Clamping trolley

WEISS

Condition: used, Weiss sharpening machine for sharpening small and medium-sized circular saw blades. The machine is mounted on a workbench. Fsdpfxszrx H Do Al Uepn Technical data: - Saw blade diameter: max. approx. 600 mm

Year of construction: 1982, condition: used, In Good Condition Fsdpfx Aedq Ug Ijl Ujpn

Condition: used, Year of construction: 2002, Power 18.5kw Rotor 600mm Opening 100cm/100cm Hours : 2677 Fedpfxoz Ihw Uj Al Ujpn 380V

Condition: good (used), Weiss climate testing chamber with seat pulsator Manufacturer: Weiss Type: SD 1400/+20 DU Test chamber: Material: Stainless steel Dimensions: Height approx. 800 mm Width approx. 2000 mm Depth approx. 900 mm Volume: 1440 liters Outer housing Material: Double-coated Zincor sheet Dimensions: Fpodpfx Aexbgrgel Usn Height approx. 2000 mm Width approx. 2200 mm Depth approx. 2000 mm H x W x D 2000 x 2200 x 2000 mm Paint finish: Light grey (RAL 9002) Door, double-leaf: Hinged on the left and right Equipment: Pass-through in the floor and ceiling: 2 each, DN 100 mm, for inserting the pulsation tables Pass-through in the side walls: 1 each, left, right, 100 mm Refrigeration unit: Air-cooled Control: Digital measurement and control system DMR Basic control panel: Integrated into the main switch panel Interface: RS 232 C, for connection to a PC Software: Operating software for MS-Windows Performance data: Temperature range without climate control: +20...+100 °C Temperature stability without climate control: +0.2 … +0.5 K (time-dependent) depending on the range, in the steady state Temperature range with climate control: 20...+95 °C Temperature stability with climate control: +0.2 … +0.5 K (time-dependent) depending on the range, in the steady state Dew point range: 20...+94 °C Humidity range: 10...98 % RH Humidity stability: +3 ... +5 % RH, depending on the range, in the steady state Temperature change rate measured in the outlet without a test specimen and without a load - Cooling: 0.5 K/min. on average, between +100 and +20 °C - Heating: 0.5 K/min. on average, between +20 and +100 °C The performance data refer to an ambient temperature of max. +25 °C and the specified rated voltage For trouble-free operation of the system, the ambient temperature must be between +10 and +35 °C Connections / Other Protection class: IP 32 for the control cabinet Sound pressure level during free-field measurement at a distance of 1 m in front of the device: 60 dB (A) Humidification water: fully demineralized, conductivity max. 20 μS/cm, pH value 6 - 7, automatic topping up Condensate drain: back-pressure-free, 3/4" hose connection Power connection: 400 V; 3 PH+N PE; 50 Hz Connected load: max. 10 KVA Weight: approx. 1160 kg Seat testing device with steel structure for mounting and securing to the climate testing chamber, including: • 2 pneumatic weight lifting devices (150 mm stroke) for test specimen change, 12 weights each weighing 5 kg • 1 base frame in normal steel welded construction for attachment to the underside of the climate testing chamber. This frame is provided on all sides with removable sheets and has 2 folding doors for adjusting the eccentricity. These doors have safety switches. • 2 eccentric disks with bearings and tachometer, 2 connecting rods, 2 ball guides • 2 mounting tables, perforated, 20 mm grid, 650 x 650 mm, for connecting the test specimens, made of aluminum, thickness min. 10 mm • 2 mounting plates, perforated, 20 mm grid, 200 x 200 mm, for connecting the buttocks replica • 2 load rods, 600 mm long, made of stainless steel (The connection to the test specimen is not included in our price, but can be offered subsequently after a precise definition) • 2 three-phase motors, 2 belt drives with tensioning devices • 1 pneumatic control system with 2 manual valves, one filter-regulator unit and one shut-off valve, 1 electrical control cabinet with 2 SEW frequency inverters, hand switch, emergency stop button, 2 push buttons,

