Used Venture Distributor for sale (406)

Condition: used, Year of construction: 2015, functionality: fully functional, cutting width (max.): 3,210 mm, cutting length (max.): 3,200 mm, overall weight: 1,945 kg, type of input current: three-phase, total width: 3,920 mm, working width: 3,210 mm, total length: 5,100 mm, input voltage: 400 V, input frequency: 50 Hz, The Kongsberg C64 is a used digital cutting table manufactured in 2015. It is in good working condition and has been regularly serviced by an authorized distributor. With a working area of 3,210 × 3,200 mm, it is designed for precise cutting, milling and finishing of large-format materials. Djdpfx Ajzz Igxsk Aokw The machine is equipped with a 3 kW milling unit, an i-camera system, eight vacuum zones, a workstation, the QuickRelease system and a range of tools for cutting, milling, V-notching and processing self-adhesive vinyl. The machine is sold without a conveyor system and is in good working condition.

Condition: used, mileage: 23,300 km, power: 44 kW (59.82 HP), first registration: 07/1960, fuel type: gasoline, color: red, driver cabin: other, gearing type: mechanical, Year of construction: 1960, Vehicle location: Bovenden, Doka, work lights, rotating beacon, leaf suspension Superstructure: LF 8/TS fire-fighting vehicle incl. Bachert portable pump If you have any questions, please call ! Color: red Synthetic leather: dark red / brown Dodpfx Akevhh E So Ajkw 2nd hand H license plate possible Original German cardboard letter, operating instructions, service certificates, internal certificate and history folder are available. The vehicle was extensively restored for over €50,000.00! 4x4, body Carl Metz GmbH Karlsruhe according to DIN 14530, incl. various accessories such as 1 fire pump, nominal flow rate 800l/min, nominal delivery head 80m, water column speed nominal power 2,800rpm, transmission ratio 1:1, incl. various accessories on hoses, pumps, trailer coupling test mark, M787 license plate OG LC 971H, various hose distributors, jet pipes, water jet pump. ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: used, Year of construction: 2002, fuel type: diesel, gearing type: other, color: grey-black, TITLE: LINDE H30D duplex REF: 26M01 YEAR: 2002 SERIAL NUMBER: H2X351N00134 HOURS: 8,400 ENGINE: diesel ORIGIN: Italian MINIMUM OVERALL HEIGHT: 2.65 m MAXIMUM LIFT HEIGHT: 4.10 m MAST: duplex CAPACITY: 3,000 kg EQUIPMENT: with forks SIDESHIFTER: yes WHEELS FRONT: 2 REAR: 2 Dsdpfxjy H S Iye Ak Askw ACCESSORIES: - 4th valve hydraulic distributor REFURBISHED: yes SERVICED: yes TYRES: 80% PRICE: €11,500 + VAT Subject to errors and/or omissions Displayed prices do not include VAT. Please contact our sales team for updated prices and conditions. For more information: Loris: +39 3484773001 URL: #glispecialistidelloscarrabile SCARRABILI AURORA operates in the sale and purchase of industrial and commercial vehicles, specializing mainly in the waste management sector. Specialists in trucks, trailers, and hooklift equipment. Over 50 trucks and 150 hooklift bodies, containers with and without cranes available for immediate delivery. E.&O.E Given the number of listings and the level of detail provided, Aurora recommends verifying the correctness of the listed information with the sales team.

Condition: new, Blade Block / Distributor Block for Siemens SWT-3.6-107 Onshore For sale are four new, unused Siemens Blade Blocks / Distributor Blocks, type ZCH 565227, suitable for Siemens onshore wind turbines in the 2–4 MW power class, including the SWT-3.6-107. The Siemens ZCH 565227 is a central hydraulic module of the pitch system and is responsible for the precise, rapid adjustment of the rotor blade pitch angle. This assembly is a critical safety- and performance-relevant key component, which plays a significant role in yield optimization, load regulation, and operational safety of the wind turbine. As a hydraulic distributor block, the component is fully integrated into the plant’s control architecture and communicates directly with the main control system. Due to the high mechanical and hydraulic loads, only OEM components of the highest manufacturing and engineering quality are used here. The ZCH 565227 type is used in several current Siemens wind turbine models and is considered a critical component for avoiding unplanned downtime. Technical Data: • Manufacturer: Siemens Dkedpfx Asx Tftiek Aow • Type / Part Number: ZCH 565227 • Designation: Blade Block / Distributor Block • Application: Pitch System • Compatible Models: incl. Siemens SWT-3.6-107 Onshore • Power Range: approx. 2–4 MW Condition & Scope of Delivery: • Condition: New, unused, in original packaging • Availability: 4 units immediately available • Delivery: Europe-wide shipping possible These blade blocks are ideal as strategic spare parts to ensure plant availability or for planned maintenance activities. For technical inquiries, serial number verification, or a prompt transaction, we are at your disposal.

