Used Weiler E 50 for sale (201)

Condition: used, turning diameter over bed 370 mm turning diameter over slide rest 200 mm turning length 1000 mm centre height 185 mm spindle bore 56 mm tailstock quill taper MT 4 turning speeds 50 - 2000 U/min power capacity 4,0 kW weight of the machine ca. 1,4 t Ndodpfx Afsxfwckouob dimensions of the machine ca. 2,3 x 1,1 x 1,3 m Center lathe 200mm three-jaw chuck Size B Multifix tool post 3 Multifix tool holders Emergency stop device

Condition: used, Year of construction: 1971, turning diameter over bed 297 mm turning diameter over bed slide 160 turning length 500 mm short taper holder Größe 5 spindle bore 36 mm spindle turning speed range 30-3550 U/min number of speeds 18 quill adjustment 90 mm tailstock quill taper MT 3 cross adjustment +15 tailstock adjustment - manual 500 mm weight of the machine ca. 610 kg dimensions of the machine ca. 1,4 x 0,7 x 1,2 m cessories: Forkardt V-block chuck, Ø 160 mm Collet chuck, Collets (see photo) Steel Multifix system, size A Nsdpfx Afjy Hxp Djuodb with 3 quick-change inserts rotating center point chip guard chuck guard fixed steady rest The machine comes from the training workshop of a renowned German corporation.

Condition: good (used), Centre distance: 450 mm Centre height: 120 mm Spindle bore: 23 mm Speed: 40 – 3000 rpm Infinitely variable drive with 3 gearbox stages and digital speed display Tailstock: MT 2 Drive power: 1.5 kW Weight: 350 kg Dimensions: 1200 x 650 x 1330 mm Paint: Reseda green RAL 6011 Njdpfx Afjw I A Uxouodb Digital display: Optional at extra cost Accessories: Further accessories available on request

Condition: used, turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm Nsdpfxsxacgdo Afusdb tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - very good condition (!!) regularly receive a WEILER factory service particularly suitable for medium-precision turned parts Equipment: - robust lead/pull spindle lathe - KLOPFER four-jaw chuck Ø 140 mm - KLOPFER three-jaw chuck Ø 140 mm - collet holder with lots of collets - foldable lathe chuck guard - chuck key - MULTIFIX steel holder A, with 3x new inserts - movable tailstock - control panel, front left - automatic feeds for face and top support - pole-changing drive motor - machine base frame, with cabinet door (storage area) - chip splash guard rear wall - emergency stop button, bottom right - machine swing feet - original operating instructions

Condition: excellent (used), functionality: fully functional, Provisur Weiler 878 grinder, 50hp model. Greta machine for burger, sausage, Petfood manufacturer. Can mince fresh or frozen flaked meat. Extended hopper. Nsdox Av Rujpfx Afusdb

Condition: used, turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - very good condition (!!) regularly receive a WEILER factory service particularly suitable for medium-precision turned parts Equipment: - robust lead/pull spindle lathe - KLOPFER four-jaw chuck Ø 140 mm - KLOPFER three-jaw chuck Ø 140 mm - collet holder with lots of collets - foldable lathe chuck guard - chuck key - MULTIFIX steel holder A, with 3x new inserts - movable tailstock - adjustable bed stop Njdpfx Afoxacirousdb - control panel, front left - automatic feeds for face and top support - pole-changing drive motor - machine base frame, with cabinet door (storage area) - chip splash guard rear wall - emergency stop button, bottom right - machine swing feet - original operating instructions

Condition: used, machine/vehicle number: 1717, Used lead and feed screw lathe WEILER PRAKTIKANT Centre height: 140 mm Nedouqb Emopfx Afuodb Distance between centres: 500 mm Spindle bore: 36 mm Spindle speeds: 42–2,000 rpm Equipped with RSF 3-axis digital readout, 1 pc 3-jaw chuck Ø160 mm, Chuck guard electrically interlocked, With Multifix toolpost size A with 3 holders Lever-operated collet device with 15 collets. The machine is located at our facility in 71334 Waiblingen-Beinstein and is immediately available. Viewing of the machine is possible by prior arrangement.

