BENDING PRESS

VECCHIATO DE 120/70_800

Condition: good (used), Year of construction: 2006, machine/vehicle number: 108111, functionality: fully functional, working width: 240 mm, planing height: 160 mm, working height: 180 mm, Four-sided planer after service inspection, machine weight 3900 kg Duodpsvrq U Dsfx Ahnsu

Year of construction: 2014, condition: good (used), For sale is a Nilfisk compact safety industrial vacuum cleaner Dodpfxshu Sf He Ahnsuu type CTS40 M Z22 400 C 4 kW 9 A 50 Hz 114 kg Ex-proof The vacuum cleaner is in good condition and ready for immediate use Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us please visit our website

Condition: used, Used machine Djdpfswpm I Hjx Ahneuu Features and technical data: - Press area: 2,200 × 1,100 mm - Number of cylinders: 4 - Max. pressing force: 60 tons - Version: single deck - Heating plates: gold anodized ELKOM energy-saving plates - Opening width: 350 mm - Connected load: 14 kW - Piston diameter: 80 mm - Operating pressure: 365 atü Dimensions: 2,600 m × 1,250 m × 1,750 mm Availability: short-term Location: Röllbach

Condition: new, Technical data: Working width: 970 mm Grinding width: 950 mm Working height: 3 - 160 mm 1 steel aggregate 2 combination unit with shoe The shoe is pneumatically pressed Sanding belt dimensions: 970 x 2150 mm Common motor power of 2 grinding aggregates: 11 kW The speed of the feeding belt on the converter: 16-18 m / sec. Table height adjustment motor power: 0.25 kW Feed belt motor power: 0.55 kW Sanding roll diameter: 150 mm Sanding pad width: 50 mm Sanding belt speed: 18 m / s 1 unit Compressed air consumption: 20l / min Standard equipment: Mechanical oscillation of the sanding belt without the use of compressed air. ECO GEAR SYSTEM Smooth regulation of the feeding belt on the converter 4-20m / min Automatic star / delta start Steel roller on the first aggregate, rubberized on KOMBI agragata Electronic table height display Automatic reading device for gr. material and table position setting Safety switches Automatic machine switches Main engine brake Rubber pressure rollers 2-roller table at the entrance and exit In stock! Machine dimensions: Dujdpfsg A D Anjx Ahneu Length: 1630 mm Width: 1656 mm Height: 2025 mm

Condition: used, Year of construction: 2009, functionality: fully functional, Machines connected in one line (all three machines are only sold together). 1. Veneer crossfeed splicing machine Fisher+Rueckle FZR-15, year 2009 2. Direct Stacking Device Fisher+Rueckle DAR-22, year 2009 3. Scissor lifting table 1000 kg Dusdst Akcfjpfx Ahnou TECHNICAL DOCUMENTATION (full on request) Veneer Cross-feed Splicing Machine FURNIMASTER FZR-15 Veneer format length (longitudinal to the fibre) 350 - 1500 mm Veneer format width (transverse to the fibre) 50 - 500 mm Veneer strip thickness 0.3 - 1.5 mm Max machine output 30 cycles/min. (the output rates are related to an average veneer strip width of 100 mm transversely to the fibre) Connected load (basic machine): Power rate 13.5 kW Compressed air pressure 6 bar Power consumption: Electric power 6.2 kWh Compressed air supply 15 NL/min. Dimensions and weight (basic machine): 2940 mm L x 1000 mm W x 1530 mm H. 3200 kg

