Vertical turning lathe

Schuster F40

Condition: excellent (used), Year of construction: 2014, operating hours: 21,200 h, functionality: fully functional, machine/vehicle number: 256316, turning length: 1,000 mm, turning diameter: 730 mm, spindle motor power: 18,500 W, spindle speed (min.): 35 rpm, spindle speed (max.): 12,000 rpm, travel distance X-axis: 1,100 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 900 mm, rapid traverse X-axis: 50,000 m/min, rapid traverse Y-axis: 50,000 m/min, rapid traverse Z-axis: 50,000 m/min, rotational speed (max.): 1,000 rpm, rotational speed (min.): 35 rpm, type of input current: three-phase, torque: 160 Nm, workpiece weight (max.): 680 kg, spindle nose: Cône 7/24, N°40, table load: 880 kg, number of slots in tool magazine: 120, pallet changer: automatic, Equipment: CE marking, chip conveyor, documentation/manual, Secondhand Mazal Integrex i500V Podsyymrmjpfx Afuegt

Condition: new, Year of construction: 2025, table length: 900 mm, table width: 450 mm, number of spindles: 1, spindle speed (min.): 8,000 rpm, table load: 500 kg, VMC 650 CNC machining center, milling machine with CNC system VMC 650 machining center is a multifunctional equipment that allows you to perform milling, drilling, thread cutting, and turning operations in automatic mode (if these options are available in the machine). The VMC 650 milling machine can have 16- or 24-position tool magazine. Depending on the customer's wishes, the milling machine can be equipped with a GSK, Siemens or Fanuc CNC system. It is possible to optionally add a Y-axis drive. As a very convenient additional option, we recommend installing a chip conveyor that will save you time when working with the equipment. Technical parameters: Worktable size 900x450mm Maximum workpiece weight 500 kg Movement along the axes X/Y/Z 800/450/500 mm Maximum distance from the spindle to the table surface 120-620 mm Motor power 5.5-7.5 kW Maximum spindle speed 8000 rpm Spindle type BT40 Positioning accuracy ±0.008/300 mm Repeatability ±0.005 mm Machine dimensions 300022752550 mm Machine weight 4000 kg It is also possible to supply CNC milling machines, machining centers with other table sizes: VMC 850 table 1000x500 mm VMC 855 table 1000x550 mm VMC 1060 table 1200x600 mm VMC 1160 table 1200x600 mm VMC 1275 table 1300x700 mm VMC 1370 table 1400x700 mm VMC 1580 table 1600x800 mm VMC 1680 table 1700x800 mm Pgjdpfexc I Dgjx Afust VMC 1890 table 2000x900 mm

Condition: used, Year of construction: 2007, functionality: fully functional, feed length Z-axis: 1,250 mm, turning diameter: 3,200 mm, turning height: 2,000 mm, faceplate diameter: 3,200 mm, DOUBLE RAM VERTICAL CNC LATHE KOLOMNA 1532 T KOLOMNA VERTICAL LATHE (VTL) • Table Ø 3,200 mm • Maximum turning diameter Ø 3,200 mm • Maximum workpiece height 2,000 mm • Two CNC-controlled RAMs • RAM travel 1,250 mm • FAGOR 8070 CNC • Motor power 115 kW • Mechanical, hydraulic, electrical and electronic retrofit new in 2007 • Chip conveyor • Complete enclosure • Cooling system Pgedpfex Nhm Rsx Afust • Work light • Refrigerated electrical cabinet

Condition: excellent (used), Year of construction: 1972, functionality: fully functional, We are offering this machine for sale. It is connected and can be tested under power. A video of the machine can be sent via WhatsApp. Pedpfx Asv Spvmofuogt Centre height above bed: 1,250 mm Maximum swing diameter over cross slide: 2,000 mm Maximum swing diameter over bed: 2,500 mm Maximum workpiece weight between centres without supports: 80 t Bed height: 700 mm Bed width: 3,000 mm Distance between centres: 7,000 mm Machine weight: approx. 160,000 kg

