Lathe - cycle-controlled

Weiler C 30

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Weiler C30 Cycle Lathe (2011) Manufacturer: Weiler Type: C30 x 750 Year of manufacture: 2011 Condition: very good, used, optional with new maintenance before delivery Center distance 750 Swinging diameter over bed 330mm Swinging diameter over cross slide 160mm Travel of cross slide 180mm Bed width 240mm Turning tool cross-section 20 x 20mm Spindle head according to DIN 55027, size 5 Spindle diameter in the front bearing 70mm Nwjdpfx Ajztyqmjhnek Spindle bore 40.5mm Internal taper of the main spindle 5mm Drive power 60 %/100 % ED 9/7kW Total speed range 1 – 4,500 rpm Feed force longitudinal 6,000N Feed force facing 3,000N Feed range 0.001 – 10 mm/rev Rapid traverse rate longitudinal/facing 6/3 m/min Metric threads 0.1 – 400mm Inch threads 56 – 1/4 G/inch Module threads 0.125 – 28mm DP threads 224 – 1 Dp Max. number of thread starts 99 Tailstock diameter 50mm Tailstock travel 130mm Internal taper of the tailstock MK3 Length 1750mm Width 1350mm Height 1670mm Weight 1300kg Scope of delivery Chuck Multifix including 17 tool holders Machine lamp Coolant system Machine feet Original documentation Drawer cabinet

Condition: like new (used), Year of construction: 2010, functionality: fully functional, spindle bore: 50 mm, turning diameter: 400 mm, turning diameter over bed slide: 400 mm, turning diameter over top slide: 250 mm, center height: 200 mm, center width: 1,000 mm, turning length: 1,000 mm, quill stroke: 120 mm, quill diameter: 50 mm, total length: 1,950 mm, total width: 1,060 mm, total height: 1,635 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 40 rpm, rotational speed (max.): 3,000 rpm, rotational speed (min.): 40 rpm, center height over cross slide: 200 mm, overall weight: 865 kg, spindle mount: MK 3, spindle motor power: 5,300 W, Equipment: documentation/manual, rotational speed infinitely variable, type plate available, EMCO EMCOMAT-20 D universal lathe in very good condition, complete with tool cabinet and various quick-change tool holders, collets, and 3 RÖHM chucks. Manufacturer: EMCO Model: EMCOMAT-20 D Year of manufacture: 2010 Condition: very good, fully functional Location: Graz (Austria) Highlights at a glance: - Center distance 1000 mm – ideal for longer workpieces - Stepless speed control up to 3000 rpm - Robust, induction-hardened machine bed - Hardened and ground guides & gears - Electromechanical spindle brake - Very stable design – 865 kg machine weight - Safety monitoring via electrical limit switches - Equipped with a modern 3-axis digital display Technical data: - Center distance: 1000 mm Nwedpfxsyxvqvj Ahnek - Center height: 200 mm - Turning diameter: 400 mm - Spindle bore: 50 mm - Speed: 40 to 3000 rpm - Spindle connection: DIN 55029 size 5 - Drive power: 5.3 kW - Tailstock diameter: 50 mm - Arbor: MK3 - Stroke: 120 mm - Dimensions (LxWxH): 1950 x 1060 x 1635 mm - Weight: approx. 865 kg Optional equipment: - Coolant system - 3-axis positioning display with 0.001 mm accuracy Scope of delivery: - 1 x EMCO EMCOMAT-20 D - 1 x Drawer cabinet with various tools, collets, etc. (see pictures) - 2 x RÖHM chucks (3 and 4-jaw chucks) - 6 x Quick-change tool holders (see pictures) - 1 x Complete manufacturer documentation (operating manual, wiring diagram, etc.) Quality & Safety: The machine impresses with the typical EMCO quality “Made in Austria”: Are you interested? Please contact us to arrange a viewing appointment or to request a quote.

Condition: excellent (used), Year of construction: 2014, - Accessories included. - Control system: WEILER C3 based on Siemens SINUMERIK 840D WORK AREA Center height 165 mm Swinging diameter over bed 330 mm Swinging diameter over cross slide 160 mm Distance between centers 750 mm TURRET Turret head DIN 55027/DIN ISO 702-3, size 5 Spindle bore 43 mm Spindle diameter in the front bearing 70 mm MAIN DRIVE Drive power 60%/100% ED 9/7 kW Speed range 1 – 4,500 rpm Number of speeds stepless FEED RANGE Number stepless Longitudinal 0.001 – 10 mm/rev Transverse 0.001 – 10 mm/rev Feed force longitudinal 6,000 N Feed force transverse 3,000 N Max. rapid traverse speed longitudinal/transverse 6/3 m/min THREAD CUTTING RANGE Nwsdpfxjztxq Ee Ahnok Metric threads 0.1 – 400 mm Inch threads 56 – 1/4 threads/inch TAILSTOCK Tailstock spindle diameter 50 mm Tailstock quill stroke 110 mm Internal taper DIN 228 MK 3 mm

