Used Undercut for sale (32)

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, bar diameter (max.): 32 mm, turning length: 80 mm, rotational speed (min.): 3,150 rpm, drilling depth: 80 mm, No minimum price – guaranteed sale to the highest bidder! The machine is sold complete with collets, holders, and additional accessories! For more Schütte multi-spindle machines from the same location, see below! TECHNICAL DETAILS Maximum turning length: 80 mm Maximum drilling depth: 80 mm Largest material passage: 32 mm Maximum bar feed: 125 mm Spindle speed (turning): 200–3,150 rpm Spindle speed (right-hand threading): 11.2–1,575 rpm Thread cutting unit: Right-hand thread via undercut Ibedpez Ag A Iofx Ap Dsc MACHINE DETAILS Coolant capacity: 600 l Pump output: 170 l/min Dimensions & Weight Footprint: 7.3 x 2.5 m Height: 2 m Weight: 8,300 kg Voltage: 380 V Frequency: 50 Hz Main drive: 20.5 kW Immersion pump: 1.5 kW Feed drive: 1.5 kW Hydraulic pump: 1.5 kW Circulating oil pump: 0.25 kW EQUIPMENT 6 cross slides 6 longitudinal slides 6 cams for cross slides 6 cams for longitudinal slides Operating tools Collets Holders Additional accessories

Condition: new, Tube cutting aluminum circular saw / Undercut saw AC 550 Special equipment included in the price: Ibedpfx Aekckx Uep Doc Pneumatic vertical and horizontal clamping using 4 clamping supports Infinitely adjustable feed rate of the saw blade Minimum quantity lubrication 3m roller conveyor Description Saw blade diameter: 550 x 32 x 4 mm Speed: 3580 rpm Cutting range 90° rectangular: 260 x 200 mm Cutting range 90° square: 155 x 155 mm Cutting range 45° rectangular: 180 x 200 mm Cutting range 45° square: 130 x 130 mm Operating pressure: 6 - 8 bar Operating voltage: 380 V Total power consumption: 3 kW Machine weight: approx. 250 kg

Condition: new, Tube and aluminum circular saw / Undercut saw AC 400 Special equipment included in the price: Pneumatic vertical and horizontal clamping using 4 clamping supports Minimum quantity lubrication 3 m roller conveyor Iodpekckgvefx Ap Debc Description Saw blade diameter: 400 x 32 x 4 mm Speed: 3000 rpm Cutting range 90° rectangular: 150 x 100 mm Cutting range 90° square: 120 x 120 mm Cutting range 45° rectangular: 130 x 80 mm Cutting range 45° square: 100 x 100 mm Operating pressure: 6 - 8 bar Operating voltage: 380 V Total power consumption: 1.5 kW Machine weight: approx. 140 kg

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, bar diameter (max.): 51 mm, turning length: 102 mm, drilling depth: 102 mm, No minimum price – guaranteed sale to the highest bidder! The machine is sold complete with collets, holders, and additional accessories! For more Schütte multi-spindle machines available from the same location, see below! TECHNICAL DETAILS Maximum turning length: 102 mm Maximum drilling depth: 102 mm Maximum round bar diameter: 51 mm Maximum square bar diameter: 36 mm Maximum hexagon bar diameter: 44 mm Maximum octagon bar diameter: 47 mm Spindle drum diameter: 340 mm Standard bar feed: 125 mm Special bar feed: 290 mm Standard longitudinal slide travel, total: 125 mm Standard longitudinal slide travel, working stroke: 100 mm Special longitudinal slide travel, total: 160 mm Special longitudinal slide travel, working stroke: 125 mm Upper cross slide travel, total: 60 mm Upper cross slide travel, working stroke: 36 mm Middle cross slide travel, total: 60 mm Middle cross slide travel, working stroke: 36 mm Lower cross slide travel, total: 70 mm Lower cross slide travel, working stroke: 44 mm Maximum material pass-through: 51 mm Maximum material feed: 125 mm MACHINE DETAILS Coolant capacity: 660 l Pump capacity: 170 l/min EQUIPMENT Thread cutting device Right-hand threading via undercut Electric submersible pump Collets Tool holders Additional accessories Ibjdpfx Apoy R R Nwe Dsc

