Planer and moulder

Weinig Unimat 500

Condition: excellent (used), Weinig Unimat 500 four-sided planer Working width 230mm Working height 140mm Number of spindles 6 Spindle arrangement: 1.Bottom 7.5kw Dsdsthk T Iopfx Ah Uowd 2.Right 7.5kw 3.Left 7.5kw 4.Top 11kw 5.Top 11kw 6.Bottom 7.kw Total power 56kw Feed speed adjustable on inverter Memory system Pneumatic pressure divided into 3 sections 4 rows of metal material feed rollers 2 rows of rubber drawing rollers 1 roller in the tabletop driven by a cardan shaft Length of input table top 1980mm Worktops made with Marathon Coating technology CE certificate Extraction stubs 6x140mm Machine dimensions 394x185x195cmH

Condition: used, Year of construction: 2019, Numerical control with bSolid software The multi-document software application in Windows environment allows the design of the finished product, the definition of its processes, the definition of the work plan, the simulation of the piece machining operations on the 3D model of the machine and generation of the necessary machine programs. bSolid - 3-Axis Machining bSolid - 5-Axis Machining Module for surface machining with 5-axis units and interpolation movements on all 5 available axes (X,Y,Z,C,B). The module includes the following commands: · assignment to surfaces three-dimensional roughing and finishing operations · spread or project a path onto a curved surface machining lying on a plane · follow 2D or 3D curves with any type of tool bSolid - 3D Engraving bSolid - Import external formats Fields of work: X = 5055 mm; Y = 1650 mm (may vary depending on configuration) Z = 200 mm with modules H=74 mm Z = 245 mm with modules H=29 mm Loadable piece in Y: * 1650 mm, with thickness up to 60 mm on H=74 mm modules * 1600 mm, with thickness over 60 mm on H=74 mm modules. 10 ATS floors – 40 trolleys The code includes: • 2 aluminium bars (n. 1 left and n. 1 right) on which the lateral stops slide. • 10 aluminum worktops. The worktops slide on hardened and ground linear guides using recirculating ball bearing slides. Locking occurs on both linear guides, front and rear, by means of four pneumatic cylinders. The control is activated by a button located in front of the work surface. The carriages slide on steel guides positioned above the extrusion. Pneumatic locking system divided into 2 locking zones in X Automatic positioning (EPS) for worktops. "EPS" (Electronic Positioning System) device for the automatic positioning by NC of the work surfaces and trolleys complete with locking devices capable of eliminate possible operator errors. Rear row stop, with 140 mm stroke Intermediate row stop, positioned at 405 mm, with 140 mm stroke. Front row stop, positioned at 1460 mm, with 140 mm stroke 4 lateral stops, with 140 mm stroke (2 right + 2 left) with system 2 additional side stops, with 140 mm stroke (1 right + 1 left). Sensor for checking whether the stops have descended 12 clamping devices for clamping narrow workpieces 6 loading aid bar lifts, for H=74 mm modules Configuration 5A, for Rover B. Configuration for high productivity and flexibility, thanks to the two operating groups 4 and 5 axes and the possibility of performing tool changes in concurrent time. It includes the axes and carriages for the movement of the main operating groups. Includes 2 inverters. Second Y-axis. Introduces the separation of the front and rear Y-carriages, with independent motorization. The two Y-carts have a maximum speed of 118 m/min. 13.2 kW (17.7 HP) electrospindle, HSK F63 connection, air-cooled. Main features: • 11 kW (14.7 HP) from 12,000 to 15,000 rpm in S1 service. • 13.2 kW (17.7 HP) from 12,000 to 15,000 rpm in S6 service. • Bearings ceramics. • Right and left rotation. • Rotation speed from 1,000 to 24,000 rpm programmable by NC. • The release pneumatic operation is carried out via a prismatic linear guide and recirculating ball bearings. A cover is included for chip extraction, with 6 different positions in Z managed by the NC, depending on the length of the tool, or by program. The suction mouth is automatically closed when the electrospindle is not working. Provision for subsequent installation of the 360° operating group (C-axis) Revolver tool maga... Dwjdpfew D E A Eex Ah Usd

