Used Wire Draw for sale (7,262)

Condition: used, Year of construction: 2019, Wire EDM Machine Manufacturer: Mitsubishi Electric Model: MV1200S NewGen Year of manufacture: 2019 Operating hours: approx. 9,500 Control: M800 D-CUBES Mitsubishi Electric control system Hybrid construction Gsdpfoxpfy Ssx Ag Tsil Travel paths X/Y/Z: 400 x 300 x 220 mm Travel paths U/V: 120 x 120 mm Max. workpiece dimensions: 810 x 700 x 215 mm Max. workpiece weight: 500 kg ODS – Optical Drive System Tubular direct drives in the X/Y axes Linear scales in X/Y axes Intelligent AT – Automatic wire threading For wire diameters 0.10 – 0.3 mm Automatic small-hole detection function 5 controlled axes – Prepared for additional axes PFC – Precise Finish Circuit LLS – Long Life System 10 kg wire station Wire alignment block Wire chopper Compressor cooler tä161225

Condition: ready for operation (used), Year of construction: 1988, Control: FANUC Travel: X= 500, Y= 350, Z= 300 mm Max. table load: 350 kg Dimensions: 3500 x 2400 x 2400 mm Gjdpoxx Uatsfx Ag Tsil Weight: 3,000 kg

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, workpiece weight (max.): 450 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, workpiece height (max.): 250 mm, workpiece width (max.): 750 mm, workpiece length (max.): 550 mm, GF AgieCharmilles Progress VP2 Year of manufacture: 2011 Travel paths: X = 350 mm, Y = 250 mm, Z = 256 mm U/V-axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 kg (submerged) / 450 kg (dry) Giedpfx Agoxyw Ebs Tel Achievable surface finish: Ra: 0.20 µm Maximum cutting speed: 500 mm²/min Glass scales on X and Y axes for increased precision Available wire diameters: 0.15 – 0.33 mm Submerged wire-cut EDM machine with automatic wire threading and automatic re-threading after wire breakage Manual front door (accessible from one side) Including AGIEJOGGER hand-held box for convenient setup AGIE IPG-V generator with power module AGIEVISION 5 control system Dimensions (L x W x H): 1640 x 2040 x 2220 mm Net weight: 2580 kg Our machines are cleaned and fully overhauled after order intake. A test cut with optimal surface finish is performed prior to acceptance. You will receive a 6-month warranty on the machine. We are happy to offer on-site commissioning and training.

Condition: ready for operation (used), functionality: fully functional, Automatic cable cutting / crimping / dismantling machine Gijdpox H Um Ssfx Ag Tjl High daily productivity thanks to quick changeovers. On average, a crimping machine can produce between 700 and 1300 crimps per hour. This machine can crimp terminals ranging from 2800 to 3200 units. Additionally, the machine can test the connections it crimps! - Flexibility and diverse applications - Maximum uptime with minimum maintenance - Integrated quality measurement devices - Intuitive and user-friendly machine operation

Year of construction: 1987, condition: ready for operation (used), A Mitsubishi wire EDM machine including an automatic wire changer (AWF system) is available. Travel X/Y: 381mm/749mm, table dimensions X/Y: 647mm/797mm, max. workpiece dimensions X/Y/Z: 647mm/749mm/259mm, max. workpiece weight: 950kg. Machine dimensions X/Y/Z: approx. 1850mm/2600mm/1950mm, weight: approx. 4100kg. Including 12 wire spools and one ceramic replacement plate. The wire changer is defective. Documentation available. An on-site inspection is possible. Gsdpfx Agex Hz Sho Tjil

