Used Various for sale (6,482)

Condition: used, Water pump with 4 cylinder Maguirus Deutz engine - = Further information = Nedjxizbljpfx Akqodc New: No Please contact Miguel Cubas for more information. = Company information = We are located between Antwerp and Brussels along the A12 motorway, nearby the port of Antwerp. Opening hours: Monday till Friday continuously from 8.30 am to 19.00 pm.

Condition: used, No. 10019 Various conveyor belts Used Consisting of 6 positions Pos. 1: Blue conveyor belt, approx. 8000 x 800 mm LW, was used for waste Pos. 2: Orange conveyor belt, approx. 12000 x 1200 mm LW, as good as new Pos. 4: Two blue mobile conveyor belts, each approx. 10000 x 800 mm LW Pos. 5: Two turquoise conveyor belts, 1st belt approx. 10000 x 1600 mm LW, 2nd belt approx. 4500 x 1400 mm LW, very solid - with sheet metal floor, new motor and gearbox required Pos. 6: Blue Westeria conveyor belt, approx. 14000 x 1200 mm LW Pos. 8: Green mobile Z conveyor belt, approx. 7000 x 500 mm LW, new belt, as good as new Sale on behalf of customer, ex location near 85456 Wartenberg, without dismantling, without transport and assembly Errors in description and price excepted Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Ndsdswhp H Nopfx Akqsc Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: ready for operation (used), Ring Heating Bands, Part 1 Quantity Diameter x Width Voltage Power Number of Halves Sensor 1 250 x 200 mm 230 V 2300 W x 2 2 2 1 250 x 260 mm 230 V 2400 W x 2 2 2 1 250 x 200 mm 230 V 2400 W x 2 2 2 1 150 x 100 mm 230 V 1200 W 1 1 1 140 x 90 mm 230 V 1000 W 1 1 1 140 x 90 mm 230 V 800 W 1 1 1 140 x 80 mm 230 V 1000 W 1 1 2 140 x 60 mm 230 V 650 W 1 1 1 130 x 110 mm 230 V 1000 W 1 1 2 90 x 65 mm 230 V 550 W 1 1 5 250 x 260 mm 3 x 400 V 2400 W x 2 2 2 2 250 x 200 mm 3 x 400 V 2400 W x 2 2 2 1 240 x 275 mm 3 x 400 V 4500 W 1 1 2 220 x 230 mm 3 x 400 V 4000 W 1 1 1 170 x 155 mm 3 x 400 V 1100 W x 2 2 2 1 150 x 155 mm 3 x 400 V 900 W x 2 2 2 Ndedpfx Akswh Sxzjqoc 1 80 x 320 mm 3 x 400 V 1500 W 1 1

Condition: used, Various second-hand milling spindles or planing spindles for Weinig / SCM / etc. in stock Nsdezrxraopfx Akqsdc For Weinig: Unimat, Profimat, Unicontrol, and many more For SCM: Profiiset, Sintex, Topset, and many more Please send us an enquiry with the required dimensions.

Condition: used, TECHNICAL DETAILS - Max. heating bath temperature : 99.9 [°C] Nsdju D I Hxepfx Akqodc - Heating bath model : water/liquid bath - Heating bath volume : 14 [l] - Cooling : No

Condition: used, TECHNICAL DETAILS - Max. heating bath temperature : 99.9 [°C] - Heating bath model : water/liquid bath Ndodpfx Aksu D I H Ejqjc - Heating bath volume : 14 [l] - Cooling : No

Condition: used, TECHNICAL DETAILS Ndodpfx Aeu D I H Sskqec - Volume : 4.3 [l] - Timer : 0-120 [min] - Temperature setting : 0-100 [°C]

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 349029, overall weight: 2,010 kg, noise level: 69 dB, Equipment: type plate available, Voltage: 400V Phase: 3 Frequency: 50 Hz Flow rate: 14.72 m³/min Speed: 3000 min⁻¹ Intake pressure: 1 bar Installed motor power: 75 kW Compression medium: Air Stage pressure: 7.5 bar g Full load current: 169 A Nodpfx Akowrrn Dsqsdc The CompAir screw compressor L80-7.5A is a reliable and efficient solution for compressed air supply in various industrial applications. With its robust design and modern technology, this model ensures stable and continuous compressed air supply that meets the high requirements for performance and reliability. The compressor is characterized by its easy operation, low energy consumption, and minimal maintenance, making it an economical choice.

