Used Trumpf Tool Set for sale (376)

Condition: ready for operation (used), Year of construction: 2005, operating hours: 15,202 h, laser power: 2,700 W, travel distance X-axis: 2,500 mm, number of axes: 3, This 3-axis TRUMPF TRUMATIC L 2530 Plus was manufactured in 2005 and will come with a Storemaster. It features a powerful 2700 W laser and includes advanced equipment such as a laser cutting head with 3.75" and 7.5" lenses, automatic sheet edge detection, and programmable cutting gas selection. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TRUMATIC L 2530 Plus CO2 laser cutting machine we have for sale. Contact us for further details. Hfjdpfez R Aa Rsx An Ejp - Mains Supply: 400 V / 50 Hz- Connected Load: 63 kVA- Control Voltage: 24 V =- Required Fuse Protection: 3x 100 A- Compressed Air Connection: 7-10 bar- Nitrogen Connection (N2): 30 bar- Oxygen Connection (O2): 16 bar- Standard Equipment: Hi-Las high-pressure cutting, Laser cutting head with 3.75" lens, Laser cutting head with 7.5" lens, Cutting head quick-change device, Automatic sheet outer edge detection, Positioning laser diode, Programmable cutting gas selection/pressure setting, Microweld, SprintLas, Capacitive height control (DIAS III), ContourLas, AutoLas Plus, Oil spray device, Automatic pallet changer, Working area lighting, Slag/small parts chute, Multi-chamber dust extraction, Compact dust extractor, Automatic shut-off, Safety devices, ToPs 100 lite, Tele-diagnosis device, RJ45 network connection- Special Equipment & Accessories: 3.5" floppy disk drive, Detailed operating manual, Automatic pallet changer with safety light barrier, AutoLas Plus, Clamping jaws for Pallet A+B (4 pcs each), Additional 3.75" laser cutting head, Loading device (overhauled in workshop 2017), Programming software TRUMPF TruTops Laser, Gas fittings, Teleservice via Internet- Chiller Unit (Riedel L15/21-TR3.23, YOM: 10/2004): 400 V / 50 Hz, 42 A, IP54, Refrigerant R134a (11.5 kg), Max working pressure 20.2 barStoremaster:- Drawer Usable Area: 2,500 x 1,250 mm- Max Load per Drawer (evenly distributed): 3,000 kg- Max Load per Top Level (evenly distributed): 3,000 kg- Max Load per Rack Block (evenly distributed): 60,000 kg- Max Load at Crane Hook: 325 kg- Max Load under Vacuum Lifter (evenly distributed): 180 kg- Special Equipment: SCHMALZ vacuum lifter- Dimensions (from technical drawing): Height ca. 3,500 mm / 4,170 mm (modified/adjusted height ca. 3,500 mm), Width ca. 3,600 mm - 5,900 mm depending on layout/extension, Depth ca. 2,700 mm - 4,700 mm- Upper Grid Floors Capacity: 7,500 kg surface load each

Year of construction: 2003, condition: used, X-axis: 3000mm, Y-axis: 1500mm, Z-axis: 115mm, laser power: 5000W, max. mild steel sheet thickness: 25mm, max. stainless steel sheet thickness: 20mm, max. aluminium sheet thickness: 12mm, max. workpiece weight: 900kg, max. axis-parallel speed: 200m/min, max. simultaneous movement speed: 300m/min, smallest programmable positioning increment: 0.01mm, positioning deviation: ±0.1mm, mean positioning variation: ±0.03mm, CO₂ consumption: 1l/h, N₂ consumption: 51l/h, He consumption: 13l/h, connected load: 105kVA, length: 11,100mm, width: 4600mm, height: 2400mm, weight: 12.5t, NC operating hours: 55,748h, laser operating hours: 55,567h, beam-on hours: 18,613h. On-site inspection is possible. Hfjdps Akd Rujfx An Eop