Condition: used, Year of construction: 2005, No. 3256 CNC machine for pallet production Sysmathick RPA9 + stacker Used, year of construction 2005, machine already dismantled Machine for assembling wooden parts with top and bottom nailing The RPA9 is a machine with circulation chains for the production of pallets in standard dimensions according to four templates (maximum 1600 x 1400 mm LW) Operation via a touchscreen Format changeover within a few minutes Two programming methods: - digital programming via PC (input of coordinates) - Manual programming via touch screen Storage of tens of thousands of products Automatic control of the distance between the heads (minimum 290 mm) Positioning accuracy +/- 1 mm High adjustment speed (1 m/s) Bridge with nine nailers (top 3x N58 & 3x N400, bottom 3x N80) High nailing frequency (one row of three nails per second) Nailing of multi-level pallets thanks to the heads Equipped with pneumatic cylinders Pneumatic pressing of the boards during assembly Minimum pallet dimensions 600 x 300 mm LW Maximum pallet dimensions 1600 x 1400 mm LW Maximum template dimensions 1700 x 1600 mm LW Maximum nailing capacity 1600 x 1400 mm LW Maximum pallet height 190 mm Minimum pallet height 110 mm Machine capacity 60 - 200 pallets/hour Sale on behalf of customer, ex location near 51371 Leverkusen, without dismantling, without transport and assembly Dismantling, loading and transport by us optionally possible Fpedex Dddxepfx Al Uen Errors in description and price excepted To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: excellent (used), Weiss SC 1000/+20IU Corrosion Climate Cycle Test Chamber Weiss SC 1000/+20 IU Corrosion Climate Cycle Test Chamber Fpodpfx Aoph U Dhol Uon The test system is a combination of a climate testing chamber with variable temperature and humidity and a corrosion testing chamber with a salt spray test. In a time-lapse mode, vulnerable metallic components are tested for corrosion according to the relevant standards. Temperature operating range: Temperature: +20 °C ... +60 °C Time-dependent temperature deviation: +0.5 K Climate operating range: Temperature: +20 °C ... +60 °C Time-dependent temperature deviation: +0.5 K Relative humidity: 10...98 % RH Time-dependent humidity deviation: 3...5 % RH Dew point: +12 °C ... +59 °C Salt spray test SS (temperature range: ambient temperature +5 K ... +50 °C) according to DIN 50 021 (salt spray with a two-nozzle system, 1.5 x 0.5 mV80 cm? h) Control: Digital measuring and control system SIMCON/32*-Net with touch panel Interfaces: serial interface RS 232 C, parallel printer interface Operating modes adjustable via process controller: - Temperature control - Climate control - Salt spray test - Direct spraying with salt solution - Condensation load - Flushing of test chamber walls - Drying/ventilating the test chamber Temperature sensor: Pt 100 resistance thermometer Humidity sensor: psychrometric fresh measuring system tft’ (with forced humidification) Technical data SC 1000/+20 JU Usable space dimensions: Height up to roof slope approx. 1000 mm + Roof approx. 350 mm Width approx. 1100 mm Width between the heaters approx. 1000 mm Depth approx. 1000 mm Test chamber door made of glass, left-hinged Height approx. 1350 mm Width approx. 1000 mm External dimensions including unit components and control cabinet Height approx. 2100 mm Width approx. 1450 mm Width with touch panel approx. 1700 mm Depth approx. 2600 mm Maximum floor load: 100 kg Brine storage tank: approx. 200 l, with level monitoring, located separately to the side/behind the unit Height approx. 1000 mm Width approx. 600 mm Depth approx. 900 mm Electrical connection: 400 V Connected power: 13 kW Weight: 1300 kg You can find more items - new and used - in our shop! International shipping costs on request!

