Used U K 49 for sale (60,695)

Condition: used, Holz Her Perfect 1422 K + PU Heavy-duty version, for edge banding up to 20 mm thickness Fully automatic roller magazine – crosscut shear Fully automatic edge magazine for strip material Cartridge + PU gluing station Flush trimming Multifunction milling unit, flush – chamfer – radius milling with mechanical digital adjustment Soundproof enclosure CE-compliant design Machine is FUNCTIONALLY TESTED and in VERY GOOD CONDITION Csdpfxey Rm Iis Acporh available ex-stock Lieboch

Condition: used, mileage: 854,993 km, power: 220 kW (299.12 HP), first registration: 05/2009, fuel type: diesel, number of seats: 49, gearing type: automatic, next inspection (TÜV): 03/2027, emission class: euro5, color: white, Equipment: ABS, electronic stability program (ESP), soot filter, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle on a non-binding basis until a contract is concluded, subject to errors, typographical errors, and prior sale: Mercedes Benz Citaro O530 G 18m (49+101+1+2 emergency seats) (Vehicle 736) Cjdpfx Asz H Ed Ajcpjrh Registration date: 05/29/2009 854,993 km Engine: 11,967 ccm 220 kW / 300 hp Euro 5 EEV MOT valid until 03/2027, technical inspection valid until 09/2026 Permissible total weight: 29,000 kg, unladen weight: 16,780 kg, payload: 12,252 kg Overall length: 17,940 mm x overall width: 2,550 mm x overall height: 3,100 mm Tires: 275/70R22.5, front approximately 90%, center approximately 50/50%, rear approximately 90/90%, rear approximately 60/60%, rear inside approximately 40/40% Double doors at the front, middle, and rear Driver's cab with door Ramp, 2nd double door Retarder activated via the brake pedal Fully automatic transmission Microphone Manually operated windows 2 x electric and heated mirrors Auxiliary heater + 2nd heater LAWO system via cash register ISRI driver's seat with heating + ventilation 49+101+1+2 emergency seats Emergency exit 12-volt socket Frame with some signs of rust 06/26/2024: Tie rod on the right side replaced 08/06/2024: Door 3 pressure wave switch replaced 12/16/2024: Alternator belt tensioner replaced, front axle brake pads + discs replaced, C-axle brake pads replaced, right-hand side C-axle caliper guide + combination cylinder replaced, left-hand side C-axle brake cylinder replaced 01/28/2025: Coolant expansion tank replaced 06/20/2025: Cylinder 1 exhaust manifold screw replaced 12/03/2025: Hose to the water pump replaced, steering hose replaced 12/16/2024: Diagonal arm on the left C-axle replaced 12/12/2025: Right-hand side C-axle position sensor + bracket replaced, ECASD calibrated 12/03/2025: Tie rod on the left side replaced, air spring on the B-axle right front + air spring on the C-axle left rear replaced, B-axle left and right brake caliper guide and brake pads replaced 06/06/2026: Axle trunnion cover on the front axle left upper replaced Various signs of wear and tear, consistent with age Last inspection on 03/06/2026 at 840,000 km, next inspection at 900,000 km, next inspection at Price: 10,000.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. For both parties, the place of jurisdiction for disputes up to a value of €10,000 is the district court of Ludwigslust; for disputes exceeding this value, it is the regional court of Schwerin. Subject to errors, typographical errors, and prior sale.

Condition: used, machine/vehicle number: 008441, Max. panel width: 1100 mm Cjdpoyz Slbsfx Acporh Max. panel length: 5700 mm Max forward speed: 30 mt/min Number of shafts: 1 Motor Power: 90 KW

