Used Turret Rewinder for sale (1,824)

Year of construction: 1978, condition: ready for operation (used), A Dörries CNC vertical turning lathe is available. Faceplate diameter: 1600mm, turning diameter: 1800mm, turning height: 1500mm, max. travel: 1200mm, faceplate speed: 200rpm. Machine dimensions X/Y/Z: approx. 8400mm/4500mm/5300mm, weight: approx. 25000kg, control system: R&D. The machine’s electrical system and control were completely overhauled in 2010 by R&D Steuerungstechnik. Documentation available. An on-site inspection is possible. Hedpfx Agexq Ex Ds Iei

Condition: ready for operation (used), Year of construction: 1997, year 1997, speed: 500 m/min, roll dimension: 450 – 1550 mm, Max diameter of unwinding roll 1500mm Max width 1300 mm Hodpfxsxwp Uve Ag Isi Min width 380mm Brakes - hydraulics and disc brakes Max weight of unwinding roll - 2000 kg

Year of construction: 1987, condition: ready for operation (used), Max. coil weight: 10t, controls: SIEMENS S5, without documentation. Hsdpfx Asgwg Udsg Iji

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, operating hours: 3,550 h, Good day, We hereby offer you, without obligation, a used cable rewinding system (cable drum rewinding machine) with length measuring device, suitable for commissioning and winding cables onto drums of different diameters. Manufacturer: Jakub Thaler GmbH, Germany Model: KU-07 KKS Measuring Device Type: ME01 Year of Manufacture: 2019 Operating Hours: only 3,550 hours Load Capacity: 10,000 kg Applicable Cable Diameter: 10 – 80 mm Measurement Accuracy: +/- 0.5% Min. Drum Diameter: 500 mm Max. Drum Diameter: 2,800 mm Max. Drum Width: 1,750 mm Drive Power: 5.5 kW Rewinding Speed: 1 – 85 m/min. Note: The above technical data is taken from the operating manual, manufacturer brochures or other sources for which we cannot guarantee accuracy or completeness. Scope of Delivery: - Cable drum pay-off unit - Layering stand with length measuring device - Cable drum take-up unit with hydraulic power pack - Operator control panel - Machine documentation (available in German only) Hjdpfx Agevl Hcws Ioi Application Area and Condition: The system is suitable for rewinding (spooling) power cables, communication cables, and data cables from drum to drum. Cable length is measured during the winding process. The system was operational until the end of 2024, is fully functional and in good condition. We would be pleased if this machine meets your interest. Your Mertens & Frowein GmbH Service Team

Condition: good (used), Stock number: 2889 Manufacturer: Weiler Year of manufacture: 1969 Type / Model: FDU 260/38 Machine number: 11597/330 Control: conventional Center width: 400 mm Passage: 38 mm Tip height: 125 mm Hodpjugr Aaofx Ag Ioi Turning diameter over bed: 250 mm over slide: 140 mm Speed range: 30 to 2,500 rpm Number of turret positions: 6 Power requirement: 0.9 kW Accessories/equipment: Various collets and turret inserts Condition: good Weight: approx. 0.5 t Dimensions: 1,300 x 700 x 1,200 mm

Condition: ready for operation (used), Year of construction: 1981, Bridgeport BR2J2 Turret Milling Machine Digital Readout Spindle Taper R8 Table Size 1065 x 230mm Table Travel: X - 765mm Y - 305mm Knee Travel: Z - 405mm Quill Travel Z - 127mm Coolant 415V Electrics Coolant Hedpfx Ageyary Is Isi For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #79044 Machine Serial Number: 362070681W Cost: £4,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2011, turning diameter: 170 mm, spindle bore: 42 mm, CNC Lathe with 2nd Spindle, 2 turrets and Y-axis (7-axis) Control: Fanuc 31i-A Turning diameter: 170 mm Turning length: 503 mm Spindlebore diameter: 42 mm Spindle Nose: A2-5 Spindle nose sub-spindle: A2-5 Spindle (left) speed 6.000 1/min Spindle (right) speed 6.000 1/min Movement X-axis: X1: 135 / X2: 135 mm Hsdpfsx N S Hzex Ag Iji Movement Y-axis: +/- 31 mm Movement Z-axis: Z1: 503 / Z2: 503 mm Min indexing C-axis right spindle 0,001 ° Min indexing C-axis left spindle 0,001 ° Number of tools on turret 2x12 Tool Type: BMT 44 Bar Feeder: Iemca Boss 525E (Year 2011) Machine weight: 5,650 kg. If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: 24xx, For sale is a used but fully functional D6 with a turret; the machine was still in production up until it was shut down. The sale of the machine excludes any kind of guarantee or warranty! Sold as seen! Hodpfx Agjx Nphce Isi