Year of construction: 2026, condition: new, The AL-KO Sanding table AST 1.5 BASIC is the entry-level model for the AL-KO sanding table program. It is certified according to GS-HO-11 and bears the seal "Wood dust tested according to BGI 739-1". It is therefore suitable for manual grinding as well as for machining workpieces with manual work machines. The grinding table is made of galvanized steel sheet. The workpiece support consists of a removable beech wood grate. It is accessible from all 4 sides. So that several people can work at the same time. Thanks to the sturdy, structurally stiffened construction, workpieces with a weight of up to 150 kg can be processed. In order to adjust the work surface of the AL-KO AST 1.5 BASIC to the required working height, it is equipped as standard with a mechanical height adjustment. The height adjustment is done without any tools by adjusting the feet in scaled grid dimensions. In addition, all feet can be adjusted in millimeters according to the respective ground conditions. The extraction trough is optimized in terms of flow technology. Due to the funnel-shaped design of the trough with integrated air duct, the air stream is directed to the intake socket. Depending on the extraction capacity required, the connection to the customer-specific extraction system can be made via a connection piece Ø 140 or Ø 160 mm. The bending of the machining surface on both two longitudinal sides also allows machining of workpieces on the end face The suction grilles are aligned with the flow connection to the suction port and thus guarantee an optimal extraction result. For cleaning work inside the sanding table, the slat grating can be lifted off and the air duct can be removed by loosening a few screws. The sanding table is delivered pre-assembled, only the feet have to be mounted and adjusted to the required working height. Tender specification AST 1.5 BASIC Dedpsfyadbefx Ahnjuu page 2 from 2 Technical data AST 1.5 BASIC: - Intake socket 140/ 160 mm - Required suction performance 1.500 m³/h - Vacuum on socket at 22 m/s 1.000 Pa bei Ø 140 mm 700 Pa bei Ø 160 mm - Working height adjustable 735 – 1.015 mm - Working surface (W x L) 946 x 1.500 mm - Dimension (W x L) 1.000 x 1.600 mm - Weight approx. 73 kg

Year of construction: 2022, condition: new, ZIM A3600 machine can make concrete pipe, square culvert and other concrete materials between 800mm-3600mm diameter and 2000mm-3500mm lenght. In this machines mortar stocking and filling operations are done by mortar conveyor band with bunker. Materials which produced in this machine are transferred to drying area via crane. Our machine is making production on steel pallets. Produced material is carried to drying area with outer mould. After discharging the ready material to drying area, outer mold is movingto main machine for new production. Our Machine is working with hydraulic press and vibration systems. Vibration system of the machine is special design of ZIM Engineers. Vibration system which have oil cooling system and special oil unit. Duedpjibbigefx Ahnsu Special designed strong chassi of the machine enables long live producing without errors. Vibration table is made on high precision CNC machines.

Condition: good (used), Year of construction: 2010, Industrial vacuum cleaners, vacuum cleaners, dust extractors, industrial vacuum cleaners, floor vacuum cleaners, safety industrial vacuum cleaners -EX: protected -Manufacturer: Nilfisk, ultra-compact industrial vacuum cleaner with side channel blower -Type: CTS22 H Z22 Dodjgl Duzopfx Ahneuu -Connection: 400 volts -Power: 2.2 kW -Number: 3 devices available -Price per piece -Dimensions: 1100/770 / H1270 mm -Weight: 127 kg / piece

Condition: used, Pressure: 250 T Length of stroke: 120 mm Dsdpfx Aj Du U Djhnouu Down table size: 1600x1600 mm NEW HYDRAULIC AND ELECTRIC SYSTEMS

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, working width: 1,200 mm, overall weight: 2,000 kg, table width: 1,200 mm, Veneer Splicing Machine Manufacturer: Fisher Rückle Model: Impetum 1200 Year of manufacture: 2019 For gluing and tightly splicing parallel-aligned veneer strips in a single operation with standard urea adhesives. Splicing Performance Continuously adjustable feed speed, practical reference value approximately 20 - 30 m/min. Technical Data: Veneer strip lengths (along the grain): 380 - 3800 mm Veneer strip widths (across the grain): 45 - 1200 mm Veneer strip thicknesses: 0.4 - 1.5 mm Feed speed: 5 - 40 m/min Throat depth: approx. 1,200 mm Touch panel with temperature, speed, and pressure displays. Data storage for machine settings for repeat orders. Robust and virtually wear-free stainless steel transport chains. Dedpfxjymcu Ns Ahneuu 6 heating zones for various temperature settings. Integrated cooling unit for glue pot cooling.