Vertical Turret Lathe - Single Column

SCHIESS 25 DKE 250

Condition: like new (used), Year of construction: 2024, functionality: fully functional, turning length: 1,275 mm, turning diameter: 481 mm, spindle bore: 102 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 20 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,350 mm, spindle motor power: 26 W, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 30 m/min, total height: 1,907 mm, total length: 5,300 mm, total width: 2,105 mm, type of input current: three-phase, overall weight: 6,900 kg, spindle nose: ASA 11, Equipment: documentation/manual, rotational speed infinitely variable, USED ​​2-axis CNC lathe "DN Solutions model PUMA GT3100L" with DN Solutions-Fanuc i-Plus iHMI CNC complete with chip conveyor, Morari self-centering steady rest with 15-170mm opening, automatic doors, 12-position turret, auto power off and tool life management. Gjdpfxewuti Us Abhjkd

Condition: used, Year of construction: 2008, x-travel 500 mm y-travel 450 mm z-travel 400 mm Control HEIDENHAIN Gedpewlvi Eofx Abhekd control MillPlus iT table surface area ø 500 x 380 mm B-axis 0 - 161,955 ° C-axis 360 ° spindle taper SK 40 spindle turning speed range 20 - 18.000 U/min spindle power max. 35 kW max. torque on the spindle max. 130 Nm feeds -stepless- bis 20.000 mm/min rapid traverse X/Y/Z axis 80 / 50 / 50 m/min rapid traverse B-axis 40 U/min C-axis rapid feed 50 U/min no. of tools in magazin 30 tool diameter if 2 vacant positions 130 mm tool diametre at full load 80 mm tool length - max. 300 mm weight of tools max. 6 kg internal coolant system feed 40 bar total power requirement 52 kVA weight of the machine ca. 6 t = 5-axis machining center with 2-axis NC swivelling rotary table Accessories: electron. handwheel, chip conveyor, coolant, band filter device

Condition: used, Year of construction: 2010, Technical details: x-travel: 6500/13500 mm y-travel: 4000 mm z-travel: 1500 mm w-axis: 2250 mm table surface area: 5500/12500 x 3000 mm max. workpiece weight: 50.000/75.000 kg ram head dimension: 520 x 625 mm milling spindle motor: 67,4 ( s1/100% ) kW max. torque on the spindle: 2900 Nm tool taper: DIN 69893 HSK-A 100 milling head speed: 1 - 1000 / 5 - 5000 U/min feed speeds: 1 - 24000 mm/min w-axis: 1 - 6000 mm/min. Gksdpfxjway I Uo Abhsd distance between columns: 3500 mm passage: 3000 mm total power requirement: 120 kW weight of the machine ca.: 250 t dimensions of the machine ca.: 29,5 x 9,5 x 8,2 m with CNC SIEMENS 840 D autom. tool magazine for 212 tool stations autom. milling head magazine for 6 milling heads 1 milling head -straight- 67 kW, 2900 Nm, 5000 rpm, HSK-A 100 2 milling head -straight extended- 40 kW, 1700 Nm, 5000 rpm, HSK-A 100 3 milling head -angular head extended- 40kW, 4000 rpm, 1800 Nm, HSK-A 100 4 milling head -angular head - 67 kW, 4000 rpm, 2900 Nm, 360 x 1°, HSK-A 100 5 milling head -angular head - 67 kW, 4000 rpm, 2900 Nm, 360 x 1°, HSK-A 100 6 milling head -universal Index head - 40 kW, 4000 rpm, 2100 Nm, C-axis 360 x 1°, B-axis +/- 110 x 1°, HSK-A 100 coolant attachment, chip conveyor *

Condition: used, Year of construction: 2017, x-travel 6.000 mm y-travel 3.500 mm z-travel 1.500 mm Control iTNC 530 HSCI Heidenhain Max. Speed 15.000 min/-1 power capacity - main spindel 63 kW max. Torque 300 Nm swivellable A: 220° (+/- 110) ° rotatable C: 550° (+/- 275) ° tool taper HSK 100A DIN 69893 1+2 table surface area 6.000 x 3.500 mm max. workpiece length 4.940 mm max. workpiece width 2.440 mm max. workpiece height 970 mm number of toolpositions 26 pos. tool taper HSK 100A max. tool length 400 mm max. tool diameter 130 mm max. tool weight 15,0 kg rapid traverse ( X / Y / Z ) 65 m/min feed speeds 65.000 mm/min total power requirement 150 kW weight of the machine ca. ~ 130,00 t dimensions of the machine ca. 11,0 x 10,0 x 7,0 m Gksdpfx Abev N N R Eohed CNC-Gantry Milling Machine FOOKE - Endura 908 linear - Fork-Turn-Swivel-Milling Head Type 8 (A+C Axis) - 5-Axis- and 5-Side-HSC-Machining (simultaneous) - High Dynamic - Construction - Setup with FOOKE possible as an option

Condition: ready for operation (used), POREBA parallel lathe Gkjdpjv Dv Rhefx Abhjd TCC 160 type chuck diameter 1600 point height 900 max turning diameter 1800 turning diameter on the carriage 1200 between centers 10 meters documentations visual 3 glasses electricity

