Used Weiler Ud for sale (174)

Condition: used, Year of construction: 1993, Internal item no.: 26036 Lathe Weiler Praktikant 160B Year of manufacture: 1993 Fpjdpfx Aey D N Daskvog Centre height: 160 mm Centre distance: 650 mm Spindle speeds: 48–2,500 rpm Spindle bore: 40 mm The machine is equipped as follows: - 3-axis digital readout (Z0 display not working, likely scale is defective) - Multifix "A" toolpost - Drill chuck MK3 - 160 mm 3-jaw chuck Garant (including reversible jaws) - Steady rest - Various change gears - Operating manual / repair documents, etc. Condition: All gear stages shift smoothly. The main spindle runs very quietly, even at high speeds. The bedways have slight scoring. Dimensions (LxWxH): 180 x 90 x 170 cm Weight: approx. The machine is fully functional and can be inspected under power by arrangement at our premises, with over 500 m² of heated storage space.

Condition: used, WEILER Commodor incl. 3-axis digital readout Heidenhain - 3-axis digital readout / Heidenhain - Center height: 180 mm - Swing diameter over bed: 330 mm - Distance between centers: 1000 mm - Spindle bore: 56 mm - Spindle speeds: 25–2000 rpm - Automatic longitudinal / cross feeds - Thread cutting / metric / imperial / module etc. - Multifix toolpost with inserts - Chuck guard - 2x emergency stop - Three-jaw chuck - Chip guarding rear wall - Very well-maintained condition - Machine feet - Documentation Dimensions: LxWxH 2.3x1.2x1.6 m / Weight 1600 kg Fsdpfx Akjy Dcppsvepg Errors and omissions excepted.

Condition: ready for operation (used), Year of construction: 1998, operating hours: 35,626 h, spindle speed (max.): 3,000 rpm, number of axes: 2, Horizontal turning machine manufactured in 1998. This Weiler E35 features a center distance of 950 mm and a swing over bed of 410 mm. It has a spindle bore of 54 mm and a maximum torque at spindle of 700 Nm. If you are looking to get high-quality turning capabilities, consider the Weiler E35 machine we have for sale. Contact us for further details. Center distance: 950 mmCenter height: 200 mmSwing over bed: 410 mmSwing over cross slide: 200 mmCross slide travel: 230 mmCarriage guide length: 480 mmSpindle nose: DIN 55025 size 6Spindle bore: 54 mmSpindle taper: Morse taper 6Drive power (100% / 60% duty): 7.5 / 9 kWMaximum torque at spindle: 700 NmSpeed range: 1–3000 rpmSpeed range gear stage I: 1–750 rpmSpeed range gear stage II: 4–3000 rpmTailstock quill diameter: 65 mmTailstock quill travel: 120 mmTailstock taper: Morse taper 4Tool system: Parat size 2Control: D2Number of axes: 2 (X, Z) Technical Specification Counter Spindle No Fpjdpfxoy Axu So Akveg Driven Tools No

Condition: excellent (used), Year of construction: 2011, Weiler Primus VC precision lathe Year of manufacture: 2011 Technical details Turning diameter: 250 mm Turning length: 500 mm Center height: 140 mm Swing diameter over bed slide: 280 mm Max. swing diameter over cross slide: 150 mm Main spindle: Speed range – main spindle: 30 – 4,000 rpm Power 4.0 kW Number of gear stages: 1 Spindle head: 5 / DIN 55027 Spindle diameter in front bearing: 70 mm Spindle bore: 40 mm Usable bar diameter: 40 mm Tool holder: System: MultiFix B Turning tool shank cross-section: 20 x 20 Tailstock: Quill travel: 85 mm Quill diameter: 40 mm Tailstock taper: MK 3 Feeds: Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Cross feed: 0.006 – 0.2 mm/rev Thread cutting: Fpjdjw Ebdbopfx Akvsg Metric: 0.25 – 8 mm Inches: 80-2 1/” Travel distances: X-travel Cross slide travel: 150 mm Z-travel by cross slide: 500 mm Z-travel by top slide: 110 mm Total power requirement: 15 kVA Machine weight: approx. 800 kgs Space requirements: 1400x935x1550 mm Accessories/options: - Documentations - 3-jaw chuck diameter 160mm, with jaws - 4-jaw chuck diameter 160mm, with jaws - Collet type chuck with collets - Tailstock - Multifix tool holder, with holders - Steady - Change gears - Different kind of tooling - Lista cabinet - Spare parts - etc... Under power in our warehouse.