Condition: ready for operation (used), Year of construction: 2006, operating hours: 42,200 h, travel distance X-axis: 180 mm, travel distance Z-axis: 335 mm, number of axes: 4, This 4-axis Okuma LB200-MW was manufactured in 2006. It features a tool turret with 12 positions and driven tools, providing versatility for various machining tasks. The machine has a spindle bore of approximately 42 mm and includes optional equipment such as a chip conveyor and coolant tray. If you are looking to get high-quality turning capabilities, consider the Okuma LB200-MW horizontal turning machine we have for sale. Contact us for further details. Counter spindle is non-functional- Power ON Time: 99,999:59:59 - NC Running Time: 80,472:53:12 - Spindle Rotation Time: 62,302:15:19 - Operating/Main Time: 42,200:15:31 - Spindle Bore (Passage): Approx. 42 mm - Tool Turret: 1 Disc Turret with VDI 30, 12 positions - Nominal Voltage: 400 V - Phase Count: 3 Phase - Frequency: 50 Hz - Max Power Consumption: 17 kVA - Total Current Consumption: 24.6 A - Max Motor Current Consumption: 40 A - Current Interruption At: 10 kA Included: - 3m FMB Turbo 5-42 Bar Loading Magazine (YOM: 2007, with steady rest / Lünette and 1x loader kit) - Chip Conveyor - Coolant Tray - Operating Manual - Main Spindle Chuck without collets - Counter Spindle Chuck without collets Optional (not included) :Various Basic Tool Holders (by agreement) Technical Specification Ndsdpfxj Ad Ikao Akqec Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2006, operating hours: 14,346 h, laser power: 5,000 W, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 115 mm, number of axes: 3, This 3-axis TRUMPF TruLaser450 was manufactured in 2006. It features a working area of 4000 x 2000 x 115 mm and a powerful 5000 W CO2 laser. The machine includes advanced automation with an automatic pallet changer and various cutting heads for high-speed and thick sheet cutting. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TruLaser450 CO2 laser cutting machine we have for sale. Contact us for further details. Nsdpfxj Abm Ace Akqodc - Laser Unit: CO2 laser TLF 5000 (high-frequency excited) - Electrical Connection / Mains: 400 V / 50 Hz - Connected Load: 105 kVA - Control Voltage: 24 V DC - Required Fusing: 3x 160 A - Compressed Air Connection: 7–70 bar - Nitrogen Connection: 30 bar - Oxygen Connection: 20 bar - Control System: Sinumerik 840D (PC-based open control system)

Condition: good (used), Various cooking equipment is for sale. More detailed information and pricing are available upon request. Please also specify in your inquiry which products you are particularly interested in. Available: 1 material hopper 4 drying ovens 25 separators 1 Koch CKT 500 dryer and several other products from other manufacturers such as Digicolor or Colortronic. See pictures. Nodpfekzkz Rox Akqjdc Prices exclude VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you further. Trade-in or exchange possible! Machine buying and selling BUYING / SELLING PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality but affordable metalworking machine for your production? Or would you like to sell yours? For more information or to contact us, please visit our website.

Condition: used, Year of construction: 1989, 3 St. 110 mm Weight 30 kg Used Machine Year of Manufacture: 1989 Features and Technical Specifications: - Type 76 feed unit for table saws and panel saws of various makes Ndjdpfx Akezr Rqzjqec - For safe cutting of solid wood strips, planks, window stiles, etc. - With adjustable mounting profile, 3 feed rollers, and 2 fixed speeds - Quick adjustment to workpiece height via a handwheel - With dust extraction connection for dust-free operation, including plug - With rail for mounting heights from 18 to 40 mm - Quick and easy (tool-free) installation and removal - Transparent, swing-away guard for optimal visibility and ergonomic operation when cutting moldings - Supply voltage: 400 V / 50 Hz - Weight: approx. 30 kg