Condition: used, turning length 800 mm turning diameter 280 mm turning diameter over slide rest 150 mm spindle bore 42.0 mm tailstock quill taper MT 3 MK bed width 208 mm turning speeds 42 - 2022 U/min spindle taper DIN 55027/5 quill stroke 90.0 mm voltage 380 V Ndjdpfx Asxacg Refusb total power requirement 3.0 kW weight of the machine ca. 750 kg range L-W-H 1800 x 800 x 1250 mm Due to its design (type, performance, feed rates, etc.) it can be used successfully in training workshops, but also for toolmaking and repair shops. Equipment: - robust conventional lead/spindle lathe - WMW 3-jaw chuck Ø 150 mm - faceplate 280 mm - MULTIFIX quick-change holder, with insert - movable tailstock - chuck key - machine base with storage area - pole-changing drive motor - operating instructions

Condition: used, turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - very good condition (!!) regularly receive a WEILER factory service particularly suitable for medium-precision turned parts Equipment: - robust lead/pull spindle lathe - KLOPFER four-jaw chuck Ø 140 mm - collet holder with lots of collets - chuck key - MULTIFIX steel holder A, with 3x new inserts - movable tailstock Nodpfx Afexaccxsuedb - adjustable bed stop - control panel, front left - automatic feeds for face and top support - pole-changing drive motor - machine base frame, with cabinet door (storage area) - chip splash guard rear wall

Condition: good (used), Centre height: 125 mm Distance between centres: 800 mm Max. turning diameter over bed/over slide: 280/245 mm Spindle mount, thread according to DIN 800 Spindle bore: 24 mm Infinitely variable spindle speeds: 26 - 2000 rpm Nsdpfxsyu R H Ne Afuodb 36 longitudinal feeds: 0.019 - 0.528 mm Metric thread pitches: 0.25 - 6 mm 44 inch threads: 4 - 112 TPI Electrical connection: 380 V, 0.7/1.4 kW Required space: Approx. weight: 500 kg

Condition: ready for operation (used), turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V Nedpjxq Hhysfx Afujdb weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - in very good condition (!!) particularly suitable for medium-precision turned parts Features: - Robust lead/feed screw lathe - RÖHM three-jaw chuck Ø 160 mm - Foldable lathe chuck guard - Chuck key - MULTIFIX steel holder A, with 3x new inserts - Movable tailstock - Swiveling machine light - Control panel, front left - Automatic feeds for face and upper support - Machine base, with cabinet door (storage space) - Chip splash guard rear panel - Emergency stop button - Operating instructions

Condition: good (used), 1 used lead and feed screw lathe Make: Weiler Model: Condor VS 2 Technical Data: Centre height: 160 mm Centre distance: 800 mm Spindle bore: 40 mm Bed width: 240 mm Speeds: 12 - 2800 rpm Drive power: 3 kW Tailstock taper: MK 3 Nedow Rcrcopfx Afusdb Quill stroke: 110 mm Feeds: 0.037 - 1.253 mm/rev Weight, approx.: 800 kg Dimensions (W x D x H), approx.: 1930 x 880 x 1470 mm Equipment: 3-jaw chuck Quick-change toolholder system Multifix

Condition: used, Year of construction: 1986, turning diameter over bed:320 mm turning diameter over slide rest:198 mm turning length:650 mm total power requirement:2,2 kW weight of the machine ca.:650 kg dimensions of the machine ca.:1700x1000x1700 mm :3 - Achsen - Digitalanzeige :Ø 40 mm :96 - 2500 U/min :A 2 - 5 :0,007 - 0,63 mm/U Ndjdpfx Afsufud Djusb :metrisch 0,25 - 8 mm,Zoll 80 - 2 Gg/",Diametral - Pitch Gewinde 200 - 5 Dp,Modul 0,2 - 4 :MK 3 3-jaw chuck:160 mm mm :Typ B

Year of construction: 1973, condition: excellent (used), turning length 125 mm Njdpfx Afsxpxqwousdb weight of the machine ca. 0,4 t