Condition: used, Year of construction: 2001, Technical details: faceplate diameter: 2000 mm swing diameter: 2130 mm turning height: 1400 mm ram stroke range: 1000 mm workpiece weight: 10 t faceplate turning speed range: 1 -200 U/min main drive: 60 kW total power requirement: 95 kW weight of the machine ca.: 24 t dimensions of the machine ca.: 6,0 x 4,0 x 5,6 m with CNC SIEMENS 840 D C-axis driven tooling 15/22 kW automatic toolchnager 16-pockets through spindle coolant splash guarding and chip conveyor Hodpfx Asvb A Uzsg Iei *

Condition: used, Technical details: faceplate diameter: 1800 mm swing diameter: 2000 mm turning height: 1170 mm z-axis: 1000 mm cross rail adjustment - vertical: 800 mm faceplate speeds:: 2,5 - 280 workpiece weight: 12 t feeds: 1 - 6000 mm/min max. torque on the faceplate: 50000 Nm total power requirement: 85 kW weight of the machine ca.: 41 t dimensions of the machine ca.: 5,6 x 4,8 x 4,6 m Machine retrofit and overhould in 2005 with SIEMENS 840 D powerline control - 6 jaw hydraulic power chuck - tool changer for 12 tools - chip conveyor, coolant attachment, splash housing - various tool holders * Hodpfxjvb Db No Ag Iei

Condition: used, Year of construction: 2004, Technical details: faceplate diameter: 4770 mm swing diameter: 7000 mm turning height: 1000 mm slide stroke: 1000 mm workpiece weight max.: 100000 kg faceplate turning speed range: 2 - 20 U/min feed speeds: 1 - 10000 mm/min rapid traverse: 10 m/min ram head dimension: 250 x 250 mm main drive: 100 kW Hedpfxevb Hlwo Ag Iei total power requirement: 200 kW with CNC SIEMENS 840 D 2 Vertical Supports with toolchanger 12 pockets C-axis and driven tooling SK 50 37 Kw 3000 rpm Chip conveyor and coolant attachment *

Condition: used, Year of construction: 1971, Technical details: faceplate diameter: 2500 mm swing diameter: 2500 mm swing diameter: 2500 mm turning height: 2500 mm turning speed range - faceplate: 1,8 - 140 U/min workpiece weight max.: 15.000 kg feeds: 0,03 - 6,3 mm/U rapid speed: 2 m/min cross rail adjustment: 2150 mm max. ram stroke: 1500 mm power capacity: 55 kW weight of the machine ca.: 32 t Hedpfx Agjwpf Tbs Isi dimensions of the machine ca.: 4,1 x 7,6 x 6,0 m 1 turret head 1 RAM head *

Condition: used, Technical details: faceplate diameter: 1600 mm swing diameter: 1800 mm turning height: 1500 mm max. ram stroke: 1200 mm faceplate turning speed range -stepless-: 2,5 - 250 U/min workpiece weight max.: 10.000 kg ram head dimension: 240 x 240 mm feed range: 1 - 3000 mm/min power capacity: 45 kW weight of the machine ca.: 20 t modernized and overhauled in 2010 with CNC SIEMENS 840 D Hjdpfx Ajv Uw Treg Isi 12 positions automatic toolchanger telescopic covers splash guarding chip conveyor coolant attachment diverse toolholders *

