Used Zftk 250 for sale (10,073)

Condition: new, Brinkmann STC 250 / 720 MVXZ + 459 submersible pump 250 L / min No. 001, serial number as per photo, unused, 100% functional, scope of delivery as per photo ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Gusdpfx Aei D Hkbokyoc

Condition: ready for operation (used), Heidenhain LS 487 linear scale ML 120 mm Id. 572 250-02 SN:76626101N + AE LS 487 scanning head Id. 1199654-02 SN:76314222F, used, in good condition, 100% functional, scope of delivery as per photos. Gedox Er E Nepfx Akyjuc

Condition: ready for operation (used), GMN TSE 75cdu x 250/15000 high-speed spindle, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Godpfsi Eabgox Akyouc

Condition: ready for operation (used), Festo EGSL-BS-55-250-12.7P mini slide 559339 J108 serial number: 08373, used, in good condition, 100% functional, delivery as per photos. Gedpsx Erm Tjfx Akyouc

Condition: new, Effgen 4BT9-250-3-12-W5/W10-K505NE-B126-C100 CBN disc 503122.01, serial number as per photo, unused in original packaging, 100% functional, scope of delivery as per photos Godpfoi D Uq Nsx Akyeuc

Condition: ready for operation (used), Litronic PR 250-60/1A/Lit1102/PB/V4 pulse controller , serial no. according to photo , used, good condition, 100% functional, scope of delivery according to photos Gujdpfx Akei Eby Ioyec

Condition: ready for operation (used), Heidenhain ROD 250 18000 . 21311601 Serial number: 3654376C / L3, fully refurbished with 6 months warranty, 100% functional, delivery as per photos. Guodpfx Ajy Nqn Dekyjc

Condition: ready for operation (used), Heidenhain ROD 250 6000 . 213 116 54 S.Nr. 3 968 067 D, cable length 1 meter, used, with minor signs of wear, 100% functional. Delivery scope as per photos. Gsdpfox Er Rxox Akyjuc

Condition: ready for operation (used), Heidenhain ROD 250-18000 rotary encoder ID: 213 116 45 SN: 4556768E – cable length: 1m, used, in good condition, fully functional, delivery scope as per photos Gjdpjx Er R Esfx Akyjuc

Condition: ready for operation (used), H & B / S & F AVL 220 Electrical transmitter, measuring range 0-250 mbar, serial no. according to photo, used, normal traces of use, 100% functional, scope of delivery according to photos Gusdpfx Aei Eac Nekyjc

Condition: new, Heidenhain LS 487 : 572 250-59 linear scale ML 270, serial number: 43630711K with Heidenhain AE LS 487 : 594875-02 reading head SN: 43587982 D / 5.0ML/2.. B 09A 4ZS14~1Vss 2F01.., unused in opened original packaging, 100% fully functional, delivery scope as per photos. Gujdpfx Aox Er Hajkyjc

Condition: ready for operation (used), Indramat RAC 2.2-250-380-A00-W1 main spindle drive SN:232713-05451, used, normal signs of wear, 100% functional, delivery as shown in the photos. ATTENTION: Please enquire separately for packing and shipping costs! Guodpfox Dw H Hjx Akyec

Condition: new, Bühler FC-T G 1/2-75-DC-01/250 fluid control terminal with integrated level and temperature monitoring, unused, 100% functional, scope of delivery as per photos Gujdpfxji D Ulys Akysc

Condition: ready for operation (used), Heldt & Rossi Series SM 804/805 DC DC servo amplifier type 250-30, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Gjdpfx Akei Ea D Tjysuc

Condition: ready for operation (used), Festo EGSL-BS-55-250-5P / 562229 linear actuator, serial number: 12081, used, in good condition, 100% functional, delivery as per photos. Gusdpfex Erndjx Akyjc

Condition: ready for operation (used), Heidenhain TE 400 control panel ID: 250 517 SN: 4648841, used, in good condition, 100% functional, delivery as shown in the photos. Gusdey Nqtyepfx Akysc

