Extrusion press

WINTER MHB-1531 AUTOMATIK

Condition: used, Year of construction: 2001, functionality: fully functional, saw blade diameter: 450 mm, cutting height (max.): 100 mm, cutting width (max.): 245 mm, working height: 100 mm, type of input current: three-phase, – Year of manufacture: 2001 – Optimization – Cutting to line – The machine has additional tables, allowing a maximum cutting length of up to 6500 mm; currently reduced to 3400 mm – 8 cutting beams TECHNICAL SPECIFICATIONS: – Max. cutting length: 6500 mm (currently 3400 mm) – Min. element length: 300 mm Bjdpfx Aswtzrhog Iecw – Max. cutting height: 100 mm – Max. cutting width: 245 mm – Blade diameter: 450 mm – Motor power: 9 kW – Max. feed speed: 120 m/min – Acceleration: 10 m/s2 – Optimization according to length and value – Pneumatic material clamping – Five ejection units – Intelligent, controlled waste chute – Vario speed system – Total length: 17,500 mm – Transport dimensions (L/W/H): 800 / 245 / 220 cm – Weight: 3,500 kg

Condition: new, Year of construction: 2026, Recirculating Chamber Furnace, electric, new unit, delivery time 12 weeks - Maximum temperature: 250°C - Internal dimensions (W x D x H): 2100 x 2100 x 2000 mm - Volume: 8,820 liters - Control: Eurotherm Nanodac Controller/recorder with color touchscreen display - 2 pcs. recirculation fans - Double doors with safety door sensors - Overtemperature protection: Eurotherm 3216i Bcjdpov Hg Eujfx Ag Iew - 2 pcs. fresh air fans - Automatic dampers - Electrical design: 400 V / 50 Hz / 3NPE - Increased heating capacity approx. 70 kW - Temperature accuracy: +/- 6 K in an empty oven - Documentation, CE certificate of conformity - Electrical circuit diagram with spare parts list Note: The oven floor is not insulated but fitted with stainless steel sheet. This allows unrestricted entry for all track widths. Alternatively, an insulated floor can be offered (with customer-defined entry rails). We offer new and used industrial furnaces, which we can also retrofit and upgrade according to customer requirements. Furnace, ovens, drying oven, industrial oven, drying cabinet, heat oven, heat cabinet, recirculating oven, chamber furnace, heating oven, chamber recirculation oven, tempering oven, annealing oven, temper oven, annealing oven.

Condition: good (used), Year of construction: 2006, I sell the automatic pneumatic end cutting saw Weinig Grecon Dimter Opticut 200 Elite Year 2006 Motor power 7,5kW Input table automatic feeding 4,10m (throughfeed system) Outut table automatic 6 pcs. kickers on right outfeed table Bodpfx Agjxtxi Ie Iocw Optimising with mistakes deffect reading and automatic cutting sequence modes. Available immediately. CE version. Documentation included.

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 1 h, functionality: fully functional, total length: 2,150 mm, total width: 1,000 mm, total height: 1,550 mm, type of input current: three-phase, overall weight: 700 kg, workpiece weight (max.): 500 kg, input voltage: 400 V, feed rate X-axis: 30 m/min, conveyor belt width: 400 mm, power: 2 kW (2.72 HP), input frequency: 50 Hz, SA250 or SA380 profile sanding machine for glazing bars, boards, beams and more. Bedow Av Ivjpfx Ag Iscw The SA380 brush sanding machine offers the following advantages: 1. Flexible: All profiles, including beams up to 400 mm wide and 260 mm high 2. Mobile: Mounted on wheels and can optionally be equipped with a mobile extraction system 3. Powerful: Automatic feed of 13–30 m/min ensures high throughput 4. Top results: 8 axes with flexible Fladder brushes deliver a perfect finish: 4 sand WITH and 4 sand AGAINST the feed direction (on 4 sides, 2 per side) 5. Safe: Completely enclosed design, requiring only a single 120 mm dust extraction connection The SA250 and SA380 are built to be extremely robust and are manufactured entirely in Denmark. We currently have two demonstration machines in stock.

Condition: used, Year of construction: 2006, Weight 3800 kg Sawing width 310 mm Sawing height 110 mm Electric motor 90 kW Infeed and out feed conveyors for 4m lenghts Bcsdpfxetmzmdj Ag Isw

Condition: excellent (used), Year of construction: 2012, WALTER WD 250/350 30 and 37 kW shaft multisaw – Polish production – year of manufacture 2012 – DTR and CE TECHNICAL PARAMETERS: cutting height 170 mm cutting width 350 mm spindle diameter 2 x 70 mm diameter of circular saw blades 300 mm spindle motor 30 kW and 37 kW feed motor 1.5 kW seven lower pulling rollers two upper toothed pulling shafts Bsdemv Elpopfx Ag Ijcw length of the feeding table 3000 mm spigot diameter belt collecting waste from under the machine 2 x 200 mm dimensions (length / width / height) 320 / 200 / 200 cm weight 2000 kg

Condition: refurbished (used), pull-out unit Bcjdpfxonvf Tbo Ag Iew Roller width 180 mm 2 powered rollers below 2 without drive above

Condition: excellent (used), Year of construction: 2011, Thomas Pettersson (Sweden). Fully automatic compact high speed planing line 150m/min !!! Bcjdpfx Agjth Taas Iew High performance handling system suitable for use with a moulder, double end tenoner etc. consisting of the following. 1. Pack infeed system, roller and chain conveyors, 5m + 3,8m. 2. Robot layer feeder (4 layers per minute) with automatic stick collector. 3. Crossfeed system with end trimmer saws (angle adjustable), 22 cycles 400mm wide per minute.. 4. Moulder infeed (right side with adjustable fence line) with 4 feed roller accelerator 150m/min maximum speed, 5. Infeed belt with side pressure to fence. 6. Outfeed belt 5m long. 7. Board sweeper to stacker capable of stacking 80pcs/min. 8. Automatic stacker with stick magazines, 1200mm high packs, 9. Magazine for automatic loading of pallets to outfeed, holding 10 pallets. 10. Outfeed roller conveyor, 5m long.. 11. Control system with remote panels. This high speed fully automatic line could be used for feeding a moulder, resaw, multi-rip etc. It could be modified to suit feeding a double end tenorer etc also. If you need a highly efficient, compact, labour saving handling system for lengths up to 2.1m then this could be the equipment for you. Very suitable for doors, windows, furniture, specialist packaging etc. Inspection is very welcome.

Condition: used, Used Lödige model FKM1200D stainless steel ploughshare mixer. Manufacturer: Lödige Model: FKM1200D/2MZ/2ZF Material: Stainless steel Capacity: 360-840 litre working capacity, 1200 litre total capacity (product dependent) Mixing Chamber: 1700 mm long x 950 mm diameter Discharge Type: Pneumatically Operated Bomb Door Style Discharge Valve Type Of Blades: Stainless Steel Shaft with Ploughshare Blades Motor: 25/36 kW, 730/1465 rpm, 380 V electrical motor with gearbox Bsdpsx R S Ubjfx Ag Iscw Also Includes: - 2 stainless steel side wntry choppers direct driven by 7.5 kW, 2930 rpm, 380 V motors. - Control panel - controls mixing time, start/stop mixing blades, start/stop choppers, open/close inlet valve, open/close outlet valve.

Condition: excellent (used), Max working width 9000 mm Bcodpexnwpijfx Ag Iow Max working height 1100 mm 6 upper pressing sections, each 1520 mm 18 front clamps Overall width 13000 mm Overall height 2200 mm