Condition: new, Year of construction: 2025, pressing force: 400 t, table width: 1,200 mm, table length: 1,500 mm, retraction force: 150 t, stroke length: 1,000 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHSP 400/150 H-Type Hydraulic Deep Drawing (Forming) Press – 8 Guideways General Description The CRONOSSTECH CHSP series H-Type hydraulic deep drawing presses are developed with a double-acting working principle to ensure controlled material flow in sheet metal forming, deep drawing, and forming applications. The H-frame structure with 8 guideways provides maximum rigidity during the pressing cycle, and maintains parallelism and perpendicularity tolerances consistently over long strokes. The CHSP 400/150 model, with a 400-ton main ram and 150-ton blank holder ram (pot), is designed for deep drawing and forming applications that require high tonnage. The frame is stress-relieved by vibration to ensure long-term durability and reliable operation. ⚙️ Standard Equipment - Steel construction, H-frame body with 8 guideways - Stress-relieved frame via vibration - Bronze Zr14 guide slippers - WPQR and WPS approved welding by TÜRK-AK accredited certification (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing conform to CE standards - PLC-controlled hydraulic system - 7” DELTA touchscreen panel - Adjustable ram and blank holder (pot) stroke control - Adjustable ram and pot tonnage (pressure) control - Automatic lubrication system - Electronic filtration contamination warning - Monitoring of hydraulic unit oil temperature and system status on display - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHSP 400/150 Type: Steel construction, H-frame body with 8 guideways Frame Material: St52 – ERDEMIR Guideway Liners: Bronze Zr14 Capacity (Ram): 400 Tons Capacity (Pot): 150 Tons Moving Table Dimensions: 1200 × 1500 mm Fixed Table Dimensions: 1200 × 1500 mm Parallelism Tolerance: 120 microns/m Perpendicularity Tolerance: 60 microns/m Stroke (Ram): 1000 mm Stroke (Pot): 350 mm Min. Open Height: 100 mm Max. Open Height: 1100 mm Stress Relieving: Vibration method Welding Application: WPQR & WPS approved by TÜRK-AK accreditation EN ISO 15614-1:2017 (Welding applications are supervised by certified "welding coordination engineers" per EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 37 kW – IE3 Main Pump: 45 cm³ – REXROTH or PARKER Rapid Descent Speed (Movable Table): 150 mm/s Forming Speed (Movable Table): 12 mm/s Return Speed (Movable Table): 170 mm/s Forward Speed (Pot Table): 30 mm/s Main Cylinder Internal Diameter: Ø450 mm – Ck45 Pot Cylinder Internal Diameter: Ø280 mm – Ck45 Giodjx N Uhhepfx Ag Tol Auxiliary Acceleration Cylinders: 2 units Approx. Press Height: 5600 mm Approx. Press Width: 3250 mm Approx. Press Depth: 2200 mm Lower Table Height from Floor: 1400 mm Pre-fill Valve: NG 150 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Transducer: NOVATECHNIK or TURCK PLC System: DELTA Touch Screen Panel: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approx. Weight: 24 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: used, offer consist of: - control for stitching wire Giedpfx Agou Srv He Tol Horizon stitching wire control function: prevents the stitching wire is used up completely and must be threaded into the stitching head - compatibel with: Horizon SPF-200A

Condition: excellent (used), Year of construction: 2006, operating hours: 32,000 h, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 370 mm, travel distance Z-axis: 410 mm, Fanuc Alpha 1iC XL – extra high Z travel: 410 mm Excellent condition – fully operational Gedpfx Agex Htd Ao Teil Year of manufacture: 12/2006 Approx. 32,000 operating hours Control: Fanuc Alpha 180is-WB 5 axes: X: 550 mm / 900 mm/min rapid traverse Y: 370 mm / 900 mm/min rapid traverse U: 120 mm / 450 mm/min rapid traverse V: 120 mm / 450 mm/min rapid traverse Z: 410 mm / 900 mm/min rapid traverse Max. workpiece weight: 1000 kg Maximum cutting angle: 30° Automatic wire threading Weight approx. 3.1 t Without screen above the control unit Availability: very soon Loading possible