Condition: used, Year of construction: 2005, Weinig Unimat 500 Moulding machine Description; Djdow Ebacjpfx Ah Uowd Dimensions of the infeed table: 2500 mm Number of axes: 5 Spindle Sequence: Bottom-right-left-top-bottom Mobile spindle: No Planing width: 20 / 230 mm Planing height: 12 / 120 mm Throughput: 24m/min Groove bed: No Other comments:- (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: excellent (used), Four-side planer WEINIG Unimat 500 Memory system control, 3 axes controlled from the operator panel (width, height, pressure roller positioning), Grooved table, cutterhead arrangement and motor power: bottom head 7.5 kW, right and left 11 kW each, top 11 kW, top 5.5 kW, and bottom 5.5 kW, max planing width 230 mm, max planing height 120 mm, spindles fully adjustable, spindle diameter 40 mm, feed via cardan shafts with stepless adjustment, central lubrication, Dwedpfx Ahjw Dn I Re Ued machine in original, very good condition. Everything works perfectly. Machine dimensions: length: 470 cm, width: 200 cm, height: 200 cm, weight approx. 3000 kg.

Condition: new, Year of construction: 2025, Working width: 400 mm Working height: 300 mm Djdpfx Ahji Hpk Uj Ujwd minimum workpiece length: 250 mm aggregates: 2 brush units separately adjustable 1. brush: scotch brite medium / diameter 220mm, vario drive 2. brush : Scotch Brite Hard / diameter 220mm, Vario drive Height adjustment: Handwheel Height indication: mechanical counter Feed speed: 4 - 12 m/min Motor power brushes: 2 x 3 kW / both with Vario drive (infinitely variable) Motor power feed: 0.37 kW Machine length: 1400mm machine width: 900mm Weight: 500kg

Condition: excellent (used), working width 230mm working height 120mm Djdpfew Afcvsx Ah Ujwd 6 heads heads set: bottom/right/left/top/top/bottom spindles diameter 40mm Memory System control table lubrication spindles speed 6000 RPM

Condition: ready for operation (used), Technical characteristics Capacity : 230 x 120 mm Feeding speed 5-30 m/min 2500 mm infeed table Digital axis positioning 5 shafts : Lower shaft 7.5kW Right left shapers 11kW Upper planer 11kW Lower planer 7,5kW Power and Motors Voltage: 400 V Dwjdpfxsuarxzs Ah Uod Pluging: Three-phased Power: 40 Kw Overall dimensions

Condition: good (used), Year of construction: 1990, RANDEK SP700 cut saw manufacture Randek Sweden Year 1990 in good condition Randek’s SP700 series provides reliable cut saws that are a major asset to roof truss and house producers around the world. The SP700 cut saw is effective, easy-to-use and accurate. It has been on the market for a long time and is continuously improved in close contact with our many customers. The blade on this semi-automatic saw supports angled cuts, which mean it can make any cuts you may require. You can also use the large diameter blade (700mm ) to cut several sections of stacked timber simultaneously. • Angled cuts from 0° to 360° • Cut heights up to 250 mm, possible to cut three boards each cutting cycle • PLC programmable saw • Fixation of timber near the cutting area resulting in accurate cutting Dwedpfx Aheh Ayyqj Ujd roller conveyor system with 5 adjusteable pneumatic stoppers . Lenght 6,25m outfeeding roller conveyor 4,10m Complete line: 11,5m technical inforamtion under subjet of correction

Year of construction: 2005, condition: ready for operation (used), Additional Equipment Includes approx. 70 cutter heads Z4 Several hundred new serrated-back knife blanks This WEINIG Unimat 500 was manufactured in 2005. A robust woodworking machine featuring a working range of 230 x 120 mm and five spindles, it ensures efficient processing with variable feed speeds from 4 to 30 m/min. Spindle power outputs include 4 kW for infeed and outfeed, and 7.5 kW for right/left and top spindles. Consider the opportunity to buy this WEINIG Unimat 500 woodworking machine. Contact us for more information about this machine. Application Types Dsdewkxd Ajpfx Ah Uowd Other Woodworking Machinery

