Condition: like new (used), Year of construction: 2019, functionality: fully functional, carrying capacity per cantilever arm: 725 kg, load capacity: 8,700 kg, shelf height: 8,700 mm, total length: 4,700 mm, total width: 2,600 mm, total height: 8,700 mm, axle spacing: 1,500 mm, throat depth: 1,200 mm, load capacity per storage section: 2,900 kg, Equipment: double-sided, Cantilever racking in good condition Psdpfx Afow Uf Emeusgt

Condition: good (used), Approx. 1,400 shelving units, Tixit boltless shelving, shelf widths of 1.30m and 1m, depth 0.60m, frame height 2.40m and 4.80m – used – : Price ex location (net), dismantled, packed, and loaded. Frame height: Approx. 2.40m with 5 shelves: Min. 20 units: €79 / unit Min. 100 units: €69 / unit Approx. 4.80m with 10 shelves: Min. 20 units: €149 / unit Min. 100 units: €129 / unit Manufacturer: Tixit Type: Boltless system Year of manufacture: unknown Pgsdsxtapvepfx Afuot Frame height: approx. 2.40m and 4.80m Frame width: approx. 3cm Shelf load capacity: 100kg Unit bay load: unknown, but since the material comes from a multi-story installation, bay load should be relatively high. Bay width / shelf width: 1.30m and 1m, mainly 1.30m Bay depth / shelf depth: 60cm Shelf height: approx. 3cm Side frames: open Available: approx. 800 frames at height 4.80m or approx. 1,600 frames at height 2.40m Condition: Good, as the material comes from a multi-story installation Available: Immediately Location: Warehouse in Niedernberg, near Aschaffenburg

Condition: used, total length: 1,220 mm, total width: 400 mm, total height: 2,000 mm, load capacity per storage section: 150 kg, We are offering used shelving systems for sale here. TECHNICAL DATA Manufacturer: Nedocn Type: Shelf N Frame height: 2,000 mm (new product) Shelf: 1,220 x 400 mm (used product) Load capacity per shelf: 150 kg Number of levels: 5 Plug-in assembly Cross brace Graduated prices net per piece, plus VAT: Base units: 1 - 5 units: €41.50 net per piece 6 - 20 units: €39.43 net per piece 21 - 50 units: €37.35 net per piece Pgjdjy Dgglopfx Afuet 51 units and up: €35.28 net per piece Add-on units: 1 - 5 units: €29.50 net per piece 6 - 20 units: €28.03 net per piece 21 - 50 units: €26.55 net per piece 51 units and up: €25.08 net per piece PROJECT DESIGN Our sales team will be happy to create a non-binding offer tailored to your specific needs. TRANSPORT & ASSEMBLY We will gladly assist you with the transport and assembly of the goods. TERMS OF PAYMENT Payment terms will be agreed upon in the event of an order. The price is quoted as a unit price/net price or as stated in the product description (plus VAT). You will, of course, receive an invoice with VAT shown. ABOUT US DLK, based in Nordhorn, trades in new and used products in the areas of warehouse logistics, material handling technology, storage platforms, textile storage, and machines for the retail, industrial, and craft sectors. We continuously offer interesting used products from various manufacturers/brands at attractive prices. If you have any questions, please do not hesitate to contact us. Win-win – The success factors of DLK – Warehouse technology | Levelmaker® | Logistics | Solutions

