Vertical panel saws Striebig 1993

Striebig

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, saw blade diameter: 250 mm, cutting length (max.): 4,600 mm, cutting height (max.): 2,070 mm, cutting depth: 60 mm, saw blade bore: 30 mm, Submission of a bid obligates you to collect the item by the deadline of 27.02.2026! The machine was overhauled in the workshop, functionally tested, and cleaned in 2025! TECHNICAL DETAILS Cutting length: 4,600 mm Vertical cutting height: 2,070 mm Horizontal cutting height: 1,958 mm Cutting depth: 60 mm Saw motor power: 3.9 kW Saw blade diameter: ∅ 250 mm Saw blade bore: 30 mm Saw blade speed: 5,250 rpm Extraction port: ∅ 100 mm Strip gauge: 600 mm MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 5,826 x 2,838 x 1,428 mm Weight: approx. 910 kg Connection value/power supply: 4.8 kW / 3 ~ 400 V | 50 Hz Cpodpfx Afjyfnurjnsu EQUIPMENT Electromagnetic motor brake Mechanically braked support rollers

Condition: new, axle configuration: 3 axles, Year of construction: 2026, We have all Europe documents!      We can delivery the trailers with FOB-EXW-CPT-CFR-CIF      Cpsdpfxjqx Nfge Afnou If you have an interest please contact with us 

Condition: ready for operation (used), Year of construction: 2002, Panel saw manufactured in 2002. The STRIEBIG Standard TRK 5220A is an older model that has not been serviced recently, as the decision was made to purchase a new saw. Consider the opportunity to buy this STRIEBIG Standard TRK 5220A panel saw. Contact us for further details. Cpedpfx Aoyg Hc Rjfnsu • Condition: Old; owner will not service further • Reason for sale: Replacing with a new saw due to age • Inspection: Detailed condition unknown; professional assessment recommended

Condition: ready for operation (used), Cutting length: 4300mm, cutting height: 2200mm, cutting depth: 80mm, saw blade diameter: 30mm, bore: 30mm, speed: 4000rpm, machine dimensions X/Y/Z: approx. 5400mm/2900mm/1700mm, weight: approx. 1100kg. On site inspection is possible. Cedsyg Nuvjpfx Afnjpu

Condition: ready for operation (used), Technical characteristics Power and Motors Cpedeucir Rjpfx Afnju Voltage: 400 V Pluging: Three-phased Power: 4,4 Kw Overall dimensions Lenght: 6620 mm Width: 3035 mm Height: 1741 mm Weight: 1200 Kg

Condition: used, Year of construction: 2007, Max. cutting height horizontal: 2100 mm; max. cutting height vertical: 2240 mm; max. processing thickness: 80 mm; saw blade diameter: 300 mm; saw blade bore: 30 mm; lower support: fixed rollers; material support: alternating wooden slats; small part support: yes; measuring system: horizontal/vertical digital; saw head tilting: pneumatic; saw feed: manual; mounting: free-standing; extraction: external extraction; scoring unit: with saw blade; weight approx.: 1100 kg; motor power: 5.5 kW; extraction diameter: 140 mm. Storage location: Codoygm Dnjpfx Afnjpu

Condition: good (used), Code: 0655 Brand: STRIEBIG - SWITZERLAND Model: STANDARD III 6220 - CE Standard Manual vertical panel saw for cutting wood panels, plywood, furniture, composite materials, plasterboard, sandwich panels, plastics, aluminium and various materials - CE Standard Technical characteristics: Machine frame with 40 welded cross beams and therefore very rigid Support on 17 rollers and three brake pedals for sliding panels Extremely stable motor column Compact vibration-free saw unit Integrated strip stop for repetitive cuts Sturdy pressure pad for material clamping and perfect suction on the front side Easy rotation of blade unit Csdoyctpvopfx Afnjpu Support for small panels Reference stops Technical data: Cutting dimensions mm 5300 x 2200 Horizontal height cutting mm 2100 Cutting depth mm 80 Blade diameter mm 300 F 30 Blade speed 4750 rpm Motor power Kw 5,5 ( Hp 7,5) Installed power Kw 7 Suction inlet diameter mm 125 Overall dimensions of assembled machine mm 6665 x 3015 x 1810 h Weight kg 840 Overall dimensions for transport : Frame mm 6500 x 1300 x 2550 h - Weight kg 420 - Beam mm 3050 x 870 x 720 h - Weight kg 420

