Used Watchmakers Lathe for sale (5,382)

Condition: ready for operation (used), Year of construction: 1987, Lathe Make Heidenreich & Harbeck type Hanseat 480 YEAR 1987 center height 255 mm turning diameter over support 300 mm center distance 1500 mm 24 speeds from 23.6 to 2500 n1/min tailstock MK 4 chuck F 250 digital display make Heidenhain motor 380 volt 11 kw Lredpfx Aspviqisgvjn transport dimension: length 3200 mm width 1200 mm height 1550 mm Weight 2,5 to.

Condition: good (used), functionality: fully functional, Internal article number: 26060 Lead screw and feed spindle lathe Leinen DLZ 140 + Digital display + Multifix "A" base plate + Three-jaw chuck + Four-jaw chuck Center height: 140 mm Ljdpfozd Txlex Agvorn Distance between centers: 500 mm Spindle speed: 15 - 3100 rpm This machine comes from an educational institution and is in good condition. You are welcome to inspect the machine while it is powered on, in our over 500 m² heated storage area.

Condition: good (used), For sale is the lathe shown in the pictures, manufactured by the German company Weiler, model Primus. The machine is in very good condition. I can arrange for the machine to be loaded on site. Net price + 23% VAT. Chuck: 120 Turning diameter: 240 Lrodpfxszfgcme Agvon Turning diameter over the carriage: 140 Taper in the headstock: MK2 Minimum speed: 150 Maximum speed: 3200 16 spindle speeds Longitudinal and transverse feeds Metric and inch threads Spindle bore: 24 Right and left jaws Steady rest / chuck jaws

Condition: good (used), Year of construction: 1989, Max. turning Ø:1400mm Table Ø: 1200mm Control: CNC Altstohm Cyber 3000 Length: 2700mm Width: 2400mm Height: 3950mm Weight: 0kg Lodpfx Agowvrtuevern

Condition: good (used), Year of construction: 1976, Centre lathe ZERBST - DPS 1800 MACH-ID 581 Make: ZERBST Type: DPS 1800 Year: 1976 Lredpfx Aewvir Iegvon Swing over bed Ø 1600 mm Swing over cross slide Ø 1250 mm Swing in the gap Ø 2100 mm Bed width 1400 mm Power 35 kW Speeds / ranges 180 Rpm

Condition: good (used), turning diameter over bed slide: 1,400 mm, turning length: 5,000 mm, Centre lathe ZERBST - DPS 1400 MACH-ID 582 Make: ZERBST Type: DPS 1400 Year: 1976 DBC Turning Length: 5000mm Swing over bed Ø: 1400mm Swing over cross slide Ø:1250mm Lrsdpfswvirhjx Agvjn Spindle bore: 100mm

Condition: excellent (used), Year of construction: 1987, Carousel lathe SCHIESS FRORIEP - DV DF DZ DKE 1 x set off 4 jaws 410 x 330 x 200 mm MACH-ID 6693 Make: SCHIESS FRORIEP Lredjzc H Uxepfx Agvon Type: DV DF DZ DKE Year: 1987 set off 4 heavy duty jaws for SCHIESS FRORIEP DV DF DZ DKE Jaw width 90 mm Jaw height 75 mm Hole to hole jump length ways 125 mm Hole to hole jump in width 250 mm Length:1200mm Width:800mm Height:400mm Weight:500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), functionality: fully functional, Speed: 21 - 1,500 RPM Maximum turning diameter: 1,000 mm Turning diameter over bed: 520 mm Spindle bore: 71 mm Machine weight (approx.): 2,000 kg Equipment: - Coolant system - Chuck guard - Multifix cassette B (8 pieces) - 315 mm chuck Lrodpfx Aezd Smzjgvjn - Tailstock, MK 5 - Various intermediate sleeves, centers, and drill chucks

Condition: used, Year of construction: 2005, MAZAK QTN 200M, year 2005 Mazatrol Fusion 640T C-axis driven tools Chuck: 200mm Spindle bore: 65mm Turning length: 500mm Turning diameter: 380mm Ledpfx Aszgumvogvjrn 12-position turret Tailstock Measuring probe -Chip conveyor -4 driven toolholders (2/2 configuration) -8 standard toolholders -Machine documentation