Condition: used, Technical details: faceplate diameter: 4000 mm swing diameter: 4300 mm turning height: 330 mm faceplate turning speed range: 1 - 92 U/min workpiece weight: 18 t feeds: 1 - 4000 mm/min main drive motor: 55 kW total power requirement: 85 kVA Hsdevb Dq Rjpfx Ag Ioi weight of the machine ca.: 64 t dimensions of the machine ca.: 90, x 7,2 x 5,5 m with CNC SIEMENS 840 D for 4 axis 2 Vertical Supports tool Basic holder chip conveyor *

Condition: like new (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 68086, Machine can make rolls with paper core. And Coreless rolls (Without cardboard tubes) Semi-Automatic Coreless Prestretch Rewinding Machine Specification • Maximum parent roll diameter 500mm • Maximum web width 600mm. Master roll core 76mm diameter. 4 roller stretcher train geared to give a stretch of 335% • Servo driven rewind to vary collection tension from 240% to 335%. Adjustable external electronic rewind Hodpfxexpq T Re Ag Isi Variable speed drive up to 450 meters per minute. • Single position coreless rewind station for either 50, 60 or 76mm ID rolls. (with change parts) • Programmable electronic roll length counter. Maximum rewind roll diameter 250mm. Slitting blades for multiple finished roll winding (with change parts) Rolls can be produced with or without oscillation and edge guiding Film break sensor. 3 - phase 400 volt supply. / Air requirements - 4 cfm max. at 80 psi. Guarding to suit current C.E. requirements

Condition: used, Technical details: spindle passage: 60 mm turning length: 45 mm turning diameter: max. 56 mm drill depth: max. 70 mm revolution per minute: 48 - 1500 (spindle) U/min threading: Drehzahl: 24 - 750 U/min tool turret - number of stations: 8 total power requirement: 5,5 kW weight of the machine ca.: 2,4 t space requirement of the machine approx.: L:2,1x1,0x1,8 m Cam-controlled automatic lathe according to template. Workpiece is clamped via clamping cartridge. Turret head: disk turret Hahn&Tessky Esslingen, tool path 80mm, adjustment 36mm, distance collet/turret head min./max.: 72/188mm 2 pieces turning support, working stroke 45mm 2 piece cutting off support, working path approx. 40mm Cooling water system Hodpfx Aju Iwyijg Isi Machine is not connected. Sale at a low selling price. *

Condition: used, Technical details: table diameter: 4500 mm faceplate diameter: 4500 mm operating hours: 0 h swing diameter: 5000 mm turning diameter: 5000 mm workpiece height max.: 2500 mm control: Sinumerik 840D SL x-axis: 300 Hub/ram Slide mm x-axis: 2850 Hub / ram travel mm x-axis: 2850 working without tool mm x-axis: 5000 with tool changer mm w-axis: 1800 Querwegelevating cross rail mm tool holder / places: 12 tool taper: HSK 100 (spindle) workpiece weight: 100 t table speed: 1 - 50 U/min T-slots: 8 Stück (36 H12) stroke speed: fräsen ram speed: 4000 U/min rapid power traverse in X-and Z direction: 8000 mm/min Torque: fräsen: 100.000 Nm Torque: drehen: 200.000 Nm total power requirement: 80 (2x40) kW weight of the machine ca.: 140 t dimension machine xH: 11,5 x 6,6 x 8,4 m NEW CNC vertical turret lathe - manufactured upon official order and deposit. The photos shown are of a newly built machine that we delivered to a customer. (The photos are for illustrative purposes only.) Application of the manufacturing processes: Turning, such as external longitudinal turning, internal and external facing and profile machining. Grooving, such as internal and external Drilling, such as short hole drilling and deep hole drilling Hedpeu Ix H Defx Ag Isi Milling, such as face-corner profile and T-slot milling Thread cutting But also suitable for roughing and end machining. The machine bed, designed with a welded construction, absorbs extreme cutting forces. The table is made of high-strength meehanite cast iron. To withstand heavy loads, the part weight is supported by two high-precision tapered roller bearings. Furthermore, the table is equipped with hydrodynamic support for the workpiece. other features: automatic tool change jaw chuck (8 pieces with power clamping spindle and hardened jaws) incl. cooling system 40bar with filter unit hydraulic and lubrication equipment ATOS and Dropsa with measuring system of axes Heidenhain Renishaw NEW - with guarantee & service via WWM AG *