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, total height: 2,154 mm, total length: 2,050 mm, total width: 2,234 mm, workpiece height (max.): 220 mm, workpiece width (max.): 550 mm, workpiece length (max.): 800 mm, overall weight: 2,450 kg, warranty duration: 6 months, GF Machining Solutions CUT P350 Year of manufacture: 2020 Giodpfxexywz Ao Ag Tsl AC CUT HMI-2 control system Travel paths (X / Y / Z): 350 x 220 x 220 mm Travel paths (U / V): 350 x 220 mm Max. taper angle: +/- 30° at 200 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 800 x 550 x 220 mm Maximum workpiece weight: 750 kg Cutting speed: 400 mm²/min Best surface finish: Ra 0.08 µm Available wire diameters: 0.15 mm to 0.33 mm Overall system dimensions: 2050 x 2234 x 2154 mm Total system weight: 2450 kg The machine will be cleaned, completely overhauled, and tested for all functions by us after receipt of order. We are pleased to offer you commissioning of the machine as well as operator training on the control system.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, The fully automatic Alpha 530 single-core cable processing machine for crimping and fitting rubber seals on both sides meets the highest quality standards for cable cross-sections from 0.13 to 6 mm². Gedpsx H Ualefx Ag Teil

Condition: used, Year of construction: 2005, Machining paths X/Y/Z: 350mm/220mm/220mm, table dimensions X/Y: 680mm/450mm. max. workpiece weight: 750kg, max. workpiece dimensions X/Y/Z: 1000mm/550mm/250mm. Wire diameter range: 0.1mm-0.3mm, wire spool size: 8kg, skewing capacity: 0°-30°. Dimensions X/Y/Z: 2020mm/2050mm/2000mm, weight: approx. 2500kg, operating hours: approx. 60000. Gedpfx Asx E Ulxeg Teil

Condition: used, Year of construction: 1984, functionality: fully functional, machine/vehicle number: D12L/8271, Offer Number: D12L/8271 Machinetype: wire nail press Make: WAFIOS Type: N51 Constr. year: 1984 diameter range: 2,2-4,2 mm Gisdewi Tgiopfx Ag Tsl nail length: 13-105 mm output - pieces/min: 430 Location: In our warehouse

Condition: ready for operation (used), Colchester Triumph 2500 Lathe Swing over bed: 400 mm Gedpfx Aexfrgdog Teil Swing over cross slide: 246 mm Distance between centres: 1270 mm Centre height: 195 mm Max. turning diameter: 585 mm Spindle motor power: max. 7.5 kW Spindle speed: max. 2,500 rpm Infinitely variable spindle speed ranges: - low: 14–300 rpm - medium: 36–830 rpm - high: 109–2,500 rpm Overall dimensions: 2,600 mm x 1,300 mm x 1,800 mm (L x W x H) Accessories: 5 Multifix tool holders Steady rest Live and dead centers Drill chuck Jaws Cabinet Coolant pump You are welcome to come and inspect the machine. We are happy to organize affordable shipping for you. You will receive a proper invoice. A net invoice can be issued for international customers with a valid VAT ID number. Subject to prior sale. Visit our shop and see our other offers. The company names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Technical data may be subject to deviations, and errors in the item description may occur and are reserved.

Condition: excellent (used), Year of construction: 2017, operating hours: 7,166 h, functionality: fully functional, workpiece weight (max.): 3,000 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 510 mm, total height: 2,815 mm, total length: 3,475 mm, total width: 3,130 mm, This machine is very well maintained and in excellent condition. You can inspect and test this machine under power. Price is ex works, without dismantling. Manufacturer: Mitsubishi Electronic Year of manufacture: 2017 MODEL: MV4800 Operating hours: approx. 7,166 hrs Application type: Wire EDM Machine type: Wire-cut EDM machine Technical Data – Mitsubishi MV4800 General Information Width: 3,130 mm Depth: 3,475 mm Height: 2,815 mm Weight: 5,700 kg Movements X-axis travel: 800 mm Y-axis travel: 600 mm Z-axis travel: 510 mm U/V travel: 200 (+/-100) mm Workpiece Diameter over bed: 1,250 mm Diameter over saddle: 1,020 mm Workpiece diameter: 505 mm Maximum table load: 3,000 kg Worktable External length: 1,080 mm External width: 780 mm Price significantly reduced. This machine is being sold due to business relocation. Gsdpfx Ajvdu Hzsg Toil