Condition: good (used), Year of construction: 2000, functionality: fully functional, Ge Fanuc control 3 jaw 10 inch Pratt and Barnet manual chuck 10HP spindle Quick change tool post Tailstock Coolant tank and tray 6 tool holders Lredozakk Ejpfx Agvon

Condition: used, functionality: fully functional, Genini Miniautomat – automatic lathe Automatic lathe for turning square stock Lrjdszgc Rcspfx Agvsn Hydraulic pump motor with a power of 1.5 kW Maximum length of square stock: 950 mm Maximum turning length: 120 mm Maximum turning diameter: 80 mm Two tool posts with profiling tools 1 front spindle for drilling or front profiling 1 roughing tool Machine weight: approximately 1800 kg CE marking

Condition: used, Year of construction: 1990, functionality: fully functional, Fanuc OT control 3 jaw Kitagawa chuck 620mm swing 1000mm between centres 10 station turret Tailstock Lredpfezakgtsx Agvon Coolant pump and tank Swarf conveyor

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 12020, Fanuc 21i TB control Ljdpfx Ajzaix Isgvorn 3 jaw SMW chuck 720mm swing 2000mm between centres 8 station turret Coolant pump and tank Swarf conveyor

Condition: used, Brand : CMZ Model : TBI 520 MC Cnc : FANUC 18i-TB with Manual guide Yom : 2005 Times operation: 1371h Distance between centres: 1.100 mm Swing over bed: 520 mm Ø Max. Turning: 420 mm X Travel X : 296 mm Z Travel : 1090 mm Rapid Feeds (X, Z Axis): 18 m/min Rapid Feeds (Z Axis): 24 m/min Max Speed of the Head: 3000 rpm Spindle Bar Diameter: 82 mm Lrodozczacjpfx Agvon Chuck Bore Ø: 95 mm Spindle Max. Power : 22 kw Number turret positions; 12 (VDI-50) Number positions of Driven tools 12 Driven Tools Speed 4000 rpm Max Power Driven Tools 8,5 kw C Axis and Driven Tools INCLUDED Hydraulic Steady Rest installation: INCLUDED Tool Presetter INCLUDED 2 Axial Driven Tool Holders INCLUDED 2 Radial Driven Tool Holders INCLUDED Installed Power 50 KVA Equipped with chip conveyor

Condition: used, Year of construction: 2010, Technical details: turning diameter: 1000 / 700 mm turning length: 3000 mm face slide travel: 600 mm turning diameter over slide: 700 mm turning speeds: 1-1.800 1/min transmission ratio: 2 spindle: 46 (60%) kW spindle bore: 132 mm quill stroke: 280 mm workpiece weight max.: 2.560 kg total power requirement: 38 kW weight of the machine ca.: 6 t dimensions of the machine ca.: 5 x 2,6 x 1,9 m teach in lathe, PARAT tooling system, SCHUNK ROTA NC 500-160 hydr. power chuck, tailstock, Lrjdpfxsr U Skhe Agvon chipconveyor *

Condition: excellent (used), Year of construction: 2013, Spinner TC600-65MC cnc lathe with C-axis and driven tools Year: 2013 Technical details: Control SIEMENS 840D-SolutionLine Spindle speed range: 4500 rpm Lodpfx Agoy Sv Egevorn Spindle motor power: 11 kW/ 16.5 kW Torque: main spindle (siemens, s6 40%) 301 Nm X-Axis Movement: 230 mm X-Axis Rapid Traverse: 15 m/min Z-Axis Movement: 740 mm Z-Axis Rapid Traverse: 24 m/min Center distance: approx. 600 mm Max turning diameter: 310 mm Workpiece diameter over bed: 425 mm Number of turrets: 1 Tool taper: DIN 69880/ VDI30 Number of turret stations: 16 Driven tool holder positions: 16 C-axis Speed of rotating tools: 6000 1/min Driven tool power: 6 kW Tailstock: Quill stroke: 120 mm Adjustment travel: 475 mm Machine dimensions: 2730x1500x1620mm Machine weight: 4500 kg Accessories/options: - hydraulic chuck with jaws - collet type chuck with collets - static tool holders - driven tool holders - Renishaw tool measuring arm - Swarf conveyor - High pressure coolant system - Bar feeder - Documentations

