Used Upper Carriage for sale (5,051)

Condition: refurbished (used), Year of construction: 2016, operating hours: 3,162 h, load capacity: 1,400 kg, lifting height: 7,700 mm, fuel type: electric, construction height: 3,100 mm, Friedmann Forklifts – Reconditioned for Action Used forklifts from selected premium manufacturers, fully serviced, tested, and reconditioned to meet FEM-4.004 (UVV) standards. Individual modifications of any kind are possible according to customer requirements. International transport with suitable vehicles and customs clearance can be arranged upon request. See for yourself and visit us at our facility. Friedmann Forklifts – A Promise of Quality * Full functionality according to FEM-4.004 * Serviced and tested battery (C5 test) for electric models (minimum 70% capacity) * Usable tires according to FEM-4.004 (minimum 70% tread depth) * Mast, fork carriage, attachments, and hydraulic system inspected Dedpfx Aksy Rm Tfj Aecp * Steering axle inspected for safety * Fork tines and lifting chains with a maximum wear limit of 40% * New driver's seat and seatbelt * New paint in original colors and with original decals Forklift Data * Manufacturer: Jungheinrich * Type: ETV 214 – Reach truck * Drive type: Electric * Load capacity: 1,400 kg * Lifting height: 12,020 mm * Load center: 600 mm * Year of manufacture: 2016 * Operating hours: 5,536 * Serial number: 91106310 * Mast type: Triplex * Fork length: 1,150 mm * Overall height: 4,500 mm * Weight: 3,500 kg including battery Battery & Charger * Battery voltage: 48 V * Battery maintenance: 03/2024 * C5 capacity test: minimum 70% * Charger voltage: 48 V (upon request) Attachments & Special Equipment * Attachments: Side shifter * Special equipment: * Front tires: 0 x / Polyurethane / * Rear tires: 0 x / Polyurethane /

Condition: new, overall weight: 48,000 kg, axle configuration: 3 axles, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Heavy-duty design, air suspension with lift axle, axle load gauge for axle load, upper deck length approx. 4,400 mm incl. slope, lower deck length approx. 8,500 mm, loading height approx. 900 mm, for 2-axle and 3-axle semi-trailer tractors, kingpin adjustable, front wall, 16 x stake pockets in the outer frame, 32 x lashing points, ramp approx. 3,100 mm long, ramps with climbing strips on the outside, ramps for driving over on the gooseneck, further options available at extra cost, last axle as a steering axle, warning signs + lighting and rotating beacon, widening to 3 m with timber, hydraulic adjustment of the ramps, -- subject to printing errors, mistakes and changes, sample images --, more data available at: !, More details: ! Djdpe Agt E Ssfx Ak Ascp

Condition: new, overall weight: 48,000 kg, axle configuration: 3 axles, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Heavy-duty design, air suspension with lift axle, axle load gauge for axle load monitoring, upper deck length approx. 4,400 mm including slope, lower deck length approx. 8,500 mm, loading height approx. 900 mm, suitable for 2-axle and 3-axle semi-trailer tractors, adjustable kingpin, front wall, 16 x lashing point pockets in the outer frame, 32 x lashing points, ramp approx. 4,200 mm long (2-part), ramps with climbing strips on the outside, ramps for driving over on the gooseneck, further options available at an extra cost, last axle as a steering axle, warning signs + lighting and rotating beacon, widening to 3 m with timber, hydraulic adjustment of the ramps, -- subject to printing errors, mistakes and changes, sample images --, more data available at: !, More Details: ! Dodpfx As Agt Hajk Ajcp

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, pressing force: 200 t, working range: 4,100 mm, Equipment: CE marking, emergency stop, foot remote control, lower tooling, safety light barrier, upper tooling, Used Edwards Pearson Pr10 8 axis CNC pressbrake Bystronic EDWARDS PEARSON PR 10 ELITE MODEL CNC PRESS BRAKE Specifications: · 8 axis machine · 6 axis back gauge · Year 1999 · 200 Ton Bending Force Dcjdewcf Eqjpfx Ak Aop · 4,100mm Bending Length · Cybelec CNC Control Complete with a large amount of upper and lower tooling