Condition: good (used), Center distance: 800mm Spindle clearance: 38mm Center height: 165mm Turning diameter over bed: 330mm Turning diameter over slide: 170mm Speed: 24-2800 Dimensions: 1600mm x 600mm x 1250mm Ndodpfx Aoukrtnefueb Weight: 850 kg

Condition: good (used), Weiler lathe Turning diameter bed: 280 mm Turning diameter support: 180 mm Turning length: 800 mm Spindle bore: 24 mm Speed max: 1600 RPM Diameter faceplate: 140 mm Ndjdpfol Ayd Rsx Afusb Included tools and coolant pumpe Dimensions: 156x70x133 cm LxWxH

Condition: good (used), Year of construction: 1988, 1 used lead and feed screw lathe Make: Weiler Model: 160 B Year of manufacture: 1988 Technical specifications Nsdpew Sdr Hjfx Afusdb Centre distance: 650 mm Swing over bed: 320 mm Swing over cross slide: 192 mm Centre height: 160 mm Spindle bore: 40 mm Rated power: 2.4 / 3 kW Spindle speeds: 48 – 2500 rpm Dimensions: approx. L 2.20 x W 1.10 x H 1.40 m Weight: approx. 1 t Equipment Heidenhain digital readout Multifix toolholder with various inserts 3-jaw chuck Emergency stop

Condition: used, turning diameter over bed 250 mm turning diameter over slide rest . mm centre distance ca. 400 mm centre height ca. 125 mm turning speed range 80 - 3000 U/min number of speeds 18 spindle bore 24 mm Nedpfowa Dz Eox Afujdb tailstock quill taper MT 3 weight ca. 400 kg dimensions ca. 1200 x 650 x 1300 mm 4-jaw-chuck diameter 125 mm including Röhm four-jaw chuck, Ø 125 mm incl. drilling and turning jaws; collet chuck device incl. collets 1-20 mm with 1 mm gradient Multifix size A with 3 interchangeable holders; chuck protection with shutdown

Condition: reconditioned (used), Year of construction: 1974, Universal lead and spindle lathe Make: WEILER Model: Commodor Year of manufacture: 1974 - overhauled newly painted RAL 7035 light gray Mach. no.: 0068 Center height: 180 mm Center width: 1000 mm Spindle bore: 56 mm with guarantee geometric acceptance with test report Accessories: Ndjdpfx Afemgaddousb - 3-axis digital display FAGOR Innova 30i-T new - Chuck protection hood with electrical protection - Quick-change tool holder size B - simple bed stop - Coolant device - Operating instructions - used, as seen -

Condition: new, Year of construction: 2025, GSD Intern One of the best-selling and most popular conventional precision lathes Impressive thanks to: Sophisticated technology Highest accuracy Durability Proven ergonomics Minimal footprint And extensive accessories. Proven for decades in single-part and small-batch production, in trade and industry, training and continuing education, and tool and fixture construction. Distance between centers 650 mm Center height 160 mm Automatic handwheel disengagement Leadscrew and feed screw covers Main spindle brake Toolmaking precision according to DIN 8605 Pole-changing brake motor Headstock gearbox 16 fixed speed levels Numerical position display (option) LED machine light TECHNICAL DATA: WORKING AREA Center height 160 mm Swing over bed 320 mm Swing over cross slide 190 mm Distance between centers 650 mm TURNING SPINDLE Spindle head DIN 55027/DIN ISO 702-3 Gr. 5 Spindle bore 43 mm Spindle diameter in front bearing 70 mm MAIN DRIVE Drive power 60%/100% duty cycle 2.6 / 3.1 kW Speed range 48 – 2,500 rpm Njdpjwhzcpefx Afusdb Number of speeds 16 FEED RANGE Number 24 Longitudinal 0.02 – 0.63 mm/rev Cross 0.006 – 0.2 mm/rev THREADING RANGE Metric threads 0.25 – 8* mm TAILSTOCK Quill diameter 40 mm Quill stroke 85 mm Internal taper DIN 228 MK 3 ACCEPTANCE ACCURACY DIN 8605 * Inch threads and metric thread pitches 0.45; 0.75; 4.5 and 5.5 are only available with additional change gears. This machine is located in our showroom in 71334 Waiblingen-Beinstein and is available immediately. Please contact us regarding the available options.