Condition: refurbished (used), functionality: fully functional, Year of construction: 1991, machine/vehicle number: plate roll 4roll 3000x13 mm, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 260 mm, roller (top) diameter: 280 mm, side roll diameter: 220 mm, roller diameter: 330 mm, roller length: 3,050 mm, working width: 3,000 mm, working height: 800 mm, sheet thickness (max.): 13 mm, sheet thickness steel (max.): 13 mm, sheet thickness stainless steel (max.): 13 mm, sheet thickness aluminum (max.): 18 mm, sheet thickness brass (max.): 18 mm, sheet thickness copper (max.): 18 mm, overall weight: 7,000 kg, total length: 5,000 mm, total width: 1,500 mm, total height: 1,500 mm, power: 7.35 kW (9.99 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, MCB3028 4 roll hydraulic plate bending machine capacity 3000x13 mm Make Davi Italy - year 1991 Plate width 3000 mm Plate thickness 13 mm Pre-bending 10 mm top roll size 280 mm pinch roll 260 mm Electric power Hp 10 380/50 Vac Configuration installed: -Hardened rolls -Conical hydraulic attachment -Digital position readouts infinitely variable speed control via hydraulic lever distributor Dksdpfx Aj Aa Nm Uok Ajw Driven rollers rotation with axial gearbox each roll central independent front open hydraulic drop-end to unload closed shells machine operating console centralized fully hydraulic -Extended rolls front shafts -one plus station hydraulic to connect an external tool support ---- Machine used refurbished and repainted, rollers surface cleaned, functional all controlled. Manuals and schematics original documents with the machine. Layout 5000x1500xH1500 mm weight 7000kgs

Condition: like new (used), Year of construction: 2023, GENERAL DESCRIPTION: Advanced tooling with a dense and symmetrical structure of the clamping elements. Designed for precise positioning and rigid clamping of geometrically complex components (e.g., car body panels) during automated welding or spot welding processes. The design features a high degree of repeatability of the base points and is fully adaptable for mounting on a welding rotator. COMPONENTS: 1. DESTACO brand pneumatic (knee-type) clamps – 30 pieces. Heavy-duty clamping elements responsible for the mechanical locking of the part. 2. FESTO brand compact pneumatic cylinders – 14 pieces. Used for extending the positioning pins or auxiliary locks. 3. Clamp position sensors (inductive/magnetic) – approx. 30 pieces. Monitor the open and closed states of the clamping elements. 4. Pneumatic installation in thermal shields (Pyrojacket type) – a complete system of manifolds with flexible hoses in thick, red, fire-resistant braids, protecting against welding spatter. Dedez Ng Nyopfx Ak Aekw 5. Valve manifolds / pneumatic distributor blocks – 2 pieces. Control the operating sequences of the individual clamps. 6. Positioning blocks, reference bases (NC blocks) and pins. Precisely milled support points with engraved technological coordinates. 7. Main structural frame – 1 piece. Rigid, stress-relieved welded structure made of closed profiles, equipped with transport lugs and mounting plates for the rotator disc.

Condition: used, mileage: 65,000 km, power: 180 kW (244.73 HP), first registration: 12/1993, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: orange, gearing type: mechanical, emission class: euro2, total length: 7,900 mm, total width: 2,500 mm, total height: 3,460 mm, loading space width: 2,500 mm, Year of construction: 1993, Equipment: ABS, crane, * Mercedes Benz 1824 flatbed truck with HIAB 125 crane with remote control - Original 65,000 km - * Diesel - Engine displacement: 9,572 cc - 180 kW / 240 hp - Euro 2 - Red emissions sticker - NO ALL-WHEEL DRIVE - Dkodpfs Ah Am Sjx Ak Aew * German vehicle - German vehicle registration document - immediately available - from first owner - * Unladen weight: 9,720 kg - Permissible total weight: 18,000 kg - * Sunroof - Rockinger trailer hitch with 40 mm pin - 3 seats - * Includes Langendorf long material trailer from 1988 * Please arrange an appointment for viewing - * Contact person: Mr. Andreas Vogel * The information provided on the internet is a non-binding description. * It does not constitute guaranteed characteristics. * The seller is not liable for typing or data transmission errors. * Subject to change, errors and prior sale. Special equipment: Exhaust emission standard EURO 5 EEV, storage compartment on engine tunnel, front axle load 8.0 t, trailer brake 2-line, audio system: CD radio (Bluetooth), battery 220 Ah, air horn, cab: cab - reinforced shock absorber, cab: movable cab entry, generator 100 A, fuel tank: 300 L aluminum, enhanced cooling, parameterizable special module, Voith retarder, rotating beacon left/right, reversing warning sound (external warning signal), rear window, protective plate under radiator / engine, seats in cab: driver's seat comfort suspension seat incl. horizontal suspension, sun visor, steel rims 9.00x22.5, 12 Volt socket, front bumper in steel design, crossbeam for trailer coupling, front axle angled, additional step for construction vehicles, twin-disc clutch, oil cooler transmission Additional equipment: Exhaust emission standard EURO 5, axle configuration: 4x2, trailer coupling: towing hitch, trailer socket 24V / 15-pin, exterior mirrors electrically adjustable and heated, exterior mirror wide-angle and heated, left, outside temperature display, cockpit distributor, sunroof (steel), differential lock rear axle, cab: mounting for rough terrain (6.0 Hz), cab: S (short), suspension: leaf spring / leaf spring, electric window lifts, rear axle H 7, 13 t, bevel gear 300, hydraulic pump (Meiller pump - 6 pistons), body / structure: chassis for tipper (additional AV), body / structure: tipper, air filter: filter for construction site vehicles, heated air dryer, model update from 06/2008, engine 12.0 L - 320 kW V6 diesel (OM 501 LA), engine brake with constant throttle, auxiliary drive MB 2C, wheelbase 3900 mm, disc brake front axle, voltage converter 24V / 12V 8 A, Telligent - gear shifting, drum brake rear axle, underrun protection rear foldable, preparation for CB radio, preparation for telephone / fax, immobilizer, heat protection glazing, central locking incl. key, permissible total weight 18.00 t

