Used Weiler Lz 220 for sale (193)

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Weiler Praktikant 160 B, lathe with guide and draw spindle, year of manufacture 2000, with 3-axis digital display K&C, NEW, CE marking!! Technical data: >> Year of manufacture 2000, machine no. 4651 >> Center height 160 mm >> Distance between centers 650 mm >> Spindle speeds: from 24 to 2500 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.02 to 0.63 mm/rev >> Possible threads: metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg >> Spindle brake can be switched on Gsdpfx Aj Afxq Sebhjui >> Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and equipment: >> 3-axis digital display from K&C, new, 12 months manufacturer's warranty, with operating manual Functions: switching mm/inch, coordinate selection ABS/INC, halving the display value, reference mark, tool programming 200 pieces, taper calculation, radius/diameter, quick zeroing, switching the counting direction >> Quick-change tool holder, collets from 2 to 28 mm, increasing in 1 mm steps >> 3-jaw chuck 160 mm Röhm with 2 sets of jaws >> Mulifix size A with 2 steel holders >> Electric chuck guard >> Bed stop, drill chuck >> Back wall >> Machine feet >> Coolant system >> Operating manual, parts list (PDF) About the machine: Offered is a Weiler Praktikant 160 B lathe with guide and draw spindle, year of manufacture 2000, in very good condition. The machine is fully functional and has CE marking. All slides run very smoothly and evenly. The Weiler comes from a training workshop. Even at high speeds, the Weiler runs smoothly. This newer generation of Weiler lathes is very user-friendly and allows for the production of surfaces that appear to be ground. Take the opportunity to inspect this machine on site and under power to convince yourself of its condition.

Condition: good (used), Year of construction: 1997, operating hours: 10,216 h, functionality: fully functional, turning diameter over cross slide: 200 mm, turning length: 300 mm, spindle bore: 32 mm, spindle speed (max.): 8,000 rpm, spindle speed (min.): 50 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 345 mm, spindle motor power: 11 W, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, rotational speed (min.): 50 rpm, rotational speed (max.): 8,000 rpm, feed length X-axis: 200 mm, feed length Z-axis: 300 mm, feed rate X-axis: 12 m/min, feed rate Z-axis: 12 m/min, type of input current: AC, torque: 73 Nm, swing diameter over bed slide: 445 mm, chuck outer diameter: 140 mm, spindle nose: DIN55026 Gr. 5, Equipment: documentation/manual, Due to restructuring measures, we are selling our Weiler DZ32 CNC lathe. - Year of manufacture: 1997 - Second owner (previously used in a training workshop) - Very good condition for its age - Very few operating hours - total running hours: 10,216 h - Siemens Sinumerik 820 (GA3) T control with C-axis - Max. turning diameter: 230 mm / max. turning length: 300 mm - Main spindle: 8,000 rpm - Counter spindle: 5,000 rpm - 3-jaw hydraulic chuck Röhm 140 mm for main spindle - Additional collet chuck for main spindle - Collet chuck for counter spindle - Drive power: 11.5 kW - Sauter tool holder with 16 driven tools (max. 4,000 rpm) - Tool holder size: VDI 20 - Chip collection tray (hydraulic) - With substructure for height adjustment Gujdpfozzcfpjx Abhei - Fully functional - Many tool holders available, also with drive; these can be purchased depending on the price. - Complete operating and programming documents (German) - Spare parts and service available from Weiler - Machine can be inspected in our workshop while powered on This offer is non-binding. Subject to prior sale. No online sales. The sale is only to commercial customers after an on-site inspection and acceptance. Due to the age of the machine, the sale is made without any warranty. Pick-up only (EXW) - no shipping.