Condition: refurbished (used), Year of construction: 2003, functionality: fully functional, workpiece weight (max.): 450 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, High-precision wire EDM machine at a special price! Godpfoxx Tgxox Ag Tjil AGIECUT Excellence 2 Year of manufacture: 2003 Travel paths (X/Y/Z): 350 x 250 x 256 mm Travel paths (U/V): +/- 70 mm Maximum taper: 30° at 100 mm Maximum workpiece dimensions (length/width/height): 750 x 550 x 250 mm Maximum workpiece weight (with/without tank): 200/450 kg Best achievable surface finish: 0.1 µm Ra Maximum cutting rate in cylindrical cut: 300 mm²/min Available wire diameters: 0.10 - 0.33 mm Including AGIE universal clamping frame Including AGIE Jogger handbox Including console with 4x USB ports Including AGIE-Setup 3D The machine has been cleaned, overhauled, and thoroughly tested by our technicians. We are also happy to offer commissioning and training on request.

Condition: good (used), functionality: fully functional, Gitterbox emptying, pneumatic, for gitterboxes 1200 x 800 mm Dimensions: 2200 x 1700 x 2250 mm (LxWxH) Weight approx. 1500 kg Note: The machine is in good condition. It was checked and tested by us in 28816 Stuhr. You can find the video above in the pictures, or on our website or our YouTube channel. Inspections, even under power, are possible at any time by arrangement. Video calls are possible on request. We are happy to answer questions about the machine by phone from Monday to Thursday from 8 a.m. to 2 p.m. On Friday we are there for you from 8 a.m. to 1 p.m. Please note: All technical data refers to information provided by the manufacturer. We accept no liability for the information provided or any errors. The offers are non-binding, subject to prior sale and can be revoked at any time. Gijdpfx Ajv Nhk Dsg Tsl Viewings are possible by arrangement. The sale takes place ex location, without warranty or guarantee. Our payment terms are 100% advance payment.

Condition: good (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 03DR2150, workpiece weight (max.): 1,500 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, total height: 2,150 mm, total length: 2,687 mm, total width: 3,030 mm, overall weight: 3,500 kg, Equipment: cooling unit, Wire-Cut EDM Machine The machine comes from productive operation and is in fully functional, used condition. All relevant assemblies are complete; the generator cabinet, control system, wire feed, and AT system (Automatic Threader) are all present and complete. Running times according to control system: Processing time: approx. 29,062 h NC on-time: approx. 43,836 h Ready-/TFT downtime: approx. 8,966 h Maintenance records (excerpt): Filter change: last performed at 176 h / 200 h Resin change: 21 h / 1000 h Oil refill: 742 h / 1000 h Conductivity sensor: 742 h / 1000 h Current supply rotation: 57 h / 80 h The machine is complete but shows typical signs of use after more than 10 years in operation Accessories are extensive and well organized Servicing always confirmed as per control system Automatic threading system included Accessories / Equipment: Original Mitsubishi nozzle & roller/bearing kit: various guide rollers upper and lower diamond guides nozzle set (upper/lower nozzle) drying stones / assembly tools NSK/Japan replacement bearings spare tension rollers Manufacturer’s wooden box Mitsubishi Electric Spare and consumables: resin container (packed) filter elements quick adhesive components A/B pH test strips process chemicals (for EDM) logbook / maintenance records Gsdsx Hadvepfx Ag Tsil Documentation / manuals: complete folders: Operator’s Manual MV Part 1 & 2 training materials “Advance Series” operating instructions (German) maintenance and AT maintenance sheets Travels (X / Y / Z): 600 × 400 × 310 mm Working table / workspace: table size: 840 × 640 mm (square table) max. workpiece dimensions: 1050 × 800 × 295 mm max. workpiece weight: 1,500 kg Wire data: wire diameter: 0.1–0.3 mm max. wire feed: 23 m/min tension: 0.5–25 N automatic threading (AT), including fine-threading Taper cutting: opto-linear T/C device, ±75 mm (X/Y), max. taper angle 15° at 260 mm workpiece height Generator / Control system: transistor-controlled pulse generator 15" LCD touch control 6-axis simultaneous control integrated 2D and 3D CAM (Parasolid viewer) NC memory up to 1 GB USB interfaces (2×) Dielectric system tank capacity: 860 l filter flow rate: 50 l/min paper filters (2 pcs) resin container 10 l (ion exchanger)