Condition: good (used), Year of construction: 2005, operating hours: 84,564 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, nominal power (apparent): 17 kVA, controller manufacturer: iTNC 530 Heidenhain, controller model: iTNC 530 Heidenhain, total height: 2,500 mm, total length: 3,000 mm, total width: 3,000 mm, table width: 500 mm, table length: 650 mm, table load: 200 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 10,000 rpm, operating hours of spindle: 22,855 h, spindle motor power: 13,000 W, number of slots in tool magazine: 16, tool length: 300 mm, tool diameter: 130 mm, tool weight: 6 g, Equipment: rotational speed infinitely variable, The machine is in good condition. A few things have been redone and freshened up. The following has been overhauled: -Complete X-axis bearing including ball screw and bearing -Various hydraulic components -Tool changer reset and sensors replaced -New door switch installed -New discs installed (unfortunately already got some flying chips again) -New coolant pump -New screen, as it was defective -New handwheel HR410 The machine does not have many spindle hours or switch-on hours. The machine has never seen a series production and has always been operated sensibly. Warm-up programs etc. We are tool and mold makers, so we tend to do more complex contours rather than heavy machining. I am only selling this because I need a simultaneous machine and also more travel paths. Technical data: Year of manufacture 2005 Gsdjvtnm Hepfx Abhekd x-travel 500 mm y-travel 450 mm z-travel 400 mm Control iTNC 530 Heidenhain Main spindle Speed range - main spindle 20 - 10,000 rpm Drive power - main spindle 9 / 13 kW Torque 57 / 82 Nm Tool holder SK 40 Rotary table Table clamping area 630 x 500 mm Swivel range -5 / +110 ° Max. table load 200 kg T-slots 14 H7 T-slots - distance 63 mm C-axis +/- 360 ° Feeds: Rapid traverse (X / Y / Z) 12 m/min Feed rate 10,000 mm/min Tool changer: Tool positions 16 pos. Max. tool weight 6 kg Max. tool length 300 mm Max. tool diameter 80 mm Max. tool diameter with free adjacent box 130 mm Tool holder SK 40 Total power requirement 17 kVA Machine weight approx. 3.6 t Space requirement approx. 3.0 x 3.0 x 2.5 m Tool milling machine - Universal DECKEL MAHO - DMU 50 Attention: no chip conveyor and no automatic measuring probe! - 5 axes (3+2) - WITHOUT tools Attached are pictures of the machine. The machine was intentionally not cleaned before taking the pictures, so it is in the "chip" and is used daily. You can also see the hours of the machine there. Kinematics and geometry are OK. for our needs, but could possibly be re-measured. We have never had any crashes etc.

Condition: good (used), In good technical condition and fully functional. Built in 1974 and overhauled including comprehensive modernization (Retrofix) of the CNC control including automatic central lubrication of the axes + hydraulic systems, water cooling, conductive rollers with brushes for a system for possible welding of the workpiece and complete protection against flying chips Heidenhain manual plus 4110 control system Gkjdpovnb T Nsfx Abhod Swing diameter over the bed 1250 mm and over the support 900 mm. Max. workpiece weight: 14,000 kg. Max. workpiece length: 3000 mm. Machine weight: 16,350 kg. Machine power: 80 KW. Machine dimensions: width 3000 mm, height 2100 mm and length 8000 mm. Accessories: faceplate including handles, support (steady rest), raised cutter head, universal chuck. Complete technical documentation, service history and documents on revisions and maintenance.

Condition: reconditioned (used), Year of construction: 2007, ELB Rotary 120 STC round table surface grinding machine 1200 mm table diameter, grinding height 550 mm, year of manufacture 2007, Siemens STC control, spindle power 22 KW, grinding wheel 500 x 100 x 203 mm, round table with hydrostatic guide, torque motor drive, full area cover, coolant system with paper belt filter, the machine is professionally overhauled by us and we are also happy to take care of the installation / training and subsequent on-site service! Financing / leasing, no problem, we would be happy to make you an offer! Godeuiafuopfx Abhekd

Condition: used, Year of construction: 2016, x-travel 1270 mm y-travel 650 mm z-travel 610 mm table surface area 1400 x 650 mm control Fanuc Oi MDF rapid traverse 36 m/min table load 1,0 t turning speed range 12000 U/min power capacity - milling spindle 15/25 kW max. torque on the spindle 118/159 Nm no. of tools in the magazine 48 Stück internal coolant system feed 20 bar tool taper SK 40 + Big Plus weight of the machine ca. 9,0 t Gkodouhrdgspfx Abhsd dimensions 4,45 x 3,3 x 3,24 m CNC- vertical machining centre with internal coolant. First installed in 2017 - coolant through the spindel 20 bar - 1x external chip conveyor - 2x internal chip conveyor - rigid tapping - Big Plus spindle - air through the spindel - external hand weel - coolant gun - USB and network connection

Condition: good (used), Press machine, hydraulic press, used machine Manufacturer: SEJFO Model: 7051-3 Overall dimensions: 800 x 1400 x 2480 mm Weight: 996 kg Stroke length: 300 mm Maximum hydraulic pressure: 140 Bar Year of manufacture: 1997 Gedjt A U Iropfx Abhjkd Hydraulic power supply: 380 V; 50 Hz