Year of construction: 1990, condition: good (used), Weiss temperature test chamber WT 11-18 KWP 500/40 Spring, summer, autumn, and winter – your products must be able to withstand different temperatures during manufacturing, transport, storage, and use. The temperature test chambers from Weiss Technik help you to test the influence of thermal conditions on the properties, function, and service life of your products. Manufacturer: Weiss Technik Type: KWP 500/40 - 180 DU Designation: WT 11-18 Type: Temperature test chamber Test chamber volume: 500 liters Temperature range: -40°C to +180°C Fjdpfx Alsh Izh Ij Uopn External dimensions: 110 cm wide, 173 cm deep, and 204 cm high Internal dimensions: 80 cm wide, 85 cm deep, and 85 cm high Pressure: 25 bar Voltage: 380 V Frequency: 50 Hz kVA: 4.7 Refrigerant: R 502 Year of manufacture: 1990 Condition: used Complete factory closure, large selection of storage platforms, pallet racks, shelving systems, paternosters. High-quality industrial machines, lathes, grinding machines, hand tools. You can find more items – new and used – in our shop! International shipping costs on request!

Condition: used, Trimming saw Esterer DKE Passage width: 600 mm Passage height: 160 mm with 22 kW drive motor including spare saw blades including spare templates Fedpfxoy Da Hfs Al Uspn Location: Germany, near Chiemsee

Year of construction: 1988, condition: used, For sale is an environmental simulation system / climate testing system from WEISS Umwelttechnik GmbH, type 64/80-130DU. Technical data: Manufacturer: WEISS Umwelttechnik GmbH Type: 64/80-130DU Device No.: 221/11506 Year of manufacture: 1988 System No.: 99663 Wiring diagram No.: 99662 Refrigerant: R404A – 0.8 kg Refrigerant: R23 – 0.8 kg Low-pressure max.: 18 bar High-pressure max.: 25 bar Operating pressure: 16 bar Fjdpfx Ajz Izwnol Uepn Electrical connection: 3/N/PE AC 400 V ±10 %, 50 Hz Rated power: 1.3 kVA Rated current: 60 A Service No.: 44985 Description: Robust environmental simulation or climate testing system from WEISS Umwelttechnik for performing tests under defined climatic conditions. The system comes from an industrial setting and is particularly suitable for use in development, quality assurance, and testing technology.

Condition: used, Year of construction: 2020, operating hours: 21,398 h, machine/vehicle number: IntNr231185, EMAG WEISS W11 CNC SL650 – Universal Cylindrical Grinding Machine – Year of Construction: 2020 For sale is a used EMAG WEISS W11 CNC SL650 – a high-performance universal cylindrical grinding machine with CNC control. This machine is ideally suited for demanding grinding operations on individual parts, prototypes, and small to medium production runs. Machine Specifications Manufacturer: EMAG WEISS Type: W11-CNC SL650 Year of Construction: 2020 Operating Hours: Approx. 8,850 spindle hours / approx. 22,000 power-on hours Condition: Used, well-maintained, ready for immediate operation Technical Data Control: CNC-controlled (e.g., Heidenhain / Siemens / Fanuc – depending on the configuration) Max. Grinding Length: 650 mm (between centers) Center Height: Approx. 200 mm External Grinding Diameter: Up to approx. 390 mm Max. Workpiece Weight (overhanging): Approx. 100 kg (MK4) Max. Workpiece Weight (between centers): Approx. 250 kg X-Axis Traverse: Approx. 380 mm Z-Axis Traverse: Approx. 1,150 mm Grinding Wheel Diameter: 400 – 500 mm depending on equipment Rated Power: 9 – 11 kW (approx. 12 – 15 hp) Peripheral Speed: 20 – 50 m/s Fodpfx Asz E Rbdel Uepn Equipment and Performance Features CNC touchscreen operation with Windows-based interface – user-friendly programming via dialogue or DIN/ISO (optional) Two-in-one concept: The machine can be operated both conventionally and CNC-controlled. High-precision linear and ball screw guides for high accuracy Direct measuring system (glass scales) (optional on many machines) Automatic dressing of the grinding wheel with compensation Crash control & gap monitoring for machine and process safety Coolant system, emulsion separator, and chip conveyor available (depending on equipment) Preparation for automation / robot interface possible The machine can be inspected in operation by appointment. Subject to changes and errors in technical data and specifications as well as prior sale!