Year of construction: 2016, condition: excellent (used), Used modern, very clean & fully serviced Bystronic Xact Smart160 3metre x 160ton cnc pressbrake for sale: Model: Xact Smart 160 Make: Bystronic Xact Smart 160 Year 2016 Byvision bend cnc touch screen control Working length mm: 3100mm / 3metre Max. press force kN: 1600 / 160ton Dsdoizi T Nspfx Ak Ajcp 2 axis back gauge – R and X axis 4 axis in total Max.stroke mm: 200 Rapid approach mm/s: 140 Working speed mm/s: 1-10 Return speed mm/s:115 With crowning Weight kg 1050 Machine will come with set of upper & lower tooling Delivery, installation and training can be arranged

Year of construction: 1998, condition: excellent (used), Used well maintained and very clean Edwards Pearson RTB 2metre x 60 ton 6axis CNC hydraulic down stroke pressbrake for sale 2050mm / 2metre x 60 ton capacity press brake Make: Edwards Pearson Dsdpepky Hzefx Ak Aecp Model: RTB60T 6axis: Y1,Y2,X,R,Z1 and Z2 Fully serviced Full length of upper and lower tooling Euro style upper tool clamps Delivery and installation in your works available

Condition: new, Year of construction: 2025, load capacity: 1,300 kg, lifting height: 4,300 mm, free lift: 1,450 mm, fuel type: electric, mast type: triplex, construction height: 1,982 mm, power: 0.65 kW (0.88 HP), battery capacity: 106 Ah, fork length: 1,150 mm, fork width: 180 mm, fork thickness: 60 mm, front tire type: polyurethane tires (black), rear tire type: polyurethane tires (black), overall weight: 772 kg, total height: 1,982 mm, total length: 1,724 mm, total width: 800 mm, color: red, SCHORR ELECTRIC STACKER 1300KG LIFT HEIGHT UP TO 4300MM WITH FREE LIFT CALL US NOW: 004959238968945 With the SCHORR electric stacker, you can easily transport heavy loads of up to 1300kg. Achieve a lift height of up to 4300mm (depending on the selected variant, either 2900mm or 4300mm). The forks have a standard length of 1150mm, making them ideal for both one-way and Euro pallets. Thanks to the free lift function, the mast only raises above the fork carriage once a lift height of 1.45m is reached – perfect for warehouses and rooms with low ceiling or doorway heights. Both variants fit through standard doors, as the overall height / mast height is under 2m. With the electric SCHORR stacker, you can stack pallets efficiently and ergonomically. Longer distances can also be covered without any issues. Its practical duplex/triplex mast allows the stacker to fit in any truck or container. CALL US NOW: 004959238968945 FURTHER ADVANTAGES OF THE SCHORR ELECTRIC STACKER: - Duplex or triplex mast (depending on variant) - Electric steering - Free lift function Prices, depending on lift height/variant: - 2900mm lift height: €4,201.00 net - 4300mm lift height: €5,797.00 net TECHNICAL DATA - Manufacturer (abbreviation): SCHORR Dcjdpfxjyfda Do Ak Ajp - Manufacturer’s model code: RR13HHE5F - Load capacity: 1.3t - Model: 290E // 430E - Own weight incl. batteries: 585kg // 772kg - Drive: Electric - Tyres: Polyurethane Basic dimensions - Overall length: 1710mm // 1724mm - Overall width: 800mm - Length including fork back: 560mm // 574mm - Lift: 2900mm // 4300mm - Free lift: 1450mm // 1440mm - Mast height lowered: 1930mm // 1982mm - Mast height extended: 3290mm // 4752mm - Fork dimensions DIN ISO 2331: 60mm x 180mm x 1150mm - Fork outside width: 570mm - Working aisle width with pallet: 800x1200 lengthwise 2133mm - Turning radius: 1300mm Speed - Travel speed with/without load: 4.2 km/h / 4.5 km/h - Lift speed with/without load: 0.1 m/s / 0.14 m/s - Lowering speed with/without load: 0.13 m/s / 0.11 m/s *Further technical data available on request. CALL US NOW: 004959238968945 Our competent team is happy to answer any questions about the SCHORR electric stacker with free lift 1300kg 2.9m / 4.3m. You can reach us by phone at 05923/8968945 or by email. We look forward to hearing from you and assisting with your inquiry. Are the upfront costs for a stacker too high for you? No problem, we offer leasing as an attractive financing option. For any questions regarding our available leasing offers, please contact us by phone at 05923/8968945.