Condition: excellent (used), Year of construction: 2008, turning height: 2,600 mm, total height: 9,500 mm, total width: 5,000 mm, total length: 13,500 mm, rotary table diameter: 5,000 mm, Carousel lathe BERTHIEZ - JO-9375 MACH-ID 9648 Lrodpfozcx Ttex Agvsn Make: BERTHIEZ Type: JO-9375 Year: 2008 Displacable table 5000 mm 4 Table jaws 4 Table extentions  Overhauled in 2008 CE-Mark  X Traverse leadscrew replaced Servo engines and Linear scales Under power in North Spain Max. turning Ø: 10500mm Table Ø: 5000mm Single column or double column:Singel Moving table or column: Moving Chuck Speeds / ranges: 60Rpm Maximum turning height: 2600mm Length: 13500mm Width: 5000mm Height: 9500mm Weight: 93000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, HERBERT 9C-30 TURRET LATHE MAKE HERBERT, MADE IN ENGLAND MODEL 9C - 30 Lrsdpfsy H Hc Eex Agvjn MAX DIAMETER OVER BED 762.0 mm CHUCK TYPE 4 JAW CHUCK SIZE 630.0 mm MAX DIAMETER OVER CROSS SLIDE 535.0 mm MAX DIAMETER IN FRONT OF CROSS SLIDE 737.0 mm LENGTH BETWEEN CHUCK FACE -TURRET FACE 1505.0 mm TRAVEL OF TURRET 1066.0 mm DIAMETER OF HOLE THROUGH SPINDLE 125.0 mm SPINDLE SPEED 7 – 600 RPM PLUS OPERATOR SAFETY DOOR GOOD RANGE OF ACCESSORIES

Condition: used, Year of construction: 2003, Technical details: turning diameter over bed: 720 mm turning dia. over face-slide: 430 mm turning length: 2000 mm bed width: 480 mm centre distance: 2000 mm centre height: 360 mm face slide travel: 410 mm control: Siemens Sinumerik 810D Weiler D2 Steuerung revolution per minute: 1 - 1800 U/min spindle diameter: 280 mm spindle bore: 216 mm spindle head: DIN 55026 - Größe 15 max. torque on the spindle: 4300 Nm Lsdpfxjzdn S Hs Agvern tailstock taper ISO: MK 6 tailstock quill stroke: 225 mm tailstock quill diameter: 115 mm total power requirement: 30 kW Weight approx.: 6,2 t dimension machine xH: 4,3 x 2,5 x 1,95 m Oil Country Lathe Special machine for machining long bars and pipes. For sale is an extremely robust and precise WEILER E70 x 2000 heavy-duty lathe, manufactured in Germany to the highest quality standards. The machine is ideally suited for: ·Single-part production ·Repair work ·Toolmaking ·Heavy-duty machining applications in industry The WEILER E70 impresses with its: ·High rigidity and stability ·Large spindle bore capacity ·Excellent torque performance Perfect for machining: ·Large shafts ·Flanges ·Pipes ·Heavy workpieces Tool holder: Multifix size C *

Condition: excellent (used), Year of construction: 2018, - Siemens Sinumerik 828D control system - Accessories: Collet chuck Working area Swinging diameter over bed ø250 mm Swinging diameter over cross slide ø85 mm Maximum turning diameter ø85 mm Maximum turning length 225 mm Maximum bar capacity ø25.5 mm Distance between centers (spindle nose – tailstock center) 405 mm Slide travel range Slide travel X 100 mm Slide travel Z 300 mm Main spindle Spindle mounting (centering flange) ø70 h5 Spindle outer diameter at front bearing ø50 mm Main spindle – clamping system Hollow cylinder chuck (pneumatic) with draw tube with max. capacity ø25.5 mm Max. chuck size ø100 mm Main spindle drive AC motor, power (100%/40% ED) with integrated holding brake for driven tools 3.7 / 5.5 kW Speed range (continuously adjustable) 60-6300 rpm Max. torque 35 Nm Lrjdpfjzdp U Aox Agvon Dimensions Height of turning axis above floor 1130 mm Overall height 1820 mm Footprint (width x depth, without options) 1700 x 1270 mm Weight 1400 kg