Condition: used, Frame Saw Esterer LSH Year of Manufacture: 1968 Clearance: 65 cm 500 mm stroke Oscillating frame Automatic overhang adjustment Hydraulic roller lifting With splitter wedge With drive motor With gear transmission With saw blades With hydraulic saw tensioner With suspension system With templates With log carriage Weiss HdT-L, Year 1996 (can also be sold separately) The machine has been out of operation for quite some time and should be thoroughly checked and overhauled. Location: Austria, near 8700 Leoben Fpjdow Dn S Aopfx Al Usn

Year of construction: 1997, condition: excellent (used), Safety workbench Manufacturer: WIBO Weiss Type: Jekt TCRJO 180/98 with stepped design made of stainless steel Work area: Depth: 920 mm Height: 1200 mm Width: 1800 mm Fpsdpfx Aehk St Ajl Uen Working height: 600 mm Overall dimensions: Depth: 1080 mm Height: 2100 mm Height with dust extraction: 2550 mm Width: 1800 mm

Condition: excellent (used), Weiss WK3-340/70 Climate Test Chamber Manufacturer: Weiss Umwelttechnik GmbH Type: WK3-340/70 Machine Type: Climate Test Chamber / Temperature and Humidity Test Chamber Test Chamber Volume: approx. 335 liters For sale is a used Weiss WK3-340/70 climate test chamber with programmable touch panel control. The unit is suitable for temperature and humidity tests, environmental simulation, material testing, electronics and component testing, quality assurance, as well as development, aging, and stress tests. Technical Data: Temperature range: -72 °C to +180 °C Cooling rate: approx. 3 K/min Heating rate: approx. 3 K/min Climate range: +10 °C to +95 °C Humidity range: 10 to 98 % RH Dew point range: -3 °C to +94 °C Fpsdpez A A T Hofx Al Usn Test chamber volume: approx. 335 liters Refrigerant: R404A / R23 Refrigerant quantity: 2.5 kg / 0.55 kg Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 5.5 kW Rated current: 16 A Dimensions: Internal dimensions (H × W × D): approx. 750 × 580 × 765 mm External dimensions (H × W × D): approx. 1,775 × 870 × 1,600 mm Equipment: Programmable touch panel control Temperature and humidity control Air-cooled design Stainless steel interior Large viewing window Test chamber lighting Specimen port on the right, NW 125 mm Specimen port on the left, NW 85 mm Stainless steel inserts Adjustable feet Program and manual operation Shipping Information: Dimensions (H × W × D): approx. 1,775 × 870 × 1,600 mm Weight: approx. 585 kg Shipping via freight forwarder possible Condition: Used Optical condition as shown in the pictures. Scope of delivery: Weiss WK3-340/70 climate test chamber Touch panel control Stainless steel inserts as shown in the pictures Accessories as shown in the pictures Availability: by arrangement. Scope of delivery as shown in the pictures. Subject to changes, errors and prior sale.

Condition: used, Costa multi-blade saw -Type Lince Fodsvw Rpljpfx Al Ujpn -max. cutting height 140mm -motor 30kW

Condition: used, External dimensions (L x W x H) 3,000 x 850 mm x 1,970 mm, Internal dimensions (L x W x H) 1,990 x 750 mm x 1,400 mm, Usable area 1.5 m², Growth height 1.4 m, Fjdpfx Alez Eup Es Uopn Temperature range from approximately 5°C to +45°C, Adjustable humidity from 40% to 95%, 2 units in stock.