Condition: new, The powerful, mobile welding fume extractors AL-KO CLEAN UNIT F are the ideal solution for extracting welding fumes during manual welding, at automated welding stations, or with welding robots. Function: The welding fumes generated at the welding site are captured via extraction arms and hoods, among other means, and conveyed through a duct to the inlet of the AL-KO CLEAN UNIT F. In a large pre-separation chamber, coarse particles are first separated out. The subsequently arranged filter cartridges of dust class “M” filter out the remaining fine dust particles. During extraction operation, the differential pressure-controlled filter cleaning system removes adhering particles from the filter cartridges. Venturi nozzles on the filter cartridges maximize the cleaning efficiency, ensuring consistently high suction power and a long filter service life. A volumetric flow monitor continuously controls the required suction capacity and issues a warning if the nominal value is undercut. The collected dust is gathered in an easily mobile container. The cleaned air is recirculated into the room via the top of the unit. Applications: - For all welding applications with unalloyed or low-alloyed steel - Usable as extraction at individual welding stations and at duct systems with several extraction points - Extraction at fixed-position hoods and welding tables Advantages: - Consistently high suction power thanks to an efficient fan and long-life cleanable filters - Extremely quiet due to high-performance sound insulation - Suitable for individual welding stations and for connection to duct systems - IE3 motors for high energy efficiency - Wide performance range Ibedpfx Aswwkvqjp Dsc - Optional accessories for various welding applications

Condition: new, Year of construction: 2026, functionality: fully functional, saw blade diameter: 303 mm, cutting length (max.): 5,300 mm, cutting depth: 80 mm, extraction nozzle diameter: 140 mm, Striebig Standard 6224 TRK I (Wood Support Wall) Cutting capacity Type 6224 L: 5300 x H: 2240 / H: 2100 x D: 80 mm Saw Frame • Precision machined to 1/100 mm accuracy • Solid, self-supporting, firmly welded, torsion-resistant saw frame • TRK2 automatically adjustable aluminum slatted frame with plastic supports • TRK1 automatically adjustable wood support wall • 17-position roller support with 3 brake pedals (Type 6224) • 5.15 m long, divided center support at optimal working height (Type 6224), with aluminum grids • Aluminum small parts support (1 pair) for individual use Saw Beam • Stable, durable steel saw beam construction Saw Unit • Effortless operation thanks to fully balanced Saw unit • Robust motor carriage bearings ensure high cutting precision • Powerful, high-torque 5.5 kW (7.5 HP) motor • 300/30 mm carbide circular saw blade • 9 mm saw blade projection (undercut) • Integrated stop for horizontal strip cuts • SUPERSILENT sound insulation to reduce saw blade noise • Mechanical motor brake Design, Ergonomics • STRIEBIG-typical product design • Functional and user-friendly ergonomics Ibedpfju Nf E Aex Ap Doc Installation • Wall or freestanding installation possible - Pneumatically braked support rollers A05 TRK - Paper holder - Complete aluminum small parts support (2-part) - Vertical digital measuring system

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, bar diameter (max.): 32 mm, turning length: 80 mm, rotational speed (min.): 3,150 rpm, drilling depth: 80 mm, No minimum price – guaranteed sale to the highest bidder! The machine is sold complete with collets, holders, and additional accessories! For more Schütte multi-spindle machines from the same location, see below! TECHNICAL DETAILS Maximum turning length: 80 mm Maximum drilling depth: 80 mm Iodey R Rutspfx Ap Debc Largest material passage: 32 mm Maximum bar feed: 125 mm Spindle speed (turning): 200–3,150 rpm Spindle speed (right-hand threading): 11.2–1,575 rpm Thread cutting unit: Right-hand thread via undercut MACHINE DETAILS Coolant capacity: 600 l Pump output: 170 l/min Dimensions & Weight Footprint: 7.3 x 2.5 m Height: 2 m Weight: 8,300 kg Voltage: 380 V Frequency: 50 Hz Main drive: 20.5 kW Immersion pump: 1.5 kW Feed drive: 1.5 kW Hydraulic pump: 1.5 kW Circulating oil pump: 0.25 kW EQUIPMENT 6 cross slides 6 longitudinal slides 6 cams for cross slides 6 cams for longitudinal slides Operating tools Collets Holders Additional accessories