Condition: used, We offer used trusses for sale here. TECHNICAL DATA Clear span: 3,600 mm Box profile: 125 x 50 mm - Load capacity per truss pair: 3,700 kg Box profile: 130 x 50 mm - Load capacity per truss pair: 3,800 kg Color: Daffodil Yellow Condition: used QUANTITY-BASED PRICING per piece - Stock quantity: 2000 pieces 1 - 50 pieces: €17.50 net 51 - 100 pieces: €16.00 net 101 - 250 pieces: €14.50 net 251 pieces and up: €13.00 net PROJECT PLANNING Our sales team will be happy to prepare a non-binding offer tailored to your requirements. TRANSPORT & INSTALLATION We will gladly assist you with the transport and installation of the goods. TERMS OF PAYMENT Pgodpfx Asy H D Eksfust The terms of payment will be agreed upon in the event of an order. The price is understood to be the unit price/net price or as stated in the product description (plus VAT). You will, of course, receive an invoice with VAT shown. ABOUT US DLK, based in Nordhorn, trades in new and used products from the fields of warehouse logistics, material handling technology, storage platforms, textile storage, and machines for the retail, industrial, and craft sectors. We continuously offer interesting used products from various manufacturers/brands at attractive prices. If you have any questions, please do not hesitate to contact us. Win-win – The success factors of DLK – Warehouse technology | Levelmaker® | Logistics | Solutions

Condition: used, This package includes: 1 x Crossbeam, 3,600 mm (yellow) 2 x Locking pins Approximately 170 uprights and 800 crossbeams are available for this system. Please contact us for more information. Manufacturer: Jungheinrich Condition: used, good condition Shelf depth: 1,100 mm Crossbeam length: 3,600 mm Load capacity per shelf: 3,200 kg Pedpfx Afjyu Rbasuegt Accessories such as: Floor anchoring Connectors Load warning signs Impact protection Guard rails Grid decking Rear panel grid Deep shelf supports Barrier railings and much more... Just ask us! Sales & Delivery Conditions (B2B) - Prices & Logistics: All prices are quoted net from our location. Express delivery via our own fleet is possible after individual agreement. - Offer Status: All offers are subject to change and without obligation. We reserve the right to sell items prior to confirmation. - Retention of Title: The goods remain our unrestricted property until full payment is received (no right of disposal or processing). - Warranty: Exclusive distribution to commercial businesses (§ 14 BGB). For used and IIa goods, liability for defects in materials is excluded. For new goods, the respective manufacturer's warranties apply.

Condition: good (used), Approx. 200 units of shelving dividers (freestanding) for shelving systems with 40cm shelf depth, SSI Schäfer – used: Pgodekhfv Ropfx Afust Prices per unit, ex warehouse: €2.00 (net), disassembled, packaged, and loaded! Manufacturer: SSI Schäfer Type: TRF 44 10 Year of manufacture: unknown With plastic core For shelf depth: 40cm Height of divider: 100mm New price: approx. €5.00 Condition: good Available: immediately Location: Warehouse Frankenberg (Saxony)

Condition: good (used), Approx. 452 Meta shelving units, 1m x 0.40m / 0.60m - used: Price per shelving unit: €8.00 (net)! Pjdeki Txcopfx Afujgt Minimum order quantity: 50 pieces Manufacturer: Meta Type: Meta Clip Year of manufacture: unknown Depth: 60cm Width 1m = approx. 52 pieces Depth: 40cm Width 1m = approx. 400 pieces The shelving units show some wear and tear at the mounting points for the shelf supports, and some are slightly bent. However, a tap with a hammer should be sufficient to allow them to be reattached without any problems. Height: approx. 4cm Load capacity: unknown – should be able to support at least 100kg Condition: good Available: immediately Location: Frankenberg / Saxony

Condition: good (used), Approx. 870 shelving units SSI Schäfer R3000, shelving units approx. 1m x 0.40m - used: Price per unit: only €8.50 (net), packaged and loaded on-site! Minimum order quantity: 1 pallet (approx. 180 units) Manufacturer: SSI Schäfer Pgodpfjki T Akex Afuet Type: R3000 Year of manufacture: unknown Dimensions: approx. 1m x 0.40m 870 shelving units Load capacity per shelf: min. 100 kg Condition: good Available: immediately Location: Frankenberg / Saxony

