Mitre saw

Omga

Condition: used, Year of construction: 2023, DOUBLE GLASS BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLASS BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double miter saw for the simultaneous cutting of two glass beads positioned one above the other. The right saw unit is fixed, adjustment of the left unit is via the set cutting length can be read off a digital display. The units have supports that allow two glass beads to be cut simultaneously. The upper support can be removed for cutting larger cross-sections. After the cutting process is completed, the pneumatic clamping cylinders automatically swing to the side to simplify loading and unloading of the machine. STANDARD EQUIPMENT • Fixed unit on the right • Digital dimension display • Pressure switch • 2 HM-tipped saw blades • Electrical system with motor brake, undervoltage release, motor protection switch • Pressure switch • Tool set • Guards with horizontal clamping devices, pivoting • Two-hand control • Belt drive • Pneumatic unit lift • Middle support TECHNICAL DATA • Motor power 2 x 1.2 kW • Saw blade diameter Ø 220 mm • Max. cutting height without support 80 mm • Max. cutting width at 90 degrees 55 mm • Max. cutting width at 45 degrees 40 mm • Max. cutting length 2800 mm (optional 4000 mm) • Min. cutting length 158 mm • Weight 217 kg • Space requirement (standard equipment) 3000 x 850 mm Extended cutting capacity 1 pc Maximum cutting length • 4000 mm Star stop 4 positions 1 pc set 2 mechanical stops for adjusting up to 4 intermediate angles. Additional center support. 1 adjustment for rebated profiles. 1 adjustment for rebated profiles as per drawing: - Attachment to the clamping devices to compensate for the profile inclination - Allowances on the rear stops of the units and the center support. The sketch below shows (in green) a beveled presser that follows the inclined profile and presses it against the allowance on the stop (shown in red). Storage location: Garbsen Lhsdpfoxnlgcex Ab Tsc

Condition: excellent (used), UNLOADER (SINGLE-CAGE) Lodpfx Abscggy So Tjhc - Vacuum system with its pump - Top holding bar deplacement (pivoting) of 180° - Horizontal-longitudinal bars (rocker arms) for the vacuum cups supporting - In-side lifting table, surface with motorized-rollers - Front-side sliding door (or metal grid) to out-feed the stack of the panels - Separated electric and command panel - Out-side rollers way (on ground) to out-feed pile of panels from the Unloader - Out-side motorized rollers table (which brings panels to the Unloader), with also cross motorized conveyor belts (at 90°) - Working capacity (cycles/min): 12-15 - Min/Max panels thickness mm 10 - 40 - Min dimensions of the panels mm 250 x 320 (estimated) - Max dimensions of the panels mm 1200 x 3000 - Total installed motor power KW 10

Condition: excellent (used), CATALOGUE NUMBER 7065 TECHNICAL DATA - Max. saw blade diameter: 300 mm - Spindle diameter: 30 mm - Blade guards: 2 pieces Lodex Sq E Ispfx Ab Tehc - Pneumatic cutting (up/down blade movement) - Saw units adjustable at 45° - Manual spacing adjustment of the saw units - Min. cutting length at 90°: 220 mm - Max. cutting length at 90°: 2820 mm - Cutting width: 110 mm - Cutting height at 90 degrees: 90 mm - Pneumatic clamps: 2 pieces - Foot switch - Material support - Main motor: 2×1.6 kW - Dimensions (L/W/H): 3620x1100x1250 mm - Weight approx. 500 kg – Unpainted – Tilting saw units – Used saw, in very good condition Net price: 13,900 PLN Net price: 3,300 EUR depending on the exchange rate 4.2 EUR (Prices may change with higher fluctuations)

Condition: used, Präzision Kapp- und Gehrungssäge  / Precision Miter Saw OMGA T55 300 Baujahr / Year ca. 2009 mit Absaugung / with suction Sägeblattdurchmesser / Saw blade Diameter 300mm Ledpfxexvh E Rj Ab Tohc Schnittbreite / Cutting width max. 90° 135 mm Schnittbreite / Cutting width max. auf 45° 90 mm Schnitthöhe / Cutting high  max. 98 mm Festpunkte bei / Fixed Points on a 45°- 30° - 22°30' - 15° - 10° rechts und links Sehr guter Zustand / Very good condition Verstellbare Präzisionskapp- und Gehrungssäge mit Drehtisch, selbstzentrierender Blockierung in den Hauptwinkeln 45°, 30°, 22°30’, 15°, 10° und 0° rechts und links, manueller Blockierung der Zwischenwinkel, Winkelablesung von Gradskala. Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: ready for operation (used), Year of construction: 1974, machine/vehicle number: 74-4-10, functionality: fully functional, ALTENDORF F90 sliding table saw, year of manufacture 1974 Machine no.: 74-4-10 Manufacturer Altendorf Germany Saw length mm: 2600 cutting width mm: 1.300mm Ljdpfxjipvrbo Ab Tehc Cutting height max mm: 130 Saw blade diameter max. 400 mm Main motor 5.5 KW with scorer 4 speed levels Saw blade height adjustment: manual Weight approx. kg: 780 Technical data subject to change