Condition: ready for operation (used), L&Z Lathe WEILER LZ 330 incl. new 3-axis digital readout (from educational facility) - "NEW" 3-axis digital readout - Center height 165 mm - Swing over bed 330 mm - Turning length 800 mm - Spindle speed range (gearbox) 25–2800 rpm - Automatic longitudinal/cross feeds - New Multifix toolpost with holders Fpjdpey Id Uhefx Akveg - Three-jaw chuck - Collet system with 20 collets - Original copy attachment - Various accessories - Documentation Dimensions (LxWxH): 1.8x0.7x1.6 meters / Weight: 800 kg Errors and omissions excepted.

Condition: ready for operation (used), Year of construction: 2005, L & Z Lathe / WEILER DA 210x1000 / With new 3-axis digital readout - Year of manufacture: 2005 - CE marking - Guideways in good condition - FULL TECHNICAL DATA SEE PHOTOS - Three-axis digital readout "NEW" - Quick-change collet system incl. 79 collets (173E) - Multifix base holder with inserts - 3-jaw chuck - Electrical chuck guard - Additional sliding guard - Coolant system - Drill chuck / live center - Chip guard rear wall - Work light - Complete documentation Dimensions: LxWxH 2.8x1.2x1.8 meters / Weight 1600 kg Fjdpey H Ikqofx Akvspg Errors / input mistakes excepted.

Condition: excellent (used), Year of construction: 1998, turning diameter 410/ 440 mm turning length 950 mm control Siemens / Weiler D2 workpiece weight max 900 kg spindle head Gr 6 MK 6 spindle bore 54 mm face stroke 230 dia. of quill MK 4 mm quill stroke 120 mm centre height 200 mm thread pitch max. in mm 0,1 - 250 mm spindle turning speed - stepless 1 - 3000 U/min Fpedpfoyrh Apex Akvjg total power requirement 12 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 2,3 x 1,5 x 1,8 m

Condition: used, Year of construction: 1999, turning length: 1,000 mm, turning diameter: 500 mm, spindle bore: 80 mm, spindle speed (max.): 2,500 rpm, capacity 1000x570 mm, spindle bore 80 mm, Multifix turret, Siemens control Fpsdjy E Hvvopfx Akvsg

Condition: used, Year of construction: 1997, - Year: 1997 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 270 - Drive system: Teach-in - Centre height [mm]: 210 - Swing over bed [mm]: 420 Fedpfxswnh I So Akvspg - Distance between centres [mm]: 900 - Spindle bore [mm]: 55 - Min. spindle speed [rpm]: 4 - Max. spindle speed [rpm]: 3000 - Options: Digital readout - Type of digital readout: Weiler - Control: CNC Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, 110 Kw / 150 hp model. Machine has been refurbished previously. Perfect for grinding full frozen blocks etc. Fsdsywpcispfx Akvopg

Condition: good (used), Year of construction: 2008, Weiler DZ 40, Year of manufacture: 2008, Siemens 840 D control, Fjdpfxoy Ev Iuo Akvopg Travel X/Z: 200/350 mm, Turning diameter: 180 mm, Max. swing diameter: 560 mm, Y-axis: +/-25 mm, Q-axis / programmable tailstock, Q-axis travel: 360 mm, Q-axis measuring system: rotary, Tailstock: MK 4, Main spindle max. bar capacity: 42 mm, Spindle bore: 52 mm, Rapid traverse X/Z/Q: 30/30/20 m/min, Turret: 16 stations – all driven, VDI 25, Shank diameter: 25 mm, Driven tools up to 4,500 rpm, Parts catcher, Accessories, Driven tool holders, Fixed holders,

Condition: used, For sale is a used Weiler Matador lathe. Version VS2 with pre-select gearbox. Comes with change gears and collet set. Good, fully functional condition. Centre height: 140 mm Swing over bed: 295 mm Distance between centres: 500 mm Spindle bore: 36 mm Spindle speeds: 15 - 3350 rpm Inspection under power possible in 5023 Salzburg. Forklift available for loading. Fpodpfxsy Hi A Ie Akvog