Condition: excellent (used), functionality: fully functional, working width: 4,100 mm, pressing force: 320 t, Used Edwards Pearson Bystronic PR10 8 axis 4 metre x 320 ton CNC pressbrake for sale Edwards Pearson / Bystronic Model: PR10 320/4100 free standing CNC Pressbrake for sale 8axis / 8 axes: Y1 – Y2 – Z1 – Z2 – Z3 – X1 – X2 – X3 Dcedpouk Etbsfx Ak Aep Year 1998 Complete with: Cybelec DNC900 that nas a new lcd screen fitted 6 axis back gauge Euro style upper and lower tool adapters

Condition: used, Year of construction: 2005, Used 2-meter CNC press brake from Amada Dsdpfx As Aaztmjk Ajcp Type: HFP 20 50 Capacity: 2050 x 50 tons Y1, Y2, X1, X1, R1, R2, Z1 and Z2 CNC controlled WILA NS hydraulic upper and lower clamping system Automatic Akas Fiessler safety system Year of manufacture: 2005 New computer in the control cabinet

Condition: good (used), Year of construction: 2007, • Maximum possible drilling depth: 1200 mm • Maximum hole diameter: 32 mm • Minimum drilling diameter: 6 mm • Longitudinal travel (X-axis) table: 1800 mm • Cross travel (Z-axis) column: 1700 mm • Cross travel (W-axis) drilling head: 1150 mm • Vertical travel (Y-axis) drilling head: 1200 mm • Clamping surface NC table: 1500 x 1000 mm • Maximum table load: 10 t • Rotary axis (B-axis) rotary table: 360° • Rotary axis (A-axis) drilling head: -25°/+15° • Feed rate: 1-15 m/min (Y-axis: 1-10 m/min) • Rapid traverse speed in all axes: 15 m/min (Y-axis: 10 m/min) • Maximum spindle speed: 6000 rpm • Minimum spindle speed: 60 rpm • Tool holder: SK 40 • Tool clamping: OTT Dodpfx Akoxyf E Ne Aocp • Rated power main drive (100% ED, S1/40% ED, S6): 9/13 kW • Coolant tank capacity: 1000 l • Maximum coolant pressure: 100 bar • Low-pressure external and high-pressure internal coolant supply • Power supply: 3x 400 V; 50 Hz • Required installation space (L x W x H): 6550 x 5350 x 4130 mm • Machine weight: 12,000 kg Deep Hole Drilling Machine Equipment • CNC control: HEIDENHAIN iTNC 530 • Interpolated rotary table with minimal backlash, dimensions 1500 x 1000 mm • Swiveling drilling head +15°/-25° • Shank drilling head • Handwheel HR520 • Fixed supports (2 units) • Tool magazine: ELB tools: 12 pcs (max. diameter: 32 mm / max. length: 1550 mm) Standard tools: 12 pcs (max. diameter: 140 mm / max. length: 400 mm) • Direct measurement and positioning system in X, Y, and Z axes • Collision monitoring system for supports and drill sleeves • Oil cooler • Coolant flow control system • Adjustable coolant nozzles • Cooling unit for electrical cabinet • Enclosed upper cover (roof) • Drip tray for machine and tank facility (tray height 30 mm) • Extraction system • Infrared touch probe • Drilling depth extension 1200 mm (retrofit) • Chip conveyor

Condition: used, functionality: fully functional, Year of construction: 1996, Motorized Swivel Bending Machine Manufacturer: HERA, Model: SM4 2500x6mm Year of manufacture: 1996 Technical data Manufacturer: HERA Model: SM 4 Year of manufacture: 1996 Capacity: 2520 x 6 mm Upper die stroke: 450 mm Lower die adjustment: max. 80 mm Bending die adjustment: max. 100 mm Operating voltage: 400 V / 50 Hz Control voltage: 230 V Dcode Afu Hkspfx Ak Aop Dimensions: Width: 3.9 m, Depth: 2.75 m, Height: 1.9 m Weight: approx. 7 t Equipment • Motorized back gauge 1000mm with ball roller support table • Motorized bending die adjustment • Sharp clamping bar 45° • Bending bars: 10mm, 20mm, 40mm • Segmented support foot, height 130mm, length 2500mm All information without guarantee. An inspection while the machine is running is possible at any time in our showroom.

