Toyo Si-350-6S JH750E-PACK

Toyo Si-350-6S JH750E-PACK

Year of construction: 2022, condition: like new (used), Piovan dryer SIST. DEUM. GMP150+2xPTUN2000 RAFFRED. GMP150+2xPTUN2000 COOLING SYSTEM As good as new, unused The PTUN... module is a single drying unit for plastic material. Lrodevhb S Sepfx Akqok The machine consists of the following parts. - Hopper. - Holding frame. - Heating chamber. - Connection lines. - Air control valves.

Year of construction: 2008, condition: ready for operation (used), Sanding range: 2000x900mm, transverse movement: 875mm, longitudinal movement: 2450mm, distance table to spindle center: 845mm, magnetic clamping plate dimensions: 2000x800mm, max. table load: 2.3t, feed rate longitudinal axis: 1000-30. 000mm/min, feed transverse axis: 0,01-2000mm/min, feed vertical axis: 0,001-1500mm/min, grinding wheel dimensions: 500x100x203,2mm, power grinding spindle motor: 22kW, length: 6800mm, width: 3450mm, weight: 13t. On-site inspection is possible. Lrsdjuyk N Iopfx Akqjk

Condition: ready for operation (used), Year of construction: 2012, controller manufacturer: SIEMENS, controller model: 840 D, number of axes: 4, This 4-axis Mazak VTC 800/30SR was manufactured in 2012. It features a high-pressure coolant system at 15 bar, a 48-tool magazine, and dual auto tool length measurement units. Equipped with Siemens software, a Visiport, and an RMP60 probe, it's ideal for precise vertical machining tasks. If you are looking to get high-quality milling capabilities, consider the Mazak VTC 800/30SR machine we have for sale. Contact us for more information. • High-pressure coolant (15 bar) Ledpsx D I A Sofx Akqsrk • Auto tool length measurement x 2 units • Visiport • 19" screen • Siemens software P • Signal tower • Additional work light • RMP60 probe • Bracket for NCRT for vertical use • Table centre partition • 48-tool magazine Additional equipment • Consep 2000 (chip conveyor/coolant system) for 15 bar, left-hand discharge

Year of construction: 2019, operating hours: 5,500 h, condition: excellent (used), functionality: fully functional, Plant to be picked up by 05/26-23 - one bid obligates timely dismantling & pickup. TECHNICAL DETAILS: Lredpfx Aok H D Haekqek Max. Workpiece size: 1050 x 820 x 300 mm Max. workpiece weight: 1.000 kg Travel: 600 x 400 mm Wire diameter: 0,1 - 0,3 mm Machine weight: 3.000 Kg Control: Fanuc 31i -WB installation dimensions: 2.440 x 2.680 mm Machine hours: 5.500 Betr.

Year of construction: 2005, condition: refurbished (used), functionality: fully functional, Twin parallel screw extruder - Manufacturer: WEBER Ledouziyhjpfx Akqsrk - Type: DS 8.5 - Year: 2005 - Double parallel screws ø85mm 17D - 5 heating zones on the cylinder + 2 cooling zones - 5 tool heating zones - Engine power: 56kW - Up to 150kg/h profile - 230kg/h tubes Very good condition

Condition: used, Year of construction: 2018, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 820 mm, travel distance Z-axis: 720 mm, controller model: Mazatrol SmoothG, table width: 820 mm, table length: 3,500 mm, overall weight: 16,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 22,000 W, number of slots in tool magazine: 48, input voltage: 400 V, type of input current: AC, Equipment: chip conveyor, CNC Vertical Machining Center MAZAK VTC-820/30 (Year of manufacture 2018 / Commissioned 2019) The MAZAK VTC-820/30 is a high-performance CNC vertical machining center designed for precise and efficient machining of large workpieces. With generous travel distances of 3,000 mm on the X-axis, 820 mm on the Y-axis, and 720 mm on the Z-axis, this machine is especially suitable for long and complex components in mechanical engineering, mold making, and general metalworking. Lredpfsyipy Rex Akqsk The robust worktable, measuring approximately 3,500 × 820 mm, allows for the accommodation of large-dimensioned workpieces. The powerful main spindle, with speeds up to 12,000 rpm and a drive power of around 22 kW, ensures high metal removal rates and accuracy. The CAT 40 (ISO 40) spindle taper provides broad tool compatibility. The machine is equipped with a state-of-the-art MAZATROL SmoothG control system, offering intuitive operation, fast programming, and high process reliability. The 48-position tool changer enables flexible and efficient production processes, even for complex manufacturing tasks. To ensure optimal production conditions, the machining center features through-spindle coolant supply, a chip conveyor, and a lubricant preparation system. With a machine weight of approximately 16,500 kg, the VTC-820/30 offers outstanding stability and vibration damping, which has a positive effect on surface quality and dimensional accuracy. Overall, this is a modern and versatile vertical machining center that delivers high precision, performance, and reliability for industrial manufacturing applications. With us, you are in the best hands – professional, reliable, and passionate about machinery! PS CNC Service Germany GmbH & Co. KG All information without guarantee.