Condition: good (used), approx. 800 pieces of longitudinal bracing for R8000, for longitudinal bracing as an alternative to cross bracing for bay length: 994mm - second-hand - : Price per piece ex location: only 3.- € (net)! 4 pieces are required per bay! Pjdpfx Asryv I Hofuegt Manufacturer: SSI Schäfer Type: LV 8000 Year of manufacture: unknown Bay length: 994 (mm) Shelf height: 30 (mm) New price per piece: approx. 12.-€ (net) Longitudinal bracing Sheet steel, painted light silver. For longitudinal bracing as an alternative to cross bracing, if cross bracing interferes with through-storage in double shelving or if both sides are to be served in single shelving. To ensure subsequent height adjustability, the frame spacing must be at least 30 mm for double shelving. In each bay of a row of shelves, the bottom and top shelf must be fitted with 2 longitudinal braces (for shelf heights up to 2967 mm). The positive connection with the upright guarantees high rigidity. Field load capacity on request! Condition: good, slight rust film in places Available: immediately Location: Frankenberg warehouse

Condition: like new (used), 600 linear meters of STOW pallet racking, like new 🧰 Product Features • Color: Frame galvanized / Beam yellow • Load capacity: o Field load: 12,000 kg o Shelf load: 2,400 kg per level/evenly distributed load + 216 frames, height approx. 5500 mm, depth 1100 mm + 1290 beams, 2700 mm length, 2400 kg load capacity/with evenly distributed load + 2580 safety locking devices + 864 concrete anchors M12 x 110 mm for fastening 💰 Price / €48,100 net, excluding VAT Matching wire mesh decking available upon request • Other heights and quantities available upon request • Quantity discount: available upon request • Shipping costs: available upon request, throughout Europe • Delivery time: Available immediately • Inspection and pickup: possible at any time by appointment We constantly have over 5000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, specifications, and prices, as well as prior sale! See our terms and conditions, all prices excluding VAT, ex warehouse.) Lenox Trading – Top warehouse technology & used & new heavy-duty racking Description: Pgodpfjwnf Hrsx Afuot Are you looking for high-quality warehouse racking to buy? With approximately 100 employees, Lenox Trading is one of the largest dealers for new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ PROMPTLY AVAILABLE: • Over 10,000 linear meters of racking available for immediate delivery • 20,000 m² of storage platforms & steel structure platforms immediately available • 30–50 semi-trailer loads of goods turnover weekly for maximum selection 📦 OUR RANGE (BUY CHEAPLY ONLINE): Whether pallet racking, heavy-duty racking, high-bay racking, shelving racking, tire racking, or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling, and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer Warehouse Technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, Jungheinrich heavy-duty racking) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi Cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND BUSINESS: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a complete all-round package: 1. Flat-rate purchase: Purchase of merchandise, equipment & complete warehouse stocks including thorough clearance. 2. Commission auction: Conducting auctions on behalf of clients. Our full-service by our own employees: Cataloging, office preparation, inspection, goods delivery, logistics, dismantling, and thorough handover. Whether you have become aware of us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking systems – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: used, We offer used trusses here. TECHNICAL DATA Clear span: 3,700 mm Box profile: 160 x 50 mm Load capacity: 3,900 kg per pair of trusses Color: Daffodil yellow Condition: used PRICE BREAKDOWN per unit – Stock quantity: 650 units 1 – 50 units: €18.00 net 51 – 100 units: €16.50 net 101 – 250 units: €15.00 net 251 units and above: €13.50 net YOUR CONTACT PERSONS AT OUR COMPANY Oliver Kopp Rainer Nürenberg Tanja Henkelmann TRANSPORT & ASSEMBLY We will gladly assist you with the transport and assembly of the goods. This item is available for collection. Delivery or shipping is possible for an additional fee. The additional costs depend on the delivery location and the scope of the shipment and can be requested individually from us. Pgodpsv U Urlofx Afuot PROJECT PLANNING Our sales team will be happy to prepare a non-binding offer tailored to your requirements. TRANSPORT & ASSEMBLY We will gladly assist you with the transport and assembly of the goods. TERMS OF PAYMENT Payment terms will be agreed upon in the event of an order. The price is quoted as a unit price/net price or as stated in the product description (plus VAT). You will, of course, receive an invoice with VAT shown separately. ABOUT US DLK in Nordhorn trades in new and used products in the areas of warehouse logistics, conveying technology, storage platforms, textile storage, as well as machines for retail, industry and trades. We continuously offer interesting used products from various manufacturers/brands at attractive prices. If you have any questions, please do not hesitate to contact us. Four wins – The success factors of DLK – warehouse technology | Levelmaker® | logistics | solutions