Condition: excellent (used), Year of construction: 2004, Control system: Heidenhain Working area Swinging diameter over bed: 320 mm Swinging diameter over carriage: 150 mm Distance between centers: 800 mm Working spindle Spindle mount according to DIN 55027: B6 Spindle bore: 50 mm Spindle taper, metric: 60 Main drive Motor power at speed 1500 min-1: 7 kW Spindle speed range, 1st gear: 0 - 1000 min-1 Spindle speed range, 2nd gear: 20 - 4000 min-1 Max. spindle torque 1st gear: 360 Nm 2nd gear: 90 Nm X-axis Max. travel: 190 mm Rapid traverse: 5000 mm/min Max. feed force: 3000 N Z-axis Max. travel of bed carriage: 750 mm Rapid traverse: 8000 mm/min Max. feed force: 5000 N Lrsdpfszdp Txex Agvjn Quick-change tool holder MULTIFIX B Max. steel diameter: 25 x 25 mm Tailstock Diameter of quill: 65 mm Quill travel: 120 mm Internal taper of quill – Morse: 4 Machine dimensions Length: 2180 mm Width: 1341 mm Height: 1775 mm Machine weight: 2150 kg Power requirement: 21 kVA

Condition: good (used), Conventional lathe, Pinacho model ML 18-250, year 2019. Distance between centers: 1,500 mm, main spindle bore: 58 mm, chuck diameter: 250 mm, swing over bed: 502 mm, bed width: 300 mm, Fagor Innova digital readout. Lrodpfjzcxnwex Agven

Condition: like new (used), functionality: fully functional, chuck outer diameter: 1,250 mm, 4-Jaw Lathe Chuck BISON Ø 1250 mm, A15 Mount – almost new For sale: 4-jaw independent lathe chuck from renowned manufacturer BISON, diameter 1250 mm. Lrodpsy Exqxefx Agvon Designed for heavy-duty industrial applications, suitable for large conventional and CNC lathes. Technical data: Manufacturer: BISON Type: 4-jaw independent chuck Diameter: 1250 mm Mounting: A15 taper Condition: almost new Description: High-quality lathe chuck ensuring precise clamping of large workpieces. Each jaw is independently adjustable – perfect for machining irregular shapes. Available from stock.

Condition: used, functionality: fully functional, turning height: 2,500 mm, turning diameter: 5,000 mm, table load: 127,000 kg, table diameter: 4,500 mm, Vertical Turning Lathe KOLOMNA 1550 Vertical turning lathe KOLOMNA 1550 available for sale, designed for machining large and heavy workpieces. A robust and reliable machine suitable for heavy industry, power generation, and large-scale manufacturing. The machine is available for inspection upon prior arrangement. Technical specifications: Lsdpfeywvciox Agvern Table diameter: 4,500 mm Max. turning diameter: 5,000 mm Max. turning height: 2,500 mm Max. table load: 127 tons Machine weight: 140 tons Additional information: Transport can be arranged Technical support and consulting available

Condition: used, Year of construction: 1984, functionality: fully functional, turning height: 3,200 mm, workpiece weight (max.): 125,000 kg, turning diameter: 8,000 mm, rotary table diameter: 7,100 mm, Vertical Turning Lathe KOLOMNA 1580 L Heavy-duty vertical turning lathe KOLOMNA 1580 L available for sale, designed for machining large-scale and heavy workpieces. Robust construction makes it ideal for heavy industry, power generation, shipbuilding, and large component manufacturing. The machine is available for inspection upon prior arrangement. Technical specifications: Max. turning diameter: 8,000 mm Max. turning height: 3,200 mm Max. workpiece weight: 125,000 kg Table diameter: 7,100 mm Max. ram stroke: 2,000 mm Max. cross rail travel: 4,275 mm Table speed range: 0.22 – 20.1 rpm Table feed range: 0.0352 – 285 mm/min Ram feed speed: up to 2,500 mm/min Cross rail vertical travel speed: 300 mm/min Machine dimensions (L × W × H): 8,615 × 17,600 × 9,800 mm Lodpfxeywu U Re Agvern Machine weight (incl. electrical equipment): 258,000 kg Additional information: Transport can be arranged Technical support and consulting available