Condition: excellent (used), Complete line direct from Bankrupt company which was filling capsules and tablets into small tubs. Bottlea are loaded into the line from lazy susan, product is counted and doses into the tub or bottle which is then foil sealed before the screw lid is applied. All machines were bought new in 2015 and appear to be in excellent condition. The counter is a Vitacount 12-1 Ndsdpfxow Hz T Eo Akqjc

Condition: used, Year of construction: 2012, Collating Towers, Horizon VAC-1000a/m/m/c, 40 Stations Key Features - Number of Stations: 40 - Suction and Air-Blow System: VAC-1000 uses the patented rotating vacuum feed system with air-blow support to ensure reliable paper feeding with various paper qualities. - PJ-77R - ST-40 Specifications - Maximum Sheet Size: 350 x 500 mm Ndsdpfx As Ad Akzekqsc - Minimum Sheet Size: 148 x 120 mm - Loading Capacity: 55 mm per station - Weight: 310 kg per tower - Power Supply: 230 V, 2.3 kW

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: A34902974, Equipment: type plate available, Technical details: Nsdpfx Aewrq Icekqjdc Voltage: 400V Phase: 3 Frequency: 50 Hz Volume flow: 12.44 m3/min Speed: 3000 rpm Intake pressure: 1 bar Installed motor power: 75 kW Compression medium: Air Stage pressure: 10 bar g Full load current: 174.3 A The CompAir screw compressor L75-10A is a powerful and reliable solution for generating compressed air in industrial applications. With its robust design and modern technology, this compressor ensures stable and efficient compressed air supply that meets the high demands of various operations. Thanks to its compact design, the L75-10A can be easily integrated into a wide range of systems and provides long-lasting, reliable performance.

Condition: new, We offer roll-off containers / landscaping containers with a drive-over and spring-loaded rear door, a hydraulic drop gate, and a hydraulic French door, all in a spar-free design, available upon request. Delivery throughout Europe! Suitable for transporting heavy bulk goods and construction machinery. Ndedpfx Ajzhpklekqjc The only landscaping container with a clear / usable floor width of 235cm! ⚠️ Unfortunately, many dealers advertise with the Hardox brand name but do not use Hardox! We use exclusively "original" HARDOX® from the manufacturer SSAB! Our containers have a sticker with a QR scan code. You can use the number to check the "authenticity" of our products!!!! --- FINANCING --- LEASE PURCHASE --- LEASING --- -possible, please contact us!- Standard version in HARDOX HB450 Dimensions: 4.5 - 7.0m x 2.35 x 0.8m 4.5 - 7.0m x 2.35 x 0.95m 4.5 - 7.0m x 2.35 x 1.05m 4.5 - 7.0m x 2.35 x 1.15m 4.5 - 7.0m x 2.35 x 1.25m 4.5 - 7.0m x 2.35 x 1.35m 4.5 - 7.0m x 2.35 x 1.40m Suitable for systems according to DIN 30722-1 / 2 Tested and approved according to DGUV rule 214-017 Lifting bracket Ø 50 mm Hook height 1,570 mm DIN 30722-1 up to 15,000 kg GVW Material thicknesses "HARDOX HB450" Floor: 5mm Walls: 3, 4 or 5mm Cross member: INP 180 Or DIN 30722-2 up to 22,000 kg GVW -Rear door drive-over with spring relief -End wall raised / cab protection or alternatively flat -Closing profile made of square tubing -All-around tarpaulin and net hooks -Primed once on the inside, double coated on the outside -Double coated on the outside in a single color, RAL color of your choice Optionally available: -Standard wing doors -hydraulic rear door with wing doors -Drop gate, hydraulic or pneumatic mounted with piano hinge -Removable hinged flap "in the upper area" -Tie-down eyes in the floor -Roll tarp -Marcolin covering, manual or electric -Netting system for covering / load securing -Grain slide

