Used Veneer for sale (527)

Condition: excellent (used), We are offering this used Kuper F. WM 630 veneer sewing machine for sale; the year of manufacture is unknown. Manufacturer: KUPER Serial No.: 2906 12339 Pedpfjz Afcyex Adxsrc The advertised price is 800 euros net (negotiable). If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 209070, CASATI BIT 900/2000 veneer cross-cutting machine. Fully functional. Pjdpfsuna E Hex Adxorc

Condition: excellent (used), Year of construction: 1987, I sell the double knife veneer guillotine OMPEC OA 3200/400. Year 1987. Cutting length 3200mm. Pjdpfxoyc I Tvo Adxorc Cutting height 80mm. Cutting width 20-450mm. Very good condition. Available immediately.

Condition: like new (used), Thread splicer with glue Zigzag stitching Heater with air blowing Pedal control 380V power supply Prjdpfx Aezq D I Dsdxoc

Condition: like new (used), Year of construction: 2007, I sell the veneer splicing machine KUPER FLI. Year 2007. Prsdpfjvxvc Hjx Adxec Very good condition. Available immediately.

Condition: good (used), Year of construction: 2003, High-quality veneer saw with planer head for subsequent trimming. Maximum cutting length: 3050 mm. Podpfjzlqbaex Adxjrc Equipped with a rear finger stop.

Condition: used, Year of construction: 2015, functionality: fully functional, Machines connected in one line (all three machines are only sold together): 1. Veneer cross-jointing machine FURNIMASTER FZR-21 2. Direct unloading device DA-12R 3. Scissor lift INCLUDED Veneer specifications Veneer strip length (grain direction) 350 - 2100 mm Veneer strip width (cross grain) 50 - 500 mm Veneer strip thickness 0,3 - 1,5 mm Power data Maximum nominal output / machine cycles 30 cycles/min. Average production speed 17 - 20 cycles/min. Connection data (Basic machine) Connection power 9 kW Compressed air 6 bar Power consumption Electric energy 6,2 kWh Compressed air 15 NL/min. Dimensions and weight (Basic machine) Length 3500 mm Width 1500 mm Predpfx Aey Tpb Rsdxoc Height 1530 mm Working table height 930 mm (+50/-0 mm) Net weight, approx. 2500 kg

Condition: good (used), Year of construction: 1995, Kuper veneer zig-zag splicer machine, type FW/ 1200-E year of manufacture 1995 S/N 3508 3179 Specific features of the KUPER FW 1200 E: high feed speed of 60 m/min. electronically infinitely variable width of zig-zag pattern glue thread cutting device max. veneer thickness : 3,0 mm min. veneer thickness : 0,3 mm glue thread with hot air heating Compressed air Podpfjhbp Ifox Adxsrc discus for transporting the veneer over the veneer table control via foot pedal feed speed : 35-60m / min Volt: 400 V, 50 Hz Total power 1,35 kW working height 915mm weight approx. : 440 kg Dimension : 2,12m x 0,73m x 1,55m

Condition: good (used), Code: 0412 Brand: ORMAMACCHINE Model: NPC/R 35/13 - CE Standard Hydraulic hot press for joinery, furniture, bespoke furnishings, veneering, panels, doors, wooden joinery, composite materials and miscellaneous items – CE Standard Sturdy construction Solid perforated steel platens 3500 x 1300 mm Fixed lower plate – Movable upper plate Plate thickness 80 mm 6 pistons diameter mm 85 Total thrust 120 ton Option for either oil or steam heating Prede Ab T Rtjpfx Adxsc Installed power 8 Kw Overall dimensions mm 4500 x 1550 x 2700 h Weight kg 10000

Condition: excellent (used), Working width: 300 cm Cutting height: 4 cm Pneumatic clamp Pjdezvn Dgepfx Adxjrc 1.8 kW motor

Condition: excellent (used), Year of construction: 1997, I sell the press for veneer and foil ORMA NPC-30 4-40 2500 x 1200. Pjdju E E A Topfx Adxorc Product size max. 2500 x 1200mm Oil heating. Total power 21,7 KW at maximum. Very good condition. Available immediately.

Condition: excellent (used), Veneer saw with automatic feed Pendant control panel with all the operating elements and displays required for machine control Feed speed adjustable Solid and torsion-resistant machine frame Double profile linear guide system for the saw and rabbeting unit Solid pneumatic pressure beam with rack and pinion compensation Saw and rabbeting unit raises and lowers pneumatically Prjdpfjz U I Rcjx Adxsc Cutting and rabbeting height continuously adjustable Rabbeting unit with chip extraction device Front support table, pneumatically adjustable (rabbeting position) Rear support table with width stop, stop depth 15 - 600 mm Width stop with handwheel adjustment and digital dimension display on the control panel Central lubrication point with 14 lubrication points Dust extraction duct Tool holder CE incl. saw blade & router tool Cutting length 3700 mm Cutting width 600 mm Cutting height max. 45 mm Working height 850 mm Motor power - saw 2.2 kW Motor power - router 1.1 kW Compressed air 5 - 6 bar Extraction capacity 815 m3/h (at 20 m/s) Extraction connection 120 mm Weight approx. 1200 kg Space requirement L x W x H approx. 5200 x 1550 x 1600 mm Note on used machines: • Subject to errors in technical data and prior sale. • Indicated prices are ex works, collection only - free loading! • The machine has been cleaned and function-tested. • All machines are sold as seen without any warranty claim. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We only answer inquiries if you provide your address + telephone number!)

