Used Wire Edm for sale (3,170)

Condition: good (used), Year of construction: 1980, Technical Details ; Wire Diameter - 1.2- 4,5 mm Nails lenght - 10- 150 mm Capacity - 800 kg/h List of equipment : 1x Wafios S150 2X Wafios S120 1x Kovopol THA 60 1X Kovopol THA 100 1X Moroni SPND 80 2x Nails polishing machine Wire Drawing Line SKET 5 Blocks Wire input - max. 6,0 mm Gujdpfx Akovfc A Tsyoc Complete nail making plant in good working condition !! wire output - min. 2,5 mm

Condition: used, Year of construction: 1989, Model - 600/6 Year - 1989 Dies suitable for drawing low carbon steel wire rod entry diameter 5.5/6 mm max. They are two mirror dies and one has 5 steps and the other 6 steps. All with 600 mm shooting capstans. Guedpfx Akjyubh Rsyec They both have a vertical skein for winding yarn onto loops. DC electrical equipment included. The dies will be sold in their "used, working, seen and liked" condition.

Condition: excellent (used), Year of construction: 1995, Combination Unit: Manufacturer: GSG Feeder: Type: 840.02-027 Crusher Descaler: Type: 663.02-017 Wire Range: Ø5.5-16mm For wire rod with approx. 40-60 daN/mm² strength Crushing and Bending Rollers: Carbide Inserts Adjustment with 0.37 kW - 1.15 A gear motor Brush Drive with 0.25 kW gear motor, n=293 rpm Connection Voltage: 380-420 V 50 Hz Dry Coating Unit: Type: BSG/T Filling: Calcium Stearate (e.g., Traxit Type: D S 51 E) Stearate Consumption: approx. 350 g per t of wire Drawing Speed: max. 15 m/s Electrical Power: 2x 0.55 kW gear motors Cassette: 2 slots (supplied with 1x roller block + 1x cassette) Type: PKG/T (TS) Cleaned rolled wire Wire strength approx. 40–60 daN/mm² Wire range max. inlet diameter 9.5mm, finished diameter 3.5–8.5mm Roll dimensions min. Ø115mm, max. Ø125mm, Bore diameter Ø82mm, width 15–25mm Cooling pin diameter 25mm Cooling water consumption approx. 600 l/h Drawing machine: Manufacturer: Koch Type: KHZ 5000 Year of manufacture: 1993 Gsdpfxor Nfvmj Akysuc Serial number: 13.821 Number of draws: 1 draw per block Drawing drum: Ø700mm Tensile force: mechanical 5000 N Wire material: mild steel wires Run-in strength: approx. 40 – 45 daN/mm² Maximum drawing range: Inlet diameter 5.0 – 8.5mm Cross-section reduction: 20 x 25% (mechanical gradation) Drawing speed: up to max. 7.0 m/s Brake: Twiflex, type: MRB Drive: AC motor/frequency converter, Siemens PN=110 kW, n=1485 rpm Spooler: Manufacturer: Koch Type: KHS 1250 Year of manufacture: 1993 Factory No.: 13741 Wire diameter: 5 – 8.5 mm Strength: approx. 55 – 70 daN/mm² Winding speed: V=7 m/s, adapted to the drawing machine Filling weight: approx. 3000 kg Spool drive motor: Three-phase motor with external fan Type: 1 PQ 6253 – 6 AA 70- Z A 15 + K 20 + C 14 + H 46 P=37 kW, n=1000-2000 rpm, IP54, design B3 Laying drive motor: 66-671U, 1.5 kW, 170 V, 9.8 A, 1680 rpm, IP 44, B5-200 With Attached tachometer generator TG 20, 20 V / 1000 rpm With attached spur gear SK 32, i=57.53, design B6 Hydraulics: Hydraulic excavator type: H13 AK Pneumatics: Twiflex disc brake type: MRB Pneumatic cylinder type: SPWG 28032-25mm stroke Dimensions: 3100 x 3000 x 1700 mm (L x W x H) without counterweight

Year of construction: 2017, condition: like new (used), 2D Wire Bending Machime Year - 2017 Manufacturer - VIBRA Wire diameter - 1-4 mm Capacity - 30pieces/ min Power - 3,5 kw Gujdpsmqk Tpsfx Akyjc

Year of construction: 1997, condition: good (used), Machine info: EVG Polybend stirrup machine PBE 2-16 come with 2 Pay offs - build in 1997 comes with a complete new control unit - original EVG Single wire: 6 –16 mm Twin strand: 6 –12 mm Voltage 400 Volt 50 Hz 30 Kw Production year: 1997 Gusdpfx Ajn Ut A Sskyoc

Condition: good (used), Year of construction: 1997, High-speed EDM drilling machine, KOTON Type: EDM-KTH-202A.. Gjdpfowmn Szsx Akyjuc In good condition with cooling and filter unit. Machine documentation available. See data sheet for specifications.