Condition: excellent (used), functionality: fully functional, Four-side planer Weinig Unimat 500 Working width: 230 mm Working height: 140 mm Number of spindles: 5 Spindle arrangement: Bottom: 5.5 kW Djdpfxjwv Slks Ah Uewd Right Left: 7.5 kW Top: 11 kW Bottom: 5.5 kW Feed speed adjustable by inverter up to 30 m/min Feed motor: 4 kW Drive via cardan shafts Pneumatic hold-downs 3 axes controlled from the control panel (width, height, hold-down position) Air cushions in the worktable Infeed table length: 2470 mm CE certified DTR documentation

Condition: good (used), functionality: fully functional, SMELT professional Coating line LED/ All machines are used and still working well. Dwsdpepyg Itofx Ah Usd

Condition: excellent (used), functionality: fully functional, Description of the machine working width 230mm working height 130mm 5 heads + chamfering unit arrangement of heads: bottom/right/left/upper/lower rotation of heads 6000 rpm Memory system smooth adjustment of the feed speed up to 30m/min feed on cardan shafts table top lubrication Dodpfx Asvit Inoh Uewd pneumatic pressure feeders of pulling rollers

Condition: excellent (used), functionality: fully functional, Weinig Unimat 500 four-sided planer Working width 230mm Working height 130mm Number of spindles 5 Spindle arrangement: 1. Bottom 7.5kw 2. Right 3. Left 11kw Dwjdpfev Nkufjx Ah Usd 4. Top 7.5kw 5. Bottom 5.5kw Powercom system Pneumatic clamps divided into 4 sections Feed speed regulated by means of an inverter Feed drive on cardans Infeed table length 1970mm CE certificate

Condition: good (used), Code: 0008 Brand: ZAFFARONI Model: MLS 130 TR - CE Standard Multi-rip Saw for executing cuts and multiple grooves on strips, also with veneered surfaces and coated with various materials and it can be used, for example, for the production of prefinished parquet - CE Standard Features: Compact tubular steel structure Regulation system of the cutting and grooving depth, without changing the working table height with respect to the floor Advancement group of the workpieces through shutters, with opening by a pneumatic cylinder so to permit the tools change on the spindle Electronic adjustment of the advancement speed Workpieces input system through motorized belts and lifting rods Rear output pieces group through motorized belts Opening regulation system of the workpieces passage through the advancement group, according to the panels thickness Safety system for panels thickness control Tool-holder spindle of hardened and round steel, with anti-rotation locking, so to make easier the tools change operations; it is supported on one extremity by a double fixed support and on the other one by a sliding support, which can be removed for the setting / disassembling of the tools Technical data: Max workpiece length 1300 mm Min workpiece length mm 300 Min workpiece width mm 60 Max workpiece width mm 350 Min/max workpiece thickness mm 2/50 Spindle motor 22 Kw Tool-holder spindle dimensions Ø 80 x 1310 mm Spinde speed 4000 rpm Advancement speed from 5 to 30 m/min' (up to 30 pieces/minute of productivity) Working table height 990 mm Max tools diameter 275 mm - Blade bore mm 80 Projection of the tools from the working table, adjustable from 27 to 47 mm with tools Ø 250 mm or from 40 to 60 mm with tools Ø 275 mm max Max milling depth 12 mm with mills Ø 180 mm - 22 mm with mills Ø 200 mm Total installed power Kw 25 Suction port diameter mm 200 Compressed air 7/8 bar Machine dimensions mm 2100 x 2260 x 1500 h Machine weight 1850 Kg. approx. Dedevtrk Nopfx Ah Uswd

Condition: excellent (used), working width 230mm working height 120mm 6 heads heads set: bottom/right/left/top/top/bottom spindles speed 6000 rpm variable feeding speed adjustment to 30m/min Dsdopccy Ajpfx Ah Uswd pneumatic pressure of feeding rolls POWERCOM Controll infeed table length 2470mm