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C—NEW in Special Light Grey Paintwork!!! Technical Data: >> Machine No. 92-027, Year of manufacture: 1992 >> Centre height: 140 mm >> Distance between centres: 500 mm Fsdpfx Akeyylq Uovjpg >> Spindle speeds: 15 – 3550 rpm >> Spindle bore: 36 mm >> Short Taper Spindle Nose DIN 55022-5 with bayonet lock >> Tailstock taper: MT 3 >> Feed rates: 0.012 to 0.9 mm/rev >> Thread cutting: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches: 0.25 to 12 mm >> Weight: approx. 700 kg >> Length: 1.4 m, Height: 1.2 m, Depth: 0.55 m Accessories and Equipment: >> 3-axis digital readout by K&C, brand new, 12-month manufacturer’s warranty with operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching >> 1 piece 3-jaw chuck with 1 set of jaws >> 1 piece 4-jaw chuck with 1 set of jaws >> Electronic spindle protection >> Multifix size A with 2 tool holders >> Motor brake >> Bed stop About the machine: Offered here is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional and has been freshly repainted in light grey. A very attractive machine. The 3-axis digital readout by K&C has been retrofitted. All measuring scales are new and fitted with protective covers to prevent contamination. The carriage movement is smooth and even throughout. Take the opportunity to view this machine under power on site and convince yourself of its condition.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C - NEW - Special Light Grey Paint Finish!!! Technical Data: >> Machine no. 92-029 - Year of manufacture: 1992 >> Center height: 140 mm >> Center distance: 500 mm >> Spindle speed: 15 – 3550 rpm >> Spindle bore: 36 mm >> Short taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock taper: MK 3 >> Feeds from 0.012 to 0.9 mm/rev >> Thread types: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 12 mm >> Weight approx. 700 kg >> Length: 1.4 m, Height: 1.2 m, Depth: 0.55 m Accessories and Equipment: >> 3-axis digital readout by K&C, new, 12-month manufacturer's warranty, with operating manual Functions: Switching between mm/inch, ABS/INC coordinate selection, value halving, reference point, tool programming for up to 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching Fpedpjyylqhefx Akveg >> 1 three-jaw chuck, 1 set of jaws >> 1 four-jaw chuck, 2 sets of jaws >> Electronic spindle protection >> Multifix size A with 2 tool holders >> Motor brake >> Bed stop About the machine: Offered here is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional and has been newly painted in light grey. A very attractive machine. The 3-axis digital readout by K&C has been retrofitted. All scales are new and equipped with protective covers to shield them from dirt. The carriage runs smoothly and evenly. Take the opportunity to view this machine under power on site and see its condition for yourself.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C NEW in Special Light Grey Finish!!! Technical Data: >> Machine No. 92-028 Year of manufacture: 1992 Fsdpfx Ajyyb T Sekvspg >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speed: 15 – 3550 rpm >> Spindle bore: 36 mm >> Short taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock MK 3 >> Feeds: 0.012 to 0.9 mm/rev >> Possible threads: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 12 mm >> Weight approx. 700 kg >> Length 1.4 m, Height 1.2 m, Depth 0.55 m Accessories and Equipment: >> 3-axis digital readout by K&C, new, 12-month manufacturer warranty with operating manual Functions: Switchable mm/inch, coordinate selection ABS/INC, display value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, change of counting direction, >> 1 piece 3-jaw chuck, 1 set of jaws >> 1 piece 4-jaw chuck, 1 set of jaws >> Electronic spindle guard >> Multifix size A with 2 tool holders >> Motor brake >> Bed stop About the machine: Offered here is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional and has been repainted in light grey. A very nice machine. The 3-axis digital readout from K&C has been retrofitted. All measuring scales are new and equipped with cover plates to protect them from dirt. The slides move freely and smoothly. Take the opportunity to inspect this machine under power on site and see its condition for yourself.

Condition: good (used), Year of construction: 1968, functionality: fully functional, machine/vehicle number: 1122, For sale is a robust and fully functional Weiler lead screw and feed shaft lathe from 1968. The machine comes from our workshop inventory and was in use until recently. Technically, it is in working condition; cosmetically, it shows signs of use consistent with its age. This is a classic, solidly built toolmaker's lathe of proven German industrial quality. Ideal for workshops, training, maintenance, or small manufacturing businesses. —— Fpodpeynwiwjfx Akvog Condition • Used • Fully functional • Not refurbished • Age-related signs of wear —— Special Features • Heavy-duty construction • Renowned Weiler quality • Simple, low-maintenance technology • Ready for immediate use —— Location & Handover Location: Eisenach Collection preferred. Loading by arrangement possible. Sale is made under exclusion of any warranty and liability for material defects. The machine is sold as seen.

Condition: ready for operation (used), WEILER Condor VS 2 with new 3-axis digital readout from university (test laboratory) - New 3-axis digital readout - Guideways in "as new" condition - Centre height: 165 mm - Swing over bed: 330 mm - Distance between centres: 800 mm - Speed range: 28-2800 rpm - Automatic longitudinal / cross feeds Fpjdpfx Akey Efqreveg - Spindle bore: 40 mm - Thread cutting / metric / imperial etc. - Collets / quick-clamping device incl. collets - 4-jaw chuck - Röhm - Face plate - Multifix toolpost with holders - Emergency stop - Chuck guard - Documentation Dimensions: LxWxH 2x0.8x1.6 meters / Weight: 900 kg Subject to errors and input mistakes.