Condition: used, Year of construction: 2023, machine/vehicle number: CA73, Used capsuling machine Robino & Galandrino Minibloc year 2023 – 3000 bphThe used capsuling machine Robino & Galandrino Minibloc year 2003 – 3000 bph offers a compact and versatile solution for automatically applying capsules to bottles of still and sparkling wine. As a result, this machine suits diverse production environments. Robino & Galandrino designed this monoblock machine to meet different production needs while ensuring high operational efficiency and consistent product quality.Structure and mechanical configurationRobino & Galandrino configured this machine as a Minibloc automatic capsuling monoblock. Specifically, the design includes two operational heads, each performing specific stages of the capsuling process. The infeed screw aligns and guides the bottles precisely into the processing area. In this way, the machine ensures accurate bottle positioning throughout the cycle.Performance based on capsule typeThe used capsuling machine Robino & Galandrino Minibloc year 2003 – 3000 bph delivers specific output levels based on the capsule type. Dedpfx Ako Ady Evj Aekw For instance, it distributes and spins polylaminate capsules on still wine bottles at speeds of up to 1200 bottles per hour. It heat-shrinks PVC capsules onto still wine bottles at up to 3000 bottles per hour. It forms four folds and smooths sparkling wine caps (capsuloni) at speeds of up to 2000 bottles per hour. Moreover, each process maintains excellent consistency and minimal deviation. Therefore, it can satisfy various technical bottling standards across the wine sector.Capsule feeding systemThe machine uses a horizontal capsule magazine with a motorized belt that feeds capsules into the distributor. Notably, it holds around 1200 capsuloni or 1800 standard wine capsules, allowing operators to run longer production cycles without frequent reloads. Consequently, this reduces machine downtime and improves overall line efficiency. Additionally, the feeding system ensures steady capsule flow under different operating speeds. Thus, it contributes to the machine’s stability and reliability.Distributor and synchronization mechanismsThe single-bell distributor performs a 90-degree angular movement to release the capsules. At the same time, a mechanical needle system separates the capsules before distribution to prevent jams and ensure a continuous process. Furthermore, the encoder actively manages the synchronization of all functions and adjusts them in real time. Thanks to this, the system can react dynamically to changes in bottle flow and capsule format. In contrast to older systems, this configuration minimizes manual calibration.Format compatibility and flexibilityThe machine processes bottles in three formats: 0.375 liters, 0.75 liters, and 1.5 liters. Accordingly, operators can use it across different bottling lines and product ranges. In fact, the used capsuling machine Robino & Galandrino Minibloc year 2003 – 3000 bph adapts well to the needs of small and medium-sized wineries that require flexible equipment.Operational conclusionsTechnicians appreciate the used capsuling machine Robino & Galandrino Minibloc year 2003 – 3000 bph for its solid mechanics and well-optimized capsuling system. In particular, the dual-head structure and encoder-based adjustments enable precise operation and quick format changes. Moreover, i...

