Used Working Center for sale (63,628)

Condition: used, Year of construction: 2006, x-travel 450 mm y-travel 330 mm z-travel 350 mm control Heidenhain iTNC 530 turning speeds 42.000 U/min tool taper HSK 40 E table surface area 470 x 400 mm T-slots 5 max. table load 500 kg Number of working hours 51993 h spindle hours 13858 h Pgjdexrg Ddepfx Adyeu total power requirement 15 kW In our opinion, the machine is in very good condition and can be condition and can be inspected by appointment. Accessories, illustrated tools and clamping devices are only included in the scope of delivery if this is noted in the additional information . Changes and errors in the technical data and information, as well as subject to prior sale!

Condition: good (used), Year of construction: 2003, 5-Axis CNC Machining Center AXA VPC 40 U Year of manufacture: 2003 Control unit: Heidenhain iTNC 530 Travels: X = 2300 mm vertical / 2000 mm horizontal Y = 1200 mm Z = 600 mm Working area: Width: approx. 3000 mm Table height: Zmin = vertical/horizontal 110/160 mm, Zmax = Zmin + Z travel Rotary table height: Zmin = vertical/horizontal 110/160 mm, Zmax = Zmin + Z travel Tool changer: Double gripper for parallel tool preselection during main time Short tool change times, approx. 6 sec. Tool magazine: Chain magazine with 36 tool stations Tool holders SK40 DIN69871A Psdpfx Ajxrn Tajdyjgu Drive power: 30 kW / 143 Nm 40% duty cycle (Drive no. 110); AC - hollow shaft motor; Speed range: 30 – 10,000 rpm Working spindle: Single-axis swivel head Swivel movement over B-axis in increments of less than 1°, directly programmable from X 0° to X (-) 90°; Locking via Hirth coupling Coolant through spindle External 1100 l coolant tank with rotary filter, manufacturer: KNOLL, and adjustable high-pressure pump up to 30 bar NC rotary table AXA RTA 5S Rectangular faceplate 1100 x 1100 mm; Incl. hydraulic clamping, corresponding NC axis, and direct measuring system; Additional equipment: CNC control: Heidenhain iTNC 530 with digital drive control; Incl. hard disk storage and 15'' TFT display. Data interface V.24/RS232C for data transfer. Thread cutting without compensation chuck. Increased accuracy for X, Y, and Z axes with vertical spindle. Enhanced repeatability, increased positioning accuracy, including thermal compensation in X and Z axes. Measuring systems: Direct linear (manufacturer: Heidenhain), protected. Hinged belt chip conveyor Extraction unit for double-sided extraction with fully enclosed working area Hand rinsing gun for cleaning with coolant. Electronic handwheel with 2 m spiral cable. Tool measuring system TT 130 (manufacturer: Heidenhain) Flat/slideway system:

Condition: used, Year of construction: 2012, axis stroke (X,Y,Z) 760, 408, 508 mm Year 2012 Weight 4500 kg 3d changer 20 fach Psdpfx Adexgn A Djysgu table-size 920 x 360 mm

Condition: good (used), Year of construction: 2019, CNC through-feed center with dual clamp drive in X-direction and gantry design in Y-direction. The second gripper enables trimming down to 15 mm as well as continuous milling movement along the X-axis. The workpiece length is measured (X-direction) via sensor measurement. Working area: X-axis: 3,500 mm Y-axis: 950 mm Z-axis: 80 mm Milling spindle 12 kW HSK-F63, up to 24,000 rpm max. 4-position linear tool changer for milling tools. Max. tool diameter: 120 mm Max. tool length: 100 mm Single pick-up station for ergonomic insertion or removal of tools into the machine. Additionally usable as extra tool positions for up to 11 virtual tools. Podpfxjxrahcs Adyjgu Automatic length measuring system for tools in Z-direction. Drilling head DH 25 8H 1S - 17 vertical spindles - 8 horizontal spindles - Grooving saw in X-direction Dowel insertion unit with 2 tools Dowel diameter: 8 mm, lengths: 20-25-30-35 or 40 mm Air cushion tables at front and rear, foldable Machine software WOODFLASH with: - CNC Board (general machine operation) - Tool database (Tecno-Manager) - Programming editor External workstation license Dongle upgrade: 3D simulator with collision check for WOODFLASH at the machine Release of workpiece at the rear side of the machine Machine is supplied without tools and HSK holders