Condition: good (used), Year of construction: 2007, max. wheel diameter 500 mm Pgodpsvr Hf Ejfx Afuot gear width 200-400 mm module 12 turning speeds 0-3250 U/min bracke pressure bis max. 95 Nm inner taper Konus #39 Control Fanuc 16 total power requirement 15 kW weight of the machine ca. 6 t dimensions of the machine ca. 2.350 x 2.240 x 2.500 mm HIGHLY FLEXIBLE TESTING OF HARD, FINISHED AND GREEN SPIRAL BEVEL AND HYPOID GEAR SETS The T 60 bevel gear testing machine is a CNC testing machine with three linear axes for the fully automatic hard and soft testing of spiral bevel and hypoid gear sets with a 90° axis angle. It offers versatile objective and subjective testing options with speeds up to 3,250 min and braking torques up to max. 95 Nm.

Condition: good (used), workpiece diameter between centers: 2,286 mm, The No. 61 Angular Hypoid Tester is designed to test large bevel and hypoid gears up to 90" diameter and with shaft angles from 0 - 135 degrees. Spur, helical and internal gears can also be accommodated. The drive or pinion spindle can be rotated in either direction at a recommended spindle speed of 600 RPM. It is mounted in a head which is vertically adjustable on a column, so that the spindle can be offset either above or below the center line of the gear spindle for testing hypoid gears. The pinion head column is adjustable angularly in a horizontal plane to permit testing of gears of any shaft angle from 0 - 135 degrees. Specifications: Centerline of Drive Spindle to Nose of Brake Spindle (90 degrees shaft angle and without face plate): 38-1/2" Max. / 7-5/8" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and without face plate): 60" Max. / 10" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and with 54" face plate): 60" Max. / 28" Min. Centerline of Brake Spindle to Centerline of Drive Spindle (For Spur Gears): 56" Max. / 6" Min. Psdpfxertrzds Afusgt Distance Between Nose of Brake Spindle and Nose of Drive Spindle (for spur gears): 36-1/2" Max. / 0" Min. Offset of Drive Spindle Either Above or Below Centerline of Brake Spindle: 10" Range of Shaft Angles: 0 - 360 Degrees Maximum Diameter of Gear: 90" Diameter of Face Plate: 54" Outboard Bearing: 3" Diameter Hole Spindles: RPM of Drive Spindle Pulley Set No. 1: 100 - 400 RPM of Drive Spindle Pulley Set No. 2: 250 - 600 Diameter of Taper Hole (large end): 6" Taper Per Foot: 3/4" Depth of Taper: 8" Hole Through Spindle: 5-1/2" Net Weight of Machine: 20,000# Net Weight of Machine W/Outboard Support and Bed Plate: 24,000#

Condition: good (used), Hydraulic press, two-column press, oil hydraulic press -Pulley pressing force: 65 tons -Hydraulic unit: max. 330 bar -Clamping table: 440 x 250 mm Pgedpfx Ajb I Dqaofuot -Max. insertion height: 295 mm -Max. width: 300 mm -Max. stroke: 220 mm -with safety cage -Max. feed rate: 3 mm/sec -Retraction speed: 6 mm/sec -Dimensions: 1680/500/H2300 mm -Weight: 980 kg

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Manufacturer Scherer Feinbau Type VDZ 220 DS Year of manufacture 2010 Control Siemens Technical data Chuck diameter mm 315 Drive power (100%ED) kW 37.7 Torque (100%ED) Nm 300 Max. speed rpm 5500 X-stroke mm 625 Y-stroke mm +100/-80 Z-stroke mm 250 Tool system VDI 30+40 Pgjdpsvu R I Nsfx Afujt Spindle interface A6

Condition: used, Year of construction: 2002, Technical details: turning diameter: 200 mm turning height: 120 mm weight of the machine ca.: 18 t Pgsdpfx Asr Dwpmjfust Available from 01.08.2024 *