Condition: excellent (used), Wire Straightening Devices for Wire and Rods Most units are from the manufacturer Witels Albert, but there are also other brands available. The smallest straighteners are suitable for wire diameters of 0.5 – 0.8 mm, with the largest accommodating up to approximately 16 mm. Gjdpfjy Eyzfjx Akyeuc All devices have been inspected and are clean. I am selling these at approximately 50 – 60% of the original price.

Condition: used, Year of construction: 2022, Mitsubishi MV2400R High-Precision Wire Electro-Discharge Machine. Serial No. 52DU2438 (2022), Mitsubishi D - Cubes Series Control, Max Workpiece Dimensions 1050 x 820 x 305mm, Max Workpiece Weight 1500kgs, Travel X/Y/Z/U/V = 600/400/150/150mm, +/-75mm, Machine Weight 3500kg. Please note: This lot has been professionally decommissioned Gujdpfx Aezbat Sjkyjc Location: This lot is located in Burton-on-Trent. A charge of £450 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: used, Year of construction: 2022, Mitsubishi MV2400R High-Precision Wire Electro-Discharge Machine. Serial No. 52DU2438 (2022), Mitsubishi D - Cubes Series Control, Max Workpiece Dimensions 1050 x 820 x 305mm, Max Workpiece Weight 1500kgs, Travel X/Y/Z/U/V = 600/400/150/150mm, +/-75mm, Machine Weight 3500kg. Gusdpfx Aszbamxskyec Please note: This lot has been professionally decommissioned Location: This lot is located in Burton-on-Trent. A charge of £450 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: good (used), functionality: fully functional, Gitterbox emptying, pneumatic, for gitterboxes 1200 x 800 mm Dimensions: 2200 x 1700 x 2250 mm (LxWxH) Weight approx. 1500 kg Note: The machine is in good condition. It was checked and tested by us in 28816 Stuhr. You can find the video above in the pictures, or on our website or our YouTube channel. Inspections, even under power, are possible at any time by arrangement. Video calls are possible on request. We are happy to answer questions about the machine by phone from Monday to Thursday from 8 a.m. to 2 p.m. On Friday we are there for you from 8 a.m. to 1 p.m. Please note: All technical data refers to information provided by the manufacturer. We accept no liability for the information provided or any errors. The offers are non-binding, subject to prior sale and can be revoked at any time. Viewings are possible by arrangement. The sale takes place ex location, without warranty or guarantee. Guedpfov Nhk Djx Akyjc Our payment terms are 100% advance payment.

Condition: used, Year of construction: 1975, Technical details: table length: 430 mm table width: 270 mm x-axis: 300 mm y-axis: 240 mm Guedpfx Aksu Nu Elsyoc z-axis: 250 mm total power requirement: 2 kVA weight of the machine ca.: 0,72 t weight: Schaltschrank: ca. 200 kg space requirements of the machine approx.: L:0,9 x B:1,0 x H:2,1 m START HOLE EROSION MACHINE - size of cooling pond: 1000 x 510 x 900mm - incl. electric cabinet: 600 x 550 x 1400mm Machine is on sale as is, without been checked and will be sold as is! i.D. *

Condition: used, Year of construction: 1997, functionality: fully functional, type of input current: three-phase, year of last overhaul: 2012, Basic information: Control system: Siemens S7-400 Technical details: Material processed to date: Steel wire Number of drawing steps: 12 Technical condition: New electrical system in 2012 Maximum inlet wire diameter: 4 mm Minimum inlet wire diameter: 3 mm Maximum finished wire diameter: 1.3 mm Minimum finished wire diameter: 0.78 mm Maximum inlet wire tensile strength: 1225 N/mm² Number of blocks: 12 Block axis: vertical Drawing die diameter: 450 mm Drawing die thickness: 43 mm Drawing die diameter: 27 mm Water pressure: min. 2 bar Control method between drawing dies: Guide rollers Air pressure: 6 bar Drawing die cooling: Water Drawing die cooling: Water Drive type: Three-phase motor Motor manufacturer: SIEMENS Drive power: 22 kW Motor controller: Siemens Sinamics Operating voltage: 400 V Gusdjzb N Raepfx Akyec Frequency: 50 Hz Electrical cabinet: present Guide rail: present Production direction: from left to right Consisting of: KOCH unwinder KOCH dancer KOCH KHS 800 S single spooler

