Used Vertical Boring for sale (12,075)

Condition: good (used), Year of construction: 2014, functionality: fully functional, Hurco VM 20 i, Year of manufacture: 2014, Control system: Winmax, Travel range X/Y/Z: 1016/508/400 mm, Tool changer: 24-position, Tool holder: SK 40, Spindle speed: up to 12,000 rpm, Chip conveyor, Approximately 11,000 operating hours. Njdpfx Akjzc Icwjqjdc

Condition: excellent (used), Year of construction: 2007, DMG DMC 1035 V Machining Center DMG DMC 1035 V with Heidenhain ITNC 530 Control, Year 2007, in Excellent Original Condition The machine comes from the toolmaking department of a renowned German mechanical engineering company. CE compliant!! Nedpjxqgrxsfx Akqsdc Technical Data: Year of manufacture: 2007 Technical Details X-travel: 1,035 mm Y-travel: 560 mm Z-travel: 510 mm Control: iTNC 530 Heidenhain Main Spindle: Speed Range (Main Spindle): 20 – 8,000 min⁻¹ Drive Power (Main Spindle): 13 / 9 kW Tool Holder BT 40 Draw Bar: ISO 7388-3-A AD40 Work Table: Clamping Surface: 1,200 x 560 mm Max. Table Load: 1,000 kg Table Height above Floor: 720 mm T-slots: 5 x 14 x 100 Tool Changer: Number of Tool Stations: 20 Max. Tool Diameter: 80 mm Max. Tool Diameter with free adjacent slot: 130 mm Max. Tool Length: 300 mm Max. Tool Weight: 6.0 kg Tool Change Time: 1.6 sec Chip-to-chip Time: 7.0 sec Feeds: Feed Rate: 24,000 mm/min Rapid Traverse: 30 m/min Connected Load: 20 kVA Machine Weight approx.: 4.5 t Required Installation Space approx.: 4.0 x 4.0 x 2.5 m About the machine: Offered here is a DMG DMC 1035 V machining center with a Heidenhain ITNC 530 control. This machining center is in excellent original condition. It comes from a facility where it was used primarily for training purposes, meaning minimal hours of operation. The control is very easy to operate. The guideways are regularly lubricated by centralized lubrication. The DMG DMC 1035 V has been mechanically and electrically inspected by us. Take the opportunity to visit and inspect the DMG DMC 1035 V under power at our premises. You will find further milling machines from leading manufacturers on our website.

Condition: used, functionality: fully functional, Year of construction: 2026, load capacity: 159 kg, empty load weight: 330 kg, construction height: 1,980 mm, fuel type: electric, total length: 1,310 mm, drive type: Elektro, construction width: 740 mm, working height: 9,570 mm, Vertical lift Technical condition: New Nsdpfjzmzuajx Akqodc

Condition: used, Year of construction: 2014, x-travel 1060 mm y-travel 520 mm z-travel 610 mm control Siemens Ndjdpfo Aaq T Njx Akqsc weight of the machine ca. 5900 kg

Condition: ready for operation (used), Year of construction: 2000, Available immediately ex-works: Njdpfs Aa Irpex Akqjdc CNC vertical machining center, Quaser Type MK 60 II Year of manufacture: 2000 CNC control: Fanuc 18 M Table: 1050 x 550 mm Travel ranges X/Y/Z: 1020/610/560 mm Spindle taper: SK 40 Tool magazine: 36 positions Spindle speeds up to 10,000 rpm Power at the spindle: 15 kW Internal cooling system Weight: 8.5 tons Price: EUR 8,500.00 plus VAT, ex-works.

Condition: new, Year of construction: 2027, NEW MACHINE TECHNICAL DATA: Working diameter 1600mm Max. workpiece height 1000mm Max. workpiece weight 6300kg Face plate diameter 1400mm Face plate rotation speed 0-200rpm Max. torque on face plate 25000Nm Performance of main drive 75kW SETTINGS: -5-fold turret or quill support -Zentral lubrication SKF/VOGEL -Version .300 - 2 step main gear -12 month warranty -complete electrical installation 230/400V,50Hz, Made-in-Germany, CE-Norm OPTIONS: -Capto tool holder system -machine housing -chip conveyor -cooling water preparation -Side support -... CONTROL: Nodsrcivgspfx Akqedc Cycle control OTHER: Geometrical-acceptance according DIN8609

Condition: used, Year of construction: 2018, operating hours: 400 h, machine/vehicle number: 5455, load capacity: 200 kg, overall weight: 2,680 kg, construction height: 2,000 mm, product width (max.): 1,030 mm, Nähere Angaben und weitere Bilder erhalten Sie gerne auf Anfrage. Diese Beschreibung stellt kein verbindliches Angebot dar und kann Fehler beinhalten. Keine Gewähr auf alle Angaben. Njdpfx Aozcbc Dekqedc

