Double-column hydraulic press with drawing cushion, hydraulic drawing press, double-column press, do
NEFF RHS 125 Z

Name: NEFF RHS 125 Z
Brand: NEFF
Price: 19000 EUR
Availability: InStock

Fixed price plus VAT

€19,000

Condition

Used

Location

Hessisch Lichtenau Germany

Double-column hydraulic press with drawing cushion, hydraulic drawing press, double-column press, do NEFF RHS 125 Z

Machine data

Machine type:: Double-column hydraulic press with drawing cushion, hydraulic drawing press, double-column press, do

Manufacturer:: NEFF

Model:: RHS 125 Z

Condition:: used

Price & Location

Fixed price plus VAT

€19,000

Location:: 37235 Hessisch Lichtenau

Call

Details about the offer

Listing ID:: A5785065

Reference number:: 58083

Update:: 20.02.2026

Description

Double-column hydraulic press, NEFF type RHS 125 Z
Hydraulic drawing press
Machine no. 3973, year of manufacture 1983
Pressing force 125 tons
Column width 1050 mm
Column opening, side 550 mm
Table area 1000 x 800 mm
Ram area 1000 x 800 mm
Ram stroke 350 mm
Installation height max. 750 mm
Table height above floor 960 mm
Drawing cushion force approx. 12 tons at 105 bar
Drawing cushion stroke 100 mm
Through-hole in the table Ø 202 mm
Rapid traverse speed, downward approx. 360 mm/sec
Rapid traverse speed, upward approx. 360 mm/sec
Hodpfx Asguvtloqrop
Working speed approx. 36 mm/sec
Oil tank capacity approx. 1000 liters
Motor power, main pump 22 kW
Motor power, control pump 4 kW
Motor power, control pump 2.2 kW
Power connection 400 volts, 50 Hz
- Hydraulic drawing cushion under the table with a hole through the table plate Ø 202 mm
- Precise 4-way column guidance on the ram corners
- Stepless pressing force adjustment
- Adjustable fixed stop, electrically controlled via a hydraulic motor
- Stroke damping
- 2-hand control panel for releasing the lifting motion on the press
- Control cabinet positioned next to the press (1600 x 500 mm)
- Documentation including operating manual, electrical wiring diagram, and PLC program printout available
Space required for the press L x W x H 2600 x 2400 x 4270 mm
Weight approx. 14 tons
Good condition

The listing was translated automatically. Translation errors are possible.

Seller

Registered since: 2013

589 listings online

Call

Send inquiry

Telephone & Fax

+49 5602 ... show

Fax:

These listings may also fit your interest.

Listing

Double post hydraulic press EMANUEL DEA 400/2000

Ciriè

8,084 km

Double post hydraulic press
EMANUELDEA 400/2000

Call

Year of construction: 1993, condition: used, TYPE: DEA 400/2000 Hjdpfxsihf R Uj Aqrjp Year: n.d. MAXIMUM RAM CAPACITY: 400 tons SLIDE STROKE: 1,100 mm MAXIMUM SHUT HEIGHT: 1,600 mm TABLE DIMENSIONS: 2,000 x 1,600 mm FAST STROKE: 650 mm/sec CUSHION CAPACITY: 160 tons CUSHION STROKE: 400 mm HEIGHT ABOVE GROUND: 5,800 mm DISTANCE BETWEEN UPRIGHTS: 3,400 mm LATERAL WINDOW: 1,600 mm

See details

Listing

Concrete Pipe Machine ZİM Mühendislik ZIM T SERIES

Saray

9,961 km

Concrete Pipe Machine
ZİM MühendislikZIM T SERIES

Call

Year of construction: 2022, condition: new, ZIM T1200 machine can produce pipes 300mm – 1200mm diameter and 500mm – 2500mm height by single, double and triple pressing. 150mm and 200mm pipes also can be produced for special demands. Machines can be designed semi or full automatic according to requirements. We use SIEMENS brand PLC microprocessors on automatic machines. There exists motrar bunker and motrar filling systems on machines. Hsdpjibbiksfx Aqrop Produced materials can be carried to drying area with carriage carts or forklifts. Production is done on production pallets, Materials up to 800mm diameter are carried to drying area with carriage carts, pipes bigger than 800 mm diameter can be carried with forklift. For fast production, pipes bigger than 300mm diameter also can carried to drying area with forklift. Machine makes production by hydraulic press and vibration. Vibration system of the machine is special design of ZIM Engineers. Vibration system which have oil cooling system and special oil unit. This system can be controlled electronically. Special designed strong chassi of the machine enables long live producing without errors.