Condition: used, functionality: fully functional, We are selling this machine. Connected, test runs possible. Documentation included. Chuck diameter: 8,000 mm. Maximum turning diameter: 12,500 mm. Turning height: 2,200 mm. Complete overhaul and modernization carried out in 1991. Maximum workpiece weight: 200,000 kg. Machine weight: 550,000 kg. Please submit your offer. Hsdpfx Asydqfdsg Iji

Condition: ready for operation (used), Year of construction: 2007, XYZ SMX SLV 3 Axis Turret Milling Machine ProtoTRAK | SMX Control (2007) 3 Axis CNC Capacity (X Axis, Y Axis & Quill) Spindle Taper ISO 40 Spindle speeds to 70 - 3600 RPM Table Size 1473 x 305mm Table Travel: X - 1000mm Y - 410mm Knee Travel: Z - 413mm Hedpfx Aex Tiq Sog Iei Quill Travel Z - 127mm Air Power Draw Bar Supplied with a range of spindle tooling Coolant Year of Manufacture: 2007 Weight: 1850 Kgs Power Requirements: 18A *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79109 Machine Serial Number: 12308 Cost: £14,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2013, Technical details: Hjdpfxsuyp Eno Ag Isi faceplate diameter: 800 mm power requirement: 110 kW weight of the machine ca.: 37.000 / total 52.000 t transport measurements machine: 5,07 x 2,98 x 3,90 m clamping diameter: 800 mm : Ø 800 x 720 mm Tool bore: Capto C6 tools in tool magazin: 2 x 80 With C-Axis *

Condition: like new (used), Year of construction: 1998, functionality: not functional, turning height: 1,900 mm, workpiece weight (max.): 15,000 kg, turning diameter: 2,630 mm, faceplate diameter: 2,500 mm, total height: 5,000 mm, total width: 4,800 mm, total length: 4,800 mm, rotary table diameter: 2,500 mm, table load: 15,000 kg, table diameter: 2,500 mm, year of last overhaul: 2025, warranty duration: 12 months, overall weight: 38,850 kg, table speed: 2,500 mm/min, SC2700 Vertical Turning Lathe 2700 with 2 Work Heads - Retrofit Completed Specifications: Retrofit status: recently upgraded (mechanical, electrical, hydraulic systems), in course to be put under power. Electric cabinet: new electric equipment, cables, portcables, covers. Main motor: original 55 kW, revised. Condition: mechanically like-new, low working hours. Inspection: available any time. At request, it can be overhightened for a higher workpiece, or receive an CNC upgrade. Price, install and transport on request. More technical specifications on request. Hedpfxeygldgo Ag Isi