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, Weiler Commodor lathe with lead screw and tailstock, equipped with a 3-axis digital display Heidenhain ND780. In very good condition!!! Technical data: >> Year of manufacture 1991, Machine No. 3120 >> Center height 180 mm >> Distance between centers 1000 mm >> Spindle speeds: from 13 to 2000 rpm >> Spindle bore 56 mm >> Short taper spindle head DIN 55027 size 6 with bayonet lock >> Tailstock MK 4 >> Feeds from 0.026 to 0.888 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.35 to 12 mm >> Weight approx. 1500 kg >> Spindle brake can be switched on >> Drive power 2.0/4.0 kW >> Length 2.2 m, height 1.5 m, depth 1 m Accessories and equipment: >> 3-axis digital display from Heidenhain ND780 >> 3-jaw chuck 200 mm, 1 set of jaws >> Mulifix size B with 2 steel holders >> Drill chuck >> Bed stop >> Machine feet Gusdpe Agnrgjfx Abhei About the machine: Offered is a Weiler Commodor lathe in very good, fully functional condition. The machine comes from a state-owned company where it was used very little. The Commodor is one of the largest manual lathes manufactured by Weiler. A very robust and powerful machine. The 3-axis digital display from Heidenhain makes working with it even easier and more precise. The machine has been electrically and mechanically inspected by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to inspect and test this machine on-site while it is powered up.

Condition: good (used), Year of construction: 1997, operating hours: 33,000 h, functionality: fully functional, machine/vehicle number: 323, turning diameter over cross slide: 200 mm, turning length: 950 mm, turning diameter: 410 mm, spindle bore: 54 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 1 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 950 mm, spindle motor power: 7,500 W, rotational speed (min.): 1 rpm, rotational speed (max.): 3,000 rpm, total height: 1,700 mm, total length: 2,300 mm, total width: 1,400 mm, quill travel distance: 120 mm, quill diameter: 65 mm, quill stroke: 120 mm, swing diameter over cross slide: 200 mm, feed rate Z-axis: 10 m/min, turning diameter over bed slide: 410 mm, turning diameter over top slide: 200 mm, type of input current: three-phase, torque: 700 Nm, overall weight: 2,100 kg, swing diameter over bed slide: 410 mm, bar passage: 54 mm, swing diameter over top slide: 200 mm, spindle nose: DIN 55027 Size 6 type, center height: 200 mm, bar diameter (max.): 54 mm, travel distance cross slide: 230 mm, Equipment: rotational speed infinitely variable, 1997 Weiler E35 Cycle-Controlled CNC Lathe Used 1997 Weiler E35 CNC / Cycle-Controlled Lathe for Sale – Weiler D1 Control – 410mm Swing – 54mm Spindle Bore – 3,000rpm – 10 Tool Holders Manufacturer: Weiler Model: E 35 Machine Type: CnC Lathe Year: 1997 Condition: Working Well Machine Description The Weiler E35 is a high-quality German-built precision lathe combining the flexibility of a conventional centre lathe with the productivity of CNC/cycle-controlled machining. This machine is equipped with the Weiler digital conversational cycle control, allowing straightforward manual machining as well as programmed turning cycles for repeat work, tapers, radii and other common turning operations. With approximately 410mm swing over the bed, 54mm spindle bore and spindle speeds up to 3,000rpm, the E35 is particularly well suited to precision engineering, toolroom work, maintenance departments, repair work and small-to-medium batch production. The machine has approximately 33,000 power-on hours and is supplied with 10 quick-change toolpost holders. Main Specifications Manufacturer: Weiler Werkzeugmaschinen Model: E35 Year: 1997 Serial Number: 323 Machine Type: Cycle-Controlled / CNC Centre Lathe Control: Weiler Digital Cycle Control / D1-type control Power-On Hours: Approx. 33,000 hours Turning Capacity Swing Over Bed: 410mm Swing Over Cross Slide: 200mm Centre Height: 200mm Spindle Bore: 54mm Maximum Chuck Diameter: 250mm Faceplate Diameter: 355mm Distance Between Centres: 950mm Spindle Spindle Speed Range: 1–3,000rpm Spindle Power: 7.5kW Maximum Spindle Torque: 700Nm Spindle Bore: 54mm Godps Agu A Ssfx Abhjui Spindle Internal Taper: MT6 Spindle Nose: DIN 55027 Size 6 type The combination of a 54mm spindle bore and substantial torque makes the E35 suitable for both precision finishing and heavier general turning work. Weiler Cycle Control The machine is fitted with the Weiler conversational cycle control, designed to make CNC turning accessible without requiring full conventional G-code programming for every job. The control provides functions for operations such as: Straight turning Facing Taper turning Radius turning Threading Positioning Feed control Spindle speed control Repetitive machining cycles Manual machine operation Conversational cycle programming This type of control makes the E35 particularly attractive to toolrooms and general engineering workshops where both one-off components and repeat batches are produced. Feed & Axis Performance Longitudinal Feed Range: 0.001–20mm/rev Cross Feed Range: 0.001–20mm/rev Longitudinal Rapid Traverse: 10m/min Cross Rapid Traverse: 5m/min Cross Travel: 230mm Tailstock Tailstock Taper: MT4 Tailstock Quill Diameter: 65mm Tailstock Quill Stroke: 120mm The tailstock allows the machine to support longer workpieces and carry out drilling, reaming and centre-working operations. Tooling Included The machine is supplied with: 10 quick-change toolpost holders Electrical Specification Operating Voltage: 400V Frequency: 50Hz Connected Load: 10kW Nominal Current: 18A Control Voltage: 24 / 230V Approximate Machine Dimensions Overall Length: 2,300mm Overall Width: 1,400mm Overall Height: 1,700mm Machine Weight: 2,100kg Please Note: All specifications, dimensions, capacities, speeds and machine details quoted above are approximate and are provided for guidance only.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Weiler Praktikant 160 B guide and pull spindle lathe with 3-axis digital display from K&C, from a vocational school. Technical data: >> Year of manufacture 1992, machine no. 92 160 3220 >> Center height 160 mm >> Center distance 650 mm >> Spindle speeds: from 24 to 2500 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027, size 5 with bayonet lock Gedpfxs Afyg Ns Abhsui >> Tailstock MK 3 >> Feeds from 0.02 to 0.63 mm/rev >> Possible threads: metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg >> Spindle brake can be activated >> Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and equipment: >> 3-axis digital display from K&C with operating manual Functions: Switching mm/inch, ABS/INC coordinate selection, halving the display value, reference mark, tool programming 200 items, taper calculation, radius/diameter, quick zeroing, switching the counting direction, >> 3-jaw chuck 160 mm with 2 sets of jaws >> 4-jaw chuck with 2 sets of jaws >> 3-jaw chuck with individually adjustable jaws >> Multifix A with 2 steel holders >> Bed stop, drill chuck >> Electronic spindle protection >> Rear panel >> Coolant system >> Operating manual, parts list About the machine: Offered is a Weiler Praktikant 160 B guide and pull spindle lathe, manufactured in 1992 with toolmaker precision, in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and allows surfaces to be produced that are as smooth as ground. Take advantage of the opportunity to inspect this machine on-site while it is powered and convince yourself of its condition.