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 73, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 350 mm, type of input current: three-phase, input voltage: 400 V, overall weight: 3,000 kg, input frequency: 50 Hz, input current: 12 A, Equipment: documentation/manual, We are offering this well-maintained AGIE HYPERSPARK 2 EXACT die-sinking EDM machine, year of manufacture 2004. Model: HYPERSPARK 2 EXACT Installation serial number: 73 Serial number: 30.303 Gedpfey Hfavex Akyeuc Year of manufacture: 2004 Power consumption: 628.702 Weight: 3,000 kg Voltage: 3 × 400 V Frequency: 50 Hz Power: 8.3 kVA Rated current: 12 A Short-circuit current: 10 kA 20-position automatic tool changer If you have any questions or require further information, please feel free to send us a message or contact us by phone.

Condition: good (used), Year of construction: 1997, Parts shown by hand not come. Gujdpopy Errjfx Akysc

Condition: used, Year of construction: 2004, Working range 1.050 x 650 x 250 mm max. workpiece weight 400 (800) kg control Agievision AGIE max. conicity 30° / 100mm travel -x axis 500 mm travel -y axis 350 mm travel -z axis 426 mm travel U x V-axis mm rapid traverse X-axis 3 m/min rapid traverse Y-axis 3 m/min rapid traverse U-axis 0,6 m/min rapid traverse V-axis 0,6 m/min rapid traverse Z-axis 0,6 m/min wire dia. 0,2...0,33 mm total power requirement 12,1 kVA Gedjw Spa Njpfx Akysuc weight of the machine ca. 3,9 t dimensions of the machine ca. 2,8 x 2,4 x 2,3 m Wire Eroding Machine AGIE - Agiecut Progress 3

Condition: good (used), Year of construction: 2013, operating hours: 1,000 h, functionality: fully functional, SODICK AG 600L CNC wire EDM machine with an extensive accessory package, in excellent condition, a wonderful machine, hardly used. For sale is a high-quality SODICK AG 600L CNC wire EDM machine with SODICK LP2W control, linear drives, and extensive additional equipment. Manufacturer: SODICK Model: AG 600L Machine type: CNC wire EDM machine / wire erosion system Control: SODICK LP2W Commissioning: 07/2013 according to documentation Operating hours: approx. 1,000 hours according to documentation Power generator: 40 A Max. workpiece size: 800 x 570 x 340 mm Travel range X/Y/Z: 600 x 380 x 350 mm Wire diameter: 0.10 - 0.30 mm Machine equipment: Linear drives in X, Y, U, and V axes Glass scales in X, Y, U, and V axes Remote control LAN port Special corner control strategy Flash memory Automatic high-speed AWT 10-year warranty on positioning accuracy according to the original SODICK documentation Wire chopper complete, suitable for AG 400L and AG 600L Additionally included according to documentation: SODICK K1C CNC high-speed drilling machine / starting hole drilling machine Installation / initial training according to documentation Training course according to documentation Clamping system / accessories according to documentation: SMART GRIP adjustable pallet 3D, fixed SMART GRIP prism, clamping width 10 - 100 mm Godpfx Akey Tabnsyouc SMART GRIP adapter 90° indexable SMART GRIP clamping jaw, movable SMART GRIP prism jaw SMART GRIP jaw set SMART GRIP jaw set 2 SMART GRIP clamping accessories M8 SMART GRIP slide 475 mm, hardened and rust-resistant SMART GRIP VICE slide 475 mm, hardened and rust-resistant Additional BASIC SET PLUS AG600L, pitch 475 mm, consisting of: Pneumatic control unit P-clamp, pneumatic 2 x 3D adjustable pallet Vise Uni-holder / holder Clamping set Preset plate with carriage Programming system according to documentation: DCAMCUT 8.0 EXPERT / Solut Machining module DCAMCUT EXPERT EDMCAD A Material removal simulation Approximation 4-axis roughing Roughing with predefined islands Partial roughing Spatial curve machining Standard 4-axis NC processor Datakit CAD direct interface CATIA V5 / 3D to SolidWorks, import The machine is ideal for precise wire erosion work in toolmaking, mold making, fixture construction, and precision manufacturing. Note: All information has been taken from the available documentation. The year of manufacture, current operating hour counter, machine weight, and external dimensions should be checked again directly on the machine before sale or inspection.