Condition: used, Year of construction: 2016, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 330 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Siemens, controller model: 840D, workpiece height (max.): 370 mm, table width: 320 mm, table length: 320 mm, table load: 300 kg, rotational speed (min.): 80 rpm, rotational speed (max.): 80 rpm, overall weight: 9,000 kg, spindle speed (min.): 15,000 rpm, spindle speed (max.): 15,000 rpm, spindle motor power: 31 W, spindle nose: HSK 63A, tool length: 250 mm, tool diameter: 125 mm, tool weight: 8 g, control type: CNC control, Equipment: chip conveyor, Hermle C22U 5 Axis Machining Centre Siemens 840D Control 5 Axis Simultaneous Pgsdpfjxpil Sox Adyou XYZ: 450 x 600 x 330mm 320mm diameter table Maximum workpiece diameter 320mm maximum workpiece height 265mm Maximum table load 300Kg A axis -/+ 135 degrees spindle speed 15,000rpm 55 station tool changer Swarf Conveyor Coolant Tool Setter Spindle Probe

Condition: ready for operation (used), Year of construction: 2005, x-travel 400 mm y-travel 450 mm z-travel 350 mm Control Heidenhein iTNC 530 68 fach tool adaptor HSK 40E turning speeds 30.000 U/min fixed table - dimensions 300 x 400 mm mm workpiece weight 200 kg pallet table size 320 x 320 mm feed speeds autom. x/y/z 40 m/min. spindle drive motor 13 kW Pedpfx Adexfb E Asyegu Number of working hours 32369 h total power requirement 16 kW weight of the machine ca. 7.500 kg High-speed 3-axis universal machining center with 7-station pallet changer. Operating hours: 44,899 hours. Load hours: 32,369 hours. Spindle time since replacement: 13,350 hours. Gantry-style machine with a solid monoblock polymer concrete construction, compact linear ball bearings, Heidenhain direct measuring system, hydraulic power unit for tool and pallet clamping, and digital drives with liquid-cooled Siemens AC servo motors. Accessories: 1 BURN refrigeration unit, 1 Keller L-Cut extraction system (built in 2012), PS 32 setup button, and tool blow-off device. Machine dealer with own stock of 1600 m².

Condition: excellent (used), Year of construction: 2020, machine/vehicle number: 11236, We are selling two Scanclimber Twin freight lifts with accessories up to a height of 100 meters. The lifts are first hand, new price per unit 300,000€. Pgedpfxoummt Us Adyou Price is 41000 euros per unit.

Condition: excellent (used), Year of construction: 1999, operating hours: 6,000 h, functionality: fully functional, travel distance X-axis: 505 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 610 mm, feed rate X-axis: 20,000 m/min, feed rate Y-axis: 20,000 m/min, feed rate Z-axis: 20,000 m/min, controller manufacturer: Heidenhain, controller model: TNC 426, workpiece weight (max.): 300 kg, table width: 380 mm, table height: 1,004 mm, table length: 920 mm, overall weight: 250 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 18,000 rpm, spindle motor power: 10 W, Equipment: documentation/manual, rotational speed infinitely variable, The machine is equipped as follows: -Tool holder: SK 30 -Tool changer with 24 places (automatic tool change) -Coolant system -Spindle cooling -Mist extraction Pedpfxov A Tyqo Adyjgu -Chip drawer -RENiSHAW measuring probe