Condition: good (used), Year of construction: 2013, Approx. 200 bays of wide-span shelving / compartment shelving, SSI Schäfer, with steel shelves – used – : Price per bay ex location: Now only €99 instead of €225 (net), dismantled, packed, and loaded! Additional single beams: €5 (net) / each Price per bay without steel shelves ex location: €225 (net), dismantled, packed, and loaded! Additional single beams: €5 (net) / each Manufacturer: SSI Schäfer Type: Carton flow rack (converted) Year of manufacture: 2013 Each bay with 3 shelf levels! Frame width: approx. 6 cm Frame depth: approx. 85 cm Beam height: approx. 6 cm Steel shelf dimensions: Depth: approx. 76.5 cm, width: approx. 30 cm, height: approx. 2 cm, qty approx. 130 pcs Depth: approx. 76.5 cm, width: approx. 20 cm, height: approx. 2 cm, qty approx. 76 pcs Bracing beam: height approx. 6.5 cm Available frame heights: Rack height: approx. 2.20 m Depth: 85 cm No. of frames: 288 pcs Pgsdpovxh Arsfx Afujt Rack height: approx. 2.50 m Depth: 85 cm No. of frames: approx. 145 pcs Available bay widths: Clear bay width: 1.80 m Beam with edge for steel shelves: 180 cm – 58 pcs Beam without edge (like a pallet rack – also ideal for chipboard panels): 180 cm – 344 pcs Clear bay width: approx. 2.20 m Beam with edge for steel shelves: 220 cm – 7 pcs Beam without edge (like a pallet rack – also ideal for chipboard panels): 220 cm – 237 pcs Condition: good Available: immediately Location: Warehouse Frankenberg / Saxony

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. Psdemhhyaspfx Afuegt The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 4,200 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright center distance (4,000 mm shelf length) Fastening material (screws, nuts and washers) - (*Delivery or collection in approx. 1 - 2 weeks) - (*No damage to paintwork!) - (*No damaged components!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Net price: € 1,990.00 plus VAT. Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 4,200 mm - Load capacity per upright 2,200 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Pgodpfxemhhyps Afuet Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. Delivery can be made in approx. 1 - 2 weeks after receipt of order. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The surface must be concrete, level and suitable for dowels and must be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any necessary official approvals are in place. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Pgjdjmhh Anepfx Afust Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) Pjdpfxjmhh Dze Afusgt - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Year of construction: 2021, condition: new, Cantilever rack, one-sided, 2.60m height, 1m arms, 600kg per arm, hot-dip galvanized - new -: Price: € 1,485,- (net) transport within Germany (excluding islands)!430,-€(netto) Of course, you can also build longer or shorter shelving units from them by omitting or buying additional frames (or by using different center distances), this example with 4 frames is only the most common shelving solution! A cantilever racking system, hot-dip galvanized, consisting of: German brand manufacturer, new goods Description: - Shelf uprights on one side 2,600 mm high, hot-dip galvanized - Foot and arm depth 1000 mm - each with 3 height-adjustable shelf arms - Load capacity at a load center of 500 mm - 600 kg per arm / 1,800 kg per stand with 4 stands per arm level 4 x 600 kg = 2,400 kg Profiles: Frame (stand): IPE 140, arms IPE 80 with longitudinal and diagonal bracing e = 1300 mm, the standard is 1.30 m - if you do not have any deviating information, we will deliver the rack with a center distance of 1.30 m. Other center distances possible e.g. 1m, 1.25m for a small surcharge also 1.50m or special dimensions! As a standard delivery, the length of a row of shelves with 4 uprights is approx. 4000 mm. Pedsd Epfvjpfx Afuegt Delivery with all screws and nuts, without ground anchors. Other configurations (frame height, arm lengths, arm types etc.) can be selected! Please contact us!