Condition: used, Year of construction: 2020, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, workpiece weight (max.): 1,000 kg, total height: 2,858 mm, total width: 1,600 mm, total length: 2,700 mm, table width: 800 mm, table length: 600 mm, workpiece width (max.): 1,000 mm, feed length X-axis: 600 mm, feed length Y-axis: 400 mm, Allow us to introduce the state-of-the-art AgieCharmilles FORM E600 electro-discharge machining (EDM) machine, designed for the most demanding applications in precision machining and mold making. This model is among the most reliable EDM machines in its class, offering exceptional precision, stability, and efficient operation. Manufacturer: GF Machining Solutions Gujdpfx Akozcxv Ijysc Model: AgieCharmilles FORM E 600 Machine Type: CNC EDM die sinking machine Key Features: • Powerful ISPG (Intelligent Speed Power Generator) • Machining of steel, carbide, and other conductive materials • Precise linear measurement on the X, Y, and Z axes • Integrated CNC rotary axis C • Automation and unmanned operation capability • AC FORM touch control with a technology database • Surface finish up to Ra 0.1 μm • Max. machining current: 140 A • Suitable for the production of molds, tools, die-casting dies, and precision parts. Technical Specifications Machine: • Construction: Stabilized cast iron cross table • Machine dimensions (W × D × H): 1600 × 2700 × 2858 mm • Footprint: 2020 × 2700 mm • Machine weight (without dielectric): 4400 kg Axis Travels: • X: 600 mm • Y: 400 mm • Z: 400 mm • X/Y axis speed: 4 m/min • Z axis speed: 6 m/min • Positioning resolution: 0.1 μm Work Area: • Tank: 1200 × 800 × 500 mm • Work table dimensions: 800 × 600 mm • Clamping height from the floor: 900 mm • Table – chuck distance: 190 – 590 mm Workpiece and Electrode: • Max. electrode weight: 100 kg • Max. workpiece weight: 1000 kg • Max. workpiece dimensions: 1000 × 700 × 400 mm • Dielectric level: 150 – 450 mm Dielectric System: • Tank volume: 750 l • Filtration: 6 H15 paper filters (3–5 μm) Generator: • Type: ISPG • Max. machining current: 140 A • Best achievable surface roughness: Ra 0.1 μm Control: • Operating system: Windows • Control: AC FORM • 17" LCD display • Touch screen, keyboard, mouse, and remote control • TECFORM expert system C-Axis: • Max. electrode weight in automatic chuck: 25 kg • Speed: 0 – 100 rpm • Max. moment of inertia: 2000 kgcm² • Positioning accuracy: 0.001°

Condition: like new (used), Year of construction: 2019, operating hours: 2,607 h, functionality: fully functional, Equipment: documentation/manual, Selling a PEMTec PEM800 in like-new condition. Year of manufacture: 2019. The machine can be inspected and tested while powered on. Operating hours: 9880 PEM time: 2607 Pulse output current: 6000A HOW THE PROCESS WORKS Metal parts are processed in a contactless and precise manner using this process. An electrically conductive electrolyte, saltwater, is introduced between a negatively charged tool electrode (cathode) and a positively charged workpiece (anode). This carries the ionized material anodically away in the processing gap between the electrode and the workpiece. In this process, the electrode is mirrored onto the metal. The targeted current pulse, the oscillating tool electrode, and the very small working gap are the basis for the precision of the technology. The PECM process is an advanced version of electrochemical sinking. By using a synchronized current pulse and an oscillating tool electrode, PEMTec creates the basis for a very small processing gap. This allows for highly precise and economical manufacturing without process-related tool wear. Completely contactless and without thermal or mechanical influences, workpieces are produced with an accuracy and repeatability in the lower micrometer range and a surface finish of up to 0.03 μm. TECHNICAL DATA › Machine frame made of natural granite › Usable working area 375 - 545 mm (min./max.) › Machine table 660 × 540 mm (W × D) › Space requirement 2,200 × 2,560 × 2,870 mm (W × D × H), without electrolyte treatment › Maintenance-free, high-precision working axis with direct drive › Fixture mounting via 6 T-slot rails (M10) in the machine table Guedpoy Etcvefx Akyjc › Real-time system for process control and short-circuit detection › HMI via a 21.5-inch touchscreen › Water-cooled, modularly designed generator from 1,200 A to 12,000 A › Automatic electrolyte treatment system › Optional XY adjustment aid and C-axis › The performance of the electrolyte system is optimally tailored to the respective application. Standard systems are available from 1,000 and 2,000 liters.