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, FLOW & THERMAL Regenerative Thermal Oxidizer (RTO), 18,000 Nm³/h (2021) Complete industrial system for the treatment of process water containing Volatile Organic Compounds (VOCs), consisting of stripping columns and a three-chamber Regenerative Thermal Oxidizer. Manufactured by Flow & Thermal Solutions / TECAM in 2021, the equipment was installed at a PET production plant and remained operational until the factory closed on 27 November 2025. The system removes VOCs from the water by means of air stripping and subsequently destroys them in the RTO through high-temperature thermal oxidation. Heat recovery through ceramic media helps reduce natural gas consumption. Main features • Manufacturer: Flow & Thermal Solutions / TECAM • Year: 2021 • Serial number: F002 • RTO nominal capacity: 18,000 Nm³/h • Configuration: three-chamber regenerative RTO Dsdpfjzvcknex Ak Aekw • Fuel: natural gas • Honeywell / Eclipse TJ 200 burner • Burner output: 58–586 kW • Electrical supply: 400 V, 50 Hz • Electrical power stated on the nameplate: 40 kW • 30 kW Soler & Palau ATEX main fan • Siemens PLC automation with HMI touchscreen • LEL monitoring, purge, dilution, bypass and pneumatic valve systems • Vertical stack: 10 m high, diameter: 800 mm • CE marked Performance and operation The equipment operated at actual flow rates close to its nominal capacity, with recorded values ranging from approximately 16,400 to 17,900 Nm³/h. The latest available emissions test, carried out by DEKRA in December 2023, recorded the following values: • TOC: 13 mgC/Nm³ • NOx: 3–4 mg/Nm³ • CO: 125–153 mg/Nm³ During the tests, the equipment operated at an approximate temperature of 775–780 °C, with a treated water flow rate of 3.5 m³/h. Stripping columns The system includes: • Original stripping column, designed for approximately 6 m³/h. • Second Tecnium SLFKK9 stripping column, manufactured in PPH, with a nominal capacity of 8 m³/h and a maximum capacity of 10 m³/h. The second column was installed, but it is currently dismantled and lying on the ground after being knocked down by strong winds during the winter. It has a hole in the base which, according to the available information, is considered potentially repairable. The Tecnium column is equipped with internal packing, distributors, a mist eliminator, connections, drainage and provisions for integration with the existing control system. Condition and maintenance The system remained operational until the final closure of the plant in November 2025. The latest preventive maintenance was carried out by TECAM in June 2025 and included mechanical and electrical inspection, burner, fans, stripping columns, instrumentation, valves and functional testing. The equipment was operational, although maintenance work is required before recommissioning, mainly involving: • Process valves • Internal insulation of the towers • Ductwork and seals • Main fan impeller and expansion joints • Repair of the base of the second stripping column TECAM technical documentation is available regarding the recommended works, and several spare parts are also available. Scope of supply The system includes: • Three-chamber RTO • Combustion chamber • Burner and gas train • Main fan • Two stripping columns • Dilution and purge system • Hot bypass • LEL analysers • Stack • Ductwork • Electrical cabinets and controls • Platforms, ladders and support structures • Available spare parts

Condition: good (used), Hydraulic manifold block, hydraulic fitting, hydraulic T-distributor, hydraulic distributor, e metro fitting -Hydraulic distributor: Hydraulic distributor with 10 stations -Type: 3000-2 1/2-76.1 A3L -Installment: 7x shut-off valve with hose and control valve -Pressure: up to 350 bar -Dimensions: 1055/680/H150 mm -Weight: 31 kg Dsdpfjyx Dfnox Ak Aokw

Condition: like new (used), Year of construction: 2019, Technical Data: Cross-cutting line with punching unit Strip running direction from the operator's side: right to left Coil changing side in strip running direction: left Operator's side, straightening machine in strip running direction: left Raw material: • cold-rolled strip: S320GD; S350GD; S380GD (strip-galvanized structural steels) • plastic-coated steel strip • aluminum • basically dry surface or commercially oiled • laminated strip • stainless steel Uncoiler: Type: Power Coil M-BS 1600 2 coil loading stations The coil storage track is designed so that a distance of 900 mm remains between 2 coils with an outer diameter of 1600 mm Loading semi-automatic Strip width 200 – 1600 mm Max. coil weight: 16 tons Coil diameter inside uncoiler: 508 - 610 mm Coil diameter outside uncoiler: 900 - 1600 mm Spreading range 470 – 625 mm Machine frame movable on linear guides Spreading hydraulically Strip withdrawal from the coil automatically Coil side guidance automatically, 4-point coil side guidance Press roller, rubberized, centrally positioned on the strip, hydraulically Electrical locking of lifting and traversing movement Control system: Control concept LBF – Control Concept LSV SCHULER Cross-cutting shear: Type: SCHULER HSU-1600 Shear gap adjustment is carried out by motor The shear is used to cut the strip end at a right angle before processing the first part of a production sequence. Bridging roller bed: Arrangement of the bridging roller bed upstream of the straightening machine Type: VOMA C1600 N Passage, max. strip width 1600 mm Length of bridging roller bed 1050 mm Material running height in the straightening machine 1600 mm Straightening machine: Type: SCHULER SVH 12-53-70-96 / 160-1600 Straightening speed max. 60 m/min. Straightening speed min. 5 m/min. Number of straightening rollers 12 pcs. Diameter of infeed rollers 160 mm Diameter of straightening rollers 3 x 53 mm, 3 x 70 mm, 6 x 96 mm Dsdpfszzrutjx Ak Ajkw Loop radius 1600 mm Material running height in the straightening machine 1600 mm Strip side guidance automatically Support rollers to prevent roller deflection All-roller drive Looping unit: Threading process in the direction of roller feed via looping bridge, remote-controlled Automatic loop control for continuous straightening process Loop depth below floor approx. 2,500 mm 4-point guidance through 2 sequentially arranged strip side guides To increase feed accuracy, the feed length is recorded by means of a measuring wheel (arranged in front of the feed rollers) Roller feed: Type: SCHULER AC-RP-160-1600 Feed rollers, diameter 160 mm Loop radius 1600 mm Material running height above floor 1200 mm Drive, upper and lower roller, servo drive via a common distributor gear Special coating of the feed rollers Max. acceleration 15 m/s² Brake rollers: Brake rollers generate the strip pull during the rewinding of the strip material from the system onto the coil, in a generator-like manner Adjustment system hydraulically Punching unit with NC tool holder: Type: SCHULER HSU-1600 Design: Double C-frame Punching unit designed as 2 C-frame units, which can be traversed transversely to the strip direction by means of 2 servomotors, for accommodating the punching tools Number of punching tools per side max. 6 pcs. Punching tool, servomotor-driven, 90° rotatable 1 punching cylinder per punching tool Punching force min. 580 kN Max. hole diameter ∅ 90 mm for material thickness 4 mm Manufacturer of punching tools: WILSON TOOL Elevating table: Type: LAWE