Condition: ready for operation (used), functionality: fully functional, type of input current: three-phase, cutting height (max.): 80 mm, total length: 7,470 mm, total width: 1,100 mm, total height: 1,500 mm, overall weight: 450 kg, cutting length (max.): 2,500 mm, main saw diameter: 340 mm, OMGA T720 crosscut saw Specification: - condition - used - manufacturer - OMGA - model - T720 - working width - 250 mm - working height - 80 mm Lhedpfxer Ik I Ae Ab Toc - motor power - 2.2 kW - right table length - 400 cm ( 2 x 200 cm ) - left table length - 315 cm - tables with a width of 29 cm - pneumatic ratchets for cutting to the set length - 3 pcs. - adjustable cutting speed - max blade diameter - 340 mm - spindle - fi 40 mm - suction nozzle - fi 100 mm - weight - about 450 kg - overall dimensions - 742 x 110 x 150 cm (L x W x H) - body dimensions - 100 x 110 x 150 cm (L x W x H) Additional information: - very good, factory technical and visual condition - presented photos illustrate the actual state of the object of sale - possibility to turn on and check the device on site - the price given in the auction does not include VAT

Condition: used, Technical data: Max. saw blade diameter: 400 mm Min. saw blade diameter: 300 mm Saw spindle diameter: 30 mm Guide rail length: 1100 mm Miter cutting range: from –80° to +80° Bevel cutting range: from 0° to 90° Work table dimensions: 835x1175 mm Saw blade guard Power supply: 400 V Lhsdpfeyhnkfex Ab Tec Motor power: 3 kW Overall dimensions: Length: 1400 mm Width: 1175 mm Height: 1600 mm

Condition: as good as new (ex-display), FULL LINE of Double-side Sizing-Milling & Edge Banding. Composed of the following machines: Lhedpfsdt Rgvjx Ab Tjc VZ0200A) Gantry-portal Loader (Double pick-up station) "BARGSTEDT" Mod. TBH 500/D/30/12 VZ0200B) 1st Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 525/8/A3/15 VZ0200C) In-feeding Rollerway "HOMAG" Mod. TDL 310/30/12 with 90° Turning device (from lenghtwise to crosswise) with double cone system VZ0200D) 2nd Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 526/10/A3/30 VZ0200E) In-feeding Rollerway "HOMAG" Mod. TDL 510/25/12 with 90° Turning device (from crosswise to lenghtwise) with double cone system VZ0200F) Cleaning machine "WANDRES" VZ0200G) Gantry-portal Stacker (Double pick-up station) "BARGSTEDT" Mod. TSP 410/D/25/12

Condition: used, Technical data: Saw diameter: 500 mm Saw spindle diameter: 30 mm Saw feed manual Max cutting height: 150 mm Max cutting width: 500 mm Table width: 580 mm Table with 6 rollers in the table Diameter of rollers: 60 mm Extraction spigot diameter: 100 mm Power supply: 400 V Motor power: 4 kW Lhsdpori Skwefx Ab Toc Overall dimensions: Length: 4000 mm Width: 1180 mm Height: 1700 mm

Condition: used, Crosscut Saw, Mitre Saw OMGA T50.350 2.2 kW - after technical inspection, ready for operation Specification: • Technical condition – used, after inspection • Manufacturer – OMGA • Model – T50.350 • Blade diameter – 350 mm (bore 30 mm) • Saw motor – 2.2 kW • Max. dimensions of cut element at 90°: 100 x 165 mm (H x W) • Safety covers on the saw for operator protection • Extraction outlet – ø80 mm • Cutting angle adjustment: +/- 45 degrees • Overall dimensions without extension tables: 75 x 62 x 80 cm (L x W x H) Additional information: • The machine is in good technical condition, ready for immediate use • The attached photos show the actual condition of the item for sale Lhsdpsyg R Nujfx Ab Tec • On-site inspection and operation check possible • The price listed in the auction does not include VAT or transport costs Financing and transport: • We organise transport by MDD fleet, courier companies, or external carriers • We offer financing support in the form of leasing or lease loans

Condition: used, • Load capacity 350 kg • 6 vacuum suction cups, 250 mm diameter, adjustable • Vacuum lifter can rotate 90° and tilt 90° • Suction cups with guide tube and electric trolley • 4 units available, brand new and unused • Immediately available IV: + Design Standards 1. The construction of the unit strictly complies with European CE standard EN13155:2016, American ASME (Mechanical Engineering Association) B30-20-2006, and German UVVI8 regulations. The key design parameters exceed the requirements of the aforementioned standards. 2. Safety factor: The main structure features a factor of 4.0, vacuum safety level is 65%, and the standard safety level is 85%, which is 20% above the standard safety requirement. Lhsdpfx Asxnvq Ejb Tsc V+ Equipment Inspection and Standards 1. General Check that all materials are complete, inspect if the equipment exterior is painted or scratched, check for damage to the suction cups and pipes. 2. Pre-shipment Inspection © Equipment suction test © Equipment pressure holding test © Alarm system test © Various control components • Price on request

Condition: excellent (used), Omga V 113 P double mitre saw for frames Double saw set at a 45-degree angle Saw blade diameter: 300 mm Saw blade bore diameter: 30 mm Two motors, each with 1.1 kW power Maximum cutting width: 70 mm Maximum cutting height: 75 mm Pneumatic material clamps Lhodpfjyaa Uyjx Ab Tsc

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Circular saw in very good condition Lhedpfx Abjt Uk Rme Tsc

Condition: repair required (used), Stroj za struženje manjših koškov iz lesa stroj dela debelino od 7 -45 mm Lhedpsuknznofx Ab Tec

Condition: used, Year of construction: 1989, - Year: 1989 - Documentation available: No - CE certificate present: No - Serial number: 106 - Max. cutting height [mm]: 80 Ledpfxoxaniws Ab Tehc - Max. saw blade diameter [mm]: 350 - Max. spindle speed [rpm]: 3700 - Voltage [V]: 380 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels