Used Zayer for sale (25)

Condition: excellent (used), Year of construction: 1996, travel distance X-axis: 10,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 2,500 mm, table length: 12,000 mm, table width: 1,250 mm, year of last overhaul: 2025, workpiece weight (max.): 20,000 kg, New HeidenHain iTNC530 controller in 2015 New bearing in head September 2025 X/Y/Z Linear measuring system IKZ 15 Bar High pressure coolant Central lubrication Optional 2 x floorplates 6000 x 1250 x 245 mm #9240 T-28 with 5 T Slotts and 250 Jump X-Axis: 10000mm Y-Axis: 1500mm Z-Axis: 2500mm Table Length: 12000mm Table Width: 1250mm Cedjxdcbijpfx Ah Usri Table load: 20000Kg Power on spindle: 37kW Spindle speeds: 3500Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 10000mm/min. Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Millinghead auto-index:Orthogonal 1 Degrees 2 sides° Length: 16000mm Width: 4200mm Height: 6800mm Weight: 60000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2008, x-travel 12.000 mm y-travel 1.500 mm z-travel 3.500 mm Cedpfxjxvdunj Ah Ujri feed 20.000 m/min Tool adapter DIN 69871 A50/HSK63

Condition: used, Model 2003 (17,000 working hours) Heidenhain i TNC530 control system Linear travel (X): 7,000 mm Vertical travel (Y): 2,000 mm Cross travel (Z): 1,250 mm Spindle motor output (S1/S6): 37 kW Two-speed gearbox Spindle speed range: 4,500 rpm Spindle taper: ISO 50 Rapid traverse rate: 20/10 m/min Approximate footprint required: 12,700 x 9,400 x 6,200 mm Weight: 60 t Equipment: • Automatic milling head (0.001° indexing on both axes) • Spindle cooling system, 15 bar • Tool magazine for 60 tools • Chip conveyor • Renishaw RMP60 workpiece measuring probe • Base plate 7,000 x 1,500 x 350 mm • Rotary table 1,200 x 1,200 mm (5 t load capacity) Csdpoxu Uqwsfx Ah Ujri • Spare manual milling head

Condition: ready for operation (used), Year of construction: 1989, General Data Machine weight 25500–27000 kg Main Drive Spindle speed range 3000 Tool taper ISO 50 Number of axis 3 Crodexl Hyrspfx Ah Uei Table Number of tslots 7 This 3-axis Zayer KF 4000 was manufactured in 1989. It features a large table of 4,000 × 1,000 mm, capable of handling loads up to 10,000 kg. Equipped with a spindle speed of up to 3,000 rpm and a power range of 30–37 kW, it ensures robust machining capabilities. Consider the opportunity to buy this Zayer KF 4000 universal machining centre. Contact us for more information about this machine. Application Types Milling

Condition: used, The machines are in good condition. Codpfoxtflcjx Ah Usri

Condition: used, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,250 mm, X-AXIS STROKE 6000 MM Y-AXIS STROKE (VERTICAL) 2000 MM Cjdevu Ah Ispfx Ah Ueri Z-AXIS STROKE 1250 MM SPINDLE SPEED 35 - 4500 RPM SK 50 CONE ATTACHMENT AUTOMATIC INDEXING HEAD 1 ° X 1 ° WORK FEED 6 - 10000 MM/MIN RAPID FEED 20000 MM/MIN CNC HEIDENHAIN iTNC 530 40-Place Tool Changer COOLANT THROUGH THE SPINDLE 8 BAR AND OUTSIDE 2000 X 7000 MM Anchoring Table CHIP CONVEYOR

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, travel distance X-axis: 10,000 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 2,500 mm, Equipment: documentation/manual, Zayer mobile column milling machine, horizontal stroke 10000, vertical stroke 2500, slide stroke 1250, spindle 1800n, tool magazine 30 positions, year 1994, Heidenhain 415b control with 15" LCD display replaced last year, cone grinding October 2024 (iso50), always serviced. Currently in use. Cjdewhd Alspfx Ah Uori

Condition: used, Year of construction: 2000, x-travel 3.700 mm y-travel 3.050 mm z-travel 1.000 mm Codpfx Ahowg Hrgs Uori Control HEIDENHAIN TNC-430 PA distance between columns 2.300 mm 1.175 mm rapid travel x/y/z 25.000 mm/min feeds 15.000 mm/min tool taper ISO-50 - DIN 69871 table weight 20.000 Kg spindle drive 37 kW milling head -swivable +/- 45 ° milling head AB Achse 360.000 pos. Tools changer 30 fach/tools Chip coveyor Ink. Internal cooling system 20 bar table-size 4.000 x 1.800 mm weight of the machine ca. 42 t