Condition: good (used), Year of construction: 2012, functionality: fully functional, workpiece weight (max.): 4,100 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, CNC Control without coolant device Technische Daten – technical details: Verfahrweg X / travel X 350 mm Gsdpfxjy S Tp Aj Akyjuc Verfahrweg Y / travel Y 250 mm Verfahrweg Z / travel Z 250 mm Verfahrweg U / travel U +-45 ° Verfahrweg V / travel V +-45 ° max. konischer Schnitt / max. cone cutting +-10 ° Max. Dimensionen des Werkstücks / max. dimensions of the workpiece 820x680x250 mm Tischabmessungen / table size 700x480 mm max. Werkstückgewicht / max. workpiece weight 4100 kg Gewicht ca. / weight ca. 2640 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: good (used), Year of construction: 1995, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, workpiece weight (max.): 500 kg, workpiece length (max.): 800 mm, workpiece height (max.): 500 mm, feed length X-axis: 600 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, tank capacity: 500 l, space requirement width: 3,000 mm, space requirement length: 3,000 mm, The machine is used daily and provides accurate and precise results. All machining operations can be programmed via the control unit, and the automatic electrode change can also be programmed. It includes an EROWA chuck and probe, along with numerous accessories and clamping devices. We can assist with loading the machine onto the transport vehicle using our own crane. Guodpfx Aozc E Dxokysc

Condition: used, Electric hoist, crane, electric wire rope hoist, wire rope winch DEMAG type P 10 Serial no. 941 477 Year of construction 1962 Lifting capacity 2000 kg with 4 ropes Lifting height 5 meters Lifting speed 6 m/min. Fine lifting speed 1.3 m/min. Reeving 4/1 Motor power 0.6 / 2.6 kW Gusdsr E Ht Hjpfx Akyec Mains connection 380 Volt, 50 Hz - DEMAG hoist, type 19/11 K28P - Electric trolley DEMAG, type 13 / 6 K8 - 1 Travel speed approx. 19 m/min - Trolley for double T-beams, beam width 120 to 180 mm - Load hook for 4 load lines - Operating cylinder for the hoist with approx. 2.5 meter cable length Space requirement L x W x H 1400 x 900 x 500 mm Weight 350 kg Good condition

Condition: used, Year of construction: 1970, functionality: fully functional, machine/vehicle number: D60I/8489, Offer Number: D60I/8489 Machinetype: wire weaving loom Make: EIGENBAU Type: wireloom Constr. year: 1970 wire diameter range: 1,5-7 mm mesh width: 15-80 mm line wire distance: 15-80 mm working width: 2100 mm Godozbcthjpfx Akyjuc mesh width automatic: 200 mm output - strokes/min: 22 Location: Germany

Condition: used, Year of construction: 2004, Sinker EDM machine Manufacturer: Exeron Type: 312 Year of manufacture: 2004 Control system: MF10 Travel ranges X/Y/Z: 450 x 300 x 300 mm Work table: 820 x 400 mm Working tank: 900 x 520 mm Distance table / quill: 150 / 450 mm Electrode weight max.: 30 / 150 kg Workpiece weight max.: 800 kg Filling level of working tank: 300 mm 20-position tool changer Guedpfsytrz Sex Akyjc Generator current: 60 A Power connection: 400 V Three-phase current: 50 Hz Power consumption: 8 kVA Overall dimensions W/D/H approx.: 1,910 x 1,798 x 2,300 mm 3626

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, mitsubishi EA8 cnc zinc spark machine year of construction 2010 c-axis 4-fold changer x,y,z 300 x 250 x 250 mm generator 60 A max. workpiece weight 550 kg Gujdpfx Asyh E N Aokyjc max. electrode weight 25 kg chiller hirschmann mount fire extinguishing system magnet on the table documentation and diskettes machine is connected for inspection

Condition: excellent (used), Year of construction: 2001, operating hours: 27,265 h, functionality: fully functional, Charmilles Roboform 35 with QCRI robot Year of manufacture: 2001 Operating hours: 27,265 Gsdpfx Aoyh E A Nekyeuc X, Y, Z travel: 355 x 255 x 305 mm C-axis with Erowa chuck Erowa chuck on the table Erowa probe Magnet 3 x aluminium Erowa pallets 320 x 320 mm 35 x electrode holders 50 x 50 mm QCRI robot 4 x pallet positions on the table 54 x electrode holder locations Documentation and diskettes Machine powered up for inspection