Year of construction: 2021, condition: new, Cantilever rack, one-sided, 3m height, 1.20m arms, 500kg per arm - new -: Price ex location including loading! 1 shelf unit with 4 stands 1.833.- € (net)! Price for transport within Germany (excluding islands): € 500 (net)! Pgedpfxoddmpvs Afuot Of course, you can also build longer or shorter shelving units from them by omitting or buying additional frames (or by using different center distances), this example with 4 frames is only the most common shelving solution! A cantilever racking system, hot-dip galvanized, consisting of: Shelf uprights on one side approx. 3,000 mm high, hot-dip galvanized, IPE 160 Leg and arm depth 1200 mm with 3 height-adjustable shelf arms each Load capacity at a load center of 600mm 500 kg per arm / 2250 kg per stand with 4 uprights per arm level 4 x 500 kg = 2,000 kg, arms IPE 80, with longitudinal and diagonal bracing e = 1300 mm, the standard is 1.30 m - so if you do not have any deviating information, we will deliver the rack with a center distance of 1.30 m. Other center distances possible e.g. 1m, 1.25m for a small surcharge also 1.50m or special dimensions! As a standard delivery, the length of a row of shelves with 4 uprights is approx. 4000 mm. Delivery with all screws and nuts, without ground anchors. Other configurations (frame height, arm lengths, arm types etc.) can be selected! Please contact us!

Year of construction: 2021, condition: new, Cantilever rack, double-sided, 5.18m height, 1.20m arms, 500kg per arm - NEW -: Price ex location including loading! 1 shelf unit with 4 stands € 3.875,- (net)! Price for transport within Germany (excluding islands): € 550,- (net)! Of course, you can also build longer or shorter shelving units from them by omitting or buying additional frames (or by using different center distances), this example with 4 frames is only the most common shelving solution! A cantilever racking system, hot-dip galvanized, consisting of: 4 uprights, double-sided, approx. 5.18 m high, hot-dip galvanized IPE 180/80 each with 2x3 adjustable. Arms 1.20 m, 500 kg load capacity per arm with bandages approx. 1.30 m Podpfjddmq Tox Afujgt Shelf uprights on both sides approx. 5180mm high, hot-dip galvanized Leg and arm depth 1200 mm with 3 height-adjustable shelf arms each Load capacity with a load center of 600 mm 500 kg per arm / 2600 kg per stand side with longitudinal and diagonal bracing e = 1300 mm, the standard is 1.30 m - so if you do not have any deviating information, we will deliver the rack with a center distance of 1.30 m. Other center distances possible e.g. 1m, 1.25m for a small surcharge also 1.50m or special dimensions! As a standard delivery, the length of a row of shelves with 4 uprights is approx. 4000 mm. Delivery with all screws and nuts, without ground anchors. Other configurations (frame height, arm lengths, arm types etc.) can be selected! Please contact us!