Condition: good (used), Year of construction: 1995, functionality: fully functional, travel distance X-axis: 10,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 3,000 mm, - CNC control Heidenhain TNC 415B Cedpowrzkzefx Ah Usri - controlled 2-axes NC-milling head 2,5° - coolant device The machine will be sold without the plate field Accessories: ca. 20 pieces tool tapers DIN 2080 with bolts DIN 69872 some spare parts like bevel gears for the milling head and ball screw for X-axis. Technische Daten / technical details: Verfahrweg X längs / X-travel longitudinal 10000 mm Verfahrweg Y quer / Y-travel cross 1500 mm Verfahrweg Z vertikal / Z-travel vertical 3000 mm Werkzeugschaft / spindle taper SK50 Drehzahlbereich (2-stufig) / spindle speed (2-steps) 35-3000 UpM /rpm Vorschub / infeed 6-10000 mm/min Eilgang X,Y,Z / rapid feed X,Y,Z 10, 15, 10 m/min Antriebsleistung Hauptmotor 100%ED / drive capacity main motor 100%ED 37 kW Gewicht der Maschine ca. / weight 39300 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 6,612 mm, travel distance Y-axis: 5,645 mm, travel distance Z-axis: 1,250 mm, table length: 7,000 mm, table width: 2,500 mm, spindle speed (max.): 4,500 rpm, distance between stands: 3,800 mm, Technical Data • Table clamping surface: 7,000 × 2,500 mm • X-axis (longitudinal travel): 6,000 + 612 mm • Y-axis (cross travel): 4,670 + 975 mm • Z-axis (vertical travel): 1,250 mm • W-axis (vertical travel): 1,200 mm • Distance between uprights: 3,800 mm • Distance table surface – spindle nose: 2,015 mm • Drive power AC motor: 60 kW • Spindle speed, 2-step, digital spindle drive: 60 – 4,500 rpm • Feed rate in CNC operation (rapid traverse): up to 10,000 mm/min • X-axis: 20,000 mm/min • Y- and Z-axis each: 25,000 mm/min Credpfsxgr Epex Ah Usi • C-axis rotary table: ±180° • 45° milling head rotation: 360° Main components of the machine • Heidenhain path control iTNC 530 with 15" monitor • Tool changer with 60 positions • Rotary table for operation with multiple milling heads and automatic milling head change, consisting of collet system for holding various milling heads, quick couplings for hydraulic, coolant, and power supply, as well as the corresponding electrical safety switches • Centering of the milling heads on the rotary table using Hirth face toothing (on the mounting plate and respective milling head) • 2 x milling heads: straight-head adaptor (direct spindle), automatic 45° milling head • Crossbeam motorized traversable (for positioning only) • Operator platforms: 2 operator platforms with protective enclosure and integrated control panel, traveling along X-axis, each with 2 doors • Chip conveyor on both sides of the table plus a transverse conveyor • X-axis longitudinal and Y-axis cross drive by rack and pinion with 2 servomotors (play-free electronic pre-tensioning, master-slave principle) • Z-axis vertical adjustment by ballscrew (Ø 80) with preloaded double nut • Zayer guideway system made of inlaid or bolted, hardened steel strips • All axes equipped with INA roller recirculating shoes on each track surface • Counter-guides on all axes with additional polymer coating for optimal damping • Anchoring and leveling elements • The machine complies with the currently applicable EC directives The above information is taken from the machine documentation. The seller assumes no liability for completeness or accuracy. The decisive factors are the actual technical data and functions of the machine.

Condition: excellent (used), Year of construction: 2014, travel distance X-axis: 8,000 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,600 mm, Hersteller: ZAYER, Typ: 30 KCU 8000-AR Baujahr: 2014 Serien-Nr.: 77258 5-Achs Verfahrwege (X/Y/Z) ca. 8000/3500/1600 mm, Werkzeugaufnahme SK50 2 heads: -45° Automatic Head -Direct Head 80-fach Werkzeugwechsler Steuerpult HEIDENHAIN iTNC 530 Rotary Table DRL TS1800: 2000*2000/1000mm 40T Codpfxsw I N Ixe Ah Usri Späneförderband TECNIMETAL Kühlaggregat EURO COLD Aufspanntisch DEMMELER Kühlmittelanlage Sicherheitsabsperrung mit Lichtschranke LENZE

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,000 mm, table width: 1,000 mm, table length: 3,500 mm, ZAYER bed type milling machine in good working condition. Specifications: X-axis travel: 3200mm Y-axis travel: 1200mm Z-axis travel: 1000mm milling head taper: ISO 50 control: Heidenhain TNC410 Cedew Uha Hepfx Ah Uori table size: 3500x1000mm year of manufacture: 1999