Condition: good (used), functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 300 mm, controller manufacturer: Fanuc 16i-M, controller model: 16i-M, table width: 390 mm, table length: 850 mm, rotational speed (min.): 80 rpm, rotational speed (max.): 8,000 rpm, spindle speed (min.): 80 rpm, spindle speed (max.): 8,000 rpm, Equipment: documentation/manual, rotational speed infinitely variable, X-axis travel: 500 mm Y-axis travel: 380 mm Z-axis travel: 300 mm Table size: 850 × 390 mm Ndodsyw Inqspfx Akqjc Controller: Fanuc 16i-M Spindle taper: BT30 Spindle speeds: 80 - 8000 rpm Tool changing time: 1.0 sec. ATC: 14 pockets Including: 3x machinevices 36 Toolholders Oilfilter Filtermist S800 Machine manuals Country of origin: Japan Motor power: 3.7 kW Machine (L×W×H): 160 × 190 × 220 cm Machine weight: 1900 kg

Condition: used, Year of construction: 2008, travel distance X-axis: 1,300 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller model: Fagor 8055i PLUS-M, workpiece weight (max.): 8 kg, table width: 610 mm, table length: 1,440 mm, overall weight: 6,800 kg, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 24, CNC machining center Brand: Pinnacle Model: LV-126 Year: 2008 Weight: 6,800 kg CNC: Fagor 8055i PLUS-M Travel (X, Y, Z): 1300, 610, 610 mm Work table: 1,440 x 610 mm Tool changer: 24 tools Maximum tool weight: 8 kg Spindle speed: 8,000 rpm Taper: ISO 40 Linear guides: Class P, 45 mm width Ballscrew: 40 mm, C3 precision Axes: 3 Machine from IAIN Mecanizados workshop in Hospitalet de Llobregat. Nodpfey Axdgsx Akqedc Visits can be arranged to view the machine on site.

Condition: excellent (used), Year of construction: 2010, CNC machining center Nsdpfx Asz Iyp Aekqjdc DMG 1035 V ecoline 2010 Siemens 810 D / Shopmill Travel ranges: X-axis: 1035 mm Y-axis: 560 mm Z-axis: 510 mm Spindle: Tool holder: SK 40 Speed range: max. 10,000 rpm Tool magazine: 20 magazine positions Table design: Fixed table 1200 x 560 mm - Chip conveyor - Internal cooling lubricant system (IKZ) 20 bar

Condition: excellent (used), Year of construction: 2006, A full set of 5 Cogsdill Boring, facing, and contouring heads. Comprising - ZX300 Facing & Contouring Head Bi-directional Stub Tool Seat Pocket Tool Single Slide Tool Valve Seat Pocket Tool Extension and support bars included, with bespoke stand as shown. Operations include: Boring, Facing, Contouring, Threading Taper Boring, Deep Cavity Boring Ndodpfez Erx Dsx Akqoc Grooving. Profiling, Back-spotfacing Chamfering, Bottle Boring. Radii

Condition: good (used), Year of construction: 2011, Machine is in good working condition. Parts shown by hand not come. Ndedpfsz Nx Ubox Akqoc

Condition: excellent (used), Year of construction: 2017, POSmill C 800 Compact – CNC machining center – Year of manufacture 2017 – Heidenhain TNC 620 Technical data: - Manufacturer: POSmill - Model: C 800 Compact - Year of manufacture: 2017 - Control system: Heidenhain TNC 620 - Travel in X: 800 mm - Travel in Y: 520 mm - Travel in Z: 550 mm - Table size: 950 × 520 mm Nodpfxsz Ny H Es Akqodc - Spindle speed: max. 10,000 rpm - Tool holder: SK 40 - Tool changer: 24-position (subject to confirmation) - Machine weight: approx. 6,800 kg - Rated power: 25 kVA Operating hours: - Control system on: approx. 35,524 hours - Machine on: approx. 29,264 hours - Program run: approx. 14,359 hours - Spindle S1: approx. 11,651 hours Further information and viewings by appointment.