Condition: like new (used), Year of construction: 2020, operating hours: 574 h, functionality: fully functional, consisting of: additional vacuum tank for workpiece clamping, complete with vacuum distributor and control logic in automatic cycle 6.6 kW / 9 HP (S6) electric spindle Remote service system Cable remote control for easier positioning and adjustment Robot: Automatic loading and unloading system for glass panels Loading and unloading trolley with locking wheels Mechanical/electronic device on the robot head to center the workpiece on the work surface Pneumatically retractable workpiece stop various double vacuum suction cups various tool sets incl. FILTRAGLASS ECO-BOX CNC grinding coolant cleaning system incl. Stainless steel chamber tank approx. 3,000 l, 3,000 x 1,000 x 1,000 mm, 3 chambers, circulation pump, agitators, filter unit approx. 800 x 600 x 1,780 mm, electrical connection 230 V / 1.5 kW, compressed air connection to be provided on site, 7-8 bar (480 Nl/min) Dksdpfx Aksw H R A No Asw Dismantling/removal must be carried out by the buyer.

Condition: good (used), Hydraulic manifold block, hydraulic fitting, hydraulic T-manifold, hydraulic distributor, e metro fitting -Hydraulic distributor: Hydraulic distributor with 10 stations -Type: 3000-2 1/2-76.1 A3L Dkedpfxsyx Ddqo Ak Ajw -Configuration: 7x shut-off valve with hose -Pressure: up to 350 bar -Dimensions: 1085/660/H140 mm -Weight: 28 kg

Condition: excellent (used), Index MS42C HBF rod guide Oil distributor Flaps Djdpofdr R Uefx Ak Askw with tensioning screws

Condition: good (used), Year of construction: 2022, Brand: Dr. Boy GmbH & Co. KG Type: BOY 60E #55841 Year of manufacture: 2022 Operating hours: On request Screw diameter: 32 mm Maximum injection pressure: 2,142 bar Maximum shot volume: 100.5 cm³ Clamping force: 60 T Maximum distance between tie bars: 360 x 335 mm Minimum mold height: 250 mm Dsdsz Tiwhspfx Ak Ajkw Maximum distance between platens: 650 mm Electrical connection: 400 V / 50-60 Hz, 27.2 kVA Heating capacity: 8.4 kW Dimensions: 3,450 x 1,150 x 1,950 mm (L x W x H) Weight: 2,300 kg Options: • Procan ALPHA 4 control system, 15" full-touch display • TEC Package 1: wear-resistant screw and barrel, ceramic heaters • Interface package including OPC-UA, Euromap 77 & 82 • Cooling circuits (3x) on both platens + 8-way water distributor • Oil filling (EconFluid, ISO-32)