Year of construction: 1992, condition: ready for operation (used), Travel X/Y/Z: 1700mm/800mm/800mm, table dimensions X/Y: 2000mm/630mm, tool holder: ISO50, max. table load: 6000kg, feed: 5m/min, rapid traverse: 15m/min. Machine dimensions X/Y/Z: approx. 5200mm/2800mm/2950mm, weight: approx. 12000kg, control: Heidenhain TNC-630, documentation available. On-site inspection is possible. Crjdownr Iispfx Ah Usi

Condition: used, Year of construction: 2001, x-travel 2708 mm y-travel 1250 mm z-travel 1513 mm table-size 3000 x 1000 mm taper ISO ISO 50 turning speeds 35-6000 U/min working speed 20000 mm/min rapid traverse 25000 mm/min table load 10 t Control HEIDENHAIN TNC-430 weight of the machine ca. 28 t Crsdpfjwrztcox Ah Uji

Condition: good (used), Universal milling head system "HURON" with hydraulic tool clamping Spindle receptacle SK / ISO 50 throat 550 mm drive power 30 kW Overall dimensions L x W x H approx. 840 x 430 x 500 mm Weight 420 kg Accessories / special features: - Pivotable over 2 levels "HURON" system Cedpehhndysfx Ah Usri - Drive tool holder with splined shaft - Hydraulic tool clamping - Tightening pin Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: ready for operation (used), controller manufacturer: Heidenhain TNC 407, empty load weight: 15,500 kg, total length: 7,357 mm, total width: 3,400 mm, total height: 3,107 mm, Type: LFU 3000 5-assig simultaan frezen Orthogonale CNC-indexeerfreeskop koeling door spindel 30-positie gereedschapswisselaar Keeldiepte: 1500 mm Longitudinal travel X-axe: 2700 mm Cross travel Y-axe: 1200 mm Crsdpfx Aev Tanveh Uoi Travel Z-axe: 1000 mm Dimensions clamping space- table: 3000 x 1000 mm Power on spindle: 26 kW Admission in millinghead (ISO): ISO 50 Max speedrange: 1800 rpm Power needed (KVA): 68 kVa Cooling system: yes

Condition: excellent (used), Year of construction: 2014, travel distance X-axis: 6,000 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,600 mm, Hersteller: ZAYER, Typ: 30 KCU 6000-AR Baujahr: 2013 Serien-Nr.: 77258 5-Achs Verfahrwege (X/Y/Z) ca. 6000/3500/1600 mm, Werkzeugaufnahme SK50 2 heads: -45° Automatic Head -Direct Head 80-fach Werkzeugwechsler Steuerpult HEIDENHAIN iTNC 530 Späneförderband TECNIMETAL Kühlaggregat EURO COLD Aufspanntisch DEMMELER Kühlmittelanlage Csdsw U E Unopfx Ah Uori Sicherheitsabsperrung mit Lichtschranke LENZE

Condition: used, Year of construction: 1995, W A N D E R E R Model H 200 V/TNC 360 C Table size 1250 x 720 mm – Travels: X 1000 mm, Y transverse 500 mm – Max. distance from table to spindle (vertical reach 700 mm – max. reach from column face to spindle center – transverse 760 mm). Machine with automatic folding head for automatic swiveling from horizontal to vertical or vice versa – also available. Automatic tool clamping with SK 50 – Work area cabin – Electronic handwheel – Heidenhain 360-C contouring control with color graphics and electronic handwheel – Machine with approximately 30 cutter holders – Swiveling control panel, etc. 1 used, excellently preserved bed-type milling machine of very sturdy construction: The machine was overhauled in 1995 for *150,000.00 DM – the overhaul work included the complete restoration of the geometry to new machine accuracy and the conversion to TNC 360 contouring control. 8 mm infeed with cutter head is no problem! Numerous SK 50 holders – machine mounts, etc. Hand-scraped guideways in top quality. Crodpeb I Iqcjfx Ah Usi

Year of construction: 1995, condition: ready for operation (used), A CNC traveling column bed milling machine (lateral milling machine) Zayer is available. Travel X/Y/Z: 10000mm/1500mm/3000mm, rapid traverse X/Y/Z: 10m/15m/10m/min, spindle power: 37kW, tool holder: SK50/DIN2080, feed and spindle motors: Indramat, power consumption: 64.1kVA. Machine dimensions X/Y: approx. 18m/6.5m, weight: approx. 40t, control: Heidenhain TNC 415B, operating hours: approx. 61975h, spindle hours: approx. 41500h. Expected to be available from August 2025. Documentation available. On-site inspection is possible. Crsdpfx Aewpk Ahoh Uji