Year of construction: 1990, condition: used, weight max. in kg 230 kg persons to lift, not more than 2 Personen weight 6000 kg working hours, read off 924 height of stroke 18 m electrical . +++++ Podpfxskucuze Adyogu Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 2008, operating hours: 4,864 h, mast type: telescopic, fuel type: diesel, Weights Empty weight: 20.600 kg Functional Lifting capacity: 450 kg Working height: 4.220 cm Identification Serial number: TD105900 Other information Front tyres / undercarriage remaining: 70 Pgodpfexq Azpsx Adysu Rear tyres remaining : 70 Tyre brand: Outrigger Max. horizontal reach: 2000 m Transport dimensions (LxWxH): 14.9x2.5x3.1 Additional information Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2003, x-travel 800 mm y-travel 700 mm z-travel 600 mm turning speeds 12000 1 U/min control Heidenhain total power requirement 59 kW Pjdpfx Aorc Ip Isdyogu weight of the machine ca. 10,6 t

Condition: used, Year of construction: 2011, operating hours: 4,300 h, fuel type: diesel, Weights Empty weight: 7.450 kg Functional Mast: articulated arm Lifting capacity: 230 kg Working height: 1.600 cm Pgodpoxq Axnofx Adyou Identification Serial number: 901149 Other information Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Tyre brand: Solideal Max. horizontal reach: 830 m Transport dimensions (LxWxH): 7.03x2.3x2.37 Additional information Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 1982, centre height ca. 150 mm centre distance 1300 mm vorhanden diameter ca 250 mm Podpfx Adsp Icp Uoyjgu digital readout 1x make Heidenhain u. Werkzeug-Sc serial number 63-06

Year of construction: 1960, condition: used, centre distance 1200 mm Pgjdpfx Adsqwpwhsyju 550 weight of the machine ca. 2,5 t multifix

Condition: used, Year of construction: 1990, . 1990 centre distance 1400 mm 505 mm digital readout . bed bridge . tool adaptor multiple Aufnahme weight of the machine ca. 2,3 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++ Psdpfx Aok N Izmsdyegu

Condition: used, Year of construction: 2000, Number of axles 4 St. 2 Pgjdpfx Aowhq Disdyju tool change unit 20 Plätze spindle turning speed range 20.000 U/min control Siemens 840 D tool taper HSK 63 weight 6670 kg 143-68

Year of construction: 2001, condition: used, M01.43870 frequency 50 Hz voltage 400 V 24 V connected load 48 kW rated current 63 A control Siemens 840 D turning diameter 250 mm Pgjdpfx Aerc Ip Sjdyju turning length 100 mm weight of the machine ca. 7,5 t turning length external / innen 100 mm workpiece length - min. 29 mm workpiece length - max. 100 mm

Year of construction: 1990, condition: used, mitlaufende Spitze taper MK MK5 +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Psdpfx Adjg Sxz Tjyogu Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1999, control Siemens 840D Number of axles 4 St. 2 toll turrets 160 Pgedpfx Ajqn A Rvodysu tool taper HSK 63 spindle turning speed range 24.000 U/min filter unit Ja chip conveyor Ja kW

Condition: used, Year of construction: 2005, revolutions per minute 8000 U/min x-travel 1000 mm y-travel 500 mm z-travel 570 mm Control Siemens weight of the machine ca. 5000 KG Podpsud Al Hjfx Adysgu

Condition: used, Year of construction: 1980, centre height 180 mm centre distance 1250 mm 360 mm spindle bore 41 mm spindle turning speed range 11-2800 U/min weight of the machine ca. 1900 kg Pgedpjub Uxmofx Adyou

Condition: used, Year of construction: 1966, . centre distance 3000 mm Podpoh Uytqsfx Adysgu max. swing diameter 660 mm multifix . steady 2 Stück weight of the machine ca. 5 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 2000, . max. swing diameter 460 mm hollow 66 mm digital . multifix . Psdpfx Adewhqzueyogu centre distance 1000 mm feed: . weight of the machine ca. 1,8 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Year of construction: 2000, condition: used, Aufnahmen Divers K50 Diameter 50 mm +++++ Psdpfx Ajg T Ap Ajdysgu Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1996, coolant ja Axis 3 9041 Pedpfxsud Trwe Adysgu x-travel 800 mm y-travel 550 mm z-travel 500 mm