Condition: excellent (used), Year of construction: 2012, Technical Data: Working length: 4100 mm Distance between uprights: 3550 mm Press force: 300 tons CNC control: DELEM EPC-3D Controlled axes: Y1/Y2; X; R; Z1/Z2 Hydraulic tool clamping top and bottom: WILA system CNC crowning Stroke: 550 mm Throat depth: 405 mm Installation height: 620 mm 2 bending aids Angle measuring system Hjdpfx Ajxdt Umjn Esfp Motor power: 30 kW Laser monitoring Table height: 980 mm Dimensions (L x W x H): approx. 5550 x 2950 x 3400 mm Weight: approx. 24.5 tons Accessories: Manual tool changer Segmented bending with step-by-step support of the bending aids (segment bending) 1 set of tools Condition: Very good condition The seller assumes no liability for typing or data transmission errors. The machine’s appearance, technical condition, and wear are consistent with its age; used machines are sold without any warranty.

Condition: used, functionality: fully functional, Year of construction: 2007, machine/vehicle number: A0100A0637, laser type: CO₂ laser, laser source manufacturer: trumpf, laser power: 2,000 W, input voltage: 24 V, input current: 100 A, input frequency: 4,000 Hz, type of input current: three-phase, type of cooling: water, year of last overhaul: 2025, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Trumpf Trumatic 6000, manufactured in 2007 – still in use and fully operational (used for stainless steel sheets, 0.8 – 2 mm thick). Hedpfx Aez Iwvgon Ejfp

Condition: defective spare-parts repository (used), Year of construction: 2009, For sale is a defective Trumpf 7036 tube bending machine, manufactured in 2009. The screen remains blue (blue screen error). Hsdpfx Aoz Rknpsn Eefp

Condition: good (used), functionality: fully functional, Year of construction: 2007, TRUMPF TruMatic 7000 – 1300 Year of manufacture: 2007 Includes active dies! Includes Sheetmaster and Gripmaster Machine operating hours: 38,797 h Beam on-time: 38,149 h Laser power: approx. 4000 Watts Max. punching force: 220 kN Hjdpfsz Dumzox An Ejfp Working area (laser operation): approx. 2540 x 1280 mm Working area: punching area: approx. 2540 x 1370 mm Control system: Bosch MTX compact Max. sheet thickness: approx. 8 mm Space requirement: approx. 7950 x 6700 mm Machine weight: approx. 23,000 kg Total connected load: 87 kVA

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, punching force: 18 t, working range: 30,001,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,600 mm, Very well maintained and fully serviced used Large format Trumpf 3000 cnc punch press for sale Manufacturer TRUMPF Type TruPunch 3000 (S11) Year 11/2012 Working area 3000 x 1500 mm - without reposition Working range on cross-side (X-axes) 3000 mm Hfsdexrnggepfx An Ejp Working range along (Y-axes) 1600 mm Large throat 1600 Complete with multi tool capability Type S11 Video available upon request

Condition: excellent (used), Year of construction: 2000, Used Trumpf Trumatic 200r CNC punch press for sale: Brand: TRUMPF Model: TRUMATIC 200 Year: 2000 Type: CNC Punching Machine Control:Bosch CC 220 Punching force (ton) 16.5 Movement X-axis (mm) 80 m/min Movement Y-axis (mm) 55 m/min Simultaneous positioning speed (X+Y m/min) 97 m/min Max. sheet thickness (mm) 6.4 Tool changing time (sec.) 1.5-6.5 s Number of tool places 15 Max. hole diameter (mm) 76.2Max. workpiece weight (kg) 150 Hsdpfxevq N Nds An Ejfp Max. stroke rate (1/min) 420 Picture of punch samples: 6mm aluminium

Condition: ready for operation (used), TRUMPF 150 MQ VIS focusing optics SN:1277242-00769 + SN:1277243-00865, used, normal signs of use, 100% functional, scope of delivery as per photos. Hjdpsz Adbzsfx An Ejfp

Condition: good (used), functionality: fully functional, Year of construction: 1999, laser power: 2,400 W, sheet thickness (max.): 8 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 4 mm, travel distance X-axis: 3,085 mm, travel distance Y-axis: 1,740 mm, overall weight: 23,000 kg, total length: 9,100 mm, total width: 7,900 mm, total height: 2,400 mm, Equipment: CE marking, documentation/manual, emergency stop, safety light barrier, The machine is in good condition. Hsdpfeymrn Eox An Esfp

