Cenventional Lathe

SUNMASTER ML 2040 V

Condition: excellent (used), Year of construction: 2018, operating hours: 15,845 h, functionality: fully functional, machine/vehicle number: S6E182501, spindle bore: 65 mm, spindle speed (max.): 5,000 rpm, spindle motor power: 22 W, The machine is very well maintained, with 90% of its operation carried out by a single user. Serviced according to the manufacturer's recommendations. Godpeyvtugofx Am Ejbw

Condition: refurbished (used), Year of construction: 1975, functionality: fully functional, CANALI Vertical Automatic High-Performance Block Bandsaw Model BBS.V "PACIFIC" K/L-B-P 1800, Type 555, Year of Manufacture 1975 with control panel in the cabin, bandsaw wheels Ø 1800 mm, bandsaw wheel width 280 mm, max. saw blade width 310 mm, bandsaw blade length 11,500 mm bandsaw size 11495x310x1.85x55 log infeed system approx. 20 m long, four-strand system with inserter Godpfx Amexvrnio Esbw block carriage with ejector onto block cross conveyor CANALI pneumatic clamping carriage, Type 501.09 with 4 clamping jaws, 3 log turners, 4 ejectors, drive power 100 kW, carriage speed 5-120 m/min. powered roller conveyor with slab removal with brush, lifting device with puller for trimming complete electrical switchgear cabinets complete sharpening room equipment for bandsaw blades

Condition: used, Year of construction: 1979, Technical details: grinding diameter min/max: Aufnahme: Ø 200 x 32 mm number of spindle speeds: 3000 U/min Godpfxeu Ng Ncj Am Ejbw total power requirement: ca. 1,2 kW weight of the machine ca.: 0,24 t dimension machine xH: 0,7 x 0,9 x 1,6 m The grinding spindle is equipped with two hand levers: Working range left = hand grinding device for small shank drills, grinding wheel currently Ø 120 x 30mm; admission=Ø 32mm; speed 3000 rpm.; with grinding support Working range right = swiveling device for conical shank drill; cup grinding wheel currently Ø 160 x 30mm; admission=Ø 32mm; speed 3000 rpm. Cutting angle max 180° for double-edged and 120° for triple-edged Clearance angle 5° - 9°; drill-Ø 8 - 40mm, possible grinding modes e.g.: normal grinding, DK-grinding, center grinding, spiral grinding, step drill grinding Machine illumination available *

Condition: like new (used), Year of construction: 2021, operating hours: 3,573 h, functionality: fully functional, machine/vehicle number: S4E213351, turning diameter over cross slide: 300 mm, turning length: 480 mm, turning diameter: 220 mm, spindle bore: 45 mm, spindle speed (max.): 6,300 rpm, travel distance X-axis: 160 mm, travel distance Z-axis: 510 mm, spindle motor power: 13,000 W, total height: 1,960 mm, total length: 2,575 mm, total width: 1,760 mm, swing diameter over cross slide: 300 mm, turning diameter over bed slide: 430 mm, type of input current: three-phase, overall weight: 3,300 kg, Equipment: documentation/manual, rotational speed infinitely variable, EMCO EMCOTURN E45 (Year 2021) CNC turning machine with FANUC 0i-TF, 3,573 hours, like-new condition! Includes a parts collection device for transporting finished parts. • Manufacturer: EMCO (Made in Austria) • Model: EMCOTURN E45 • Year: 2021 • Serial Number: S4E213351 • Control: FANUC 0i-TF incl. handwheel • Operating Hours: 3,573 h • Power-On Hours: 14,792 h (Control ON) • Machine Type: Single-spindle with parts collection device • Number of Tool Positions: 12-station VDI-30 axial turret with two hole patterns • Number of Axes: 2 (X/Z) • Chip Conveyor Interface: Yes, available • Condition: Like-new, fully functional (Inspected by EMCO technicians on November 9, 2026! - Inspection report will be provided upon request) • Location: Graz • Availability: Immediately available from stock • PICTURES/VIDEOS: Additional pictures and videos of the running machine will be provided upon request. _____ Item Description For sale is a high-precision CNC turning center, an EMCO EMCOTURN E45 from 2021, with low operating hours of only 3,573 h, in very good condition. Special features: • Control: Modern FANUC 0i-TF control for easy programming including handwheel • Parts collection device: The parts collection device (parts catcher) of the Emco Emcoturn E45 carefully transports finished workpieces out of the work area and automatically drops them into a finished parts container. • Powerful main drive: Single-spindle configuration with 13 kW drive power and a maximum speed of 6,300 rpm. • Tool changer: Fast 12-station axial turret (VDI 30) with a turret indexing time of only 0.14 seconds. • Quality components: High-quality, robust control cabinet from RITTAL for maximum reliability of the electronics. _____ Technical Data: Working area and travels: • Swing diameter over bed: 430 mm • Swing diameter over cross slide: 300 mm • Distance between centers: 670 mm • Max. turning diameter with axial turret: 220 mm • Max. workpiece length: 480 mm • Max. bar diameter: Ø 45 mm • Slide travels (X / Z): 160 / 510 mm Main spindle and drive: • Speed range: 0 – 6,300 rpm • Drive power main spindle: 13 kW • Torque at the spindle: 78 Nm • Spindle connection: DIN 55026 KK 5 • Spindle bearing (inner diameter) / Spindle bore: 80 mm / 53 mm Tool turret (axial VDI 30): • Number of tool positions: 12-station VDI-30 axial turret with two hole patterns • Shank according to VDI (DIN 69880): VDI 30 • Tool cross-section for square tools: 20 x 20 mm • Shank diameter for drilling bars: Ø 32 mm • Turret indexing time: 0.14 sec Feed drives and accuracy: • Rapid traverse rate (X / Z): 24 / 30 m/min • Feed force (X / Z): 4,000 N / 6,000 N • Acceleration time from 0 to rapid traverse (X / Z): 0.1 sec • Positional accuracy according to VDI 3441 (X / Z): 2 / 2 µm _____ Scope of delivery & Terms of sale: Gsdpfx Amszkhuhj Eobw • CNC turning machine EMCO EMCOTURN E45 • Tools: The tools shown in the pictures are included • FANUC operating manuals and machine documentation • Loading with a forklift on site is included. The machine is immediately available and can be inspected and tested under power after prior appointment. Subject to prior sale and errors.