Condition: excellent (used), Year of construction: 2021, GANNOMAT "PROTEC 571" (drilling, grooving, milling) with Clamex and milling tool In top condition Base machine complete in standard configuration for drilling and grooving including: - Additional safety device via louver curtain - Prerequisite for horizontal Lamello P-System milling - Prerequisite for milling diameters > Ø 16 mm, as well as for the use of multi-part milling tools Detailed technical data can be found in the data sheet for ProTec Type 0571 Machining unit with: PowerBlock with 21 spindles and 1 grooving saw - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y / 2 horizontal drilling spindles in X - 1 grooving unit in Y Workpiece sizes and weights - Workpiece width (X): min. 60 mm / max. 1000 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm - Workpiece length (Y): min. 250 mm in continuous mode max. 5600 mm programmable workpiece length in software - Workpiece weight: max. 75 kg 1 Milling unit Profit HSK63F with 3-way magazine for automatic tool change, motor 5.5 kW (S1), 1000-18000 rpm with frequency converter, clockwise and counterclockwise rotation, for tool holder HSK63F with collet 462E/OZ25, milling cutter length up to 130 mm including options 1 roller table 765 mm (Y-axis) foldable, for the front of the machine, width 500 mm 1 roller table 765 mm (Y-axis) foldable, for the back of the machine, width 500 mm 1 auxiliary stop 600 mm with integrated rollers for roller tables 1 SET OF TOOLS: Drill set for ProTec 1 carbide grooving cutter  125/30 mm, grooving cutter width (SB) 4 mm, Z=12, LI, from Leitz 1 tools for milling unit Profit HSK63F and HSK63F with 3-way magazine with collet 462E up to shank diameter 25 mm, HSK and milling cutter set easiest operation with the highest level of comfort thanks to the roller clamping system, no clamping or securing required, Dedpfx Aozu A D Eok Aokw mounted on a stable base or on a workbench, 1 hook wrench for HSK63F collet 462E, 1 extraction distributor Ø 160 mm / Ø 80-80-80 mm, grid 196 mm 1 counter pressure device from above 1 tool for vertical Lamello P-System milling Machine in very good condition including many drills and tools Machine can be inspected and demonstrated at our showroom. Location: in stock, 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2020, Overview Krones Ergomodul modular container labeller. Containers run anticlockwise after the infeed in a frontal arrangement with two discharge starwheels. Finish RAL 9018 papyrus white in the wet-line section. Two docking positions at the carrousel, both in operation, accept the four labelling stations without tools, so cold-glue and self-adhesive labelling run on the same carrousel; height adjustment of the top part and each station is motorised with container type preselection. Dksdpfx Ajzzz N Hsk Aew Technical data - Manufacturer: Krones - Model: Ergomodul - Year of manufacture: 2020 - Table pitch diameter: 1,200 mm - Rotary plates: 30 - Machine pitch: 125.6 mm - Main drive: controlled servo motor; Danfoss servo motors, container table - Cold-glue stations (2x): ERGOMATIC-CL, 8-shaft glue pallet carrousel, 8-section gripper cylinder d = 350 mm, unwinding length 40-130 mm, steel glue roller, integrated glue pump, gluing height 5-215 mm, housing stainless steel, AISI 304-similar - Self-adhesive stations (2x): AUTOCOL-TS 120, web speed 120 m/min, supply tolerance +/- 0.5 mm, four-axis stand (application height, container diameter, conicity, sloping position), two-reel holder with automatic splicing and end-of-reel detection, driven carrier-film rewinder, ionisation unit, reels up to 390 mm outer diameter, carrier film up to 150 mm - Container infeed: worm with servo drive; detects damaged and fallen-over containers - Container orientation: prepared for camera orientation at the carrousel (360-degree monitoring, one camera); electrical interface prepared, mechanical adjustment unit not installed - Coding: prepared for a laser coder at the carrousel, with laser guarding, safety switch, clock pulse, oil-free air supply - Conveyors: flat-top chain, 83.8 mm wide, stainless steel (AISI 304-similar); servo-driven infeed, PM-motor discharge, centralised frequency inverter control - Machine guarding: lifting doors at the carrousel (polycarbonate), hinged doors at the front table (tempered safety glass) - Pneumatics: Festo; Bosch-Aventics, Norgren Herion, SMC, Bürkert components - Electrical: 400/230 V, AC 3/N/PE, 50 Hz, 28 A full load, 50 A back-up fuse; UPS 400/230 V, 17 A - Media: 92.4 m³/h oil-free compressed air, 0.009 m³/h process water - Weight: approx. 10,600 kg total (carrousel 3,200 kg, front table 3,000 kg, 1,100 kg per cold-glue station, control cabinet 1,000 kg) Equipment - 2x ERGOMATIC-CL cold-glue labelling stations, interchangeable - 2x AUTOCOL-TS self-adhesive labelling stations, interchangeable - Stand-alone control cabinet with Krones iPanel operator terminal - Central lubrication (Lincoln progressive distributor with motor pump) - Ecopush rejection module - Handling parts set on trolleys The inspection unit (Checkmat) and the container coding device used with this labeller are not part of this machine. Condition Used, still installed and under power in an operating line; on-site inspection possible before purchase. Availability Available now. The machine is in Belgium and will be dismantled and moved to our location in Germany; dismantling, loading and transport quoted on request.