Condition: excellent (used), Type: Jeol JSM-6490 Jeol JSM-6490 Scanning Electron Microscope (PC-SEM) Modern, high-resolution, digital scanning electron microscope featuring newly developed electron optics and an intuitive, graphical user interface (GUI) running on Microsoft Windows XP Professional. Instrument configuration includes the following features: • Magnification range: 5x – 300,000x • Acceleration voltage: 0.3 – 30 kV • Tungsten filament cathode (LaB6 cathode optional) • Large fully motorized sample stage with eccentric tilt capability, including: – Graphic navigation on the sample holder – Easy sample navigation via click-center-zoom – Field-of-view controlled navigation via two navigators – Relative coordinate navigation – Save and recall of sample positions – Adjustable stage field-of-view selection • Field-of-view correction during rotation via computer-driven eccentric rotation • Field-of-view correction during tilting via computer-driven eccentric tilting • Calculation of the possible tilt angle based on sample geometry • Automatic focus tracking when moving the sample in the Z-axis • Intelligent limit switches for all motorized axes • Stage travel: X = 125 mm Y = 100 mm Z = 5 to 80 mm (stepless) T = -10°C to +90°C R = 360° (continuous) • Secondary electron detector for high vacuum operation • Newly designed, super-conical objective lens for optimal resolution at high tilt angles • Guaranteed SE image resolution: 3 nm at 30 kV and 15 nm at 1 kV • Simultaneous live imaging with multiple detectors • Powerful image measurement functions • Movie function for recording dynamic processes • Versatile specimen chamber with numerous expansion options: free ports for EDX, WDX, EBSD, cathodoluminescence, etc. • Low-maintenance, quiet pump system consisting of a fore vacuum pump, vibration-free high-performance diffusion pump, and electromagnetic valve control • Comprehensive safety procedures against misuse and external media failure Crsdpszd Ufaefx Acpsh • Ergonomic, height-adjustable system table • SEM starter kit including 2 sample holders, tool kit, and 6 replacement filaments Additional equipment for SEM: • Turbomolecular pump (instead of standard diffusion pump) – Use of a turbomolecular pump eliminates the need for cooling water during SEM operation. Further SEM equipment: • PC for SEM control including TFT monitor • ΟΧ200 Bruker Quantax 200 Extended EDX System – Bruker EDX software will be transferred to new owner upon purchase • Nitrogen-free, energy-dispersive X-ray analysis system including: – SDD detector with 127 eV energy resolution or better – Detection for all elements from boron upwards – Vibration-free, maintenance-free. Peltier cooled (no nitrogen required) – Pulse processor – TFT monitor – Spectrum measurement and element identification – Fully automatic, quantitative, standardless elemental analysis – Image acquisition – Ultra-fast qualitative line scan – Ultra-fast qualitative element mapping – Data management and archiving system – Report generation and results output – Data communication – Installation and user training – HyperMap – Multipoint analysis – Bruker xFlash detector (SDD) with signal processing unit SVE III Scope of delivery: (see photos) Condition: used (Subject to changes and errors in the technical data and specifications!)

Condition: ready for operation (used), Siemens 6FC3641-0AX SINUMERIK PRIMO SG complete control unit SN:A1495045, used, normal signs of use, 100% functional, scope of delivery as per photos Crjdpfxen Emz Io Acpjh

Condition: used, Year of construction: 2016, General condition: average Csdszwhvfepfx Acpsrh Technical condition: average Visual appearance: average Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: ready for operation (used), Siemens SIMOTICS 1FK7063-2AF71-1EH0 synchronous motor SN: YFED614963604004 – Encoder AM2048S/R E50 / Brake 24VDC 18.0W 3606301, professionally fully overhauled and tested with 12 months warranty, 100% functional, delivery as per photos. Crjdpsxptuwofx Acpjh

Condition: ready for operation (used), Siemens 6AV7872-0BF30-0AC0 Simatic Panel PC 677B (AC) 15" Touch Industrial PC, SN: VPX8854249, serial number as shown in the photo, used, in good condition, 100% functional, scope of delivery as shown in the photos. Crjdpfxei Edg Ts Acpoh

