1996 Pressta Eisele Dyno 6

Pressta Eisele Dyno 6

Condition: good (used), Year of construction: 1991, functionality: fully functional, saw blade diameter: 400 mm, cutting range round steel at 90°: 145 mm, total length: 850 mm, total height: 1,800 mm, total width: 1,100 mm, overall weight: 700 kg, Semi automatic circular saw, blade Ø 400 mm new, capacity Ø ca. 145 mm, motor 3,0 / 4,0 kw 2-speed 1420/2880 rpm, vertical clamp, horizontal clamp, stops 30°, 45°, 60° 90° double side, coolant device; dimension 85x110x180 cm, weight ca. 700 kgs Pgjdewp Ipxjpfx Ab Uei

Condition: used, Year of construction: 1983, saw blade diameter 400 mm cutting diameter 130 mm stroke 150 mm cutting range - square - 120 x 120 mm cutting range - flat - 300 x 40 mm capacity 45 degrees: round 130 mm capacity 45 degrees: square 110 x 110 mm Podpfotqqrzsx Ab Usgi capacity 45 degrees: flat 245 x 40 mm mitter cutting - all-position 90 ° cutting speed 13 / 25 m/min control minipos 807 total power requirement 4,3 kW weight of the machine ca. 850 kg dimensions of machine L x W x H 1,20 x 1,20 x 1,82 m Accessories: ingoing and outgoing rollertrack each approx. 4000 mm long, NC length stop, coolant

Condition: good (used), MITRE COLD CIRCULAR SAW MACHINE Pgedpfx Ajxnmn Ueb Uei Type: KKS 400 H Year of manufacture: 1982 Equipment: - Infeed roller conveyor 1000 mm, left - Outfeed roller conveyor with length stop, 2000 mm, right - Saw blade diameter: 370 mm - Hydraulic clamping cylinder with 8 mm stroke, handwheel for pre-setting - Documentation Condition: good, workshop inspected

Condition: good (used), Year of construction: 1984, machine/vehicle number: 102335, Offer 23172 Technical data: - Saw blade diameter up to 400 mm Psdpjrmkl Asfx Ab Uegi - Cutting range with saw blade diameter 400 mm - at 90° round 130 mm - square 120 mm - flat up to 260 x 60 mm - Mitre adjustment left + right 0 - 90 ° - Cutting speed 1750 / 3500 m/min - Feed speed of the saw blade 0 - 3 m/min - Rapid return 3000 mm/min - Saw drive 400 V / 3.7 / 4.4 kW - Pneum. Material vice with adjustable clamping pressure - Space requirement approx. W 1200 x H 1900 x D 1200 mm - Weight approx. 600 kg - Outfeed roller conveyor 3000 mm - Infeed roller conveyor 3000 mm

Condition: good (used), Year of construction: 1981, machine/vehicle number: 55778, Offer 26002 Technical Data: - Saw blade diameter: up to 400 mm - Cutting capacity at 90°: • Round: 130 mm • Square: 120 mm • Rectangle: 300 x 40 mm • Or: 240 x 85 mm Pgedpfxjyffrze Ab Uji - At 45°: • Round: 130 mm • Square: 110 mm • Rectangle: 245 x 40 mm - Mitre adjustment left and right each 0 – 90° - 2 cutting speeds: 13 + 26 m/min - Drive: 400 V / 1.2 / 1.8 kW - Saw blade feed speed hydraulically steplessly adjustable - Hydraulic metal clamping - Coolant system - Infeed roller table approx. 3000 mm - Outfeed roller table with length stop approx. 4000 mm - Space requirement approx. W 800 x H 1850 x D 1100 mm - Weight approx. 850 kg

Condition: used, Year of construction: 1979, machine/vehicle number: Res BS, Demag PK2 Chain Hoist Crane Lifting Unit 250kg / 500kg Approx. 40 units available!!! 250kg / 0.25t rated load / lifting capacity – single fall – 500.- 500kg / 0.5t rated load / lifting capacity – double fall – 600.- With 2 lifting speeds, lifting height approx. 3-4m Complete with pendant control and load hook Total weight approx. 40kg, 380V 50Hz connection Pgsdpfx Ajvzkyleb Usi Top condition, fully functional. Not a worn or used device! Connect and start operating. Comes from ongoing operations Item location: 75053 Gondelsheim See pictures

Condition: good (used), Year of construction: 1988, Electric chain hoist, crane, overhead crane, assembly crane, manual trolley, trolley, trolley drive, crane drive, crane travel, trolley Psdpox Ikcrefx Ab Usgi -Manufacturer: Abus, electric chain hoist with driven chassis -Chain hoist: Abus type GM3- Load capacity 500 kg -Main stroke: 6 m/min -Fine stroke: 1.5 m/min -Chain length: 3 m -Chassis: Abus -Beam width: max. 260 mm -Dimensions: see photo and technical drawing -Transport dimensions: 520/400/H440 mm -Weight: 41 kg

Condition: used, Electric chain hoist, DEMAG crane Type PK2N-F Serial no.: 5785034 Year of manufacture: 1988 Load capacity: 500 kg Hook travel: 5 metres Main lifting speed: 5 m/min Precision lifting speed: 1.25 m/min Control pendant cable length: approx. 3.5 metres Power supply: 400 Volt, 50 Hz Pjdpfxsxf Uqfe Ab Uogi - 2 load chains = 500 kg - Electric trolley DEMAG, type 13/3 PF8 with 1 travel speed approx. 8 m/min, type 13/3PF 8 - For double-T beams with approx. 100 to 200 mm flange width Weight: 63 kg Good condition

Condition: ready for operation (used), saw blade diameter: 400 mm, For Sale: KALTENBACH Circular Saw for Aluminium and Non-Ferrous Metals Model: SKL 400 H Saw blade diameter: Ø 400 mm Cutting range at 90° round material: 130 mm Square material: 120 mm Profile width: 315 x 40 mm 45° profiles (horizontal): 220 x 60 mm Pgodeyhqduepfx Ab Usi Profiles (vertical): 80 x 120 mm Cutting speeds for HSS and carbide saw blades: 1300 / 3000 m/min For carbide saw blades: 1750 / 3500 m/min Drive motor 1430 / 2880 rpm: 3.7 / 4.5 kW Saw blade feed rate steplessly adjustable: 0 - 1100 mm/min Saw blade rapid return: 3000 mm/min Machine weight: 650 kg Dimensions (W x D x H): 1000 x 1300 x 1950 mm