Condition: used, Year of construction: 2017, operating hours: 3,928 h, overall weight: 434 kg, load capacity: 12 kg, arm reach: 1,850 mm, This is a used, tested industrial robot ABB IRB 2600-12/1.85 from year of manufacture 2017 with IRC5 Single controller. The system is designed for industrial automation applications and is typically used in areas such as handling, assembly, and trajectory applications. The robot features a payload capacity of 12 kg, a reach of 1850 mm, and a total of 3928 operating hours. The unit comes equipped with various software options including DeviceNet, PROFIBUS, World Zones, Path Recovery, and Collision Detection. Nedpfoy Nfktex Akqedc

Condition: good (used), Year of construction: 1993, Sheet metal storage system, Stopa, 491 storage locations for sheet metal 1.30 x 2.50m and 1.50m x 3m, – used: Price ex works: €65,000 (net), plus dismantling, etc. Manufacturer: Stopa Type: SLBS 3000 UL (Serial No. 93449) Year of manufacture: 1993 / Modifications in 2013 (Retrofit) and 2019 Storage height: 6,400mm Width (without attachments): Overall: 5.26m, Front: 5.17m Length: approx. 60m Sheet metal format Front: 1,300 x 2,500mm Sheet metal format Overall: 1,500 x 3,000mm Load capacity per pallet: 3,000kg Storage locations Front: 359 Storage locations Overall: 132 No existing cassettes: to be clarified 35 towers / bays Storage capacity: 1,473t Over the years, various punching/laser cutting machines have been connected to this storage system, i.e. machines with an interface to the storage system. Manual bending presses and deburring/grinding machines do not have an interface to the storage system. The loading and unloading stations are controlled via the storage management system and moved manually from the storage location to the desired position. 2013 > Retrofit modification: 4.1 Key aspects of this modification: 4.1.2 New main control panel with control computer 4.1.3 Data transmission to the stacker crane (RGB) via data light barrier 4.1.4 Lifting mechanism with two new Profi-Bus rotary encoders for height positioning, which monitor each other. 4.1.5 Encoder of the traverse for the telescopic fork was replaced with a Profibus-compatible rotary encoder 4.1.6 Control cabinet of the RGB was completely renewed 4.1.7 New circuit diagrams for the RGB and the I/O modules were created. 4.1.8 The safety technology was not changed 4.1.9 The speed of the axes (longitudinal travel, lifting mechanism, fork) was not changed. 4.1.10 The drives on the RGB and the controllers in the stationary RGB cabinet were converted to asynchronous servo motors with frequency converters. 5) 2015 > Connection of Trumpf L3030 to our distribution line 2 5.1.1 Key aspects of this modification: 5.1.2 Modification of station 4 and 6, loading and unloading side was swapped 5.1.3 Modification of safety interfaces of station 4 and 6 from 1 to 2-channel 5.1.4 Trumpf L3030 LiftMaster connection 6) 2017 > Order for Retrofit expansion concept, stage 1-3 6.1 Key aspects of expansion stages 1-3 (implemented by 08.2018) 6.1.2 Stage 1: Connection of the new TruLaser 3030 Loadmaster to VT 1 with modification of loading and unloading station 3 (Overall and Front) 6.1.3 Stage 2: Modification of the steel structure blocks from Front to Overall (28, 30, 32, 34, 36), relocation of stations 19 and 20 including update of the station control from Siemens S5 to S7 including 56 flat pallets Overall 6.1.4 Stage 3: Update of the station controls to Siemens S7 without VT1 and VT2 Njdpoz Tdywsfx Akqedc 7) 2018 > Order for Retrofit expansion concept, stage 4-5 7.1 Key aspects of expansion stages 4-5 (planned implementation April – June 2019) 7.1.1 Stage 4: 7.1.2 Dismantling of the STOPA storage SBLS tower 1 and tower 2 (in-house work) 7.1.3 Modification of distribution line 1 and 2 7.1.4 New distribution trolley 1 7.1.5 New control for distribution line 1 and 2 7.1.6 Stage 5: 7.1.7 New storage management software STOPA WMS 4.0 DYNAMIC The modification of expansion stages 4 – 5 will be carried out without any significant changes to the system and on the basis of the updated safety measures. Condition: good Available: immediately Location: Germany, NRW PDF plan available – we will gladly send it upon request!