Year of construction: 2021, condition: new, The prices mentioned in this advertisement are valid as of mid-2021. Due to the current international situation, the prices of steel and transportation are increasing almost daily. The availability of steel as a raw material is limited and currently unpredictable. Therefore, we kindly ask you to inquire about the current prices and availability! We will be happy to provide you with an up-to-date offer! Cantilever rack, double-sided, 4.16m height, 1.20m arms, 500kg per arm - NEW -: Price ex works including loading! Pgedpfx Asddmr Nsfuet 1 rack unit with 4 uprights €2,395 (net)! Price for transport within Germany (excluding islands): €425 (net)! Of course, you can also create longer or shorter rack units by omitting or adding more frames (or by using different bay widths); this example with 4 frames is just the most common rack solution! A cantilever rack system, hot-dip galvanized, consisting of: 4 rack uprights, double-sided, approx. 4.16m high, hot-dip galvanized IPE 160 / 80 with 2x3 adjustable arms of 1.20 m, 500kg load capacity per arm with cross braces approx. 1.30 m Rack uprights, double-sided, approx. 4160mm high, hot-dip galvanized Base and arm depth 1200 mm with 3 height-adjustable rack arms each Load capacity with load center at 600 mm 500 kg per arm / 2250kg per upright side with longitudinal and diagonal braces e = 1300mm, standard is 1.30m. Other standard lengths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! A small surcharge will be added to the stated price for lengths from 1.50m! Special sizes (different bay widths) are also available upon request, but they will also incur an additional cost and have a longer delivery time as they need to be manufactured separately! If you do not specify any deviating bay widths, we will deliver the rack with a bay width of 1.30m. In this case, the length of a rack row with 4 uprights (3 bays) is approx. 4m. Delivery with all screws and nuts (shipping within Germany via parcel directly from Würth), without floor anchors.

Condition: good (used), total length: 1,000 mm, total width: 600 mm, total height: 2,500 mm, load capacity per storage section: 150 kg, TECHNICAL DATA • Manufacturer: META • Frame height: 2,500 mm Pedpfx Afeuk E Thousgt • Shelf width: 1,000 mm • Frame depth: 600 mm • Shelf load capacity: 150 kg • Number of shelves per bay: 6 • Surface: galvanized • Plug-in assembly • Condition: used Large quantities available immediately. Graduated prices net per piece plus VAT: Basic bay: 1 - 5 bays: €54.00 6 - 20 bays: €52.38 21 - 50 bays: €50.76 From 51 bays: €49.14 Add-on bays: 1 - 10 bays: €39.00 11 - 25 bays: €37.83 26 - 75 bays: €36.73 From 76 bays: €35.69 Ex works Nordhorn. YOUR CONTACTS: • Tanja Henkelmann • Rainer Nürenberg • Oliver Kopp TRANSPORT & ASSEMBLY We will be happy to assist you with the transport and assembly of the goods. This item is available for collection. Delivery or shipment is possible for an additional charge. The additional costs depend on the delivery location and the scope of the shipment and can be requested individually from us. PAYMENT TERMS Payment terms will be agreed upon in the event of an order. The price is understood to be the unit price/net price or as specified in the product description (plus VAT). You will, of course, receive an invoice with VAT shown. ABOUT US DLK in Nordhorn deals in new and used products in the areas of warehouse logistics, conveyor technology, storage platforms, textile storage, and machines for retail, industry, and trades. We offer you attractive used offers from various manufacturers/brands on an ongoing basis. If you have any questions, please do not hesitate to contact us. Four wins – The success factors of DLK – Storage technology | Levelmaker® | Logistics | Solutions

Condition: good (used), Year of construction: 2019, approx. 554 shelves for racking system / Berger, type Bert, 1m and 1.30m x 0.50m, 150kg, various - second-hand - : Price per shelf: 9.-€ (net)! Minimum purchase: 50 pieces Manufacturer: Regalwerk / Berger Pgsdpfjrdgawex Afuet Type: Bert Year of construction: approx. 2019 Depth: 49cm = bay depth: 50cm Width: approx. 1.28m (bay width 1.30m) = 434 pieces Width 1m = approx. 120 pieces Height: approx. 4cm Load capacity: 150kg Per pallet approx. 100 - 120 pieces Condition: good Available: immediately Location: Frankenberg / Saxony Frankenberg / Saxony