Condition: ready for operation (used), TRUMPF 200 MQ VIS focusing optic + Haas - Laser NBB 22-30-20-00 SN:9061842, used, normal signs of wear, 100% functional, delivery scope as shown in the photos. Hedpfx Asz Adb Usn Eefp

Condition: ready for operation (used), Year of construction: 1998, overall weight: 8,600 kg, This 6-axis TRUMPF TrumaBend V85S press brake was manufactured in 1998. It features a bending length of 2,550 mm, an 850 kN bending force, and a 6-axis back gauge. The Delem 65 CNC control enhances precision, while the electro-hydraulic twin cylinder drive ensures robust performance. If you are looking to get high-quality bending capabilities, consider the TRUMPF TrumaBend V85S machine we have for sale. Contact us for more information about this machine. Additional equipment • Extended Installation Height and Stroke: Additional 150 mm each • 2nd Foot Switch Machine Benefits Technical Machine Benefits • Drive type: electro-hydraulic twin cylinder with independent y1/y2 movement • Power requirements: 11 kw / 415 v / 50 hz • Design: down-stroking with dual cylinder electro-hydraulic ram drive via proportional valves • Inclination of beam (y1/y2): +10 mm • Bending force: 850 kn // gap between columns: 2260 mm // throat depth: 410 mm // stroke length: 215 mm // open height: 385 mm • Bed width: 120 mm • Ram measurement: incremental with deflection compensation • Tool holders: self-centering top tool holder, hardened bottom tool holder • Hydraulic tool clamping: hydraulic clamping for both top and bottom tools • Safety features: safety screens, light barriers, single/double break modes // front support brackets: two quick-adjustable brackets Hfedpfx Anozuxkhe Eop Extra Information Back Gauge: CNC-controlled ‘X’ and ‘R’ axis back gauge with safe 2-finger adjustment X-axis Back Gauge Travel: 600 mm Maximum X Distance: 860 mm R-axis Vertical Travel: 250 mm Back Gauge Travel Speed: 500 mm/sec R-axis Speed: 300 mm/sec Z1/Z2 Axis: CNC-controlled, asymmetric finger adjustment Working Speeds: Approach Speed: 200 mm/sec Operation Speed: 1–10 mm/sec Return Speed: 135 mm/sec Technical Specification Bending Length 2550 mm

Year of construction: 2015, condition: used, Welding System Manufacturer: TRUMPF Type: TruHeat HF 5010 Year of manufacture: 2015 Technical details: Input power: 12.5 kVA Power factor: 0.95 Rated power: 10 kW Output current: 560 A (RMS) Output voltage: 1500 V (RMS) Additional information: Hfedpezq Hknefx An Esp In our assessment, the machine is in mint condition and can be inspected under power by appointment. - incl. various accessories Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: used, Year of construction: 1997, pressure 130 t chamfer lenght 3060 mm distance between columns 2690 mm column arm 410 mm stroke 365 mm dayligth 535 mm ajustment speed 200 mm/sec working feed 1.0 - 10.0 mm/sec return speed 135 mm/sec table width 120 mm table height 1050 mm tiltable up to +/- 10.0 mm Number of working hours ca. 31.800 h compressed air 5.0 - 7.0 bar oil volume 250 l operating pressure 340 bar voltage 400 V total power requirement 23.0 KVA weight of the machine ca. 12950 kg range L-W-H 3660 x 2310 x 2900 mm Machine in a well-maintained condition (!!) with only approx. 31.800 operating hours - in checked condition - machine video - ?v=PBV-MDtZnlE Equipment: - CNC electro-hydraulic press brake - DELEM CNC control model DA 65 * swiveling control panel, front left * 2D graphic programming & product display * Tool & program library * USB keyboard and mouse interface - CNC controlled axes: Y1 + Y2 / X1 + X2 / R1 + R2 / Z1 + Z2 / I axis - CNC controlled back stop (X1 + X2 axis) Hedpfx Ajxacfmsn Esfp - CNC controlled height adjustment of the back stop (R1 + R2 axis) - CNC controlled adjustment of the stop fingers (Z1 + Z2 axis) - CNC controlled, pneumatic die displacement (I axis) - CNC WILA electro-motoric table crowning - TRUMPF hydraulic upper tool clamping - TRUMPF manuel Lower tool clamp - 1x freely movable 2-hand / foot control - Safety device at the rear (sliding door) - Safety device at the side (swinging door) - Original operating instructions + spare parts list