Condition: used, Year of construction: 2014, 2 Vertical Turning Machines (Tandem) Manufacturer: EMAG Model: VL 3 Year: 2014 Control: Fanuc 31/32i TECHNICAL SPECIFICATIONS FOR THE VL3 MACHINE (Subject to errors and omissions) WORKING AREA Chuck diameter: 170 mm Swing diameter: 210 mm X-travel: 400 mm Z-travel: 200 mm Loading time (depending on clamping device): 2–4 sec MAIN SPINDLE Spindle flange to DIN 55026, size 5 Spindle bearing diameter (front): 80 mm Maximum spindle speed: 7,500 rpm MAIN DRIVE AC asynchronous motor Power at 40/100% duty cycle: 25/16 kW Full power from spindle speed (100% ED): 1,800 rpm Torque at 40/100% duty cycle: 134/85 Nm FEED DRIVE Rapid traverse speed, X axis: 60 m/min Rapid traverse speed, Z axis: 30 m/min Feed force (X and Z): 5 kN Ball screw diameter (X/Z): 40 mm TURRET Cylinder shank mount DIN 69880, 12 positions Shank diameter: 40 mm ELECTRICAL EQUIPMENT according to VDE 0113 Operating voltage: 400 V Control voltage – DC: 24 V; AC: 230 V Frequency: 50 Hz Connected load without/with live tool: 28 / 31 kW Supply line protection: 50 A DIMENSIONS & WEIGHT Length: 2,500 mm Length incl. chip conveyor: 3,600 mm Width: 1,900 mm Height: 2,300 mm Weight: approx. 5,500 kg Linear roller guides in the X-axis located outside the machining area. GANTRY SLIDE INCLUDING SLIDE GUIDE Motor spindle mounting AC synchronous drives for X and Z axes Encapsulated linear measuring systems Resolution all longitudinal axes: 0.001 mm (absolute measurement) Rapid traverse: X axis 60 m/min, Z axis 30 m/min 1 MOTOR SPINDLE size 5 DIN 55026 Max. speed: 7,500 rpm Power at 40/100% duty cycle: 25/16 kW Torque at 40/100% duty cycle: 134/85 Nm HYDRAULIC UNIT with gear pump. CENTRALIZED OIL SUPPLY for lubrication of ball screws and roller guides COOLING UNIT Controls the machine’s thermal balance. Keeps motor spindle, turret, and control cabinet at ambient temperature. TOOL CARRIER SYSTEM 1 12-STATION TURRET Psdoytn Emspfx Afujgt with mounting holes Ø40 DIN 69880 Shortest indexing time via electric motor drive Cooled for consistent accuracy Internal coolant supply to tool in cut position WORKPIECE STORAGE & TRANSPORT SYSTEM 1 CIRCULATING WORKPIECE FEEDER Storage capacity: 27 workpieces (Ø 30–85 mm), or 18 workpieces (Ø 30–130 mm), Max. workpiece height: 100 mm Loading height: 1020 mm Chain-type accumulating conveyor with transport prisms Workpieces are NC-positioned for clamping device take-over. The pick-up spindle retrieves blanks from the conversion-free storage and conveyor system. COOLANT AND CHIP REMOVAL SYSTEM 1 COOLANT SUPPLY with integrated coolant tank, capacity approx. 300 l, coolant filter Coolant pump delivery rate: approx. 80 l/min at 7 bar 1 CHIP CONVEYOR Discharge height: 1,250 mm, hinge belt design 1 EMULSION MIST EXTRACTION from the machining area ADDITIONAL EQUIPMENT AND EXPANSIONS WORKPIECE STORAGE & TRANSPORT SYSTEM 1 INTERFACE FOR EMAG TRANSFER AND FLIP UNIT OP20 COOLANT AND CHIP REMOVAL SYSTEM 1 FLUSHING NOZZLES: 2x in working area, 1x in machine base HYDRAULICS & PNEUMATICS 1 MAINTENANCE UNIT FOR COMPRESSED AIR with mounting 1 PICK-UP DEVICE BLOW-OFF (2 nozzles, WITHOUT maintenance unit – see maintenance unit compressed air)