Condition: reconditioned (used), functionality: fully functional, pressure: 160 bar, input voltage: 400 V, overall weight: 140 kg, temperature: 150 °C, NILFISK ALTO NEPTUNE 4-49 X HOT WATER PRESSURE WASHER BUILT-IN HOSE REEL The unit comes with new accessories, including an R+M (German brand) spray gun, a stainless steel lance, a steel-braided hose, and a 25° power nozzle. Double lance with two nozzles makes a pressure regulation possible A durable brass pump head with new ceramic pistons and seals ensures long-lasting, trouble-free operation. A highly efficient three-phase motor ensures stable performance, even during prolonged use. With an operating pressure of 160 bar and a flow rate of up to 900 l/h, the machine is effective for heavy-duty tasks in construction, industry, logistics, and agriculture. Each unit we offer features individually taken photos; you are buying the exact machine shown. TECHNICAL DATA: Supply voltage [V]: 400 (3-phase) Flow rate [l/h]: 900 Operating pressure [bar]: 160 Max. Heating temperature [°C]: 80–150 Connected load [kW]: 6.9 Detergent tank [l]: 10 Hose length [m]: 20 Weight [kg]: 140 EQUIPMENT: Built-in hose reel NEW heavy-duty spray gun (German brand R+M) NEW double lance with pressure setting Crodpfoz Egq Iex Acpeh NEW reinforced 20m high-pressure hose with steel braiding NEW 25° power nozzle Water filter and GEKA claw couplings – FREE KEY FEATURES: Open oil system – no operating time limits Built-in chemical tank allows for direct detergent dosing via the machine Highly legible and intuitive control panel Simple design and easy access to internal components make the machine user-friendly and easy to service

Condition: ready for operation (used), Huber Ministat 240 Compact Refrigerated Circulating Thermostat for Laboratory and Industrial Use, SN: 74948/07, used, normal signs of wear, 100% functional, scope of delivery as per photos. Crodpfx Aox Etu Ejcpeh

Condition: used, Baumüller frequency inverter 55-88 kW, BUM63A-150- removed from Krauss Maffei KM 18 C3 - removed from running machine - fully functionalmanufacturer: Baumüller Nuremberg type: BUM63A-150 spare part no.: 6443081 Cjdeltrpzopfx Acperh manufacturer no.: 345449 Dition: gebraucht

Condition: used, Year of construction: 1986, Fensterfalztasche - Altarfalztasche - Gateway Buckle MBO für K/T 79erYear 1985 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Csdpfxjh Ax Aqe Acperh On Stock Emskirchen / Nürnberg - Can be test

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,900 kg, maximum load weight: 34,100 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 9,300 mm, loading space width: 2,420 mm, loading space height: 2,150 mm, loading space volume: 49 m³, total length: 10,300 mm, total width: 2,550 mm, total height: 4,040 mm, suspension: air, tire size: 385/65 r22.5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Further Information Chassis Fine-grain steel welded construction, lightweight design, fifth wheel plate with interchangeable 2 kingpins Curved front end, patented 24-ton, 2-speed landing gear, single-sided operation, with straight lower part, without push-pull compensation Wedge supports + holder Under-run protection, foldable Semi-shell fenders Integrated fender holder, surface repels stones Towing hook at the rear Axles + Suspension Crjdpfx Acji Ri Idjpsh SAF disc brake axles Axle/suspension laser-aligned, reduces tire wear and fuel consumption Air suspension 1st axle: automatic lift axle, including forced lowering and starting assist, activated by 3x braking (starting assist functional up to an axle load exceeding 30% and a speed of max. 25 km/h) Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Braking System 2-line pneumatic braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be pulled by tractor units that ensure the effectiveness of the ABS! With lifting and lowering valve Vehicle - Driving Stability System Wheels & Tires 385/65R22.5, manufacturer's choice Polished aluminum rim, manufacturer's choice Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pin socket at the front, without connection cable Hydraulics Low-pressure cylinder, max. 170 bar, smallest stage hard-chromed, with HDK screw-on fitting, fixed part, NW 48 mm Actuation hydraulically via truck auxiliary drive Tippers Aluminum box tipper, sloping front wall, 5 mm thick, with external side walls made of 30 mm hollow profile, cleanly welded, with upper edge profile that prevents spillage of bulk goods. Interior with access ladder on the front wall Shovel and broom holder on the outside of the front wall Greenline - conical and aerodynamic tipper body shape Membrane - rear wall Rear wall as a swing-open flap with double-joint hinge, externally mounted with 2-fold hook locking. Rear wall with rubber seal Note! Heat-resistant up to max. 170°C! Floor continuously 5 mm thick, Brinell 110 Note! Only for the transport of sand, gravel and rolled gravel with a maximum grain size of up to 20 mm! All other transported goods are excluded from the warranty! Standing platform with access ladder, connecting plate for air/electricity and brake with large space for the best possible operation. Roll tarp, single-sided for storing on the right-hand side (when facing forward), with central locking on the left-hand side (when facing forward) Operating instructions For the transport of salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod to protect against rust The specified total weight is technically possible, but depending on the cargo, the total weight may not be reached while complying with the permissible axle/support and saddle loads. (Poor driving and handling behavior possible due to incorrect load distribution) Country of registration / Signs Germany with Dekra approval and certificate (according to §13 EG - FGV) 24/7 service hotline pre