Condition: excellent (used), Year of construction: 1992, I sell the double knife veneer guillotine Josting ZFS 2800. Year 1992 / fully reconditioned 2007. Cutting length 2810mm. Cutting height 80mm. Cutting width 20-470mm. Podpfx Aevxli Aedxsrc Very good condition. Available immediately.

Condition: used, Year of construction: 1969, Used Machine Year of manufacture: 1969 Features and technical specifications: - Pressing area: 255 x 135 cm - Pressing force: 100 metric tons - Number of press cylinders: 4 - Cylinder diameter: 100 mm - Opening width: 400 mm - Press plates: gold-anodized ELKOM plates Prodpfxsz Np Ths Adxec - Heating: electric - Heating capacity: 18 kW - Maximum temperature: approx. 120 °C - Weight: approx. 4,500 kg - Safety pull cord will be retrofitted

Condition: used, Year of construction: 1993, Second-hand machine Year of manufacture: 1993 Bench-top machine The zigzag thread used as the adhesive medium is applied from below Automatic thickness and tolerance compensation for measured veneers Veneer from approx. 120 mm in length, 35 mm in width and a thickness of 0.3–2 mm Electrical connection: 230 V Podpfszk N D Rsx Adxorc Column reach 700 mm Material feed rate approx. 6 m/min. Weight approx. 54 kg Availability: at short notice Storage location: Flörsheim

Condition: good (used), Code: 0504 Brand: ORMAMACCHINE Model: NPC 4/40 Prjdpfxe Adqzne Adxjc Hydraulic cold press for panels, furniture, woodworking shops, custom-made furniture, doors, composite materials, aluminum, and various other applications Sturdy structure Platens dimensions mm 2500 x 1200 covered with new aluminum sheets N° 4 pistons Total thrust 40 tons Motor Hp 2 Perimeter emergency cable Overall dimensions mm 3000 x 1450 x 2100 h Weight kg 2200

Condition: ready for operation (used), plate length 3500mm plate width 1300mm water heating 8 hydraulic pistons pistons diameter 85mm plates span 640mm outomatic opening year 1992 Prsdpfx Aszxy N Tsdxec

Condition: good (used), Year of construction: 1979, Veneer Saw FSK Year of manufacture: 1979 Pneumatic 1.8 kW, 380 Volt Cutting length: 3000 mm Cutting height: 40 mm Saw blade: 180 mm Predem Dr Urepfx Adxsc Depth to stop: 500 mm Required space: 4000 x 1200 x 1300 mm Weight: approx. 500 kg Due to the age of the used machine, warranty is excluded for commercial customers upon sale.

Condition: ready for operation (used), Year of construction: 1994, Ott 2513 Stabil Veneer Press 4 cylinders Pressing area 2500 x 1300 mm Electric heating Electric opening and closing Pressing force 90 tons Year of manufacture 1994 Pjdpox Dzvxjfx Adxsrc Price 7,500.-

Condition: good (used), Code: 0478 Brand: ITALPRESSE Model: V/2 Mechanical press for cold gluing Prsdpszz Szaofx Adxec Equipped with a motor that is operated by a switch with automatic return. This switch controls the movements of the mobile platen towards or away from the panels, while the required pressure and the release are controlled by a handwheel, which is on the side of the press. This system allows for maximum pressure with minimum effort Platen dimension mm 2200 x 1000 Opening mm 650 Pressure screw n°2 Installed power Hp 0,75 Overall dimensions: mm 2550 x 1000 x 1650 h Weight kg 750

Condition: excellent (used), Year of construction: 2015, operating hours: 10,000 h, functionality: fully functional, machine/vehicle number: 141012/1, Equipment: CE marking, The machine is designed for efficient gluing and pressing of veneer edges, with continuous material feeding. It is suitable for carpentry and furniture production, where precise and stable edge processing is required. It features a robust construction, simple operation, and reliable performance. Pjdpszg Dt Sofx Adxjrc

Condition: used, Year of construction: 1993, pressing area: 3000mm x 1900mm pressing units vertical: 3 Podpfx Aoy A Hkzedxjrc pressing units horizontal: 2 pressing system: elctro - hydraulic machine length: 3500mm machine width: 1000mm machine height: 2600mm waight: ca. 900kg

Condition: used, Year of construction: 1997, working width: 630mm Prodewbqi Sjpfx Adxjc feed: 7m/min

Condition: refurbished (used), Year of construction: 1983, machine/vehicle number: 3/1406, functionality: fully functional, table width: 1,300 mm, table length: 2,500 mm, Veneer press, Joh. Langzauner & Sons ----- Technical data ----- Pressing area: 2,550 mm x 1,300 mm, Power per heating plate: 7,200 W, Number of cylinders: 4 pcs. Prodpfxoy Twrke Adxsc

Condition: good (used), Year of construction: 1982, still well-preserved veneer saw with planer unit Pjdpfjyizztox Adxjrc max. cutting length 3050 mm no rear stop included