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, Weiler Praktikant 140 B, lead and draw spindle lathe with toolmaker precision, manufactured in 1988, with a new 3-axis digital display from K&C!!!!! Technical data: >> Year of manufacture 1987, machine no. 87-140-751 >> Center height 140 mm >> Distance between centers 650 mm >> Spindle speeds: from 24 to 2500 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.02 to 0.63 mm/rev >> Possible threads: metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg >> Spindle brake can be activated >> Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and equipment: >> New 3-axis digital display from K&C, 12 months manufacturer's warranty with operating manual Functions: Switching mm/inch, coordinate selection ABS/INC, halving the display value, reference mark, tool programming 200 items, taper calculation, radius/diameter, quick zeros, switching the counting direction. >> Quick-change tool holder, collets from 2 to 28 mm in 1 mm increments >> 3-jaw chuck 160 mm Weiler with 2 sets of jaws >> Mulifix size A with 2 steel holders Gsdps Afx R Hofx Abhoui >> Coolant system >> Machine feet >> Bed stop >> Splash guard >> Operating manual, parts list About the machine: Offered is a Weiler Praktikant 140 B lead and draw spindle lathe in good condition. This very nice lathe is fully functional, of course. The machine comes from a research center. All slides run smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and allows surfaces to be produced that appear to be ground. Take advantage of the opportunity to inspect this machine on-site while it is powered up and to convince yourself of its condition.