Year of construction: 2021, condition: used, An automated robotic welding cell including a Fronius TPS 320i welding power source, robot arm, welding table and protective enclosure is offered for sale. Inspection possible by arrangement. Hfedpfj Aih D Iex An Eep

Condition: excellent (used), functionality: fully functional, Year of construction: 2002, operating hours: 29,966 h, machine/vehicle number: B0104A0167, stroke length: 215 mm, overall weight: 11,250 kg, pressing force: 130 t, 6 controlled axes Hfedpfx Anjzy Ryxe Esp Includes new tools worth €12,000!!! Everything is fully functional.

Condition: used, Year of construction: 2018, controller model: , _____ Description: Year of manuf. : 2018 Control : Technical data Year of manufacture:2018 Pressing force approx.:3200 kN Folding length approx.:4420 mm Control system:TASC 6000 Projection:420 mm Free upright clearance approx.:3680 mm Usable installation height approx.:615 mm Machine weight approx.:23400 kg Equipment :- Sturdy machine frame :- Press beam, stress relieved with high bending strength :- Spherical bearing of the press beam (inclined position) :- Electro-hydraulic top drive with 4-cylinder technology :- Optical set-up and positioning aid :- Generous edge clearance :- Flat front covers :- Block hydraulics :- Electronic pressure compensator :- Measuring system with glass scale and deflection compensation :- Hydraulic oil in the machine (lifetime lubrication) :- Oil cooler :- Control cabinet cooling via air-to-air heat exchanger :- Modern machine design Hjdpsyy Hgqofx An Eofp Extended equipment :- 6-axis backgauge system :- Hydraulic upper tool clamping :- CNC crowning :- Work area lighting front and rear BendMaster (150) :- Sturdy base body and manipulator in cast aluminium construction :- Load capacity 150 kg, plate plus gripper :- Low floor track in welded construction :- Sheet sensor for contour detection :- Rotary feed-through for easy gripper change :- Gripper coupling on BendMaster :- Sensors for 4-axis backgauge system :- Electric drives :- Double sheet detection :- Regripping station NC :- Vacuum generation for suction gripper :- Platform (300 mm) for the bending press Extended BendMaster equipment :Extended BendMaster equipment - Track extension to 12 m :- Sensor system for 6-axis back gauge :- Gripper changing console :- Vacuum gripper, undefined :- Modular vacuum gripper with separation (material for 3 grippers) :- Gripper coupling :- Tong gripper :- Sheet removal station with linear axis :- Side door on right for safety fence

Condition: excellent (used), functionality: fully functional, Year of construction: 1996, Used very clean, well maintained Trumpf V 85S series hydraulic down stroke cnc pressbrake with a large amount of tooling for sale Trumpf v85s 2.5 metre x 85ton – 4axis cnc pressbrake in good condition Make: Trumpf Hodjr Hcl Ajpfx An Esfp Model: Trumabend v85s Year: 1996 Max. pressing force: 850 kn / 85ton Max. stroke: 215mm Brake time: 86ms Total axis: 2axis back gauge / total axis 4 – y1 y2 x r and i axis Large amount of upper and lower Trumpf tooling, some tooling is brand new Complete with: • 2 axis back gauge • i axis – bottom base moves to use twin multi v without operator moving or changing the tooling • Fully serviced / Good condition