Condition: good (used), Year of construction: 2010, Clamping force: 200 t Screw diameter: 35 mm Shot weight: 141 g Distance between tie bars V: 570 mm Distance between tie bars H: 570 mm Shot volume: 154 cm3 Screw stroke: 160 mm Injection pressure: 2000 bar Type: Horizontal Lodpfx Aswpkfcokqork Drive: Hybrid Equipment: Thermoplastics cylinder cpl. 35 mm high-wear resistance Drive unit w. 11 kW motor and 21.4 l/min capacity SELOGICA 'direct' controller Air blast system 1 with pressure reducer Interface for robot system (EUROMAP 67), 50-pin AED - electrom. dosage drive 9 electr. heating control circuits for mould heating Interface for colouring device 8 free cooling circuits manually adjustable Position-regulated screw

Condition: used, Year of construction: 2016, Overview This filler was manufactured in 2016 by CIMEC and comes with an Arol crown capper. The filler has an output of 1,800 bottles per hour, processes bottle sizes from 0.33 l to 0.75 l and is in very good condition. The machine can be viewed in person at any time. Technical details  Filler | CIMEC | AM DPS 9-8-1C | 2016 Output: 1,800 bottles/hour Number of rinsing nozzles: 9 Number of filling valves: 8 Bottle sizes included: 0.33 l - 0.75 l (with other set also 0.5 l) Electrical power: 6 kW, 400V, 50Hz Dimensions Width: 1,400 mm Length: 3,200 mm Complete length with labeler: 8,800 mm Operating hours: 1,370 hours Complete documentation available Capper | Arol | TSI-Eagle C | 2016 Pitch diameter: 410 mm Number of heads: 1 Type of closure: Standard crown cork Complete documentation available Lredpfx Aevy D Adskqjk

Condition: used, Set of machines for the production of beverages in 5-liter PET bottles. 1) RIVI 24 carousel filling machine - machine modernized in 2013 - previously used for 1.5 L bottles (24 fillers) - number of filling heads: 12 pcs (for 5 L bottles) - capacity: approx. 1800 bph 5 L 2) ZALKIN 4 PET bottle capper - number of closing heads: 4 pcs - capacity: approx. 2000 bph Used machines, functional at the time of dismantling. Complete original technical documentation. Other offers also include semi-automatic blow molding machines for 5 L PET bottles, compressors and bottle labelers. Lodpfx Asu I N Npekqsrk .

Condition: used, Year of construction: 2001, operating hours: 58,764 h, functionality: fully functional, machine/vehicle number: 502748, clamping force: 1,000 kN, screw diameter: 30 mm, clearance between the columns: 420 mm, displacement volume: 144 cm³, injection pressure: 1.905 bar, ejector force: 41 N, ejector stroke: 150 mm, opening stroke: 500 mm, plate length: 590 mm, plate width: 590 mm, installation height: 250 mm, total length: 4,550 mm, total width: 1,450 mm, total height: 2,000 mm, overall weight: 4,800 kg, heating capacity: 9 kW (12.24 HP), pump power: 30,000 W, height adjustment type: hydraulic, stroke length: 150 mm, tool height: 250 mm, tool weight: 700,000 g, Equipment: documentation/manual, Demag ERGOtech Injection Moulding Machine ERGOtech 100-420-200 NC4 Year of manufacture: 2001 Asking price: €8,000.00 – WITHOUT Wittmann peripheral equipment The injection moulding machine is in good condition and ready for operation. For sale is the ERGOtech 100-420-200 NC4 injection moulding machine. Ljdstltvzspfx Akqerk Optionally, all corresponding Wittmann peripheral devices can be included at an additional charge. We purchased the Demag ERGOtech in 2020 during our company expansion to fulfill a customer order and equipped it with matching Wittmann peripheral devices. The machine has been serviced on-site by a DEMAG service technician and is free from defects. OPTIONAL: We also offer for sale all associated Wittmann peripheral equipment: Peripheral Equipment from WITTMANN BATTENFELD Deutschland GmbH: Wittmann Tempro Plus D160 – Dual-circuit temperature control unit TEMPRO-PLUS-D-Standard-2-160 DEMONSTRATION UNIT – used, no defects Equipped with: 2 pcs. Reinforced pump TemproPlus D160-1.0kW (2.4A) 60l 1 pc. Ultrasonic flow measurement 140-180° 1 pc. Digital interface 20mA 1 pc. Packaging for temperature control unit Original price: €6,980.00 Sale price: €3,490.00 Wittmann Compact Chiller Coolmax C30 WITTMANN WATER CHILLER SERIES: COOLMAX C30 DEMONSTRATION UNIT – used, no defects Original price: €4,750.00 Sale price: €2,375.00 WITTMANN BATTENFELD Deutschland GmbH Drying and dosing accessories - 1 pc. DRYMAX-PRIMUS: E30-70-M for drying plastic granules - 2 pcs. FEEDMAX-S:3NET for conveying free-flowing plastic granules, hinged lid with integrated collector motor - 1 pc. HOPPER: MT203 machine hopper 203 for mounting a series 200 separator - 1 pc. DOSIMAX: MC 18 dosing unit for free-flowing granulate Condition – NEW – Unused Original price: €8,467.00 Sale price: €4,233.50 All prices are exclusive of the statutory 19% VAT. PLEASE NOTE: The offer does not include relocation or transportation costs for the machine. These services can be offered and organised separately upon request. For further questions, please feel free to contact me at any time.