Year of construction: 2017, condition: used, functionality: fully functional, machine/vehicle number: 18/11/17, We offer this used Kram KRAM PST 2 ECO rewinder, year of construction 2017. Manufacturer: Kram Model: KRAM PST 2 ECO Year of manufacture: 2017 Condition: used Category ID: 543 Type: Rewinder For sale is a reliable and economic rewinding machine designed for converting stretch film (rewinding from jumbo rolls to hand/machine rolls). Manufactured by Kram Family Company (Poland). The machine is equipped with a Mitsubishi touch panel for full control over the converting process, including film length and speed adjustments. This machine allows for fully automatic core feeding and manual film attachment for the first roll only. It is an ideal solution for efficient stretch film production. Technical Specifications: Model: PST-2 Economic Manufacturer: KRAM Family Company (Poland) Year of Manufacture: 2017 Rated Power: 5.5 kW Linear Speed: 0 – 1000 m/min Film Width: 500 mm Max. Converted Roll Width: Up to 240 mm Max. Master (Jumbo) Roll Weight: Up to 70 kg Capacity/Output: 120m roll: ~ 5 rolls in 1 min 10s Hsdpfjycuwuex Ag Isi 240m roll: ~ 4 rolls in 1 min 30s Core Diameter: 50mm, 76mm (optional) Internal "Master Core" Diameter: 76mm Air Consumption: 110 l/min Voltage: 3 x 400V AC / 50Hz Key Features & Equipment: Control System: Mitsubishi Touch Panel Automation: Automatic core feeding (manual start only for 1st roll) Cutting: Thermal knife system Sensors: End of jumbo roll sensor, film tearing sensor Languages: Interface available in English, Spanish, German, etc. Condition: Used, in good working condition. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 102, turning height: 1,250 mm, workpiece weight (max.): 8,000 kg, turning diameter: 1,550 mm, faceplate diameter: 1,250 mm, spindle speed (max.): 3,000 rpm, TECHNICAL DETAILS Turning height: 1,250 mm Workpiece weight: 8,000 kg Turning diameter: 1,550 mm Faceplate diameter: 1,250 mm Faceplate speed: 200 rpm Spindle speed: 3,000 rpm Tool changer: 15 positions MACHINE DETAILS Control: Siemens 840 D Type of supply current: Alternating current (AC) Hedoybbi Iopfx Ag Ioi Year of last overhaul: 2000 EQUIPMENT C-axis Infinitely variable speed 3-jaw hydraulic-mechanical chuck Coolant system Belt filter unit Internal coolant supply

Condition: used, This listing is for a CAB ER6 External Rewinder. The unit is in full working condition and is ready for immediate release. The CAB ER6/300 External Rewinder is a versatile and efficient label rewinding solution designed to work seamlessly with the Squix 6.3 label printer and other 6-inch label printers. Featuring a built-in power supply, it operates independently without requiring power from the printer, making it a universal and flexible option for industrial labeling applications. Key Features: 🔹 Compatible with Squix 6.3 and Other 6-Inch Label Printers – Ensures seamless integration and efficient operation. 🔹 Wide Material Support – Handles labels up to 180mm wide, accommodating various printing needs. 🔹 Large Roll Capacity – Supports label rolls with a maximum outer diameter (OD) of 300mm. 🔹 Dual Winding Modes – Allows labels to be wound inside or outside for greater flexibility. 🔹 Independent Operation – Built-in power supply eliminates dependency on the label printer. 🔹 Adjustable Core Size – Compatible with 44mm and 76mm cores for diverse applications. 🔹 High-Speed Rewinding – Maximum speed of 300 mm/s ensures fast and efficient label handling. Hjdpfx Agjxxya Sj Isi Specifications: Compatible Printers: Squix 6.3 and other 6-inch label printers Material Width: Up to 180 mm Maximum Roll Diameter: 300 mm Winding Options: Inside or Outside Core Sizes: 44mm or 76mm Rewind Speed: Up to 300 mm/s Power Supply: Built-in (independent from printer) Dimensions: 350 x 340 x 390 mm Weight: 6.3 kg Benefits: Universal Compatibility – Works with various 6-inch label printers, ensuring broad usability. Enhanced Efficiency – High-speed rewinding improves workflow and productivity. Independent Power Supply – Eliminates extra load on the printer, reducing wear and tear. Flexible Winding Options – Supports both inside and outside winding, offering customized label handling. Large Roll Capacity – Handles big label rolls, minimizing downtime due to frequent roll changes. Applications: 🔹 Industrial Labeling – Ensures efficient label rewinding for high-volume printing. 🔹 Warehouse & Logistics – Helps streamline labeling processes for inventory tracking. 🔹 Manufacturing – Optimizes label handling for product identification and compliance. 🔹 Retail & Distribution – Improves efficiency in product labeling and packaging.

Condition: used, Year of construction: 1999, Working area 4000 x 1500 mm Max pressure 30 ton No. of stations in turret 21 pcs. No. of indexing tool stations 10 pcs. Max. material thickness 8 mm Max. sheet size 3061 x 1528 m Hsdpfx Aexyiw Ajg Iei Max. punch dia. 89 mm Control: Siemens Sinumeric 840 D Equipped with: 4 threading stations Automatic loading/unloading system