Condition: new, cutting diameter 225 mm Nwedpfx Aslb I Dashnsk saw band length 2480 mm cutting width 250 mm cutting speed 45 / 90 m/min dimensions of saw-band 2480 x 27 x 0,9 mm capacity 45 degrees: flat 135 x 185 - 145 x 150 mm capacity 45 degrees: round 150 mm capacity 45 degrees: square 145 mm capacity 60 degrees: flat 63 x 107 - 69 x 90 mm capacity 60 degrees: round 70 mm capacity 60 degrees: square 70 mm capacity 90 degrees: flat 240 x 160 - 250 x 110 mm capacity 90 degrees: round 225 mm capacity 90 degrees: square 185 mm total power requirement 0,75 / 1,1 kW weight of the machine ca. 200 kg dimensions of the machine ca. 1385 x 580 x 890 mm Technical features: - Hydraulic head descent control system - End stop at the end of the cut - Powerful three-phase induction motor with 2 speeds and Transmission with oil bath - Saw frame, vice and swivel group made of cast steel - Steel blade guide with ball bearings - Vice with quick clamping - Lever integrated on the front for locking the miter adjustment - Coolant pump with aluminum body - Large hand wheel for easy saw blade tension - Pressure gauge to show the belt tension (600-1000 kg/cm3) - Emergency stop safety switch - Swarf brush for cleaning the saw blade STANDARD EQUIPMENT: - Mountable base cabinet - coolant tank - Electric coolant pump - Length stop for serial cuts - Band change and settings tools - Chip removal brush - Hydraulic cylinder with feed control

Condition: excellent (used), Year of construction: 2018, arm reach: 1,300 mm, Reach: 1300 mm Load capacity: 12.5 kg Weight: 33.5 kg Type: MSIP-REM-URK-UR10 Year of manufacture: 2018 Serial number: S300711 Lorch S5 RoboMIG XT cobot welding system 400-A welding system. Nwsdpow N N Dcsfx Ahnjk

Year of construction: 1990, condition: used, machine/vehicle number: 9072492, nominal capacity: 100 kVA Nwedpfx Ajz H Dyehnsk throat: 500 mm spark plug air gap: 330 - 500 mm electrical connection: 400 V kW space needed: 700 x 1420 x 2000 mm weight: 750 kg

Condition: as good as new (ex-display), Year of construction: 2022, Two-axis positioner for Kuka industrial robots Maximum load capacity: 500 kg Positional repeatability: 0.1 mm Overall height: 982 mm Tilting range: +/- 93° Rotation range: unlimited Installation position: floor-mounted Rated welding current (100% duty cycle) = 500 A (60% duty cycle) = 600 A Nwedpfx Ahjlhr H Henok

Condition: reconditioned (used), Year of construction: 2016, operating hours: 13,425 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: FANUC, controller model: 0i-MF, table load: 600 kg, spindle speed (min.): 80 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, spindle motor power: 15 W, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 80 mm, tool weight: 8 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, USED ​​DOOSAN DNM 4500 vertical machining center with Fanuc 0i-MF CNC Nodpfxoynlzus Ahnowk

Condition: new, metric thread diameter (min.): 3 mm, metric thread diameter (max.): 16 mm, overall weight: 500 kg, feed length X-axis: 3,000 mm, feed length Y-axis: 1,500 mm, feed length Z-axis: 200 mm, torque: 24 Nm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 50 rpm, power: 0.005 kW (0.01 HP), The CMA 3-axis controlled tapping center is designed for the post-processing of laser-cut sheet metal parts and complete processing of small parts and tubes, for example. The machine offers the following processing options: - Thread cutting - Drilling (standard / with chip breaking / hollow profile cycle) - countersinking - Flow drilling (with optimum feed curve) - reaming - Simple graphical programming - Import of 2D DXF or DWG files - Machine table according to System 28 (similar to Demmeler and Siegmund welding tables, among others) - Radial compensation of the tool by means of patented tool holder (accessory) - Tool probe for length measurement and as a breakage detector - Intuitive safety system using light barriers Standard version: Automatic tool changer with 10 positions, mounted on the machine portal Njdpfjrbz T Njx Ahnowk

Condition: ready for operation (used), Year of construction: 2022, operating hours: 3,728 h, functionality: fully functional, machine/vehicle number: 0040001634C, turning length: 500 mm, turning diameter: 240 mm, spindle motor power: 1,400 W, spindle speed (min.): 5,000 rpm, spindle speed (max.): 6,000 rpm, spindle bore: 170 mm, travel distance X-axis: 210 mm, travel distance Y-axis: 525 mm, travel distance Z-axis: 525 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 22 m/min, rapid traverse Z-axis: 30 m/min, torque: 171,192 Nm, feed force X-axis: 3 N, The DMG MORI CTX Alpha 500 was manufactured in 2022. This versatile turning center is equipped with a Siemens controller and LNZ Quick load servo 80S2. Weight: 4,300 kg. Please contact us for more information about this machine. Nwjdpfjyz S T Ssx Ahnsk