Condition: good (used), Machinery from honey processing factory. DC Norris hotrooms, DC Norris settling tanks, DC Norris holding tanks, crystallised tanks, super seed tanks, pump, filter sets, various filling lines to fill squeezy bottles, glass jars and plastic buckets. Nedpfopcibmox Akqjdc

Condition: ready for operation (used), Year of construction: 2006, pressing force: 102 t, This 4-axis Durma ADS 25100 was manufactured in 2006. It features a press force of 100 tons and a length of 2500 mm, making it suitable for various bending applications. If you are looking to get high-quality bending capabilities, consider the Durma ADS 25100 press brake we have for sale. Contact us for further details. Technical Specification Nsdpfe Adrvasx Akqedc Bending Length 2500 mm

Condition: new, functionality: fully functional, This advertisement is for informational purposes only and does not constitute a legally binding offer. Diesel Generators KINGWAY We offer new, high-quality KINGWAY diesel generators (Baudouin engine / Leroy-Somer generator) – ideal for construction, agriculture, industrial applications, and backup power supply. CE-compliant, robust, and reliable. ✅ Generator ATM 20 Price: €7,375 net €8,776.25 gross • Maximum Output ESP: 22.0 kVA / 18.0 kW • Rated Output PRP: 20.0 kVA / 16.0 kW • Voltage: 230/400 V | Frequency: 50 Hz • Fuel: Diesel | Tank: 160 l • Consumption: 2.8 / 3.8 / 5.2 l/h (50/75/100%) • Weight (without fuel): 905 kg • Dimensions (L×W×H): 192 × 1000 × 1420 mm ✅ Generator ATM 60 Price: €11,165 net €13,286.35 gross • Maximum Output ESP: 66.0 kVA / 53.0 kW • Rated Output PRP: 60.0 kVA / 48.0 kW • Voltage: 230/400 V | Frequency: 50 Hz • Fuel: Diesel | Tank: 260 l • Consumption: 7.6 / 11.2 / 15.1 l/h (50/75/100%) • Weight (without fuel): 1270 kg • Dimensions (L×W×H): 2400 × 1120 × 1650 mm ✅ Generator ATM 100 Price: €13,540 net €16,112.60 gross • Maximum Output ESP: 107.0 kVA / 86.0 kW • Rated Output PRP: 98.0 kVA / 78.0 kW • Rated Current: 141.0 A • Voltage: 230/400 V | Frequency: 50 Hz • Fuel: Diesel | Tank: 255 l • Consumption: 7.7 / 11.1 / 15.0 l/h (50/75/100%) • Weight (without fuel): 1370 kg • Dimensions (L×W×H): 2400 × 1170 × 1670 mm ✅ Generator ATM 150 Price: €16,375 net €19,486.25 gross • Maximum Output ESP: 165.0 kVA / 132.0 kW • Rated Output PRP: 150.0 kVA / 120.0 kW • Rated Current: 217 A • Voltage: 230/400 V | Frequency: 50 Hz • Fuel: Diesel | Tank: 890 l • Consumption: 15.9 / 23.0 / 30.2 l/h (50/75/100%) • Weight (without fuel): 2100 kg • Dimensions (L×W×H): 3310 × 1210 × 2210 mm ✅ Generator ATM 200 Price: €21,355 net €25,412.45 gross • Maximum Output ESP: 220.0 kVA / 176.0 kW • Rated Output PRP: 200.0 kVA / 160.0 kW • Rated Current: 289 A • Voltage: 230/400 V | Frequency: 50 Hz • Fuel: Diesel | Tank: 980 l • Consumption: 22.2 / 32.1 / 43.1 l/h (50/75/100%) • Weight (without fuel): 3300 kg • Dimensions (L×W×H): 3990 × 1540 × 2510 mm Standard Equipment (varies by model): Ndjdpfxeyk Ebyj Akqoc • ComAp IL-AMF25 controller • Brushless generator, digital AVR • Schneider main circuit breaker, engine pre-heater • Anti-vibration mounts, robust frame construction • CE-compliant For further information, technical details and additional options, please visit our website. Location: 84098 Hohenthann Delivery available Contact us by message