Condition: used, mileage: 73,639 km, power: 115 kW (156.36 HP), first registration: 11/2010, fuel type: diesel, overall weight: 9,500 kg, axle configuration: 2 axles, next inspection (TÜV): 11/2026, color: blue, gearing type: mechanical, emission class: euro5, loading space volume: 4 m³, loading space length: 4,000 mm, loading space width: 2,300 mm, loading space height: 400 mm, Year of construction: 2010, Equipment: ABS, electronic stability program (ESP), Well-maintained Atego MB 816 three-way tipper truck Special equipment: Trailer brake, 2-line; trailer coupling: towing hitch; trailer coupling: central axle trailer G 250; trailer socket 24V / 15-pin; audio system: CD radio; transmission: 6-speed - type: G 60-6; graphics information display with eco-meter; hydraulic pump (Meiller pump - 5 pistons - 254 / 1); engine start/stop system; spare wheel holder behind the rear axle; rear window; seats in the cab: middle seat with seatbelt; socket in the cab, 24V; crossmember for trailer coupling Dedpezu H Emjfx Ak Askw Additional equipment: Emissions standard EURO 5; axle configuration: 4x2; exterior mirrors, electrically adjustable and heated; battery 115 Ah; cockpit distributor; roof hatch (steel); differential lock, rear axle; cab: S (short); suspension: leaf spring / leaf spring; generator 80 A; urea tank (AdBlue): 25 liters; urea tank (AdBlue): plastic; rear axle H 2, crown wheel 325; interior filter: pollen filter; body/superstructure: tipper; fuel tank: 105 liters; Atego 2 model upgrade; engine 4.3 liters - 115 kW diesel (OM 904 LA); engine brake with constant throttle; auxiliary drive MB 1C; wheelbase 3020 mm; disc brakes; side impact protection; seats in the cab: single passenger seat, fixed; seats in the cab: driver's seat, standard suspension seat; steel rims 6.75x17.5; underrun protection, fixed, rear; underrun protection, front; immobilizer; permitted total weight 9.50 t Tire condition, front axle approx.: 60%; rear axle approx.: 50% Errors and prior sale excepted!

Condition: used, machine/vehicle number: 008166, X axis working area: 4250 mm Y axis working area: 1250 mm Working Table: Pod and Rail Main Electrospindle power: 9 KW Dsdpfx Aoyy U S Isk Aokw Number of controlled axes: 4 axes Total number of drilling spindles: 25 Total number of tool changer positions: 14

Condition: new, Year of construction: 2024, functionality: fully functional, Baty Venture FV - Flexible and precise vision measurement system in three variants The Baty Venture FV is a state-of-the-art vision measuring system developed for the fast and precise inspection of complex workpieces. It provides optical measurements that enable comprehensive detection of the workpiece geometry. This system is particularly suitable for the manufacturing industry, which demands both speed and precision in quality control. The Venture FV is available in three different versions to cover different measurement requirements: Available models: Baty Venture FV1080 With a measuring range of 100 mm x 80 mm, this compact version is ideal for smaller workpieces. It offers fast and precise inspection and is perfect for applications where both optical and tactile measurements are required. Baty Venture FV2020 This variant has a measuring range of 200 mm x 200 mm and is suitable for medium-sized workpieces. The CNC control in combination with the Fusion 3D software enables fully automatic measurements, which increases efficiency and precision during inspection. Dsdeuyig Sopfx Ak Ajkw Baty Venture FV3020 With a larger measuring range of 300 mm x 200 mm, the FV3020 is the largest variant available. It is particularly suitable for the inspection of complex workpieces where high precision and detailed measurements are required. Common functions: CNC control: all models are CNC controlled, enabling fully automated, repeatable measurement processes that increase throughput on the shop floor. Software: This powerful software supports CAD import/export, DXF overlays and reports that include statistical process control (SPC). Programmable LED lighting: LED lighting provides optimal illumination of the workpiece to enable accurate edge detection and measurement. Advantages: Versatility: with three different variants, the Baty Venture FV offers the perfect solution for workpieces of different sizes and complexity. High measuring speed: Thanks to the CNC control and user-friendly software, measuring times are reduced and efficiency is increased. Precision: The measuring device ensures that both simple and complex workpieces are measured with maximum accuracy. The Baty Venture FV offers the ideal combination of speed, precision and flexibility for companies that need a reliable inspection solution in their production

Year of construction: 2021, condition: like new (used), WeissTechnik ClimeEvent C/180/70a/3 climatic chamber – year 2021 – EXCELLENT CONDITION For sale: a professional WeissTechnik ClimeEvent C/180/70a/3 climatic chamber, manufactured in Germany in 2021. The unit is in excellent technical and visual condition. It has only been used a few times, so it shows minimal signs of wear. The chamber was purchased from an official Polish distributor and has been serviced regularly. Key information: * Year of manufacture: 2021 * Used only a few times * Technical and visual condition: EXCELLENT * Unit is 100% functional * Regularly serviced * Purchased from an official distributor in Poland * German production – high quality and reliability Technical specifications: * Manufacturer: Weiss Technik * Series: ClimeEvent * Model: C/180/70a/3 * Year of manufacture: 2021 * Chamber volume: 180 liters * Temperature range: from -70°C to +180°C * Relative humidity control: typically from 10% to 98% RH * Rated current: 15 A * Rated power: 5.3 kW * Power supply: 3/N/PE AC 400 V * Country of manufacture: Germany Temperature and humidity control The WeissTechnik ClimeEvent climatic chamber enables precise environmental testing under controlled temperature and humidity conditions. The humidity control system allows for simulating various climatic conditions, including high-humidity environments, which makes it possible to test the resistance of materials, electronic components, and finished products. Possible applications: * Climatic and environmental testing * Resistance testing to high and low temperatures * Testing under high-humidity conditions * Material aging studies * Testing of electronic components * Quality control in industry * Laboratory and research & development (R&D) studies Condition of the unit The chamber has been used sporadically and is in excellent condition. It represents an attractive alternative to purchasing a new unit, offering professional research capabilities at a significantly lower cost. Dkodpoz Tzvvsfx Ak Aow The unit is fully functional and ready for further use.