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Weiler high-precision lathe, model Condor 81, with lead and pull spindle, featuring a 3-axis digital display, Heidenhain ND780, from a training workshop. Technical data: >> Year of manufacture: 1988, Machine No. 88-955 >> Center height: 165 mm >> Distance between centers: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle head, DIN 55027, size 5, with bayonet lock >> Tailstock: MK 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake can be activated >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories and equipment: >> 3-axis digital display, Heidenhain ND780 >> 1 three-jaw chuck, new, with 2 sets of jaws >> Collet chuck system, collets from 3 to 30 mm, 40 collets, some in duplicate >> Mulifix size B with 3 steel holders >> Bed stop >> Machine feet >> Drill chuck >> Follower rest For safety: >> Guard for the lead and pull spindle >> 2 emergency stop buttons >> Spindle brake About the machine: Gsdo Afxx Hjpfx Abhoui For sale is a used Weiler Condor 81 lathe, manufactured in 1988, in very good condition. The machine is fully functional. The lead and pull spindle are equipped with a guard for safety. This Weiler lathe comes from a training workshop. It is a very robust and powerful machine. The 3-axis digital display from Heidenhain makes operation even easier and more precise. The machine has been electrically and mechanically inspected by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to inspect and test this machine on-site while it is powered up.

Condition: ready for operation (used), functionality: fully functional, WEILER COMMODOR from vocational school / technical college - identification -Guides in good condition -Technical college identification -Good working condition -Maximum turning height 180mm -Maximum turning diameter 1000mm -Bar capacity 56mm -Speed range (gearbox) 56 - 2000 rpm -Automatic longitudinal / facing feeds -Threading / Metric / Inch, etc. -Tailstock MK4 -Three-jaw chuck approx. 200mm -ELECTRIC CHUCK GUARD -SPINDLE COVERS -2 x Emergency stop -Multifix base and inserts Gedsz R Dn Aepfx Abhoui -Coolant system -Chip guard -Work light -Documentation Dimensions: L x W x H 2.5 x 1.3 x 1.7 meters / Weight 1500kg Errors and omissions excepted.

Condition: used, Year of construction: 2018, operating hours: 8,563 h, functionality: fully functional, WEILER E 30 X 750 Cycle Turning Machine (2018) Manufacturer: WEILER Type: E 30 X 750 Cycle Turning Machine Year of manufacture: 2018 Condition: Used Gjdpjzy Sr Nefx Abhsui Operating hours: 8563 h

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, L & Z lathe / WEILER CONDOR AC / Stepless speed control / FROM AN EDUCATIONAL INSTITUTION - CE marking - Year of manufacture: 2000 Godpfx Aez Izi Debhoui - Swing over cross slide: 180 mm - Distance between centers: 165 mm - Max. swing: 330 mm - Turning length: approx. 800 mm - Speed (stepless): max. 2800 rpm - Automatic longitudinal / cross feeds - Threading / Metric / Inch etc. - 3-jaw chuck - Tailstock - Chip guard - Machine light - Multifix base and 6 inserts - Various change gears - Coolant system - Various operating tools - Documentation Dimensions: L x W x H: 1.8 x 1 x 1.8 meters / Weight: 1300 kg Errors and omissions excepted.

Condition: used, functionality: fully functional, Mechanic’s lathe Manufacturer: WEILER, Model series: MDU 260 Technical data Manufacturer: Weiler Type: MDU 260 Distance between centers: 500 mm Center height: 125 mm Swinging diameter over bed: 260 mm Swinging diameter over carriage: approx. 150 mm Speed range: 110 to 3,600 rpm Spindle bore: 28 mm Dimensions: approx. L 1.10 x W 0.50 x H 1.20 m Weight: approx. 350 kg Equipment • Collet set • Drill chuck • 3-jaw chuck, 2 sets of soft jaws • Multifix holder Guedpo Ahql Ijfx Abhei • 2nd drawbar + set of collets • Following center • Various HSS tools All information without guarantee. A demonstration under power is possible at any time in our showroom.

