Lathe

REALMECA T2

Condition: new, cutting diameter 225 mm saw band length 2480 mm cutting width 250 mm cutting speed 45 / 90 m/min dimensions of saw-band 2480 x 27 x 0,9 mm capacity 45 degrees: flat 135 x 185 - 145 x 150 mm capacity 45 degrees: round 150 mm capacity 45 degrees: square 145 mm capacity 60 degrees: flat 63 x 107 - 69 x 90 mm capacity 60 degrees: round 70 mm capacity 60 degrees: square 70 mm capacity 90 degrees: flat 240 x 160 - 250 x 110 mm capacity 90 degrees: round 225 mm capacity 90 degrees: square 185 mm total power requirement 0,75 / 1,1 kW Pgedpfxjlb I Daj Amisk weight of the machine ca. 200 kg dimensions of the machine ca. 1385 x 580 x 890 mm Technical features: - Hydraulic head descent control system - End stop at the end of the cut - Powerful three-phase induction motor with 2 speeds and Transmission with oil bath - Saw frame, vice and swivel group made of cast steel - Steel blade guide with ball bearings - Vice with quick clamping - Lever integrated on the front for locking the miter adjustment - Coolant pump with aluminum body - Large hand wheel for easy saw blade tension - Pressure gauge to show the belt tension (600-1000 kg/cm3) - Emergency stop safety switch - Swarf brush for cleaning the saw blade STANDARD EQUIPMENT: - Mountable base cabinet - coolant tank - Electric coolant pump - Length stop for serial cuts - Band change and settings tools - Chip removal brush - Hydraulic cylinder with feed control

Condition: excellent (used), Year of construction: 2011, Weiler Primus VC precision lathe Year of manufacture: 2011 Technical details Turning diameter: 250 mm Turning length: 500 mm Center height: 140 mm Swing diameter over bed slide: 280 mm Max. swing diameter over cross slide: 150 mm Main spindle: Speed range – main spindle: 30 – 4,000 rpm Power 4.0 kW Number of gear stages: 1 Spindle head: 5 / DIN 55027 Spindle diameter in front bearing: 70 mm Spindle bore: 40 mm Usable bar diameter: 40 mm Tool holder: System: MultiFix B Turning tool shank cross-section: 20 x 20 Psdpsw Ebdbjfx Amijgk Tailstock: Quill travel: 85 mm Quill diameter: 40 mm Tailstock taper: MK 3 Feeds: Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Cross feed: 0.006 – 0.2 mm/rev Thread cutting: Metric: 0.25 – 8 mm Inches: 80-2 1/” Travel distances: X-travel Cross slide travel: 150 mm Z-travel by cross slide: 500 mm Z-travel by top slide: 110 mm Total power requirement: 15 kVA Machine weight: approx. 800 kgs Space requirements: 1400x935x1550 mm Accessories/options: - Documentations - 3-jaw chuck diameter 160mm, with jaws - 4-jaw chuck diameter 160mm, with jaws - Collet type chuck with collets - Tailstock - Multifix tool holder, with holders - Steady - Change gears - Different kind of tooling - Lista cabinet - Spare parts - etc... Under power in our warehouse.

Condition: new, Year of construction: 2024, operating hours: 15 h, functionality: fully functional, warranty duration: 5 months, type of input current: AC, input voltage: 240 V, measuring range X-axis: 580 mm, measuring range Y-axis: 300 mm, measuring range Z-axis: 200 mm, total width: 579 mm, total length: 916 mm, total height: 844 mm, overall weight: 45 kg, workpiece weight (max.): 50 kg, VL-770 3D measuring system with motorized rotary table Ø500mm - Measuring head VL-770 - Control unit VL-700 - Object table 500mm VL-750 - Measuring range with composition up to Ø500mm or 580x300mm - Cover (darkening) - Software package (German) - Calibration plate - Software module for form and position tolerances Pgsdpovzqp Hefx Amisk - Software module for CAD conversion Full description in the brochure