Condition: used, Year of construction: 1992, x-travel 1700 mm y-travel 800 mm Codpjtqqxfsfx Ah Usri z-travel 890 mm table surface area 2000 x 630 mm spindle taper SK 50 spindle turning speed range 35 - 3000 U/min spindle drive 26 kW feeds longditudinal/cross/vertical 6 - 5000 mm/min rapid traverse 15 m/min table load max. 6000 kg control HEIDENHAIN control TNC 360 total power requirement 45 kVA weight of the machine ca. 13 t dimensions of machine L x W x H 5,2 x 2,78 x 2,95 m Accessories: vertical head swivelling in 2 planes with hydr. tool clamping, various tool fixtures, coolant

Condition: reconditioned (used), functionality: fully functional, travel distance X-axis: 1,320 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, spindle speed (max.): 1,800 rpm, controller model: Fagor 8055, TECHNICAL DETAILS Table size: 1,700 x 510 mm Max. table load: 3,000 kg Travel paths X-axis travel: 1,320 mm Y-axis travel: 610 mm Z-axis travel: 610 mm Spindle Spindle speed range: max. 1,800 rpm Tool holder: ISO-50 Control system CNC control: Fagor 8055 Electronic handwheel: Fagor Cedjwfghrspfx Ah Uori MACHINE DETAILS Machine weight: 8,500 kg

Condition: used, Year of construction: 1997, travel distance X-axis: 3,708 mm, travel distance Y-axis: 1,208 mm, travel distance Z-axis: 1,002 mm, feed length X-axis: 5,000 mm, feed length Y-axis: 5,000 mm, feed length Z-axis: 5,000 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, spindle speed (max.): 3,000 rpm, spindle speed (min.): 35 rpm, CNC Bed-Type Milling Machine – Universal ZAYER 20 KF 4000 Year of manufacture: 1997 CNC control: HEIDENHAIN TNC 426/430 Technical specifications: X travel: 3708 mm Y travel: 1208 mm Codewtpfpepfx Ah Usri Z travel: 1002 mm Table size: 4000 x 1000 mm Tool holder: SK 50 Spindle speeds: 35–3000 rpm Spindle motor: 22 kW Feed range: 6–5000 mm/min Rapid traverse: 15 m/min Machine weight: approx. 19.5 t ADDITIONAL INFORMATION Electronic handwheel Automatically swivelling milling head vertical/horizontal +/-120° (stepless) Milling head automatically swivelling in the rear axis / 90° rotation Coolant system The machine can be inspected under power. Delivery time: immediately Sale from location Westerkappeln Dismantling, loading available on request.

Condition: used, Year of construction: 2004, operating hours: 17,000 h, functionality: fully functional, machine/vehicle number: 77203, travel distance X-axis: 7,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,250 mm, rapid traverse X-axis: 20,000 m/min, rapid traverse Y-axis: 20,000 m/min, rapid traverse Z-axis: 10,000 m/min, feed rate X-axis: 20,000 m/min, feed rate Y-axis: 20,000 m/min, feed rate Z-axis: 10,000 m/min, spindle speed (max.): 4,500 rpm, table length: 7,000 mm, table width: 1,500 mm, coolant supply: 15 bar, spindle motor power: 37 W, Equipment: documentation/manual, Accessories Automatic Milling Head (0.001 degrees in both planes) Cooling Through the spindle 60 ATC Chipconveyor Renishaw RMP60 part measuring Floorplates 7000 x 1500 mm Rotary Table 1200 x 1200 mm (5t) Extra manual Milling Head Csdpfx Aowu R R Nsh Usri

Condition: ready for operation (used), Year of construction: 1997, General Data Machine weight 25000 kg Crsdpfx Ahov S Naro Uei Control Unit Brand FANUC Model 31i-B Main Drive Spindle speed range 3000 Spindle motor power 37 kW Tool taper DIN 2080 Number of axis 3 Movement X-Axis Movement 2708 mm X-Axis Working Feed 15000 mm/min Y-Axis Movement 1513 mm Y-Axis Working Feed 15000 mm/min Z-Axis Movement 1259 mm Z-Axis Working Feed 15000 mm/min This 3-axis Zayer 30KF 3000 vertical machining center was manufactured in 1997. It offers robust construction and precision for complex machining tasks. Ideal for those seeking reliable performance in a used machine. Contact us for more information. Application Types Milling

Condition: excellent (used), Fixed bed milling machine Zayer model KF 3000 with CNC heindenhain 355, prepared with external computer for cad cam, table 3000mm x 1000mm, travels, longitudinal 2700mm, transverse 1250, vertical 1000mm, rapid advances 15000mm/min, huron iso 50, spindle speed 3 ranges 3000 rpm variable, recently repaired huron head, with change of gear pair and all the bearings of the same head.power 30kw, weight admitted on table 10000kg, machine in good condition, weight of the machine 25tns. Credpfx Aovdv Tceh Uei