Condition: used, Year of construction: 2011, centre height 280 mm centre distance 1000 mm turning diameter over bed 570 mm turning diameter over slide rest 340 mm turning length 1000 mm spindle head A8 DIN55027 spindle diameter 1 mm spindle bore 83 mm torque 1600 Nm turning speed range 1-2500 (2 Stufen) U/min worktool system Multifix C face stroke 340 mm rapid power traverse in X-and Z direction 5 / 10 m/min feed Z / X m / U feeding dorce 10000 / 7000 N tailstock quill diameter 80 mm tailstock quill stroke 160 mm tailstock quill taper ISO MK 5 total power requirement 15 kW Weight 3550 Kg dimensions of the machine ca. 3,85 x 2,30 x 1,80 m WEILER D3 Control Unit (SIN810D), Gjdpfxoz I T Raj Abhjui Three-Jaw Chuck Multifix C Steel Holder, Chip Conveyor, Various Interchangeable Jaws MULTIFIX C Quick-Change Steel Holders

Condition: used, Year of construction: 1996, operating hours: 22,400 h, functionality: fully functional, machine/vehicle number: 474, -Weiler -E50/1 -No.: 474 -Year of manufacture: 1996 -Operating hours: approx. 22,400 -Voest-Alpine Steinel control system (the control system likely operated via a separate desktop PC) -Includes chip conveyor, various tool holders, and tools Shipping possible upon request. Sale only to commercial businesses. Godpfx Abey U Iqgjhjui Stated purchase price = net price plus 19% VAT = €9,282.00 gross.

Condition: good (used), Internal article number: 26104 Lathe Weiler Condor 81 + 3-axis digital display (Heidenhain ND780) Gsdpfs Ai Dgpex Abhsui + Compliant with occupational safety regulations (emergency stop and chuck guard, with switch) + Collet set + Electrically inspected until 07/2028 (according to inspection label) The machine comes from a vocational school and is in very good technical and optical condition. Technical data: Distance between centers: 750 mm Swing over bed: 165 mm Spindle speed: max. 2800 rpm Spindle bore: 40 mm Short taper spindle head DIN 55027 size 5 with bayonet lock Tailstock MK 3 Feeds from 0.015 to 0.46 mm/rev Weight approx. 1100 kg Dimensions (L x W x H): 190 x 100 x 130 cm The machine is fully functional and can be inspected under power by appointment in our heated storage area of over 500 m².

Condition: good (used), Year of construction: 2006, functionality: fully functional, spindle bore: 41 mm, turning diameter: 330 mm, turning length: 750 mm, quill stroke: 130 mm, quill diameter: 50 mm, total length: 1,800 mm, total width: 1,150 mm, total height: 1,650 mm, spindle speed (max.): 4,500 rpm, type of input current: three-phase, overall weight: 1,300 kg, Equipment: documentation/manual, rotational speed infinitely variable, type plate available, WEILER C30 x 750 – Precision lathe with Siemens 840D control Machine designation: Weiler C30X750 Manufacturer: WEILER Werkzeugmaschinen GmbH Year of manufacture: 2006 Condition: Used, well-maintained – fully functional. Location: Graz, Austria Images/Videos: Additional images and videos of the machine in operation will be provided upon request. Technical data: - Distance between centers: 750 mm - Swing diameter over bed: 330 mm - Swing diameter over cross slide: 160 mm - Spindle bore: approx. 40.5 mm - Max. spindle speed: up to 4,500 rpm - Drive power (60 %/100 % ED): approx. 9 / 7 kW Guedpfjvphv Tsx Abhei - Bed width: approx. 240 mm - Tailstock diameter: 50 mm - Tailstock travel: 130 mm - Feed range: 0.001 – 10 mm/rev (longitudinal & transverse) - Weight: approx. 1,300 kg - Space requirement (L × W × H): approx. 1,800 × 1,150 × 1,650 mm Equipment: - Cycle-controlled / NC control - Powerful main spindle - RÖHM chuck - Central lubrication - Collets / quick-change tool holder - Documentation and parts lists Inspection: The machine is ready for inspection and a test run in its operational state. Transport / packaging can be arranged upon request.