Year of construction: 2004, condition: used, Emmegi Comet Isola, 4 Axis CNC Vertical Machining Centre for Milling, Drilling and Tapping Aluminium with Emmegi CNC Control (Isac Cam Editor), Bed Length 6800mm, X Axis 5500mm, Y Axis 525mm, Z Axis 380mm, Pneumatic Vices and Auto Vice Positioning. S/No. M271748 (2004) Machine Weight 5300kg Nodpfxsz Rnwze Akqodc Location: These lots are located in Scotland, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: good (used), Year of construction: 2008, functionality: fully functional, Hurco VMX 50 T, Year of manufacture 2008, Winmax control system, 40-position tool changer, High-pressure coolant system, Spindle speed up to 12,000 rpm, Chip conveyor, Simulation graphics, Pocket with islands, Synchronous tapping, Helix, 3D option, NC/dialog mix, Surface selection, Ndsdpfx Akey T Iwqsqec Tool change optimization, Tool and material database, X-axis bearing likely defective.

Condition: good (used), Year of construction: 2007, functionality: fully functional, Spinner MCV 610, Year of manufacture: 2007, Control system: Siemens Sinumerik 840 D, Travel range X/Y/Z: 610/500/500 mm, Ndsdpfxozt Iuye Akqoc Spindle speed: up to 10,000 rpm, Spindle taper: SK 40, Tool changer: 24 positions, Table size: 1000 x 600 mm.

Condition: like new (used), Year of construction: 2016, Quaser MV 184 C / 10 B Quaser MV 184 C/10 B machining center with Siemens 828 D control, manufactured in 2016, in very good original condition. The machine comes from the training workshop of a renowned German mechanical engineering company. CE compliant!! and has 5,700 spindle hours. Technical data: Year of manufacture 2015 X-axis travel 1,020 mm Y-axis travel 610 mm Z-axis travel 610 mm Control system Sinumerik 828 D Siemens Main spindle: Max. speed 10,000 min/-1 Drive power - main spindle 15 kW Tool holder SK 40 Spindle bearing diameter 70 mm Distance spindle / table 100 - 710 mm Work table: Table clamping surface 1,200 x 600 mm Max. table load 500 kg T-slots 6x 18 H8 x 100 Tool changer: Number of tool positions 30 Max. tool diameter 76.2 mm Max. tool diameter with free adjacent pocket 125 mm Max. workpiece length 280 mm Max. tool weight 7 kg Tool-to-tool change time 2.5 sec Chip-to-chip change time 4.0 sec Feeds: Feed rate 1 - 24,000 mm/min Rapid traverse (X / Y / Z) 32 / 32 / 24 m/min Total power requirement 20 kVA Nodpfxezg Hnfo Akqjdc Machine weight approx. 7.3 t Space requirement approx. 5.0 x 3.0 x 3.4 About the machine: Offered is a Quaser MV 184 C/10 B machining center with Siemens 828 D control, manufactured in 2016. This machining center is in very good original condition. It comes from a company where it was only used a little for training purposes. It has a very easy-to-use control system. The guides are regularly lubricated by the central lubrication system. The Quaser MV 184 C/10 B has been mechanically and electrically inspected by us. Take advantage of the opportunity to inspect and test the Quaser MV 184 C/10 B on-site while it is powered up. You can find more milling machines from well-known manufacturers on our website.

Condition: like new (used), Year of construction: 2008, SPECIFICATION KB-45 Cutting capacity 455mm Maximum working height 255mm Ndodpfxeu Rdr Ro Akqoc Table 600 x 500 mm Tilt 4 ways up to 15° Saw blade length 3490mm Saw blade width 3-16mm Saw blade speed 25-115m/min Butt welder capacity 3-16mm Motor size 1HP Weight 285 Kgs Height 2020mm Width 1100mm Depth 660mm STANDARD FEATURES Overload switch Single-phase / 3-phase supply Built-in saw blade and tire cleaning brush Saw blade welder, blade shear and grinder Slotting table Low-voltage halogen lamp Mitre guard for angled cuts Quick rip fence for straight cuts