Condition: refurbished (used), Year of construction: 2020, operating hours: 4,249 h, load capacity: 1,600 kg, lifting height: 4,640 mm, load center: 500 mm, fuel type: electric, mast type: triplex, construction height: 2,105 mm, battery voltage: 51 V, fork length: 1,150 mm, empty load weight: 2,408 kg, FRIEDMANN FORKLIFTS – OVERHAULED BY EXPERTS. FOR PROFESSIONALS IN ACTION Our forklifts are technically refurbished to meet FEM-4.004 and current safety standards – for maximum quality and your safety. From the frame to the battery, including the drive system, brakes, steering, and electrical system – each vehicle is thoroughly inspected and repaired. * Made in Germany – with responsibility and precision * Strict technical inspection * 400+ vehicles available * Worldwide transport & customs clearance * Service & spare parts at fair prices * Personal support – even after the purchase Test and get advice on-site now – we will find the right solution for you. Forklift data: Manufacturer: Jungheinrich Type: Front forklift EFG 216k Drive type: Electric Load capacity: 1,600 kg Year of manufacture: 2020 Operating hours: 4,249 Lifting height: 4,640 mm Mast type: Triplex Free lift: Yes Overall height: 2,105 mm Fork length: 1,150 mm Unladen weight: 2,408 kg Load center: 500 mm Tires: Solid rubber Crodpfx Aoz Ikgxocpjh Model type: EFG 216k Battery type: Lithium-ion Voltage: 51 V Battery weight: 2,408 kg Cabin equipment: SoloPilot control Lighting: Work lights 2x front Lighting: Work lights 2x rear Lighting: Bluespot rear – safety light Attachment: Side shifter Attachment: Additional hydraulic circuit – routed to the fork carriage

Condition: new, Shredder Shafts for Metal and Car Bodies fitted in Hammel 950, Arjes 950, Lindner U95, Olnova95 all types availlable WERT GmbH exclusively manufactures various types of shredder shafts for shredding metal, wood, waste wood, roots, mixed construction waste, tires, construction rubble, concrete, and scrap tires. "MADE IN GERMANY" We manufacture exclusively in Germany using the finest materials. Crodofg Adljpfx Acpeh We impress with our high level of workmanship and quality. Delivery time by arrangement WERT GmbH is a metal construction company that specializes in the development and production of twin-shaft shredding tools for renowned brands such as Hammel, Arjes, Linder, Eggersmann, Terex and Keestrac. With more than 50 different configurations, an in-house design department and a highly qualified team, we offer tailor-made, innovative solutions that meet the highest quality standards. Our goal is to continually meet our customers' individual requirements through technological excellence and improvement. We serve companies from various sectors, including waste management, recycling and mechanical engineering, and place great value on long-term partnerships. With our reliable and powerful shredding solutions, we support our customers in increasing their efficiency and competitiveness.

Condition: used, mileage: 278,847 km, power: 175 kW (237.93 HP), first registration: 11/2008, fuel type: diesel, empty load weight: 6,640 kg, maximum load weight: 6,360 kg, overall weight: 13,000 kg, wheelbase: 3,080 mm, next inspection (TÜV): 11/2026, fuel: diesel, color: orange, driver cabin: other, gearing type: other, emission class: euro4, suspension: other, total length: 5,100 mm, Year of construction: 2008, operating hours: 19,857 h, construction height: 3,260 mm, Equipment: ABS, air conditioning, trailer coupling, Are you looking for a versatile commercial vehicle that also performs well in demanding tasks? The Unimog 405 stands for robustness, versatility, and professional applications, making it an interesting choice for municipalities, the construction industry, landscaping, and many other sectors. Crodpfx Aozg N Etecpsh Equipped with air conditioning, a trailer coupling, and Variopilot, this vehicle not only offers practical applications but also adds extra comfort to everyday work. The trailer coupling expands the transport options, while the air conditioning ensures pleasant conditions in the cab. With Variopilot, the Unimog also offers a special solution for diverse work and steering requirements. The 6,374 cm³ engine and the mileage of 278,847 km emphasize the professional character of this vehicle. The initial registration date of 11/2008 makes the Unimog an interesting option for anyone looking for a versatile commercial vehicle for further demanding tasks. Air conditioning, trailer coupling, and Variopilot – practical features for more comfort and flexibility in daily use. Get in, get to work, and get going – discover the diverse possibilities of this Unimog 405! For sale only to commercial businesses (agriculture, freelancers, small and large businesses) or for export. Errors and prior sale excepted.

