Milling motor for edge processing machines

Perske KNS 21.05-2

Condition: used, Milling units for radius milling on edge banding machines, or milling motors including radius cutters for top/bottom or left/right, Perske type KNS 21 05/2. Iedpfjwuublex Apystg Removed from a functional machine, but untested.

Condition: excellent (used), Year of construction: 2017, operating hours: 8,496 h, lifting height: 4,050 mm, fuel type: diesel, mast type: duplex, total height: 3,050 mm, total length: 5,200 mm, total width: 2,050 mm, color: other, Year of manufacture: Jun 2017 Empty weight: 11.280 kg Lifting capacity: 7.000 kg CE mark: yes Technical condition: very good Visual appearance: very good Registration number: TKG-48-H General Country of production: Italy Condition Itodpjyr D Stjfx Apyjg CE type: CE Hydraulic fork positioner, Table width 1200 mm, Initial lift, Pneumatic tires

Condition: good (used), Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor Itsdpfx Apjcx Ifieyeg -Voltage: 165 volts -Power: Motor 0.22 kW 17250 rpm at 300 Hz -Socket: Ø 15 mm -Thread: right -Number: 5x motors available -Price: per piece -Dimensions: 200/70/H90 mm -Weight: 1.8 kg

Condition: used, Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Voltage: 133 volts -Power: 0.15 kW 11160 rpm at 200 Hz -Recording: Ø 15 mm -Thread on the left -Number: 6x motors available -Price: per piece Itjdjcx Ifdopfx Apysg -Dimensions: 200/70/H90 mm -Weight: 1.7 kg

Condition: used, Vacuum lifting device for paper rolls NAGRON AEROLIFT Vacuum lifter for the paper industry Woudenberg Holland type R96-20 Isdpfxodzqc Io Apyetg No. 9745 Year of construction 1999 Load capacity 2000 kg Centering pin Ø 90 mm Suction surface outside diameter 850 mm (plus seal) Suction surface inner diameter 250 mm (minus seal) Seal width 50 mm Suction area 0.5 m2 Vacuum min. -800 mbar Suction capacity approx. 100 m³/h per vacuum pump Motor power 2x 2.2 kW Mains connection 400 Volt, 50 Hz - 2 Rietschle vacuum compressors, type VCE 100 Dimensions Ø x H 1600 x 2250 mm Height with centering mandrel 2500 mm Total height in transport frame 2950 mm Dead weight 2.5 tons

Condition: used, Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor Itedpfx Apjcx Iffeysg -Voltage: 165 volts -Power: Motor 0.22 kW 17250 rpm at 300 Hz -Socket: Ø 20 mm -Thread: right -Dimensions: 200/70/H85 mm -Weight: 1.9 kg

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor Isdpfxsb A Rt Es Apyetg -Power: 0.15 kW at 11160 rpm at 200 Hz -Voltage: 133 volts -Receiving shaft: Ø 15 mm -Tool: Ø 150 x 3.0 mm -Dimensions: 200/85/H70 mm -Weight: 2.7 kg

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 4 kW 8760 rpm at 300 Hz -Shaft mounting: Ø 30mm -Dimensions: 390/160/H180 mm -Weight: 25 kg Ijdpfx Aob A Nl Njpyetg

Condition: used, Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor Iodpfx Apofkg Hrsyetg -Power: 0.15/0.22 kW 11160/17250 rpm at 133/200 V/200/300 Hz -Shaft holder: Ø 15 x 15 mm -Dimensions: 190/70/H95 mm -Weight: 1.8 kg

Condition: used, Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Voltage: 165 volts -Power: 0.22 kW 17250 rpm at 300 Hz Itodpfx Ascx Ifcepyog -Collet holder: Ø 8 mm -Thread: right -Number: 3x engines available -Price: per piece -Dimensions: 200/80/H90 mm -Weight: 1.8 kg

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 26018/2, Year of construction: 2012, operating hours: 23,177 h, load capacity: 5,000 kg, lifting height: 4,450 mm, load center: 500 mm, fuel type: gas, mast type: mono, construction height: 2,850 mm, power: 55 kW (74.78 HP), motor manufacturer: VW, gearing type: hydrostat, fork length: 1,600 mm, front tire type: cushion tires (black), rear tire type: cushion tires (black), empty load weight: 7,400 kg, Equipment: UVV, cabin, clamp, lighting, sideshift, Telescopic clear-view mast, overall height: 2850 mm, lift height: 4450 mm, clamp attachment with side shifter, fork length: 1600 mm, road lighting in accordance with German road regulations (StVO), LED work lights front and rear, fully enclosed cab with heating (left door missing!), VW LPG engine, double pedal foot controls, 6x SE tires, twin tires at the front, operator's manual included. Technical condition at sale: Forklift has been technically overhauled! Major maintenance newly completed! UVV safety inspection passed without defects! Delivery: In perfect condition! 20 years of professional experience! INSPECTION AND TEST DRIVE: Isdpfey Ruhwox Apystg Viewings and test drives possible by appointment during business hours: Monday to Friday, 8:00 am to 6:00 pm. Saturday from 8:00 am to 1:00 pm. TRANSPORT: Low loader or curtain-sided truck available at competitive prices.

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 0.15 kW at 11160 rpm at 200 Hz -Power: 0.22 kW at 17250 rpm at 300 Hz -Voltage: 133/200 volts -Receiving shaft: Ø 15 mm -Tool: Ø 150 x 3.0 mm -Dimensions: 200/85/H70 mm -Weight: 3 kg Itsdpfxsb A Slzs Apysg

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor -Manufacturer: Perske, milling motor type KNS 21.05-2 with bracket -Power: 0,15 kW 11160 U/min Itodpfxjvy Amzo Apyeg -Voltage: 133 V / 200 Hz -Mounting shaft: Ø 15 x 15 mm -Saw blade. Ø 140 mm -Number: 2x milling motor available -Price: per piece -Dimensions: 260/200/H200 mm -Weight: 4.8 kg/piece

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor Itodpovy Sryofx Apyog -Manufacturer: Perske, milling motor type KNS 21 05/2 with bracket -Power: 0.15/0.22 kW 11160/17250 rpm -Voltage: 133/200V / 200/300 Hz -Mounting shaft: Ø 15 x 15 mm -Saw blade. Ø 140 mm -Dimensions: 260/200/H200 mm -Weight: 4.5 kg.