See details

Listing

Recirculating oven 300°C electric Ingenieurbüro Klein mit Umluft, Nanodac UK 8820-300

Meiningen

7,909 km

Recirculating oven 300°C electric
Ingenieurbüro Klein mit Umluft, NanodacUK 8820-300

Call

Condition: new, Year of construction: 2026, Recirculating chamber furnace, electric, brand new, delivery time 16 weeks - Maximum temperature: 300°C - Internal dimensions (W x D x H): 2100 x 2100 x 2000 mm - Capacity: 8,820 liters - Eurotherm Nanodac controller/recorder with color touch display Hodpfx Aov Hg Eusqrop - 2 circulating air fans - Double door with safety door sensors - Over-temperature protection, Eurotherm 3216i - 2 fresh air fans - Automatic dampers - Electrical configuration: 400 V / 50 Hz / 3NPE - Increased heating capacity of approx. 70 kW - Temperature accuracy: +/- 6 K in the empty oven - Documentation and CE declaration of conformity - Electrical schematic with spare parts list Note: The oven floor is not insulated but is covered with stainless steel sheet. This allows unrestricted access with all track widths. Alternatively, an insulated floor can be offered (with entry rails to be defined by the customer). We offer new and used industrial furnaces, which we can also modify and upgrade according to customer requirements. Keywords: oven, ovens, drying oven, industrial furnace, drying cabinet, heating oven, heat cabinet, recirculating oven, chamber oven, heating chamber, chamber recirculating oven, tempering oven, annealing oven.

See details

Listing

Schmölln

7,995 km

Coiler
GSWLHM 80/650

Call

Listing

Laser Cutting Machines - Fiber laser cutting BLM GROUP ADIGE LT14 XL

Matelica (MC)

8,557 km

Laser Cutting Machines - Fiber laser cutting
BLM GROUPADIGE LT14 XL

Call

Year of construction: 2017, condition: ready for operation (used), - USED - FIBER LASER CUTTING MACHINE FOR TUBES WITH LOADING/UNLOADING SYSTEM MIN CIRCULAR SECTION: ø 25 mm MAX CIRCULAR SECTION: ø 355 mm MAX SQUARE SECTION: 260 X 260 mm MAX RECTANGULAR SECTION: 300 X 200 mm MAX ADMITTED LOAD: 100 Kg/m SOURCE: IPG YLS-4000 ; 4000 W Hsdpsx E Eihsfx Aqrep CONTROL UNIT: SIEMENS 840D WEIGHT: 12500 Kg NOTE: AUTOMATIC LOADING 3-12.5 mt; AUTOMATIC UNLOADING 12.5 mt; 3D CUTTING HEAD; CAPACITIVE SENSOR; AUTOMATIC ADJUSTMENT

See details

Listing

Steißlingen

8,000 km

Welding robot
KUKAKR C4 compact

Call

Condition: like new (used), Year of construction: 2017, operating hours: 300 h, functionality: fully functional, machine/vehicle number: 356801, arm reach: 706 mm, We only used the TIG welding robot for 2 months. The machine is in perfect condition. The extraction system was never in operation. The machine enclosure and welding table are included. The “Ready2_pilot” programming and material feed for welding can be retrofitted at any time. Hsdpfx Aqoxw R Nnerjp

See details

Listing

Hydraulic press Hans Schoen NHN 250 75 (250 Ton)

Struer

7,436 km

Hydraulic press
Hans SchoenNHN 250 75 (250 Ton)

€22,000

EXW Fixed price plus VAT

Call

Condition: ready for operation (used), Year of construction: 1998, power: 37 kW (50.31 HP), pressing force: 250 t, stroke length: 150 mm, table width: 900 mm, table length: 1,000 mm, overall weight: 16,000 kg, Very nice and well maintained hydraulic press. Hodpfx Aery Trpeqrop 250 tons pressing force. Approximate dimensions: H: 380 cm. W: 200 cm. L: 200 cm. Weight: 16,000 kg. Can be loaded by crane on collection against payment. Transportation can be arranged. Sold for customers. Location: DK-7600 Struer. Make an appointment for a demonstration.

See details

Listing

CNC Laser Cutting Machine Trumpf TruLaser 3030

Germany

7,870 km

CNC Laser Cutting Machine
TrumpfTruLaser 3030

Call

Year of construction: 2011, condition: ready for operation (used), Travel X/Y/Z: 3000mm/1500mm/115mm, max. material thickness mild steel/stainless steel/aluminum: 25mm/20mm/12mm, axis speed: 140m/min, laser type: TruFlow 5000, laser power: 5000W (5kW), machine dimensions X/Y/Z: approx. 9300mm/4600mm/2200mm, weight: approx. 12000kg, operating hours (as of February): approx. 75000h, laser hours (as of February): approx. 42000h. Documentation available. On-site inspection is possible. Hodswzbbrjpfx Aqrop

See details

Listing

ISBM Line = Injection Stretch Blow Moulding, stretch blow moulding machine for single-use PET bottle ETEK / GF-Industries Supra 800 sv 1

Hessisch Lichtenau

7,826 km

ISBM Line = Injection Stretch Blow Moulding, stretch blow moulding machine for single-use PET bottle
ETEK / GF-IndustriesSupra 800 sv 1

€65,000

Fixed price plus VAT

Call

Condition: used, Stretch blow molding machine by Etek ISBM line = Injection stretch blow molding Stretch blow molding machine for single-use PET bottles made from PET preforms Stretch blow molding machine for production using the rotary process Hedpekucxljfx Aqrsp Manufacturer: ETEK / GF-Industries, Type Supra 800 sv 1 Serial number: 22000225 Year of manufacture: 2012 Power: 90 kW Mains connection: 400 volts, 50 Hz Weight: approximately 6000 kg In like-new condition

See details

Listing