Condition: reconditioned (used), Year of construction: 1990, Universal lathe with guide and lead screw Manufacturer: WEILER Model: Praktikant 160 B Year of manufacture: 1990 - overhauled Newly painted RAL 7035 light gray Machine no.: 90-160-2054 Center height: 160 mm Distance between centers: 650 mm Geometric inspection with test report Accessories: - 3-axis digital display FAGOR Innova 30i T - Covered guide and lead screw - Brake motor - Coolant system Njdpehy Tdysfx Afuedb - Electrically secured chuck guard - Quick-change tool holder size A - Simple bed stop - Chip guard - Operating manual With warranty Used, as is The machine is technically in the condition corresponding to its original year of manufacture.

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, For sale is a lathe made by Weiler, type Primus LZ-GS. Nedsihig Ispfx Afujdb The machine is in very good condition. Technical data: Year of manufacture: 1989 Machine no.: 4443 Operating voltage: 380 V Center height: 120 mm Distance between centers: 430 mm Spindle speed: 60 - 3000 rpm in 18 gear stages Spindle bore: 23 mm Short taper spindle head, DIN 55027 Tailstock: MK 2 Feeds from 0.03 to 0.15 mm/rev Possible threads: Metric, inch, module, and diametral pitch Metric thread pitches from 0.25 to 2.5 mm Length: 1.2 m, height: 1.3 m, depth: 0.65 m Prices are plus VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange possible! Machine buying and selling WE BUY/SELL PRODUCTION & METALWORKING MACHINES, ETC. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, please visit our website.

Condition: reconditioned (used), Year of construction: 1989, Universal lathe with guide and lead screw Manufacturer: WEILER Model: Condor B Year of manufacture: 1989 - overhauled Newly painted RAL 7035 light grey Machine no.: 1401 With guarantee Accessories: - 3-axis digital display FAGOR Innova 30i T, new - Chuck guard with electrical safety device, new - Quick-change tool holder base body, size B Nodpfx Afog R S Rcouodb - Bed stop - Coolant system - Chip guard - Operating manual -used, as is -

Condition: new, Trainee VCD One of the best-selling and most popular conventional precision lathes impresses with sophisticated technology maximum accuracy long service life tried and tested ergonomics minimum space requirement and a wide range of accessories. Proven for decades in single part and small series production, in trade and industry, training and further education, tool and jig construction. Equipment: Center width 650 mm Center height 160 mm Automatic handwheel disengagement Lead and traction spindle cover Holding brake Toolmaking accuracy according to DIN 8605 Njdpfx Afetznareuedb Infinitely variable speed control with maintenance-free three-phase asynchronous motor Speed-controlled frequency converter with actual value feedback Speed can be optimized precisely and continuously during machining Best cutting conditions for the finest surfaces in the shortest possible time The numerical position display (optional) offers a high level of operating convenience for working at a constant cutting speed. cutting speed, freely selectable speed limitation, oriented main spindle stop LED machine light Technical data WORKING AREA Center height 160 mm Swing diameter over bed 320 mm Swing diameter over facing slide 190 mm Center width 650 mm TURNING SPINDLE Spindle head DIN 55027/DIN ISO 702-3 size 5 Spindle bore 43 mm Spindle diameter in front bearing 70 mm MAIN DRIVE Drive power 60 %/100 % ED - / 6 kW Speed range 30-4,000 (5,000) min-1 Number of speeds infinitely variable FEED RANGE Quantity 24 Longitudinal 0.02 - 0.63 mm/rev Plan 0.006 - 0.2 mm/rev THREAD CUTTING RANGE Metric thread 0.25 - 8* mm REITSTOCK Quill diameter 40 mm Quill stroke 85 mm Internal taper DIN 228 MK 3 Equipped with: -Quick-change tool holder Multi-Suiss size B -18 liter coolant unit incl. coolant pump The machine is located in our showroom in 71334 Waiblingen-Beinstein and is available immediately. Please contact us regarding equipment.

Condition: used, Year of construction: 1970, Weiler lathe with tailstock. Ndsdpfx Afjhtnu Tjusb