Condition: excellent (used), Year of construction: 2017, operating hours: 3,200 h, pressing force: 130 t, Space requirement: 11,500 mm x 10,000 mm + Increased installation height/lift + 230 mm + 4-axis backgauge system + Rear work area lighting + Front work area lighting - TruBend documentation Automation BendMaster (60) Standard equipment: BendMaster - Sturdy base frame and manipulator made of cast aluminum construction - Load capacity 60 kg, sheet plus gripper - Low-level floor track in welded construction - Sheet sensor for contour detection - Rotary feedthrough for quick gripper change Gripper coupling on the BendMaster - Sensor system for 4-axis backgauge system - Electric drives - Double sheet detection - NC regrip station - Vacuum generation for suction grippers Control - TRUMPF PC control with operator terminal - Teleservice via internet Dedpfx Akoxayl De Aocp - Convenient operation: screen, mouse, keyboard Safety - Safety fence with access door Special equipment + Track extension to 10 m + Gripper change console + Modular vacuum gripper without separation (materials for 3 grippers) + Modular vacuum gripper with separation (materials for 3 grippers) + Clamp gripper with rotary axis + Sheet removal station with linear axis + Additional pallet for sheet removal station + Right-hand side door for safety fence (or left-hand side in combination with ToolMaster) Machine - Robust machine frame entirely in steel construction - Press beam - Spherical mounting of pressure beam with inclined position - Electro-hydraulic upper drive system with 4-cylinder technology - Optical set-up and positioning assist with control valves - Generous free space for bending - Flat front covers - Block hydraulic system - Electronic pressure gauge - Measuring system with glass scale and spring-back compensation - Hydraulic oil in machine (lifetime lubrication) - Oil cooler - Electrical cabinet cooling via air-to-air heat exchanger - Modern machine design Backgauge System - 2-axis backgauge system, X and R axes Tool Clamping - Hydraulic upper tool clamping - Lower tool holder, hydraulic clamping, hardened - Lower tool displacement, 2 positions, pneumatic Crowning - CNC crowning Control - TRUMPF TASC 6000 - Graphical workshop programming - Windows XPe (embedded), Pentium 4 with 2.8 GHz clock speed - 2 GB RAM - 15-inch touch screen - Network capability - Teleservice via internet Operation - Control panel with LCD keypad and foot switch - Communication rail - MobilControl Safety - Standard safety equipment - CE marking

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, control type: CNC control, actuation type: electric, controller model: System 6000, working width: 3,200 mm, type of crowning: CNC-controlled, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, back gauge: 3,000 mm, Equipment: CE marking, emergency stop, Used Ras Flexibend 73.30 Cnc Folding Machine For Sale with 3metre back gauge Motorized Swivel Bending Machine Make: RAS Model: Flexibend 73.30 Year of Manufacture: 2003 Technical Specifications Manufacturer: RAS Model: 73.30 Year: 2003 Useful bending length: 3200 mm Sheet thickness: 3.0 mm Upper beam opening width: 300 mm CNC adjustable bending beam travel, max.: 80 mm CNC adjustable lower beam travel, max.: 80 mm Speeds: Bending beam, max.: 90 degrees/sec Dcjdjw T Sc Aepfx Ak Ajp Upper beam, max.: 40 mm/sec Back gauge 10–1550 mm: 2 sec Equipment • Control: Touch & More System 6000 - NEW TOUCH SCREEN FITTED • CNC-controlled back gauge, 3metre J version / J shape back gauge • Motorized lower beam adjustment and bending beam adjustment • Support table A good selection of tooling, segmented and full length