Condition: used, mileage: 645,478 km, power: 220 kW (299.12 HP), first registration: 04/2009, fuel type: diesel, number of seats: 49, gearing type: automatic, next inspection (TÜV): 01/2027, emission class: euro5, color: white, brakes: retarder, Equipment: ABS, electronic stability program (ESP), soot filter, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle on a non-binding basis, subject to final sale, errors, typos, and prior sale: Mercedes Benz Citaro O530 LE 13m (49+51+1) (Vehicle 129) First registered: 04/02/2009 645,478 km Engine: 11,967 ccm 220 kW / 300 hp Bluetec 5 EEV MOT valid until 10/2026, TÜV (technical inspection) valid until 01/2027 Permissible gross vehicle weight 19,000 kg, unladen weight 11,590 kg, payload 7,410 kg Overall length 13,570 mm x overall width 2,550 mm x overall height 3,400 mm Tires 275/70R22.5 all around, approximately 80% remaining Double doors at the front and rear Driver's cab with door Ramp Fully automatic transmission Microphone Retarder Electric windows 2 x electric + heated mirrors Auxiliary heater + 2nd heater Stop brake 49+51+1 seating arrangement Emergency exit Csdoz E Aa Sepfx Acpsrh 12-volt socket LAWO MOBITC 400 Frame members with some corrosion 01/10/2024: Rear axle left wheel hub sealed, front axle left brake caliper replaced. 04/05/2024: Front axle left upper control arm + bearing replaced. 10/22/2024: Water filter replaced. 01/22/2025: Front axle right brake caliper replaced, relay valve in front of the rear axle left replaced. 02/28/2025: Compressor head replaced, oil pan gasket replaced, pressure regulator replaced. 11/27/2025: 4-circuit protective valve replaced. Various signs of wear and tear, consistent with the age of the vehicle. Last inspection at 642,493 km on 04/21/2026, next inspection at 702,493 km. Price: 5,500.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties, for disputes up to a value of €10,000, is the local court of Ludwigslust; for disputes exceeding this value, it is the regional court of Schwerin. Subject to errors, typos, and prior sale.

Condition: used, Year of construction: 2008, operating hours: 14,357 h, axle configuration: 4x4, power: 129 kW (175.39 HP), maximum speed: 80 km/h, first registration: 03/2008, color: orange, empty load weight: 7,277 kg, maximum load weight: 4,723 kg, overall weight: 12,000 kg, number of seats: 2, gearing type: other, mileage: 14,358 km, suspension: steel, driver cabin: day cab, wheelbase: 3,000 mm, brakes: other, emission class: none, Equipment: ABS, air conditioning, all wheel drive, cabin, onboard computer, power assisted steering, trailer coupling, * German vehicle * 1st owner * Condition, see photos * Mulag verge mower head RMK1200 * Working width: 1,200 mm Crsdpfsxiyqfjx Acpeh * Mounted on Mulag boom MRS300 * Reach: 3.00 meters * Drive via PTO shaft * Mulag rear boom MHS800 * Lateral displacement: 1,600 mm * Reach right & left: 8.70 meters * with Mulag mower head MK1200 * Working width: 1.20 meters * Municipal hydraulics & rear hydraulics * Rear power lift * Height-adjustable trailer hitch * Trailer load: 32,845 kg * Comfort cabin with 2 seats * Air conditioning * Windshield heating * Outside temperature display * Comfort driver's air suspension seat * Electrically heated mirrors * JCB Power Shift transmission with three load-shifting stages * Disc brakes * ABS * Differential lock * Rotating beacon lights * Distance warning lights * Work lights * 4x4 all-wheel drive * Tires: 495/70R24 * Maximum speed: 80 km/h * LOF tractor unit, agricultural tractor * Wheelbase: 3,000 mm * GVWR: 12,000 kg If a new TÜV inspection is desired, we will gladly provide you with a quote from our partner workshops. Our offer generally does NOT include a new TÜV inspection, a new DGUV, a new SP, or a new UVV. You can find more trucks on our website at: We speak the following languages: German, English, Polish, Turkish Note: We strongly recommend and offer the possibility of inspecting and examining the goods so that the buyer does not have any false expectations regarding the condition and suitability. Inspection and examination are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is assumed for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicle. Subject to change, prior sale and errors.