Condition: good (used), NHH lathe Type: 1N611N Turning diameter bed: 260 mm Turning diameter support: 160 mm Godpfx Amjqgdkij Eebw Spindle bore: 26 mm Turning lenght: 600 mm Digital measurement Diameter faceplate: 155 mm Speed: 2000 RPM Dimensions: 150x85x155 cm LxWxH

Year of construction: 2005, condition: excellent (used), The subject of the auction is the sawmill line BRODPOL The line consists of a log prefeeder plus a cascade, an input feeder, a BRODPOL TT5/500/320/G circular sawmill with a centering device and a receiver, and a distribution table. - diameter of the processed log 100 - 320 mm - length of processed log 1250 mm - 6000 mm - diameter of circular saws (only) 500 mm - maximum number of saws on the spindle 5 pcs. - feed speed 10 - 28 m/min. Gsdsl H Hy Hjpfx Am Esbw - power of main motors 55 kW + 75 kW Hcwgak9s - required connection of pneumatic supply 6 atm. - capacity up to 20 m³ per hour of operation

Condition: used, Elmag metal lathe, good condition, approx. 1500 mm center distance, approx. 3000 kg Prices subject to change, errors, printing and typesetting errors reserved Gjdjvrvmfepfx Am Eebw

Year of construction: 1960, condition: refurbished (used), machine/vehicle number: 1733, Vertical internal broaching machine with switching plate of the company Karl Klink Type: RSI10DT Machine No.: 1733 Year of manufacture: 1960 Gbjdpogyd S Ssfx Am Eow weight: 4,9 to broaching force: 10.000kg With switch plate ( 2 stations ) Power supply: 380V / 50Hz Rated current: 35 A Connected load: 7,5 kW The machine is completely revised and is therefore in a very good condition.

Condition: good (used), Year of construction: 1983, Machine number: 316204/22 Type / Model: FSS 315/E Gjdofli Afopfx Am Eebw Travel ranges x-y-z: 850 – 280 – 355 mm Table: 1,200 x 370 mm Clamping area: 1,060 x 260 mm Speed range: 28 to 1,400 rpm Spindle mount: SK 50 Quill stroke: 80 mm Feeds for x and y axes: 16 to 800 mm/min Feed for z axis: 5 to 250 mm/min Power: 8 kW Accessories/Equipment: Head swivels Condition: good Weight: 4 t Dimensions: 2,000 x 2,000 x 2,400 mm

Condition: used, Year of construction: 1986, faceplate diameter 2500 mm swing diameter 2800 mm turning height 2200 mm table load 15 t Rest 2 total power requirement 55 kW weight of the machine ca. 56 t The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Gjdpfsyqvkxsx Am Esbw If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team