Condition: new, Year of construction: 2025, load capacity: 1,300 kg, lifting height: 2,900 mm, free lift: 1,450 mm, fuel type: electric, mast type: duplex, construction height: 1,930 mm, power: 0.65 kW (0.88 HP), battery capacity: 106 Ah, fork length: 1,150 mm, fork width: 180 mm, fork thickness: 60 mm, front tire type: polyurethane tires (black), rear tire type: polyurethane tires (black), overall weight: 585 kg, total height: 1,930 mm, total length: 1,710 mm, total width: 800 mm, color: red, SCHORR ELECTRIC HIGH-LIFT PALLET TRUCK 1300KG, LIFTING HEIGHT OF 2900MM WITH FREE LIFT CALL US: 004959238968945 The SCHORR electric high-lift pallet truck makes it easy to transport heavy loads weighing up to 1300kg. It offers a maximum lifting height of 2900mm. The forks have a standard length of 1150mm, making them ideal for both one-way and Euro pallets. Thanks to the free lift function, the mast only extends above the initial carriage height (free lift of 1.45m) – perfect for warehouses and areas with low ceiling or passage heights. Dcsdpfx Asyfdbbsk Aep Both model variants fit through a standard doorway, as the overall height/mast height is under 2m. With the electric SCHORR high-lift pallet truck, you can now stack pallets efficiently and ergonomically. Even longer distances can be covered with ease. Its practical duplex mast design ensures the stacker fits into any truck or container. CALL US: 004959238968945 FURTHER ADVANTAGES OF THE SCHORR ELECTRIC HIGH-LIFT PALLET TRUCK: - Duplex mast - Electric steering - Free lift function TECHNICAL SPECIFICATIONS - Manufacturer (Abbreviation): SCHORR - Manufacturer’s model code: RR13HHE5F - Rated capacity: 1.3t - Model: 290E - Weight including batteries: 585kg - Drive: Electric - Tyres: Polyurethane Basic dimensions - Overall length: 1710mm - Overall width: 800mm - Length including fork shank: 560mm - Lift height: 2900mm - Free lift: 1450mm - Mast height retracted: 1930mm - Mast height extended: 3290mm - Fork dimensions (DIN ISO 2331): 60mm x 180mm x 1150mm - Outside fork width: 570mm - Aisle width with 800x1200 pallet lengthwise: 2133mm - Turning radius: 1300mm Performance - Travel speed with/without load: 4.2km/h / 4.5km/h - Lift speed with/without load: 0.1m/s / 0.14m/s - Lowering speed with/without load: 0.13m/s / 0.11m/s *Additional technical data available on request. CALL US: 004959238968945 Our knowledgeable team is happy to answer any questions about the SCHORR electric high-lift pallet truck with free lift, 1300kg, 2.9m. We are available by phone at 05923/8968945 or by email. We look forward to hearing from you and assisting with professional advice. Are the acquisition costs for a high-lift pallet truck too high for you? No problem, we offer leasing as an attractive financing option. For questions about our leasing offers, please contact us by phone at 05923/8968945.

Condition: excellent (used), functionality: fully functional, Year of construction: 1996, Used very clean, well maintained Trumpf V 85S series hydraulic down stroke cnc pressbrake with a large amount of tooling for sale Trumpf v85s 2.5 metre x 85ton – 4axis cnc pressbrake in good condition Make: Trumpf Model: Trumabend v85s Year: 1996 Max. pressing force: 850 kn / 85ton Max. stroke: 215mm Brake time: 86ms Dedpfx Aker Hcl Ae Aecp Total axis: 2axis back gauge / total axis 4 – y1 y2 x r and i axis Large amount of upper and lower Trumpf tooling, some tooling is brand new Complete with: • 2 axis back gauge • i axis – bottom base moves to use twin multi v without operator moving or changing the tooling • Fully serviced / Good condition

Condition: used, Year of construction: 2002, machine/vehicle number: 0102-260042, Kaltenbach KBS 920 DG – Mitered Band Saw with Conveyor System The Kaltenbach KBS 920 DG is a robust double-mitered band saw designed for the precise and cost-effective processing of large steel sections in the steel construction and steel trading industries. The machine was completely overhauled in 2018 and is in very good condition. Thanks to its sturdy industrial design, hydraulic material clamping, and continuously adjustable band saw speed, it is particularly well-suited for demanding sawing operations on heavy steel sections. The system includes a comprehensive material transport system with roller conveyors, cross conveyors, and a pushing measuring carriage. This combination enables efficient material feeding, precise length positioning, and optimized material flow. The band saw is designed for material lengths of 15 m. The system can be extended or shortened at any time by Nenok technicians. Technical Specifications KBS 920 DG Machine Type: Double-mitre band saw General overhaul in 2018, including new CNC control system Cutting range at 90°: Round 500 mm, square 920 × 500 mm Cutting range at +/- 60°: 820 × 500 mm Cutting range at +/- 45°: 670 × 500 mm Cutting range at +30°: 480 × 500 mm Saw blade dimensions: 7,290 × 41 × 1.3 mm Saw blade speed: Continuously adjustable Drive power: 7.5 kW Dodpfj Agb A Dox Ak Ajcp Cutting speed: 15–120 m/min Saw feed: Hydraulic, 0–300 mm/min Material clamping: Hydraulic Material transport: Roller conveyors and cross conveyors Length positioning: Sliding measuring carriage Saw weight (machine only): 3,650 kg Working height: 640 mm Machine condition: Very good The Kaltenbach KBS 920 DG is a cost-effective solution for steel construction companies and steel distributors who want to precisely cut large and heavy steel sections and streamline their material processing with an integrated transport system.