Condition: used, Year of construction: 1981, functionality: fully functional, machine/vehicle number: D48E/7965, Offer Number: D48E/7965 Machinetype: barbed wire machine Make: WAFIOS Type: STH2 Constr. year: 1981 line wire diameter: 1,6-2,8 mm point wire diamter: 1,4-2,5 mm Gedpfx Agjx Ea E Ij Tsil output - meter/min: 25-38 Location: Europe

Condition: good (used), Year of construction: 2008, Cutting hours: 7922 h Fanuc 310 iS-WA CNC Gijdpfx Agex Dit Sj Tjl X/Y/Z travels: 370 × 270 × 255 mm Max workpiece size: 700 × 600 × 250 mm Tank dimensions: 770 × 600 mm U axis: ±60 mm V axis: ±60 mmMachine fully overhauled by Fanuc

Condition: excellent (used), Year of construction: 2017, operating hours: 8,500 h, functionality: fully functional, workpiece weight (max.): 1,500 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, total height: 2,150 mm, total length: 2,687 mm, total width: 3,030 mm, workpiece height (max.): 305 mm, workpiece width (max.): 1,050 mm, workpiece length (max.): 820 mm, type of input current: AC, table width: 840 mm, overall weight: 3,500 kg, table length: 640 mm, positioning accuracy: 0.003 mm, ### Price heavily reduced ### This machine is very well maintained and in very good condition. The machine is still in production. You can view and test this machine with power on. Price is ex works, without dismantling. Manufacturer: Mitsubishi Electronic Year of manufacture: 2017 Gjdpsvq Rh Ujfx Ag Tjil MODEL: MV 2400R MV-R Series – Power for Precision Production hours: approx. 8,000 hours Application type: EDM / wire cutting Machine type: Wire EDM machine Technical specifications - Mitsubishi MV 2400R X-axis movement: 600 mm Y-axis movement: 400 mm Z-axis movement: 310 mm Travel (X / Y / Z) in mm: 600 / 400 / 310 Travel (U / V) in mm: 150 / 150 (+/- 75) Max. workpiece dimensions (W x D x H) in mm: 1050 x 820 x 305 Max. workpiece weight in kg: 1500 Table dimensions (W x D) in mm: 840 x 640 Overall dimensions (W x D x H) in mm: 2687 x 3030 x 2150 Machine weight in kg: 3500 Price greatly reduced.