Condition: good (used), Year of construction: 2012, functionality: fully functional, CNC machining center with edge banding for shaped workpieces Working dimensions for Y1 axis: X axis: 4,300 mm X axis pendulum operation: 1,620 mm Y axis: 1,320 mm Working dimensions for Y2 axis (edge processing): X axis: 3,300 mm X axis pendulum operation: 600 mm Y axis: 1,240 mm Work table: 8 ATS workpiece supports with 3 vacuum cups each 8 rear workpiece stops, program-controlled lowering, each mounted in one support 8 workpiece stops, 670 mm from rear, each mounted in one support 2 + 2 lateral workpiece stops 4 removable center stops 6 lift rails, pneumatically program-controlled lowering, for positioning heavy workpieces Automatic positioning of workpiece supports and vacuum cups via EPS (Electronic Positioning System) Automatic central lubrication Vacuum system divided into 2 separate work zones along the X axis Vacuum assist system for clamping templates Chip conveyor integrated into the machine table Vacuum pump 90 cbm/h Processing head equipment: Mounted on Z2 axis Drilling head BH 26 2L with: 16 vertical drilling spindles, individually selectable 2+2 horizontal drilling spindles in X direction 2+2 horizontal drilling spindles in Y direction Grooving saw, diameter 120 mm, fixed in X direction Grooving saw, diameter 120 mm, fixed in Y direction Milling spindle 13.2 kW (11 kW in S1 operation), HSK 63 F Mounted on Z1 axis Speed range 1,000 – 24,000 rpm Clockwise and counter-clockwise rotation C axis 360 degrees for adapter units Cleaning nozzle for cleaning the milled edge before the edge banding process Tool magazine for 16 tools Edge banding unit for workpieces up to 60 mm thickness Edge banding unit CNC controlled, with 360 degree endless rotation Glue application for hotmelt adhesive Double pressure roller, interchangeable and can be switched off Heating lamp for preheating edge band material End trim unit to cut the edge band material at an 8-degree angle to the workpiece edge using circular saw blade Technical data: Plastic edge thickness 0.4 – 3 mm (*) Solid wood edge thickness 0.4 – 2 mm (*) (Best results achieved using wood edges with primer from 0.4 – 1.2 mm) Max. edge height 64 mm Panel thickness min. 14 mm, max. 60 mm Min. inside radius 18 mm for edge thickness less than 1 mm Cpsdpfjxraimox Afnju Min. inside radius 30 mm for edge thickness 2 mm Min. panel size for edge banding: 300 x 300 mm Min. size for edge banding of internal cutouts: 350 mm, with plastic edge max. 1 mm thickness and max. panel thickness 18 mm Edge magazine for 2 rolls, positioned outside the machine—this solution limits pendulum processing. Roll diameter for edge material: 800 mm Safety equipment: * Safety mats in front of the machine * Safety fence on the right with access door Without tools Control system: PC control with BIESSE WORKS ADVANCED Restart after emergency stop BIESSE WORKS office version Units: - Flush/radius trimming unit - Combination profile/flat scraper unit - Sawing unit

Condition: used, Year of construction: 1992, Max. cutting width: 5300 mm Max. cutting height: 2200 mm Saw blade diameter: 300 mm Max. processing thickness: 80 mm Saw blade bore: 30 mm Bottom support: Fixed rollers Saw head pivoting: Manual Saw feed: Automatic Extraction: External extraction Approx. weight: 1500 kg Motor power: 5.5 kW Cpedpfx Afevvkq Tjnou Storage location: Nattheim

Condition: used, Year of construction: 1977, functionality: fully functional, Cutting area: 5300 x 2200 mm Wall mounting Space requirement: 6300 x 2820 mm Cedoyaq Ecjpfx Afnepu Wooden slats Good condition Price ex location Transport available at additional cost!