Condition: excellent (used), Year of construction: 2001, operating hours: 1,941 h, Equipment: cabin, FENDT 716 Tractor YEAR 2001 1941.8 mtg, VARIO BOX SUSPENDED CAB SUSPENDED FRONT AXLE WITH FRONT LINKAGE Dkodpfxsukq Nzj Ak Aow FRONT PTO HYDRAULIC AND PNEUMATIC BRAKING 4 REAR HYDRAULIC DISTRIBUTORS 1 FRONT DISTRIBUTOR WHEELS 540/65 R 38 AND 540/65 R 28 + NARROW WHEELS 900/95 R 46 AND 270/95 R 32

Condition: good (used), functionality: fully functional, Year of construction: 2005, operating hours: 18,000 h, SAMPO-ROSENLEW 1066 — forest harvester Year 2005 · 18,000 hours · 4-wheel drive EQUIPMENT • KETO 150 SUPREME harvester head • AGCO Sisu 6-cylinder engine • EPEC 4W30 control system, IQAN display • Measuring equipment Dkodpfxepugxnj Ak Aow • Air conditioning • Vacuum pump • Feed rollers • Wheel chains included • Built in Finland RECENT MAINTENANCE • New injection pump • Reconditioned distributors • Reconditioned working pump (100 h) Machine in good working order, ready to work. Available for inspection and testing on site in Teiu, Hunedoara county, Romania. Price EUR 19,000 ex works Teiu, excluding VAT. Intra-EU supply at 0 % with reverse charge for VAT-registered buyers in the EU.

Condition: used, functionality: fully functional, mileage: 250,300 km, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,400 mm, fuel: diesel, color: white, driver cabin: day cab, number of seats: 3, Year of construction: 2019, Equipment: air conditioning, crane, NISSAN CABSTAR 35.15 - NT 400 - DRIVING LICENSE B REQUIRED 4x2 - Year 2019 DIESEL / Euro 6B Mileage: 250,300 km Manual transmission / Engine displacement: 2953 / Power: 96 kW GVW: 35 quintals / DRIVING LICENSE B REQUIRED Payload: 660 kg / Wheelbase: 3,400 mm Accessories: - Air conditioning Equipment: - Fixed cargo box: 4300 x 2100 mm - Wooden floor - BONFIGLIOLI P3500/L 3SI crane * Proportional distributor * Radio Dksdpfo Ahy Elox Ak Aew

Condition: ready for operation (used), Year of construction: 2015, operating hours: 29,446 h, clamping force: 2,600 kN, screw diameter: 60 mm, overall weight: 22,300 kg, controller manufacturer: ENGEL, controller model: CC300, product length (max.): 8,780 mm, Electrical injection moulding machine manufactured in 2015. This Engel e-victory 1640/260 features a clamping force of 2600 kN and an injection unit of 1640. It includes a tiebarless clamping system and a servo-electric injection system for high efficiency. If you are looking to get high-quality injection moulding capabilities, consider the Engel e-victory 1640/260 machine we have for sale. Contact us for further details. Dksdpfx Akoz Dgrpj Asw • Max swept volume cm³ 792 • Screw speed max r/min 250 • Injection rate cm³/s 765 • Spec. Injection pressure bar 2330 • Injection unit: 1640 • Injection system: Servo-electric, high execution • L/D ratio: 24 • Clamping system: Tiebarless ENGEL clamping system • Control unit: ENGEL CC300 (21.5" Full HD touchscreen) • Hydraulics: ECODRIVE SHV1 (1 demand-regulated servo pump) • Electrical connection: 3 x 400 V + N + PE, 50 Hz • Nominal connected load: approx. 164 kW • Centering: 160 mm • Hydraulic core pulls: 2 on moving platen, 2 on stationary platen • Vacuum/compressed air circuits: 8 on stationary platen with Venturi nozzles and pressure switches • Pneumatic mold valve control: 2-fold FESTO, up to 16 bar • Mold heating: 16 control zones, max heating power 25 kW • Nozzle radius: 15 mm • Nozzle bore: 4 mm • Nozzle contact stroke: approx. 405 mm • Hydraulic tank capacity: Main tank approx. 490 l, suction tank approx. 220 l • Robot interface: Euromap 67 / AN-146 • Additional equipment • MuCell package: • Complete MuCell Basic Package • PM cold-work steel screw Ø 60 mm • Hydraulic needle shut-off nozzle • Melt pressure sensor • Trexel auxiliary equipment: SII VC 30, MIK 1060 SII • Frame for two 50 L gas cylinders • Mold temperature control: 3 ENGEL flomo distributors (24 monitored circuits total) • Including GEKU robot