Condition: excellent (used), Year of construction: 2017, - Accessories included - Digital display WEILER VCPlus WORK AREA Gjdpfx Abezu I Amjhoui Maximum turning diameter over bed 360 mm Maximum turning diameter over cross slide 190 mm Distance between centers 800 mm Spindle center height 180 mm TURRET Spindle head DIN 55027/DIN ISO 702-3, size 6 Spindle bore 57 mm Spindle diameter in the front bearing 90 mm MAIN DRIVE Drive power 60 %/100 % duty cycle – / 10.5 kW Speed range 25 – 4,000 min-1 Number of speeds, infinitely variable FEED RANGE Number, infinitely variable Longitudinal 0.01 – 6 mm/rev Cross 0.003 – 2 mm/rev THREADING RANGE Metric threads 0.1 – 20 mm TAILSTOCK Quill diameter 50 mm Quill travel 110 mm Internal taper DIN 228 MK 3 WEIGHT Machine 1400 kg DIMENSIONS Length / Width / Height 2000 x 970 x 1730 mm

Condition: good (used), Year of construction: 1994, functionality: fully functional, turning diameter: 410 mm, spindle bore: 54 mm, rotational speed (max.): 3,000 rpm, total height: 1,800 mm, total length: 2,200 mm, total width: 1,500 mm, workpiece weight (max.): 700 kg, overall weight: 2,100 kg, For sale is a lathe manufactured by Weiler, model E35. The machine is in very good condition and fully functional. Technical specifications: Year of manufacture: 1994 Control system: Siemens Sinumerik 805 Center height: 200 mm Center distance: 950 mm Max. turning diameter over bed: 410 mm Max. turning diameter over cross slide: 200 mm Max. speed: 3,000 rpm Tool changer: Multifix Spindle bore: 54 mm Max. workpiece weight: 700 kg Gjdpfxoxu Ehge Abhjui Dimensions: approx. 2,200 x 1,500 x 1,800 mm Weight: approx. 2,100 kg Upon request, transport and loading can be arranged throughout Europe for an additional fee. Prices exclude VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange possible! Machine buying and selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE Do you need a high-quality but affordable metalworking machine for your production? Or would you like to sell yours? For more information or contact options, visit us on our website.

Condition: ready for operation (used), Year of construction: 2012, overall weight: 6,000 kg, CNC capacity 2000x800mm Godps Ahq Dxjfx Abheui spindle bore 106mm total power 45kW weight 6000kg

Year of construction: 1994, condition: used, A CNC lathe with counter spindle including accessories is offered for sale. Spindle bore: Ø 32mm. Machine hours: approx. 47000. Control system: Siemens Sinumerik 820T. Equipped with a 16-station Sauter tool turret VDI20, Röhm KFD-HS 140/3 main spindle three-jaw chuck, Marquart Quadro NC collet chucking system, counter spindle collet holder 173E and Tebaron TEB/AH1 mist extraction unit. Accessories: approx. 85 VDI20 tool holders with blanking plugs, 173E collets from Ø 3-42mm, three new sets of soft jaws and additional jaws, optical tool measuring device and VDI20 turret alignment bar. The cutting tools shown are not included. Control modules defective. Inspection possible by arrangement. Godpfx As Aih Edebheui

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Weiler Praktikant VCD Precision Lathe (2021) Manufacturer: Weiler Model: Praktikant VCD Precision Lathe Year of manufacture: 2021 Condition: Used, excellent, like new, incl. new maintenance and measurement protocol prior to sale Centre distance: 650 mm Centre height: 160 mm Swing over bed: 320 mm Swing over cross slide: 190 mm Cross slide travel: 150 mm Top slide travel: 110 mm Top slide swivel range: +/-65° Bed saddle guideway length: 350 mm Bed width: 205 mm Tool shank cross-section (H x W): 20 x 20 mm Height from top slide to turning centre: 30 mm Spindle head according to ISO DIN 702-3 (DIN55027) size 5 Spindle diameter in front bearing: 70 mm Spindle bore: 43 mm Main spindle taper metric 50 Drive power: 6 kW Speed range: 30 – 4,000 rpm Number of gear stages: 1 Number of speeds: stepless Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Facing feed: 0.006 – 0.2 mm/rev Quill diameter: 40 mm Quill stroke: 85 mm Gsdpfjztyrqjx Abhoui Quill taper: 3 Morse taper Weight, without packaging and accessories: approx. 1,150 kg Dimensions (L x W x H), net: 1,720 x 890 x 1,700 mm Headstock / Rear cover / Sliding guard: Light grey RAL 7035 Machine base / Machine bed: Basalt grey RAL 7012 Display housing: Blue NCSS 4550-R80B