Year of construction: 1992, condition: good (used), machine/vehicle number: D 49468, Offer 18014 Technical data: - grinding wheel diameter approx. 125 mm - 2 wheel speeds 1450 / 2200 rpm - right, - left rotation - inclinable fixed support table ATF 340 x 150 mm Pedpok Rartefx Amiogk - support table -5° to +15° inclinable - illumination - drive 400 V / 0,65 / 0,9 kW - working height 1000 mm - space requirement approx. W 850 x H 1150 x D 550 mm - Weight approx. 120 kg

Condition: excellent (used), Year of construction: 2007, Fagor CNC lathe Pgedpfx Amjym Ef Rsisk Full specifications available in photos Machine in excellent condition

Condition: used, Year of construction: 2000, Good day. Pedpfjxrfb Ijx Amiegk For sale are 3 C2 Universal Plus milling machines by Realmeca. Year of manufacture: 2000, with low operating hours. Specifications: Power supply 380 V – FAGOR control – dialog programming – programming with ISO G-code – ball screw drives and linear ball guides – 3 electronic handwheels – travel X: 300 mm – travel Y: 200 mm – travel Z: 300 mm – table size: 475 x 220 mm – rapid traverse: 5 m/min – feed rates: 0 to 5000 mm/min – resolution: 0.001 mm – spindle speeds: 100 to 4000 rpm – spindle taper: ISO25 – electric quick-change device – spindle power: 3.5 HP – integrated lighting – workpiece cooling. Machine dimensions: width: 1500 mm – depth: 1800 mm – height: 1850 mm – weight: 2000 kg. Further information and price upon request.

Condition: excellent (used), ECOCA MT 312-750 CNC Lathe Year 2006 CNC Control Fanuc 21i-TB Swing over bed 600mm Swing over saddle 450mm Pgedpfx Amsyka Smoiek Turning dia 450 over bed Spindle bore 102mm Spindle speeds 0-3200rpm Spindle power 18.5/22kw Turning length 730mm Tailstock Tool arm 12 station turret 12” 3 Jaw Chuck Swarf conveyor Filtermist extraction Tool holders

Condition: used, Year of construction: 1993, CNC Lathe REALMECA type T400 Travel X: 200 mm Podpfxexnpbwo Amiegk Travel Z: 600 mm Numerical Command: NUM 750 Between points distance: 700 mm Max machining diameter: Ø 210 mm Spindle speed: from 100 to 4000 RPM 12 tools Turret VDI 20 3-jaws chuck Ø 140 mm Year of construction: 1993 Spindle motor: FANUC Tailstock: CM4 Hydraulic Tailstock + Chuck Lubrification Voltage: 380 V Dimensions (L x W x H): 2500 x 1500 x 1700 mm Weight: approx 3 T

Condition: good (used), Forced mixer, agitator, stirring device, mixing tool, stirrer Pjdpfjb A Rglex Amisgk -Nominal input: 1000 watts -Connection: 230 volts -Speed: 500 rpm -Dimensions: 500/200/H100 mm -Weight: 5 kg

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 21450012211002129, Year of construction: 2024, operating hours: 2,262 h, construction height: 200 mm, construction width: 270 mm, working length: 330 mm, Equipment: CE marking, Hardly used showroom machine with very few operating hours! TECHNICAL DETAILS Build volume: 330 mm x 270 mm x 200 mm Layer height: from 50 µm Precision X, Y: 150 µm MACHINE DETAILS Technology: FFF + CFR (Continuous Fiber Reinforcement) Compatible materials: Onyx, Onyx FR, Onyx ESD, Nylon White, Carbon fiber, Glass fiber, Kevlar, HSHT Pedexu E Srspfx Amisgk Operating hours: 2,262 h EQUIPMENT Eiger software (cloud and local) Connections: Ethernet, Wi-Fi, USB Material dry box for safe storage Continuous fiber reinforcement: carbon fiber, glass fiber, Kevlar Enclosed build area for optimal thermal stability High-resolution optical encoders Prepared for Blacksmith (automatic dimensional calibration) Certificates: CE, FCC, UL, UKCA