Cycle lathe

Weiler E 40

Condition: as good as new (ex-display), Year of construction: 2013, operating hours: 2,100 h, turning diameter over cross slide: 200 mm, spindle bore: 66 mm, turning diameter over bed slide: 435 mm, center height: 217 mm, turning length: 1,000 mm, total length: 3,061 mm, spindle speed (max.): 3,500 rpm, spindle speed (min.): 1 rpm, bed width: 202 mm, For sale: WEILER E40 Precision Lathe – only 2100 hours on the clock, Machine condition as new. Features a 435 mm swing over bed, 200 mm swing over cross slide, 66 mm spindle bore, and a 1,000 mm turning length. Perfect for workshops needing accuracy and durability. Fpjdjv A Irzjpfx Agrsb

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 3.04-00054, Equipment: type plate available, Used Bellaform extruder Type: BH45-30D Year of manufacture: 2013 With screw dimensions 45 mm - 30 l/d, screw speed approx. 160 rpm With 30 kW water-cooled servo motor, with gearbox Cylinder with 4 heating/cooling zones and water bushing in the feed area Material hopper plus a COLORTRONIC dosing screw for masterbatch A melt pressure sensor Control cabinet integrated into the machine frame, with factory-new PLC and With new touch panel for simple and intuitive operation Fpsdpfx Ageuxa Abereb This extruder has been functionally tested! Dimensions: approx. 195 x 70 x 200 cm (L x W x H with hopper)

Condition: good (used), Year of construction: 2008, In good technical condition and fully operational. Year of manufacture: 2008. Additional Y-axis ±60 mm Maximum spindle speed 3,000 min⁻¹ Spindle motor power 22/18.5 kW Maximum driven tool speed 6,000 min⁻¹ - 300 mm chuck with 90 mm through hole, spindle head A2-8 - Increased power and torque 25/30 kW, 1,000/1,300 Nm - Turning diameter 420-500 mm Fpodpfx Agsxdcigereb - Turning length 1,250 mm - C-axis, driven tools - NC tailstock, fully programmable, separate motor - Increased Z-axis power - New chip conveyor

Condition: good (used), Year of construction: 2007, functionality: fully functional, Weiler C30 x 750 precision lathe (2007) Manufacturer: Weiler Type: C30 x 750 Year of manufacture: 2007 Availability: several machines available Condition: very good, used, from training workshop, last maintenance 09/2024 Center width 750mm Circulation diameter over bed 330mm Rotation diameter facing slide 160mm Movement of facing slide 180mm Bed width 240mm Turning tool cross-section 20 x 20mm Spindle head according to DIN 55027 size 5 Spindle diameter in front bearing 70mm Spindle bore 40.5mm Inner taper of the main spindle 5mm Drive power 60 %/100 % ED 9/7KW Total speed range 1 - 4,500 rpm Fpedpexd Tiwjfx Agrob Feed force longitudinal 6,000N Planar feed force 3,000N Feed range 0.001 - 10 mm/rev Rapid traverse speed longitudinal/plane 6/3 m/min Metric threads 0.1 - 400mm Inch thread 56 - 1/4 G/inch Module thread 0.125 - 28mm DP thread 224 - 1 Dp Max. Threads 99 Quill diameter 50mm Quill stroke 130mm Inner taper of quill MK3 Length 1750mm Width 1350mm height 1670mm Weight 1300kg Scope of delivery Rota S Plus 200-52 jaw chuck Multifix Machine light Coolant system Machine feet Original documentation Weiler maintenance log 09/2024

Condition: like new (used), Year of construction: 2021, operating hours: 1,200 h, functionality: fully functional, turning diameter: 1,100 mm, power: 46 kW (62.54 HP), distance between centers: 2,000 mm, load hours: 1,200 h, A DMT CD1100 lathe with Heidenhain control and only 1200 operating hours is available. The working area includes a swing diameter of approx. 1100 mm over bed and approx. 800 mm over cross-slide. The tool holder is a Multifix D1. The distance between centers is 2000 mm. Fodpfxexlza Ho Agrjpb The main spindle drive is a motor with 46 kW power at 60% duty cycle and features a two-speed gearbox. Tailstock: - Quill diameter: 125 mm - Taper: 6 Mk Electrical equipment: - Three-phase current: 400 V, 50 Hz - VDE and EMC directives EN50081-2 / EN50082-2 Delivery: Collection by the buyer Payment: 100% prepayment by bank transfer immediately upon invoicing All details are subject to change and prior sale is reserved. The machine is sold without any warranty claims and remains our property until full payment has been received.