Condition: good (used), Year of construction: 2014, Knuth Sinus 330 x 1500 Knuth Sinus 330 x 1500 lathe, manufactured in 2014, in very good original condition. The machine comes from a special production run by a renowned German machine tool company. CE compliant!! Technical data: Year of manufacture: 2014 Knuth Sinus 330 x 1500 Working area: Workpiece length: 1,500 mm Turning diameter over bed: 660 mm Turning diameter over cross slide: 440 mm Turning diameter without bridge: 900 mm Bridge length: 320 mm Bed width: 400 mm Travel distances: Travel X-axis: 368 mm Travel Z1-axis: 230 mm Swivel range of top slide: 45° Main spindle: Spindle speed: 25 rpm - 1,600 rpm Spindle bore: 105 mm Spindle mounting: D1-8 Spindle taper: ø 113 mm / 1:20 Rapid traverse: Rapid traverse X-axis: 2,000 mm/min Rapid traverse Z-axis: 4,000 mm/min Tailstock: Tailstock spindle diameter: 90 mm Tailstock taper: 5 MK Tailstock quill stroke: 235 mm Tailstock cross slide: ± 12.5 mm Drive power: Motor power, main drive: 7.5 kW Dimensions and weights: Dimensions (L x W x H): 3.21 m x 1.23 m x 1.6 m Weight: 2,800 kg About the machine: The Sinus D is the largest series in the universal lathe segment. Conventional lathes like this are characterized by their robust design and high versatility. The design follows a classic design, but is based on a heavy, one-piece cast machine bed. As with heavy-duty lathes, the power transmission between motor and spindle is also achieved here via a manual lamellar clutch. With integrated functions such as the removable bed bridge, rapid traverse, and a taper turning device, this series offers optional solutions for machining long workpieces or large flanges. One-piece heavy cast bed with high stability Massive headstock with large spindle bearings Rapid traverse in 2 axes for fast positioning Taper turning attachment for additional applications Well-designed safety features You can find more lathes from well-known manufacturers on our website. Ndedpfx Ajz Irwfskqoc

Condition: new, For sale: Lowara vertical pump / New Specifications: - Maximum flow rate: 36000 L/h - 14000 L/h - Maximum head: 39 m - 19 m Njdpfx Aoz Skzyskqodc - Motor power: 4 kW - Rotational speed: 2900 rpm

Condition: excellent (used), For sale: a robust WEMAS column milling machine, model FM23. Cast iron construction, very rigid, ideal for tool rooms and maintenance workshops. The machine is equipped with a 3-axis DRO D60-3V digital position readout and Rascher Nürnberg–München measuring scales. Table with longitudinal T-slots, coolant with a separate tank and pump. Vertical spindle with a precision collet and adjustable feed. Power supply: 3×400 V. The machine is complete, has undergone a recent inspection, runs smoothly, and is ready for testing under power. It shows normal signs of use – without any disqualifying play or looseness. Included in the price: 3-axis DRO display, scales on the X/Y/Z axes, coolant tank and pump, hoses, power cable, work light. Additional information from the photos: “WEMAS” and “FM23” nameplates, spindle setting correction plate, DRO panel with mm/inch functions, ABS/INC, calculator. Njdpfxsz Slaqs Akqedc Working parameters, spindle taper, and speed ranges to be confirmed on-site – I can measure the table and X/Y/Z travels. Loading with a forklift is possible. I can assist with organizing transport.

Condition: excellent (used), Year of construction: 2012, Data: Njdpfx Ajywz H Hekqjdc Ibarmia gantry-type machining center (3 axes) XYZ travel: 3050 x 600 x 900 mm Spindle speed: 12,000 rpm Tool magazine: 60 positions, HSK 63 High-pressure coolant: 60 bar Tool measurement: Renishaw Touch probe: Renishaw Coolant system / band filter Chip conveyor

Condition: like new (used), Year of construction: 2019, Various spare parts for Chiron BAZ Rotary tables Axles Nodpfx Aksz I T Aceqodc Ball screw and more

Condition: used, Year of construction: 2014, x-travel 1600 mm y-travel 820 mm z-travel 700 mm control Heidenhain iTNC530 weight of the machine ca. 7500 kg Ndjdpfx Aks Aaq Tieqjc

Condition: new, Year of construction: 2023, operating hours: 24 h, functionality: fully functional, KOMATECH KT360D – Dual Table HIGH SPEED DUAL TABLE TAPPING CENTER – NEW IN OUR SHOWROOM (YEAR 2023) (0 HOURS SPINDLE RUNNING ) CNC control: FANUC 0i-MF PLUS Manual guide i Electronic handwheel for 3 axis X-axis travel: 520 mm Y-axis travel: 360 mm Z-axis travel: 360 mm Rapid feeds X, Y, Z: 50/50/60 m/min Axis acceleration: 2,4 G Table size /each side: 650x350 mm (2X) Distance table /spindle nose: 200-500 mm Admissible load on table: 200 Kg x2 Pneumatic jig interface on table Spindle speed: 15.000 rpm / direct drive Motor power (S1/S6): 5,5/18 Kw Torque motor (S1/S6): 17,5 Nm/57,3 Nm Spindle oil cooler by independent circuit Spindle cone: BT30 Turret magazine capacity: 21 tools Change tool time: 1,08 sec Max. tool length: 200 mm Cooling pump for external tool cooling Coolant Through Spindle 20 bar Washing down system in working area Chips conveyor scrapper type Metallic full top cover Transformer CE devices and certificate Net weight: 4.300 Kg Nedj Aardcopfx Akqsdc