Condition: repair required (used), functionality: not functional, Year of construction: 2007, operating hours: 134,409 h, machine/vehicle number: A0270A0124, control type: CNC control, laser type: CO₂ laser, laser source manufacturer: Siemens, laser hours: 51,652 h, laser power: 6,000 W, sheet thickness (max.): 25 mm, year of last overhaul: 2023, Equipment: documentation/manual, TRUMPF TRULASER 5060 CO₂ Laser Cutting Machine – 6000 W TRUMPF TRULASER 5060 – 6000W CO₂ Laser – Year 2007 – To be recommissioned Brand: TRUMPF Model: TRULASER 5060 (CO₂ Laser) Laser power: 6000 W CNC control: Siemens Serial number: A0270A0124 Hfjdpfx Ansztb Els Esp Year of manufacture: 2007 Technical specifications • Beam operating hours / cutting time: 134,409 h • Laser operating hours under power: 51,652 h • Maximum steel thickness: 25 mm • Dimensions: 10,300 x 3,820 x 2,550 mm • Weight: 16,500 kg Standard equipment: - TruFlow 6000 W resonator - HI-LAS high-pressure cutting - Cutting heads with 7.5’ and 10’ lenses - Quick-change cutting head device - Automatic sheet edge detection - Capacitive profile follower and APC process control - Positioning laser diode - Programmable cutting gas pressure - Programmable power cycle - Oil vaporization device - PCS (Process Control System) - Plasma line and LLS (laser power control) - Sprint Line - Contourline - Modem and remote diagnostics - Focus Line - Laser logbook - Automatic pallet changer - Work area lighting - Automatic nozzle cleaning - Conveyor for small parts and scrap - Multiple suction box - Suction device and dust collector - Automatic stop - TFT color screen - 3.5’ floppy disk drive - TruTops laser lite - RJ 45 network card - Safety device Including: air cutting, 3.5’ laser head with high speed, Load Master preparation, additional post-processor Machine condition The machine was in operation until 2023. The laser source and optical path maintenance have been regularly performed by TRUMPF. Technical inspections and preventive maintenance operations have also been carried out annually by the manufacturer. The machine is currently shut down and requires repairs before recommissioning, including pipe replacement. A detailed quote for the repairs and parts to be replaced has been prepared by TRUMPF and can be provided to serious buyers. The overall condition of the equipment requires, at a minimum, the acquisition of the spare parts mentioned in the manufacturer’s offer in order to restore satisfactory production conditions. Sales conditions • Immediate availability • Sold as is • Disassembly, loading, and transport are the responsibility of the buyer • Documentation and repair quote available upon request This machine represents an excellent opportunity for a company with the necessary technical skills to restore it or seeking a machine base for spare parts. For any further information or to arrange a visit, please contact us.

Condition: ready for operation (used), Year of construction: 2011, number of axes: 7, pressing force: 133 t, This 7-axis TRUMPF TruBend 5130 was manufactured in 2011. It has a capacity of 3100 mm and 130 tons, featuring a Wila hydraulic upper and lower clamping system and a bending aid. The machine is equipped with CNC-controlled back gauge for X, R, Z1, and Z2 axes. If you are looking to get high-quality bending capabilities, consider the TRUMPF TruBend 5130 press brake we have for sale. Contact us for further details. Hodpfx Ae Aifl Ion Eefp • Capacity: 3100 x 130 tons • CNC-controlled back gauge: X, R, Z1, Z2 Additional equipment • Wila hydraulic upper and lower clamping system • Bending aid Technical Specification Bending Length 3230 mm

Condition: used, functionality: fully functional, Year of construction: 2011, power: 18 kW (24.47 HP), input voltage: 400 V, input current: 35 A, input frequency: 50 Hz, type of input current: three-phase, compressed air connection: 7 bar, We are offering this used TRUMPF TruMatic 3000 laser cutting machine, manufactured in 2011. Hedpfxj Aaxt Ro An Esfp Maximum cutting force: 165 kN Laser power: W Machine number: A0111A0021 Year of manufacture: 2011 Mains voltage: 400 V Mains frequency: 50 Hz Connected load: 18 kVA Control voltage: 24 V Required fuse rating: 3 × 35 A Compressed air connection: 7 ± 1 bar Nitrogen connection (N₂): 30 bar Oxygen connection (O₂): 20 bar If you have any questions or require further information, please feel free to send us a message or call us.