Condition: good (used), machine/vehicle number: 3270, Year of construction: 2012, load capacity: 12,000 kg, lifting height: 4,540 mm, mast type: duplex, fork carriage width: 200 mm, fork length: 2,400 mm, total length: 4,450 mm, total width: 2,550 mm, operation weight: 17,820 kg, additional equipment features: Dual tread, Front mud guards, Weight system, Equipment: lighting, Kalmar DCE120-6 from Uniktruck Cpedeul D H Ajpfx Afnou

Condition: good (used), Year of construction: 2008, Model: STRIEBIG CONTROL 6224 Voltage: 400 V Power: 4.4 kW Year of manufacture: 07/2008 Cpedpfx Afjydf Dnensu

Condition: used, Year of construction: 2003, Cutting capacity: 5300 x 2240 x 80 mm Motor: 5.5 kW (7.5 HP) Saw blade: 300 mm Vertical cutting interface distance: 1000 mm Feed speed: 10-25 m/min Four-sided edging Pre-scoring saw unit freestanding Storage location: Nattheim Cpodpfxjx Twdas Afneu

Condition: used, No. 3198 Machine package painting & surface treatment BUETFERING, HEESEMANN, Barberan Used Consisting of: - Wide belt sanding machine BUETFERING Classic 313 - QCE - UV lacquer roller Barberan BRB - 1400 - Drying channel Barberan HOK - 14/2 - Lacquer sanding machine HEESEMANN FGA 8 - Suction unit Schuko Vacomat S/N 25/45 Technical data: - Wide belt sanding machine BUETFERING Classic 313 - QCE Used, year of construction 2000 Sanding width 1350 mm Sanding belt width cross belt 150 mm Sanding belt length cross belt 4700 mm Sanding belt width wide belt 1370 mm Sanding belt length wide belt 1900 mm Workpiece thickness 3 - 150 mm Feed infinitely variable 2.5 - 13 m/min Power cross belt 15 kW 1st wide belt 12.5/16 kW 2nd wide belt 11 kW Total connection 49 kW Sanding of veneered workpieces with the cross sanding unit and the link pressure beam in one or two passes Precise calibration with the contact roller of the 2nd unit Sanding solid wood: 1st pass with the contact roller / 2nd pass with the cross sanding unit and the link pressure beam Weight of the machine 4500 kg - UV lacquer roller Barberan BRB - 1400 Used, year of construction 2006 For application of primer and top coat - Drying channel Barberan HOK - 14/2 Used, year of construction 2006 With half pressure lamp made of mercury or gallium, with an output of 80 W/cm or 120 W/cm Elliptical point reflector, air cooled, made of aluminum Air cooling system for each lamp or reflector - Lacquer sanding machine HEESEMANN FGA 8 Used, year of construction 1994 Multi-purpose surface sanding machine 1 sanding belt, oscillating Sanding belt width 1350 mm Drive 11 kW Workpiece height max. 140 mm Cjdpfx Aevxrynofnjpu Sanding belt dimensions 2620 x 1350 mm LW - Suction unit Schuko Vacomat S/N 25/45 Used, year of construction 2000 Filter area 45 m2 Sale on behalf of the customer, ex location near 86156 Augsburg, without dismantling, without transport and assembly Dismantling, loading and transport by us optionally possible Errors in the description and price excepted To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, Year of construction: 2001, Max. cutting width: 4600 mm Max. horizontal cutting height: 1958 mm Max. vertical cutting height: 2070 mm Max. machining thickness: 60 mm Saw blade diameter: 250 mm Saw blade bore: 30 mm Bottom support: fixed rollers Material support: aluminum slat frame with plastic coverings Small parts support: Yes Measuring system: scale Saw head tilting: manual Mounting: free-standing Scoring unit: with saw blade Weight approx.: 700 kg Motor power: 3 kW Extraction diameter: 2x100 mm Storage location: Cpodpfxex Hwqae Afnou