Condition: good (used), Compartment divider, SSI Schäfer R3000, TRF 4510 for shelves 0.50m deep - second-hand - : = Price per piece ex location: 2.-€ (net), dismantled, packed and loaded! Minimum purchase: 100 pieces Pjdpfeqmnc Usx Afusgt Manufacturer: SSI Schäfer Series: R3000 Type: TRF 4510 Year of manufacture: unknown For shelves Dimensions: approx. 1m x 0.50m For shelves 40mm high Version with plastic plugs Partition height: 10cm Condition: good Available: from approx. beginning of December 2023 Location: Munich

Year of construction: 2021, condition: new, Cantilever rack, one-sided, 6.30m height, 1.20m arms, 500kg per arm - new -: Price ex location including loading! 1 shelf unit with 4 stands € 4.115 (net)! Transport costs within Germany (excluding islands): € 490 (net)! Of course, you can also build longer or shorter shelving units from them by omitting or buying additional frames (or by using different center distances), this example with 4 frames is only the most common shelving solution! A cantilever racking system, hot-dip galvanized, consisting of: Shelf uprights on one side approx. 6,300 mm high, hot-dip galvanized Leg and arm depth 1200 mm with 3 height-adjustable shelf arms each Load capacity with a load center of 600 mm 500 kg per arm / 4,000 kg per stand with 4 stands per arm level 4 x 500kg = 2,000 kg Profiles: frame: IPE220, arms: IPE 80 with longitudinal and diagonal bracing e = 1300 mm, the standard is 1.30 m - so if you do not have any deviating information, we will deliver the rack with a center distance of 1.30 m. Other center distances possible e.g. 1m, 1.25m for a small surcharge also 1.50m or special dimensions! Pjdpfx Ajfivg Rofuegt As a standard delivery, the length of a row of shelves with 4 uprights is approx. 4000 mm. Delivery with all screws and nuts, without ground anchors. Other configurations (frame height, arm lengths, arm types etc.) can be selected! Please contact us!

Condition: used, Pallet racking system by Voest, approx. 55 linear meters, used 🧰 Product features • Manufacturer: Voest • Color: green • Condition: used, see photos • Frames: 13 pcs., pre-assembled, 400 x 110 cm • Beams: 48 pcs., with a clear span of 426 cm, profile 150 x 50 mm • Safety: 96 pcs., galvanized safety pins • Fasteners: 52 pcs., Hilti concrete anchors • Load capacity: 1,600 kg per level • Field load: 8,000 kg • Load capacity label: included Over 1,000 linear meters in stock Frame heights up to 10 meters Available depths: 75 cm and 110 cm Available beam lengths: 426 cm and 566 cm Matching depth beams, insert gratings and insert shelves available upon request 💰 Price €2,250 net, excluding VAT • Quantity discounts: upon request • Shipping costs: Europe-wide, upon request • Delivery time: immediately available • Inspection and collection: possible at any time by appointment • Product number: P10433 Constantly over 5,000 linear meters of pallet racking systems from numerous manufacturers in stock (Subject to changes and errors in technical data, information and prices, as well as prior sale! See our general terms and conditions, all prices excl. VAT, ex warehouse.) Lenox Trading – Top storage technology & heavy-duty racking systems, used & new Description: Are you looking for high-quality storage racking systems to buy? With approximately 100 employees, Lenox Trading is one of the largest dealers for new and used storage technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking systems immediately available • 20,000 m² of mezzanine floors & steel platform structures immediately available • 30–50 semi-trailer loads of goods turnover weekly for maximum selection 📦 OUR RANGE (BUY CHEAP ONLINE): Pgjdpfx Afjzg U Adjuot Whether pallet racking, heavy-duty racking, high-bay racking, shelving systems, tire racks or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer Lagertechnik, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racks (Elvedi cantilever racks, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND PILLAR: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a complete all-round package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete stock including thorough clearance. 2. Commission auction: Conducting auctions on commission. Our full-service provided by our own employees: cataloging, office preparation, inspection, goods handover, logistics, dismantling and thorough handover. Whether you became aware of us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking systems – we guarantee the best conditions. Contact us for a non-binding offer!