Condition: refurbished (used), Year of construction: 2019, functionality: fully functional, GF AgieCharmilles CUT E 600 – Used Wire EDM Machine, Year of Manufacture 2019 The GF AgieCharmilles CUT E 600 from 2019 is a high-precision and reliable used wire EDM machine, setting new standards in productivity, precision, and operating comfort through Swiss engineering and state-of-the-art technology. It is designed to meet the highest demands in tool and mold making, medical technology, and precision manufacturing. Main Features & Benefits ✅ Large Working Area and Robust Construction Traverse paths (X/Y/Z): 600 x 400 x 350 mm Traverse paths (U/V): ± 50 mm Max. workpiece size: 1030 x 800 x 350 mm Max. workpiece weight: 1,000 kg T-shaped design with a lowerable door for easy loading even of heavy workpieces ✅ Maximum Precision and Repeatability Glass scales on all axes for long-term accuracy without recalibration Contour accuracy up to ± 2 µm, surface roughness up to Ra 0.12 µm Thermally stable construction for consistently precise results ✅ State-of-the-Art Digital Generator (IPG) Up to 18% faster processing compared to previous models Anti-electrolysis technology for improved surface quality and increased service life Automatic power adjustment (POWER-EXPERT) to prevent wire breakage TAPER-EXPERT for taper cuts up to 30° over 77 mm height ✅ Intelligent Control – AC CUT HMI with 19” Touchscreen Windows-based control system with intuitive user interface 3D graphics, DXF import, and real-time process monitoring PART-EXPERT and WIRE-EXPERT for optimal cutting conditions and precise results Remote control included as standard ✅ High Productivity and User Friendliness Automatic threading and re-threading, even for hard wires Large 25-kg wire spool for extended operation times Energy-saving ECONOWATT system reduces idle power consumption to < 1 kW Compact footprint (approx. 4 m²) for optimal integration into any workshop Ideal For: ✔ Tool and mold making ✔ Precision components from steel, carbide, or copper alloys ✔ Series production and small batch manufacturing with high quality standards 📌 Our used 2019 machine undergoes professional cleaning, servicing, and thorough testing prior to sale to ensure maximum quality and reliability. Giodpfxoxwk Ane Ag Tol 📩 Contact us for a customized offer or a demonstration!

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, wire diameter (max.): 10 mm, input frequency: 50 Hz, workpiece weight (max.): 70 kg, type of input current: three-phase, Equipment: cooling unit, OMEGA CM43 Submerged EDM wire The OMEGA CM43 submerged EDM is still connected and working perfectly. This machine achieves the highest precision and is an ideal choice for smaller workshops. Working area (mm) 500 x 350 x 300 Electrode size (mm) 100 x 100 x 100 Giedpfx Aewr Utiog Tjl Capacity (kg) 70 Electrode mass (kg) 10 Axis travel: X430, Y320 mm dieletric tank: T4 model power supply: 50A Omega Pulse If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: used, wire diameter - max. 10 mm Gedpfowu Hg Hox Ag Toil wire diameter - min. 3 mm wire length 8 m total power requirement 7,5 kW weight of the machine ca. 1,1 t dimensions of the machine ca. LxBxH 2,53 x 0,75 x 1,1 m

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, workpiece weight (max.): 1,500 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, total height: 2,340 mm, total length: 2,600 mm, total width: 2,600 mm, workpiece height (max.): 400 mm, workpiece width (max.): 700 mm, workpiece length (max.): 1,200 mm, overall weight: 3,300 kg, warranty duration: 6 months, GF AgieCharmilles CUT 300 Year of manufacture: 2013 Gisdpfxoxwktme Ag Tjl Charmilles Millenium Control Travel paths (X / Y / Z): 550 x 350 x 400 mm Travel paths (U / V): 550 x 350 mm Maximum taper angle: +/- 30° at 400 mm height Integrated Collision Protection (ICP) on all 5 axes Manual tank door (accessible from one side) Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Cutting speed: 340 mm²/min Best surface finish: Ra 0.10 µm Available wire diameters: 0.15 to 0.33 mm Dimensions of the complete unit: 2600 x 2600 x 2340 mm Total weight of the unit: 3,300 kg The machine will be cleaned, fully overhauled, and functionally tested by us after the order is received. You will receive a 6-month warranty on the machine. We are happy to offer you commissioning of the machine.

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, workpiece weight (max.): 450 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, AGIECUT Vertex 2 Year of manufacture: 2007 Gsdpfx Agoxwb Sts Tjil Travel paths (X/Y/Z): 350 x 250 x 256 mm Travel paths (U/V): +/- 70 mm Maximum taper: 30° at 100 mm Maximum workpiece dimensions (length/width/height): 750 x 550 x 250 mm Maximum workpiece weight (with/without bath): 200/450 kg Best achievable surface finish: 0.05 µm Ra Available wire diameters: 0.07 - 0.33 mm Includes AGIE universal clamping frame Includes AGIE JOGGER handbox Includes console with USB interface The machine will be cleaned, overhauled, and tested by us upon receipt of order. Commissioning and training can also be offered on request.