Year of construction: 1996, condition: excellent (used), Used very clean, well maintained Trumpf V series hydraulic down stroke cnc pressbrake for sale Trumpf v85 2metre x 85ton – 4axis cnc pressbrake in good condition – video at the bottom of the listing Make: Trumpf Model: Trumabend v85 Year: 1996 Max. pressing force: 850 kn / 85ton Max. stroke: 215mm Brake time: 79ms Total axis: 2axis back gauge / total axis 4 – y1 y2 x r and i axis Complete with: Hsdpji Igi Sefx An Eefp • Daylight: 390mm daylight • 2 axis back gauge • i axis – bottom base moves to use twin multi v without operator moving or changing the tooling • Fully serviced / Good condition

Condition: good (used), Year of construction: 2014, functionality: fully functional, Immediately available, maintenance and safety inspection new as of July 30, 2026! Description Year of manufacture: 2014 Bending length [mm]: 1020.00 Press force [tons]: 36 Control system: TRUMPF TASC 6000 Standard equipment Machine - Stable machine frame - Press beam - Highly dynamic, electromechanical direct drive (torque motor) - Inductive length measuring system with temperature compensation - Switch cabinet air conditioning - Ergonomic machine design Back gauge system - Rear back gauge system, 6 axes Tool clamping - Upper tool clamping, automatic - Lower tool clamping, automatic Hfedpfx Anszrwnto Esp Control system - TRUMPF TASC 6000 integrated - Numerical workshop programming - Windows XPe (embedded), Pentium M with 1.1 GHz clock frequency - 1 GB RAM - 15-inch touch screen Safety - Laterally pivoting safety doors - Protective cover at the rear - 2-button foot switch, for standing and seated operation - Rear back gauge system, 6 axes Ergonomics package: - Comfort support table (front) - Comfort footrest - Work area lighting front and rear (LED) - 2 document holders - 2 storage consoles - 1 measuring tool storage Productivity-Plus package: - Graphical workshop programming - Automatic tool clamping - BendGuard (with block laser) - Swiveling control panel - Bending line laser - Seat and standing aid - OCB – Operator Controlled Bending

Condition: excellent (used), Year of construction: 2000, Technical specifications: Hfedswimvwjpfx An Ejp Working length: 3050 mm Distance between columns: 2690 mm Press force: 130 t CNC control: DELEM DA65 2 D graphic Adjustable backgauge Controlled axes: Y1 / Y2; X; R; I CNC table bending compensation: Wila Moducrown Hydr. Tool clamping at the top and bottom Pneumatic tool shifting Number of bending aids: 2 Installation height: 535 mm Stroke: 220 mm Thrust: 410 mm Motor power: 12.5 kW CE mark Dimensions (length x width x height): approx. 3800 x 2350 x 3150 mm Weight: approx. 14 tons Accessories: 1 set of standard tools Condition: Good condition, tools in mint condition The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Max. pressing force: 360 kN Mounting height: 300 mm Hfsdpfx Ans Aifyxo Esp Clearance between columns: 932 mm Reach of the arms: 150 mm Working height: 1150 mm Working speed, Y-axis: 220 mm/s Maximum stroke of the Y-axis: 120 mm Inertial run time: max. 90 ms Minimum safety distance: 180 mm Return speed: 220 mm/s Speed of the X-axis: 1000 mm/s Speed of the R-axis: 330 mm/s Speed of the Z-axis: 1000 mm/s Positioning speed of the X-axis: 0.04 mm Positioning speed of the X-axis: 0.04 mm Positioning speed of the R-axis: 0.06 mm Travel range, X-axis: 240 mm Travel range, R-axis: 80 mm Space requirement: 1805 x 1330 x 2380 mm Machine weight: approx. 2,600 kg Total connected load: approx. 6 kVA Options: Rear backstop system, 6 axes Upper and lower tool clamping, hydraulic Comfortable support table in front (foldable) Comfortable footrest Work area lighting in front (LED) & in the back Swiveling control unit BendGuard safety device (with blocking laser) Ergonomics package Productivity Plus package Bending line laser Graphical workshop programming