Condition: used, Year of construction: 1979, functionality: fully functional, Leadscrew and feed rod lathe Make: WEILER Model: COMMODOR Year: 1979 Technical Data Fpedpext Ngqsfx Akvsg Manufacturer: Weiler Model: Commodor Centre distance: 1000 mm Swing over bed: 400 mm Spindle bore: 50 mm Speed range: 63-2000 rpm Drive power: 4 kW Dimensions: approx. L 2.2 x W 1.0 x H 1.7 m Weight: approx. 1.5 t Equipment • 3-axis digital readout • Drill chuck • Röhm 3-jaw chuck, D 200mm • Multifix toolpost • The additional 3-jaw chuck shown on the machine is not included in the scope of delivery! All information without guarantee. A demonstration under power is possible at any time in our showroom.

Condition: like new (used), Year of construction: 2009, operating hours: 31,914 h, functionality: unexamined, machine/vehicle number: EK02, turning diameter over cross slide: 560 mm, turning length: 600 mm, turning diameter: 560 mm, spindle bore: 77 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 205 mm, travel distance Y-axis: 530 mm, spindle motor power: 27 W, total height: 2,050 mm, total length: 3,900 mm, total width: 2,200 mm, type of input current: three-phase, overall weight: 6,300 kg, chuck outer diameter: 200 mm, Equipment: documentation/manual, rotational speed infinitely variable, The machine is in excellently restored condition. Fedeykzw Dspfx Akvopg

Condition: good (used), Year of construction: 1972, turning diameter over bed 330 mm turning diameter over slide rest 200 mm turning length 800 mm total power requirement 3 kW weight of the machine ca. 800 kg dimensions of the machine ca. 1,9x0,7x1,2 m turning speed range 24-2800 U/min Accessories Fjdpfjwwl Izjx Akvopg *2 rotary chucks with replacement jaws *5 Multifix holders *Set of interchangeable wheels *Various tips and accessories

Condition: as good as new (ex-display), WEILER COMMODOR 180 GSD / New Machine – Exhibition Model - Available from stock - Exhibition machine / NEW – UNUSED - 3-axis digital readout - CE marking - Center height 180 mm - Swing over bed 380 mm - Swing over cross slide 215 mm - Distance between centers 1000 mm - Bar capacity 56 mm - Speeds / gearbox: 25 – 2000 rpm - Automatic longitudinal / cross feeds - Thread cutting inch / metric etc. - Chuck guard - Tailstock / quill taper MK 4 - Quill stroke 150 mm - Coolant system - Multifix quick-change toolpost with insert - 3-jaw chuck 200 mm Fjdjy Dc Tzepfx Akvjpg - Work lamp - Chip guard (rear) - Documentation Dimensions: LxWxH 2.6x1.6x1.7 meters / Weight 2000 kg Errors and omissions excepted

Condition: good (used), Year of construction: 2001, Weiler DA 210 Lathe Weiler DA 210 with Fagor digital readout, year of manufacture 2001, in very good original condition. The machine comes from the special production department of a renowned German mechanical engineering company. CE-compliant!! Technical Data: WORKING AREA Centre height: 210 mm Swing diameter over bed: 435 mm Swing diameter over cross slide: 245 mm Centre distance: 1,000 mm SPINDLE Spindle nose: DIN 55027 / DIN ISO 702-3 Size 6 Spindle bore: 52 mm Spindle bearing diameter (front): 83 mm MAIN DRIVE Drive power 60% / 100% duty cycle: – / 5.5 kW Speed range: 44 – 2,000 rpm Number of speeds: 12 FEED RANGE Number of feeds: 66 Longitudinal: 0.072 – 4 mm/rev Cross: 0.036 – 2 mm/rev THREAD CUTTING RANGE Metric threads: 0.5 – 28 mm TAILSTOCK Quill diameter: 65 mm Quill stroke: 120 mm Fsdpfoy Auyqox Akvspg Internal taper: DIN 228 MK 4 ACCEPTANCE ACCURACY DIN 8605 About the machine: HIGHEST PRECISION, USER-FRIENDLY OPERATION AND SOPHISTICATED TECHNOLOGY are advantages of the conventional Weiler DA series. Offered is a Weiler DA 210 lathe with Fagor digital readout, year 2001. This lathe is in very good original condition. It comes from a workshop where it was only occasionally used for special production. Very easy to operate controls. The guides are regularly lubricated via the central lubrication system. The Weiler DA 210 has been mechanically and electrically inspected by us. Take the opportunity to view and test the Weiler DA 210 under power at our facility. You can find further lathes from well-known manufacturers on our website.