Condition: excellent (used), CATALOGUE NUMBER 7613 Technical data: - inlet width 650mm - inlet height 300mm Dcedps Af In Uefx Ak Aop - shaft width 660mm - blade length 660mm - number of blades 2 pcs - screen dimensions 90x100mm - 2 toothed pull shafts from below - lower shaft motor 3kW - 2 toothed pull shafts from above - upper shaft motor 3kW - belt conveyor - belt conveyor length 2700mm - belt conveyor width 630mm - main motor 75kW - auto-reverse - reverse gear - overall dimensions (L/W/H) 5350x1300x1300mm - weight 4200kg ADVANTAGES – Made in Italy – Auto-reverse (adjustable) – Reverse gear – Used shredder, very good condition Net price: 149900 PLN Net price: 34860 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7817 TECHNICAL DATA DDCA - Double-sided profiling machine - length of the profile 180 – 850mm - width of the profile 30 – 75mm - thickness of the profile 10 – 45mm - spindle diameter 30mm - max. disc diameter 250mm - 4 discs in a set 5 spindles: left side: - 1) vertical upper 2.2kW - 2) horizontal lower 2.2kW right side: - 1) vertical lower 2.2kW - 2) vertical upper 2.2kW - 3) horizontal lower 2.2kW - spindles adjustable up/down, left/right - 2 material clamping devices - stepless feed rate adjustment 0-10m/min - central lubrication via oil pump - pump motor 2.2kW - diameter of the dust extraction nozzle 5x100mm - dimensions L/W/H 1900x2230x1530mm DDGA - Four-sided planing machine - width of the workpiece 35 – 130mm - thickness of the workpiece 10-60mm - min. length of the workpiece 200mm spindle arrangement: - 1) lower 5.5kW - 2) right 5.5kW Djdo Af I Iqjpfx Ak Aocp - 3) left 5.5kW - 4) upper 5.5kW - spindles adjustable up/down - upper and lower spindle diameter 40mm - right and left spindle diameter 30mm - 4 feed rates 13/20/26/40 - central lubrication of the chain via oil pump - diameter of the dust extraction nozzle 4x120mm - dimensions L/W/H 3200x1370x1830mm DBCA - Profiling machine feeder - max. feed rate 40m/min - max. width of the profile 150mm - motor 0.55kW - overall dimensions L/W/H 2320x600x1150 DBGA - Moulding machine feeder - length of the mouldings 200-600mm - width of the mouldings 30-20mm - thickness of the mouldings 10-40mm - stepless feed rate adjustment 10-40m/min - motor 0.75kW - overall dimensions L/W/H 1500x500x980mm - total weight approximately 4900kg Net price: 63900 PLN Net price: 14860EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to higher fluctuations) * MAR-MASZ guarantees the quality of your purchase, but is not an authorized representative of the manufacturer. All trademarks and names are used for informational purposes only, to identify the product. We only resell goods that the manufacturer has previously introduced to the market. We have no business relationship with the manufacturer.

Condition: excellent (used), CATALOGUE NUMBER 8006 TECHNICAL DATA Dedpfx Ako Af I D Ae Ajcp - max diameter of the main saw blade with scoring saw: 350mm - max diameter of the main saw blade without scoring saw: 450mm - cutting height with a 350mm blade installed: 100mm - electric adjustment of the main saw blade (up/down) + angle - electric angle display - electric adjustment of the scoring saw (up/down, left/right) - spindle diameter: 30mm - spindle locking - with a rip fence carriage - cutting length on the carriage: 3400mm - cutting width with fence: 1300mm - with a side carriage - with a scoring saw - max diameter of the scoring saw: 120mm - spindle diameter: 22mm - scoring saw motor: 0.75kW - main motor: 5.5kW - 4 types of rotation speeds - electronic speed display - diameter of the dust extraction port: 120mm, 80mm - table dimensions: 1220x730mm - table dimension with extension: 1440mm - table dimension with extension: 2060mm - blade guard - dimensions (L/W/H): 3550x3400x1500mm - weight: 1140kg ADVANTAGES - electric adjustment of the saw blade and scoring saw - with original fence - carriage length: 3400mm - German-made - unpainted - used saw, very good condition Net price: 38900 PLN Net price: 9047 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to fluctuations in the exchange rate)