Year of construction: 2009, condition: used, Technical details: tool taper: Ø 54 voltage: 3Ph AC 400V / 50-60 Hz V / Hz compressed air: Anschluß: 6 bar total power requirement: 11 kW Total weight, approx.: 120 kg dimensions L x W x H: 0,7 x 0,65 x 1,7 m Fpjdpfx Agswp I S Herob Application: for secondary quick tool change through targeted inductive heating. Induction shrink fit unit with water cooling (tank 30 litres, built into the housing) Cooling medium: emulsion for Ø 3 - 50mm HM (carbide) and Ø 6 - 50 HSS tools Tool holder Ø 54mm Concentricity < 0,003mm ThermoGrip chuck Operation via control panel *

Condition: new, Year of construction: 2025, functionality: fully functional, Rotating basket parts washing machine for washing engine blocks and parts - new machine Technical details: Basket diameter: 900 mm Loading Height: 450 mm Loading Capacity: 300 kg Tank capacity: 80 lt Pump pressure: 2,5 bar Pump power: 3,0 Hp Heater: 7,5 kw Electricity (V/Phase/Hz): 220-380-415/3-1/50-60 Timer: 0 - 90 min. Working temperature: 0-90 C° Packing size:1450x1080x1340 mm Packing weight: 300 kg Main dimensions: Fsdpfx Agoncfmverepb W x L x H: 1100 x 1100 x 1150 mm Weight: 350 kg The parts washing machine is also available in larger sizes! Larger machines: AWM1250: With 1150 mm basket diameter and tank capacity 200 lt AWM1500: With 1350 mm basket diameter and tank capacity 300 lt If you are interested, please contact me! More machines for sale: Berco, Comec, Sunnen, Carmec, Kwik-Way, Serdi, PEG Valve grinder, head and block resurfacer, valve seat milling, pressure tester, parts washer machines

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 6,205 h, load capacity: 5,000 kg, lifting height: 3,925 mm, free lift: 1,210 mm, fuel type: electric, mast type: triplex, construction height: 2,210 mm, fork length: 2,400 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 Mast type: Triplex Condition: Reconditioned with warranty Technical condition: very good Front tires type: Superelastic Rear tires type: Superelastic Battery Volt: 80V Battery Ah: 840Ah Battery year of construction: 2017 Battery condition: 80 - 100% Description: TOP CONDITION !!! - GENERALLY REFURBISHED by LINDE !!! Fsdpet Iy Rvofx Agrspb Sideshift, fork positioner, 3rd valve, 4th valve, rear working lights, front working lights, heating, full cab, CE certificate, safety light, LED, Container compatible, Double pedal control, Integrated charger, Battery 92 % residual capacity !!!

Condition: new, Year of construction: 2025, SAPI Powder Coating The perfect layer for lasting protection. Powder coating is a highly effective and widely used method for applying a protective and decorative finish to various types of surfaces. It is a dry finishing process in which a fine powder composed of resin, pigments, and additives is applied to a substrate. The powder is electrostatically charged so that it adheres evenly to the surface, forming a uniform coating. To achieve optimal adhesion and durability, the substrate is first thoroughly cleaned and prepared. Oils, dirt, and other contaminants are removed to ensure a clean surface. This is crucial for the powder to bond effectively to the substrate and achieve a strong and long-lasting coating. A powder coating system typically consists of various components and equipment required for the application and curing of powder coatings. SAPI_Powder_spray_gun Spray Booth and Spray Area The booth provides a clean environment for the application process and ensures even powder distribution. Powder Coating Gun A powder coating gun is used to apply the powder coating to the workpiece. Powder Feed System The powder feed system consists of a hopper or container in which the powder coating material is stored. It typically includes equipment such as powder pumps, feed hoses, and powder screens to transport the powder from storage to the spray gun. Pretreatment Equipment Pretreatment equipment is used to prepare the substrate before the powder coating is applied. This may include processes such as cleaning, degreasing, rinsing, and surface treatment to ensure good adhesion and durability of the coating. Curing Oven A curing oven is an essential component of a powder coating system. It is used to heat the coated substrate to the correct temperature so that the powder coating can melt, flow, and cure into a durable finish. The oven typically consists of a conveyor system or racks to transport the coated parts through the oven chamber. Exhaust system An exhaust system will be installed in the facility to extract excess powder, fumes, or volatile compounds generated during the coating process. This system helps maintain a clean and safe working environment for personnel and prevents the accumulation of powder particles in the air. Fodpfx Agswf Dpgjropb

Condition: used, Year of construction: 2003, Technical details: turning diameter: 630 mm turning length: 2000 mm swing diameter over bed slide: 350 mm upper slide-adjustment: 195 mm bed width: 550 mm spindle diameter in front bearing: 120 mm spindle drive: 17/25 kW spindle bore: 71 mm spindle turning speed range: 3 - 1800 U/min tailstock-quill taper dia./stroke: 110/210 mm total power requirement: 30 kW dimensions of the machine ca.: 4,9 x 2,1 x 2,0 m weight of the machine ca.: 5 t Fpjdpfx Agevb Dt Serjb Machine with Monforts System Euro Turn control - quick tool change device MULTIFIX - 3-jaw chuck - coolant device - chip conveyor *