Condition: used, Year of construction: 1999, total width: 900 mm, total length: 1,260 mm, total height: 1,450 mm, Empty weight: 389 kg - Year: 1999 - Documentation available: No - CE certificate present: No - Serial number: 1615 Gedpfsxan Iasx Akyouc - Main motor power [kW]: 11 - Flow capacity [m³/h]: 5450 - Negative pressure [Pa]: 3800 - Rotation speed [rpm]: 1450 - Connection diameter [mm]: 250 - Output diameter [mm]: 250 - Transport dimensions: 1260mm x 900mm x 1450mm (l x w x h) - Transport weight [kg]: 389kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 161 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 580 mm, number of axes: 7, This 7-axis Nakamura Tome WY-250 was manufactured in 2007. It features a twin spindle configuration with Y-axis capabilities on both turrets, allowing for versatile machining. The machine includes a maximum Z-axis travel of 580 mm and Y-axis travel of mm. If you are looking to get high-quality turning capabilities, consider the Nakamura Tome WY-250 horizontal turning machine we have for sale. Contact us for further details. • Travels: • X1: 160.5 mm • X2: 165 mm • Z1/Z2: 580 mm • Y1: mm • Y2: / mm • Included tooling: • 4x external tool holders • 4x tool holders for simultaneous mounting of 2 opposite tools • 6x boring bar holders • Driven toolholders (HEIMATEC): • 4x radial • 4x axial • Collet holders (Bellegrandi): • Main spindle: MSCNT70-A6” for BA & BD collets size 70, complete with related cups • Counter spindle: MSCTNR70-A5” for BA collets size 70, complete with spring ejector Additional equipment • IEMCA Master 880/33/P bar feeder (2003), S/N: 0200347S03 • Application: Automatic bar feeder for CNC lathes • Capacity: • Max bar length: 3300 mm (to be confirmed) • Max bar diameter: up to Ø80 mm (model family reference) • Guide channels: Ø65 mm included; Ø70 mm currently installed and can be supplied with the machine • Features: Automatic loading/feeding, synchronization with lathe cycle, compatible with spindle liner/guide channel systems, heavy-duty frame • Note: Sold together with the Nakamura Tome WY-250; some accessories/guide channels may belong to the lathe setup • Complete set of hand jaws (“Manine”) for parts unloader (parts unloader itself not specified) Machine Condition / Technical Status- IMPORTANT The machine is currently being sold in its present technical condition and the seller will NOT carry out the repairs before sale. Main known issues / condition points: • Lower turret driven tooling function not working correctly • Air/oil lubrication system issues detected Gsdpsy N Spcsfx Akyeuc • Presence of rust inside the lower turret gearbox • Upper turret gearbox found filled with NBU15 grease although the system should operate with air/oil lubrication • Z1 axis linear guides/slides require replacement • Z2 axis linear guides/slides require replacement • Geometry deviations detected during machine inspection • Various spindle/brake/hydraulic cylinder run-out deviations measured • Several bearings, ball screws, seals, guide rollers, belts, lubrication components and wipers require replacement according to the attached spare parts listInspection highlights: • Machine geometry and spindle parallelism were measured and documented • Run-out values were detected on both spindles and hydraulic chuck systems • Multiple axis lubrication and protection components require maintenance/replacement • Detailed spare parts list availableIncluded documentation: • Technical inspection report • Geometry verification report • Spare parts/replacement list • Photos of damaged/worn componentsThe machine remains a highly equipped Nakamura Tome WY-250 Super Mill platform, but prospective buyers should consider the required repair and maintenance work when evaluating the machine. Technical inspection and spare parts documentation available upon request. Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: used, Year of construction: 2011, IVECOPACK packaging machine, type 250 ST. Condition: see images. Guodpfezczntjx Akyec