Condition: excellent (used), Year of construction: 2011, operating hours: 29,000 h, functionality: fully functional, Weiler E40 Precision Lathe Manufacturer: Weiler Type: E40 Year of Manufacture: 2011 Condition: Used, operational, ready for demonstration Operating Hours: 29,000 h Scope of Supply: - Documentation - Machine feet - Coolant system - Machine lamp - Full chuck jaws - Half chuck jaws Gsdpfxeztypvo Abhjui - 3-jaw chuck - 4-jaw chuck - 4-position automatic tool changer incl. 4 tool holders - MultiFix tool changer

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 180 mm, travel distance Z-axis: 750 mm, controller manufacturer: SIEMENS, number of axes: 2, Horizontal turning machine manufactured in 2013. This Weiler C30X 750 features a Siemens control system, ensuring reliable operation and precision. If you are looking to get high-quality turning capabilities, consider the Weiler C30X 750 machine we have for sale. Contact us for further details. - Control: Siemens Guodpez Hlcfefx Abhji Technical Specification Counter Spindle No Driven Tools No

Condition: used, Year of construction: 2011, functionality: fully functional, WEILER C30 cycle lathe (2011) Manufacturer: WEILER Type: C30 cycle lathe Year of manufacture: 2011 Gsdpjzy Sq Eefx Abhjui Condition: Used

Condition: excellent (used), functionality: fully functional, Weiler high-precision lathe, model Condor 81, center lathe with 3-axis digital display from K&C, NEW. Technical specifications: >> Year of manufacture: 1982, Machine no. 82 016 >> Center height: 165 mm >> Center distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle head, DIN 55027, size 5, with bayonet lock >> Tailstock: MK 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake: can be engaged Gjdpez Ehzzofx Abhsui >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories and equipment: >> 3-axis digital display from K&C, new, 12 months manufacturer's warranty, with operating manual Functions: Switching mm/inch, coordinate selection ABS/INC, halving of the display value, reference mark, tool programming 200 items, taper calculation, radius/diameter, quick zeros, switching of the counting direction >> 1 three-jaw chuck, 160mm, 1 set of jaws >> Mulifix size B with 1 steel holder >> Change gears >> Electronic spindle protection >> Back panel >> Coolant system >> Machine feet At an additional cost: Collet chuck system, new, and collets, new, from 3 to 26 mm in 1 mm increments. About the machine: Offered is a used Weiler Condor 81 in very good condition. It comes from a training center and has been well maintained. The machine is fully functional, of course. It is a very robust and powerful machine. The new 3-axis digital display from K&C makes the work even easier and more precise. The machine has been electrically and mechanically inspected by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to inspect and test this machine on-site while it is powered up.

Condition: excellent (used), functionality: fully functional, Weiler center lathe, model Condor 81, with a leading and following center, and a 3-axis digital display from K&C, NEW. Technical specifications: >> Year of manufacture 1982, machine number 82 017 >> Center height 165 mm >> Center distance 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027, size 5, with bayonet lock >> Tailstock MK 3 >> Feeds from 0.015 to 0.46 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approximately 1100 kg >> Spindle brake can be engaged >> Length 1.83 m, height 1.29 m, depth 0.88 m Accessories and equipment: >> 3-axis digital display from K&C, new, 12 months manufacturer's warranty, with operating manual Functions: Switching between mm/inch, coordinate selection ABS/INC, halving the display value, reference mark, tool programming 200 pieces, taper calculation, radius/diameter, quick zeros, switching the counting direction >> 1 three-jaw chuck, 160 mm, 1 set of jaws >> Mulifix size B with 1 steel holder >> Change gears >> Electronic spindle protection >> Back wall >> Coolant system >> Machine feet At an extra cost: New collet chuck and new collets from 3 to 26 mm, in 1 mm increments. Gjdpfxez D Hx Ns Abhoui About the machine: A used Weiler Condor 81 in very good condition is offered. It comes from a training center and has been well maintained. The machine is, of course, fully functional. A very robust and powerful machine. The new 3-axis digital display from K&C makes working even easier and more precise. The machine has been electrically and mechanically inspected by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to inspect and test this machine on site while it is powered up.