Condition: used, Year of construction: 2001, spindle diameter: 40 mm, total width: 2,000 mm, total height: 1,900 mm, total length: 3,800 mm, overall weight: 3,500 kg, input voltage: 400 V, number of spindles: 5, input frequency: 50 Hz, No. 04556 Four-sided planer WEINIG Unimat 23 E Used, year of construction 2001 Spindles (bottom - right - left - top - bottom) All spindles Ø 40 mm, spindle motors with mechanical brake 1. Bottom spindle (surfacing spindle): 5.5 kW, with rebating device 2. Right spindle (jointing spindle): 7.5 kW 3. Left spindle: shared drive with right spindle (7.5 kW) 4. Top spindle: 5.5 kW 5. Bottom spindle: 11 kW Spindle speed 6000 rpm Working range Workpiece width with tool diameter 140 mm: 20 - 230 mm With aluminium planing heads, a working width of 260 mm is possible Workpiece height with tool diameter 163 mm: 8 - 120 mm Infeed table with jointing fence, length 2,000 mm Control and adjustment ATS positioning control with Siemens SIMATIC OP7 operator panel Left spindle: automatic positioning forward - backward Top spindle: automatic positioning up - down Motorised height adjustment of the feed, 1.1 kW adjustment motor with brake Mechanical digital readouts on the spindle adjustments Feed Feed motor 3 kW with brake Feed speed 6 - 36 m/min, infinitely variable via handwheel Serrated feed rollers, driven by cardan shafts Short workpiece package for processing short pieces Top pressure rollers, swing-away Axial adjustment of the feed rollers relative to the left spindle Pneumatic pressure system with pressure reducing unit, 3 pressure regulators with gauges on the control desk Pressure shoes and tables Pressure shoe before top spindle, swing-away Pressure shoe after top spindle with wooden insert Ndsdpfe Afb Eajx Akqoc Table plate with wooden insert at bottom spindle 5 Anti-kickback device on the infeed table Manual Waxilit pump for removing resin from the table Central lubrication points on the front of the machine Safety and noise protection Full soundproof enclosure with viewing window and interior lighting CE marking, BG-tested (wood dust tested) Chip extraction connection diameters 140 mm and 200 mm Power supply 400 V / 50 Hz Scope of delivery 5 planing heads, mounted on the spindles Various spare parts: feed rollers, spacer rings, drive belts, table inserts, operator tools Complete technical documentation Transport dimensions approx. 3800 x 2000 x 1900 mm LWH Weight approx. 3500 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Year of construction: 2015, condition: used, Welding System Manufacturer: TRUMPF Type: TruHeat HF 5010 Year of manufacture: 2015 Technical details: Njdpfx Aezq Hknjkqjdc Input power: 12.5 kVA Power factor: 0.95 Rated power: 10 kW Output current: 560 A (RMS) Output voltage: 1500 V (RMS) Additional information: In our assessment, the machine is in mint condition and can be inspected under power by appointment. - incl. various accessories Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: used, Used beam cambering and straightening machine from BAKKER Capacity: 200 tons Includes several tools ----- Used beam bending machine from BAKKER Capacity: 200 tons Includes various attachments #Stierli-Bieger Nodpfx Aj Aazwfokqodc #Voortman #Busschers #Dynobend

Condition: good (used), Year of construction: 2014, Various storage mezzanines, different widths, heights, lengths, support spacings, and load capacities – used: Ndodpfx Aozqz E Tjkqsc Price per m2 ex works: only €59 (net) including dismantling, packed and loaded! Surcharge for grating as flooring! Manufacturer: Stow Type: Storage mezzanine Year of manufacture: 2014 Load capacity: 250kg / 350kg / 500kg Floor covering: Chipboard, 38mm, top side grey mottled, bottom side white Accessories such as railings, stairs, etc. available upon request Condition: good, an inspection is highly recommended! Available: from approximately Q4/2026 Location: Hamburg