Condition: ready for operation (used), Year of construction: 1997, Lead and feed screw lathe / WEILER CONDOR B incl. 3-axis digital readout / Heidenhain - Machine from educational facility - Center height: 165 mm - Swing over bed: 330 mm - Swing over cross slide: 185 mm - Turning length: approx. 800 mm - Spindle speeds: 22 - 2800 rpm - Automatic longitudinal / cross feeds - Thread cutting / metric, etc. - Bar capacity: 40 mm - Tailstock / quill taper: MT 3 - Electrical chuck guard - Multifix tool post with holders - 3-jaw chuck - Forkardt - Machine lamp - Chip guard at rear - Bed stop - Machine feet - Documentation Fpodpfxjy A Ey Uo Akvsg Dimensions (LxWxH): 1.8 x 0.8 x 1.6 meters / Weight: 1100 kg Subject to errors and input mistakes.

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, Weiler Condor B universal lathe in excellent condition, ex-educational use, equipped with a new 3-axis digital readout and accessories. Original paintwork. Machine No. 96-2374 with CE certification. Technical specifications: - Year of manufacture: 1996 - Machine number: 96-2374 - Centre height: 165 mm - Distance between centers: 750 mm - Spindle speeds: from 22 to 2800 rpm - Spindle bore: 40 mm - Spindle nose: DIN 55027-5 with bayonet lock - Tailstock: Morse Taper 3 - Feed rates: from 0.016 to 0.5 mm/rev - Thread cutting: metric, imperial, module, and diametral pitch - Metric thread pitch: from 0.18 to 28 mm - Weight: approx. 1100 kg - Switchable spindle brake - Required space: LxWxH 183 x 88 x 129 cm Accessories and equipment: - Rhom steel 3-jaw chuck - New collet set 5C 1-28 mm in 0.5 mm steps with new drawbar - New drill chuck 1-13 mm - Multifix toolpost with 4 steel holders - Bed stop - New live centre - Change gears Fsdpfx Asyuyrujkvopg - Faceplate - Coolant system - Chip guard - Spindle cover with emergency stop - German instruction manual

Condition: excellent (used), Year of construction: 2013, Weiler Praktikant VC Plus Weiler Praktikant VC Plus Lathe with Weiler VC Plus digital display, year of manufacture 2012, in excellent original condition. The machine originates from the special construction department of a renowned German mechanical engineering company. CE compliant! Technical data: WORKING RANGE Center height: 160 mm Fsdjy Al Tuspfx Akvopg Swing diameter over bed: 320 mm Swing diameter over cross slide: 190 mm Distance between centers: 650 mm MAIN SPINDLE Spindle nose: DIN 55027/DIN ISO 702-3 size 5 Spindle bore: 43 mm Spindle diameter in front bearing: 70 mm MAIN DRIVE Drive power 60 % / 100 % duty cycle – / 8 kW Speed range: 25 – 5,000 rpm Number of speeds: stepless FEED RANGE Number: stepless Longitudinal: 0.01 – 6 mm/rev Cross: 0.003 – 2 mm/rev THREAD CUTTING RANGE Metric threads: 0.1 – 20 mm TAILSTOCK Quill diameter: 40 mm Quill stroke: 85 mm Internal taper: DIN 228 MK 3 ACCEPTANCE ACCURACY: DIN 8605 About the machine: The WEILER VC Plus series combines the highest technical quality – with superior long-term precision – with highly efficient, transparent operating concepts for enhanced training and production. This new generation of WEILER lathes, thanks to its unique operating concept, is the perfect solution for single and small batch production. In combination with a wide range of tool systems, the VCPlus series is ideal for training and industrial operations. The VCPlus operating concept: All key functions for conventional turning are in clear view. Simple contours such as tapers and radii can be produced quickly and easily. Straightforward turning: The spindle speed and feed can be adjusted steplessly. An economical and intelligent solution for all daily applications – without compromising safety. Provides optimal machining conditions. For sale is a Weiler Praktikant VC Plus lathe with Weiler VC Plus digital display, year 2012. This lathe is in excellent original condition. It comes from a facility where it was only lightly used for special construction purposes. It features very user-friendly controls. The guides are regularly lubricated by the central lubrication system. The Weiler Praktikant VC Plus has been mechanically and electrically inspected by us. Take the opportunity to view and test the Weiler Praktikant VC Plus under power at our premises. Further lathes from well-known manufacturers can be found on our website.