Condition: ready for operation (used), Year of construction: 2017, operating hours: 44,678 h, clamping force: 2,500 kN, This Krauss Maffei 250 - 1000 CX hydraulic injection moulding machine was manufactured in 2017. It features a clamping force of 2500 kN and a maximum mold weight of 3430 kg. The machine includes a linear robot LRX 150 for enhanced automation. Consider the opportunity to buy this Krauss Maffei 250 - 1000 CX hydraulic injection moulding machine. Contact us for further details. • Tie bar spacing (H x V): 630 x 630 mm • Platen dimensions: 995 x 1050 mm • Mold installation height (min): 330 mm • Platen distance: 1150 mm • Max mold weight: 3430 kg total (fixed: 1715 kg / moving: 2286 kg) • Core pull control: 4 units (2 x fixed platen/FAP; 2 x moving platen/BAP) • Shut-off nozzle: 4-fold hydraulic cascade • Injection unit 1 (code 1000): • Screw diameter: 55 mm • Injection pressure: 1904 bar • Stroke volume: 523 ccm • Shot weight (PS): 476 g • Injection flow (PS): 404 g/s • Armored unit: Yes (ZE 33.00) • Printer interface: Yes • Condition: Well-maintained and serviced Additional equipment Gusdpfx Aeyhbq Eskyec • Automation: Linear robot LRX 150 with B/C axis combination (KM Linear Robot LRX 150 included) • Hot runner control: 12-fold • Cooling: 4 x HB 100

Condition: used, Technical details: floor-plate length: 4000 mm plate width: 1500 mm plate height: 250 mm weight of the machine ca.: 4,6 t space requirements of the machine approx.: 4,0 x 1,5 x 0,25 m Gujdpozcwr Isfx Akyjc *

Condition: excellent (used), Year of construction: 2012, WALTER WD 250/350 30 and 37 kW shaft multisaw – Polish production – year of manufacture 2012 – DTR and CE TECHNICAL PARAMETERS: cutting height 170 mm cutting width 350 mm spindle diameter 2 x 70 mm diameter of circular saw blades 300 mm spindle motor 30 kW and 37 kW feed motor 1.5 kW seven lower pulling rollers two upper toothed pulling shafts length of the feeding table 3000 mm spigot diameter belt collecting waste from under the machine 2 x 200 mm Gedpfsmv Elpox Akysuc dimensions (length / width / height) 320 / 200 / 200 cm weight 2000 kg

Condition: good (used), Year of construction: 1993, Hacksaw, hacksaw machine, metal hacksaw machine Gedpfx Akszbh N Usysuc -Manufacturer: Kasto, hydraulic mobile bow saw, with coolant system and stop -Type: HBS 250/280 -Motor: 0.65/1.0 kW -Cutting speed: 2-stage / 16-32 m/min -Cutting width: 280 x 180 mm -Cutting range at 45 degrees: approximately 180 mm -Cutting area at 45 degrees: square 170 x 200 mm -Saw blade: Length 450 mm - Clamping stock: swivels 45° Machine dimensions: 1300/1100/H1090 mm -Transport dimensions: 1300/600/H1090 mm -Weight: 200 kg

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Equipment: documentation/manual, We inform, that we currently only sell or deliver to the D-A-CH and Be-Ne-Lux countries. Gujdeuriwgopfx Akysc We ask for your understanding

Condition: excellent (used), Year of construction: 2019, Krauss Maffei KM 250-2000 CX Blue Power with Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2019 Injection Unit: Screw diameter: 70 mm Shot weight: 980 g Guodpfozc Nw Ajx Akyjc Injection pressure: 1877 bar Metering volume: 1077 cm³ Clamping Unit: Clamping force: 250 t Tie bar spacing: 630x630 mm Platen dimensions: 995x1050 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC6 – touchscreen Additional Equipment: Very good technical condition Operating hours: approx. h in automatic mode Euromap 67 Robot interface Air valve with vacuum measurement x 1 Air valve x 1 Hydraulic core pull x 3 Pneumatic core pull x 1 Hot runner control x 16 Hardened injection unit – bimetallic Energy-efficient machine – equipped with a system of 3 variable displacement hydraulic pumps Parallel movements Proportional valve on injection unit – precise injection Additional oil filtration pump Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2015 5-axis robot: 4 axes driven by servomotors (electric): X, Y, Z, B; C axis Touch screen control panel Robot safety package Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor belt available at an extra charge Dimensions: Weight: 20,100 kg Length/Width/Height: 6.50x2.20x2.30 m All machines offered are started up by our service technicians before sale. A video of the technical tests of the selected machine can be provided or it is possible to participate in live technical tests at our facility in Łódź. Price: On request