Condition: excellent (used), CATALOGUE NUMBER 7133 TECHNICAL DATA - max. width of workpiece: 220mm - max. height of workpiece: 120mm – 5 spindles: 1) horizontal lower 220mm, 5.5kW 2) vertical right 120mm 3) vertical left 120mm; 2 and 3, 11kW 4) horizontal upper 220mm, 11kW 5) horizontal lower 220mm, 5.5kW - all spindles adjustable up/down, left/right - spindle diameter 40mm - pneumatic pressure pads - from above: 4 infeed rollers, toothed, including 2 double rollers - from above: 1 double outfeed roller, smooth, rubber - from below: outfeed roller, rubber - feed on Cardan shafts - feed speed adjustment - feed motor 2.2kW - lifting motor 0.25kW - electric adjustment of planing thickness - length of infeed table 1970mm - central lubrication - diameter of dust extraction nozzle 4x120mm, 140mm - dimensions (L/W/H) 3500x1550x1400mm - weight 1750kg ADVANTAGES – with 5 heads – German-made – unpainted – used planer, very good condition Net price: 39900 PLN Net price: 9280 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to higher fluctuations) Dcjdpfx Ako Af Uy Se Asp

Condition: excellent (used), Year of construction: 2006, operating hours: 7,562 h, turning length: 515 mm, turning diameter: 366 mm, travel distance X-axis: 260 mm, travel distance Z-axis: 590 mm, rotational speed (max.): 6,000 rpm, total height: 2,120 mm, total length: 2,705 mm, total width: 2,000 mm, overall weight: 5,500 kg, CNC controller: Mitsubishi M-720BM (MAPPS 2) Capacity X-axis travel mm: 260 Z-axis travel mm: 590 B-axis travel mm: 624 Turning length mm: 515 Max. turning diameter mm: ø: 366 Swing over bed mm: ø: 923.8 Swing over cross-slide mm: 755 Bar work capacity mm: 52 Upper turret Number of tool slots St .: 16 Speed driven tools RPM: 6.000 Drive power driven tools kW: 5.5/5.5/3.7 (3min/5min/cont) Indexing time s: 0.25 Main spindle Speed spindle rpm: 6.000 Drive power spindle kW: 11/7.5 Spindle bore mm: 61 Chuck type: Hollow Chuck (6") Manufacturer: KITAGAWA Spindle nose: JIS A2-5 Counter spindle Speed spindle rpm: 6.000 Dcodpfx Asu T H Dxjk Ajp Drive power spindle kW: 11/7.5 Spindle bore mm: 43 Chuck type: Hollow Chuck (6") Manufacturer: KITAGAWA Coolant system Tank capacity liter: 235 Equipment Chip conveyor Signal lamp High pressure pump Chuck foot switch (double) for main and counter spindle Interface for Bar feeder Bar loader IEMCA MASTER 880/MP 33 LL Working time hours Potencial nominal kVA: 27.4 Basic machine dimensions / weight Length mm: 2.705 Width mm: 2.000 Height mm: 2.120 Weight kg: 5.500