Condition: ready for operation (used), Siemens 1HU3076-0AC01 - Z Permanent Magnet Motor, Z= see nameplate SN:E7K81492201005, professionally fully overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos. The agreed sales discounts do not apply to this item. Please inquire about the price separately! Crjdpfx Aex Dvitscpoh

Condition: excellent (used), Year of construction: 2021, ADLER K 750 – 270 cm Sweeper Attachment for Wheel loader mounting Year of manufacture: 2021 Working width: 270 cm Hopper capacity: 240 liters Voltage: 12 V Csdpozici Rofx Acporh In good, fully operational working condition.

Condition: used, Year of construction: 2017, operating hours: 4,921 h, Equipment: all wheel drive, Komatsu PC490LC-10 - Year of manufacture: 2017 - 270 kW Credpovc Tftsfx Acpeh - Weight: 47,410 kg - Camera - LED work lights - Cabin rockfall protection grid - Central lubrication system - Radio - An additional/standard arm will be supplied and is included with the excavator. Subject to errors and prior sale. Internal vehicle number: 10220 WhatsApp support available! If you have questions about the machine or need further information, feel free to contact us conveniently by WhatsApp. WhatsApp WhatsApp

Condition: used, maximum load weight: 32,950 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 02/2021, next inspection (TÜV): 03/2027, loading space volume: 49 m³, total length: 10,800 mm, total width: 2,555 mm, total height: 3,600 mm, Equipment: ABS, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle today, subject to final sale, errors, typos, and prior sale: Reisch, approx. 49 cubic meter grain tipper (Vehicle 684) First registration: February 25, 2021 Approx. 49 cubic meter loading volume Permissible gross vehicle weight: 39,000 kg Unladen weight: 6,050 kg Crsdoz Iihzspfx Acpsh Payload: 32,950 kg Overall length: 10,800 mm x Overall width: 2,555 mm x Overall height: 3,600 mm Rollover tarp, platform Hinged tailgate with grain slide Clean floor and walls GMP certified Foldable underrun protection 2 x reversing lights 2 x 12-ton, 2-speed geared winch SAF disc 1st lift axle Tires: 385/65R22.5, 1st approx. 50/70%, 2nd approx. 80/70%, 3rd approx. 70/50% Semi-fender mudguards Access ladder over semi-fender mudguards Shovel and broom holder on the driver's side, front TÜV (technical inspection) valid until 03/2027, emissions test valid until 09/2027 Price: €23,000.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to €10,000 is the district court of Ludwigslust; for disputes exceeding this amount, it is the regional court of Schwerin. Subject to errors, typos, and prior sale.

Condition: used, machine/vehicle number: 008399, Max. machining width: 1350 mm Working Table: Fixed pass height No. Operating units: 4 Nr Crsdpfx Asy I Tm Hscpeh

Condition: ready for operation (used), KUKA 1FK7103-5AF81-1YY3-Z S17 servo motor, serial number: YFU250410495018, used, in good condition, 100% functional, scope of delivery as shown in the photos. Credpfezb T R Rox Acpjh

Condition: used, empty load weight: 6,150 kg, maximum load weight: 28,850 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 11/2014, loading space length: 9,600 mm, loading space width: 2,440 mm, loading space height: 2,100 mm, loading space volume: 49 m³, suspension: air, tire size: 385/65R22.5, color: white, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, aluminum body, 3 axles, SCB axles (disc brakes), air suspension, 1st axle can be lifted, raising and lowering function, ABS (anti-lock braking system), roll tarp, catwalk, grain discharge chute, flap, U-shaped protection, side aluminum fender, supports. Body: 3-axle aluminum tipper with roll tarp, work platform & grain auger, approx. 49 m³, 3 x 9-ton SCB axles, disc brakes, 1st axle can be lifted! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors! Crodjzwvyxopfx Acpeh