7,5 kW Afmetingen lintzaag: 11.000 x 54 x 1,6 mm Voortman V630 drievoudige boorunit 2 horizontale boorunits 1 verticale booreenheid elke unit heeft een automatische gereedschapswisselaar met 5 posities spindel: SK40 (koeling via spindel) boordiameter: 8/40 mm boorsnelheid: 0 2000 tpm draadtappen: M8/M24 profielhoogtemeting inbegrepen middelpuntmarkering inbegrepen nummermarkeringseenheid inbegrepen 18 meter invoerrollenbanen 6 dwarstransportbanden van 4 meter lengte maximale breedte: 1050 mm cap: 400 kg/m max positioneringsgewicht: 9 ton Roltransportmeetsysteem = onbeperkte meetlengte Vacon 110 CNC-besturing Hydraulisch aggregaat 4kW - 160 bar Dwedpfxjwlkwwj Ah Uod

Condition: excellent (used), Used drill sharpener by Hasberg, model FSS. The device is designed for sharpening drills and milling cutters. It features adjustable sharpening angle and a dust extractor. Sold together with the visible accessories. Dwsdpfsxuk Skjx Ah Ujd

Condition: used, Year of construction: 1991, Work table 600mm x 1200mm Column travel 600mm Tool holder MK 3 Drilling capacity 28mm in steel Tapping device Djdpfx Aexpfglsh Uswd Coolant system Documentation

Condition: good (used), Year of construction: 1993, machine/vehicle number: 1117-C, Offer 25330 Technical data: - Drilling capacity in steel ST 60: 50 mm - Drilling ability in steel ST 60: 55 mm - Drill spindle taper: MK 4 - Drill spindle stroke: 230 mm - 9 spindle speeds: 54 - 1032 rpm - 4 feeds: 0.1 - 0.4 mm/rev - Throat depth: 370 mm - Max. distance table – drill spindle: 650 mm - Max. distance machined base plate – drill spindle: 1140 mm - Table with 2 T-slots: 650 x 550 mm - Table height adjustment via rack and pinion with handwheel - Table tiltable to left and right Dedpfx Aoxr A Sqsh Uewd - Drive: 400 V / 3.0 kW - Space requirement approx.: W 700 x H 2400 x D 1000 mm - Weight approx.: 700 kg - Including: reversible operation (right/left), lighting

Condition: good (used), Code: 0227 Brand: VALEX Model: TR 32 - CE Standard Pillar drill for wood, metals, aluminum, and various materials - CE Standard Technical data: Single-phase motor V. 220 - Power 1500 watt N° 12 speeds Max distance between spindle and base 1050 mm Spindle-column center distance 260 mm Spindle 20 mm Work surface 475 x 425 mm Work surface material cast iron Table inclination 0-45° Dwjdpfx Ahsxnnimj Ujd Column diameter 92 mm Overall dimensions mm 480 x 800 x 1700 h Weight kg 144

Condition: new, FACTORY-NEW T-TYPE FLOOR TYPE MILLING MACHINE HEIDENHAIN TNC 640 digital contouring control HEIDENHAIN package (motors, measuring systems, and handwheel) X-axis travel: 4,000 mm Z-axis travel: 1,500 mm Y-axis (cross-ram): 1,300 mm V-axis (cross column): 1,000 mm Rotary table (C-axis): 2,000 x 2,000 mm Max. load capacity up to 15,000 kg Automatic universal swiveling head 1° x 1° (optionally with fixed ram Ø 210mm) Spindle taper: SK50 DIN 69871/A Spindle speed: 6,000 rpm (oil-cooled) Max. spindle motor power: 53 kW ICS - internal coolant supply - 36 bar Dsdoq I Nkbepfx Ah Uswd Rapid traverse X, Y, V, Z: 30 m/min Positioning accuracy: 0.020 mm Repeatability: 0.010 mm Tool changer: 60-position chain magazine (vertical / horizontal change) Double hinged belt chip conveyor (longitudinal) Perimetric guarding (open at top) Only inquiries from Germany will be processed.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine design • Work table 1800 x 600 mm with 4T-slots • Boom travel 1050 mm • Drill spindle SK 40 with tool clamping device • Stepless speed programming • Stepless spindle feed via three-phase servo motor • 2 T-slots 18 mm on the machine base frame at the back • 2 T-slots 18 mm on the machine base frame on the left • Thread cutting device • Central lubrication • Coolant device • Machine light • CE marking • Safety device • USB interface Dimensions and travel paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Spindle stroke (Z axis) mm 200 Column stroke (W axis) mm 410 Distance from lower edge of spindle - min mm 70 Top edge of table max. mm 680 Distance from bottom edge of spindle - min mm 970 Floor max. mm 1580 Dwodpfxjxn A Spo Ah Ujd Drilling radius mm 540 - 1590 Work table height mm 900 Cutting values Drilling performance into solid material St 60  40 GG 22  50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 – 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min. 3 Feeds continuously variable mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen backlit, easy to read from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental dimensions, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Sub-program technology: yes Machining cycles Standard software options: programming in dialog, 38 zero point shifts, turning and mirroring, teach-in for X, Y, Z, restart in the program with optional functions for targeted entry Zero point determination: cycles for determining zero points by manually probing the workpiece for: - any rectangular parts clamped - any round parts clamped - transfer of cast and burnt parts - angular position detection for round parts by probing reference edges or surfaces Test graphics Graphic display of drilling patterns Data interfaces USB