Condition: refurbished (used), Year of construction: 2017, operating hours: 6,487 h, load capacity: 2,000 kg, lifting height: 4,800 mm, load center: 500 mm, fuel type: electric, mast type: triplex, construction height: 2,172 mm, battery voltage: 48 V, fork length: 1,200 mm, empty load weight: 2,710 kg, Equipment: cabin, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONALS IN ACTION. Our forklifts are technically refurbished according to FEM-4.004 and current safety standards – ensuring top quality and your safety. From the chassis to the battery, including drive system, brakes, steering, and electrics – every vehicle is thoroughly inspected and reconditioned. ? Made in Germany – with responsibility and precision ? Strict technical inspection ? 400+ vehicles available ? Worldwide shipping & customs clearance ? Service & spare parts at fair prices ? Personal support – even after purchase Test and get advice on site now – we will find the right solution for you. Industrial Truck Data: Manufacturer: Jungheinrich Model: Counterbalance Forklift EFG 220 Drive type: Electric Load capacity: 2,000 kg Year of manufacture: 2017 Operating hours: 6,487 Lift height: 4,800 mm Mast type: Triplex Full free lift: Yes Overall height: 2,172 mm Fork length: 1,200 mm Unladen weight: 2,710 kg Load center: 500 mm Tyres: Solid rubber Model designation: EFG 220 Battery type: PzS Voltage: 48 V Battery weight: 1,013 kg Cabin type: Partial cabin – front, roof & rear window Cabin features: Solopilot control system Dcsdpfx Aey Rqt Nok Aep Lighting: 2x front work lights Lighting: 2x rear work lights Lighting: Rotating beacon Attachments: Side shifter Attachments: Additional hydraulic circuit – routed to fork carriage

Condition: used, TORNOS MULTIDECO 20/6b is a CNC Multi-spindle turning lathe engineered for high-precision machining with excellent accuracy and reliability. Key capacities: 17 axes total, 6 cross slides, 5 plain turning slides, longitudinal carriage way 160 mm, 6 spindles + 1 back spindle, round bar capacity Ø 5–20 mm, max workpiece length 100 mm, production rate 45 pcs/min. Technical specs: stepless spindle speeds up to 5000 rpm, spindle power 15 kW, total installed power 43 kVA, supply 3x 400 V 50 Hz, machine weight ≈8500 kg, dimensions L3500×W1600×H1950 mm. Equipment: ROBOBAR bar feeder type MSF 522/6, coolant system, chip conveyor, pick-up spindle, spindle stop device, lamp and status light. Delivers tight tolerances; suitable for automotive, watchmaking, toolmaking, aerospace and medical industries. Dcedpfx Aeyxny Ajk Asp

Condition: used, NZX 1500/800SY is a CNC Turning-Milling-Drilling Center with high precision, accuracy and reliability. Capacities: 2 turning spindles, 2 revolvers, swing diameter over bed 800 mm, max. turning Ø 320 mm, max. bar Ø 52 mm; travels Z 810 mm, X 210 mm, Y 110 mm (both carriages). Specs: spindle speeds 0–6000 t/min, spindle power 22/18.5 kW, driven tools power 7.5/5.5 kW, spindle nose JIS A2-5, spindle hole 61 mm; rapid traverse X 30 m/min, Z 50 m/min, Y 20 m/min; weight ~8100 kg; overall dims L4396×W2835×H2320 mm. Accessories: direct measuring system X axis, lamp, coolant system, coolant through counter spindle, loader interface, parts catcher, workpiece conveyor, chip conveyor. Delivers tight tolerances; typical applications: automotive, aerospace, medical, watchmaking and machine tools. Dcedpfoyxn I Hsx Ak Asp

Condition: used, Year of construction: 2011, pressure: 400bending length: 4050column width: 3400electric current: 37,5 KWweight approx.: 25.000messurements (LxWxH): 5750 x 2110 x 3440STOCK CLEARANCE – UNBELIEVABLE PRICE! CNC Press Brake – DURMA AD-S 40400 (4 m x 400 tons)(Original price approx. EUR 170,000) Technical Specifications:Manufacturer: DURMA Model: AD-S 40400 Year of manufacture: 2011 Bending length: 4,050 mm Pressing force: 400 tons Axes: Y1, Y2, X, R + CNC-controlled crowning Motor power: 37 kW Features & Equipment:CNC crowning system, motorized adjustment via control Upper tool: 1010/A/75°, segmented and gooseneck-style Die: Multi-V die Backgauge: CNC-controlled 2 front sheet supports on linear guides CE-certified laser safety system (Lasersafe) mounted on the upper beam Machine fully complies with CE standards new pumpt installed Djdjv Rtg Tjpfx Ak Aocp The machine is being sold in its current condition. The machine was purchased from an insolvency sale and transported to our warehouse. The basic up and down functions have been tested and are working. Apart from that, we have no further information regarding the technical condition or overall functionality of the machine. An on-site inspection can be arranged upon request. The machine is sold as is, without any warranty or guarantee. One-time offer – available immediately!Only 1 unit in stock – ready for fast delivery – no lead time!Take advantage of this rare opportunity to own a high-performance CNC press brake at a fraction of the original price.