Micrometer, micrometer screw
Osfq3m3
-Manufacturer: WMW
-Measuring range: 200-300 mm
-One revolution of the drum corresponds to: 0.5 mm
-with: locking device
-Measuring force: ratchet
-Setting mass
-Hand protection
-Also other sizes: available
-Number: 2x micrometers available
-Price: per piece
-Weight: 3.5 kg
brinell hardness 260 mm
rockwell hardness 220 mm
Bfqb2h9odh
throat 150 mm
micro head enlargement 70-fach
187,5 kg
checking height max. 250 mm
weight of the machine ca. 0,25 t
machine for single tests according to Vickers and
Brunell, with projection-measuring unit on machine head, electronic load-time
adjustment,
shock-resistant
loading via angled suspension, very good condition
Software: ATOS v7.5
Stand height: 1.8 mm
Arm: 0.9 mm
Swivel head: Foba Superball M-1
Notebook: Dell Precision M4700
Equipment:
1x silver license key
1x remote control
Rfvudeu
1x original notebook
1x bag with PC
1x stand
2x suitcase
3x folder
cycle time 0 sec
workpiece dia. 200 mm
workpiece length 2000 mm
total power requirement 0 kW
weight of the machine ca. t
Rck3hnto0
dimensions of the machine ca. m
Electromagnetically actuated single-ring multi-plate clutches. Nominal torque moment upon clutch size. See attached document.
Description of ELS clutches and their advantages:
The ideal solution for automatically controlled machines and production lines.
Relatively high level of transmitted moment concerning the size of the clutch.
The compact design enables smaller size and lower weight of the driving unit.
Fast grow increase of the torque moment to the nominal value
A low residual moment afte...
Product description
Execution:
Inikt7x
3-point XT inside micrometers. Measuring spindle hardened and ground. Measuring drum with deep black scale, all reading parts matt chrome-plated. Sensing ratchet for even measuring force. All devices are provided with serial number and test report.
Application:
Bottom hole and through holes, centering edges.
Used well preserved steel platform for vibration damping / vibration decoupling of measuring machines of the brand Bilz. The system was manufactured in 2017 to operate an automated optical measuring machine type: GOM ATOS ScanBox 5108 with low vibration.
It is also possible to operate other measuring machines with this system, e.g. a ScanBox 5120 without housing or tactile measuring machines.
The system has an active damper control. 4 Bilz BiAir 2 ED shock absorbers keep the entire plate virtua...
Product description
Ogcfl
Execution:
3-point XT inside micrometers. Measuring spindle hardened and ground. Measuring drum with deep black scale, all reading parts matt chrome-plated. Sensing ratchet for even measuring force. All devices are provided with serial number and test report.
Application:
Bottom hole and through holes, centering edges.
For roller conveyors up to 500mm width
2m measuring length, precision linear guide
Fine adjustment 0.1 mm, digital display on 0.1 mm
Material stop swivelling, manual free lifting device
Stops spring-damped
Pneumatic free lifting device
Po2tgczp
Product description
Execution:
3-point XT inside micrometers. Measuring spindle hardened and ground. Measuring drum with deep black scale, all reading parts matt chrome-plated. Sensing ratchet for even measuring force. All devices are provided with serial number and test report.
"Micro" - version with improved resolution of 2 µm.
Application:
Bottom hole and through holes, centering edges.
Bml8gcn7ri
For roller conveyors up to 500 mm width
Automatic precision measuring stop with NC control; 2m measuring length; linear guide; positioning accuracy 0.1 mm via servo motor; position detection via contactless measuring system; pneumatic clamping; pneumatic lifting and lowering after each cut; free travel function;
Pre-switch-off only with roller conveyors
Bjneqi8fr7
Extension per 1000 mm
Product description
Execution:
Bml7ughl9m
3-point XT inside micrometers. Measuring spindle hardened and ground. Measuring drum with deep black scale, all reading parts matt chrome-plated. Sensing ratchet for even measuring force. All devices are provided with serial number and test report.
"Micro" - version with improved resolution of 2 µm.
Application:
Bottom hole and through holes, centering edges.
For roller conveyors from 700 mm width
Positioning via servo motor, manual movement keys, free movement and pneumatic lifting and lowering after each cut, piece counter
2rxecm
Accuracy +/- 0.1 mm/m
including pre-connection
Changeover from rapid to creep speed in conjunction with driven roller conveyors
Stop extension for short parts
For roller conveyor with 500/700 mm width
Positioning via servo motor, manual movement keys, free movement and pneumatic lifting and lowering after each cut, piece counter
Accuracy 0.1 mm/m
including pre-connection
Bjnols0f09
Changeover from rapid to creep speed in conjunction with driven roller conveyors
CNC control for a Sheffield Discovery D12
Bib9lnzjhr
including hand box
Z-axis servo is burned out, the rest still works
Can also be sold in parts (hand box 600,--, control € 600,--)
For roller conveyors from 700 mm width
Positioning via servo motor, manual movement keys, free movement and pneumatic lifting and lowering after each cut, piece counter
Accuracy +/- 0.1 mm/m
including pre-connection
N3fdd
Changeover from rapid to creep speed in conjunction with driven roller conveyors
Vertical straightness adapter, vertical straightness adapter, 3D coordinate measuring machine, 3D coordinate measuring machine, measuring probe, probe, 3D probe, stylus insert
Tgci2dwp
-Handover in current condition as viewed
-Transport dimensions: 80/125/H90 mm
-Weight: 0.4 kg
Spare parts from a Jena ZKL laser interferometer:
2 pieces triple reflection prism each € 250,--
1 pc angle measuring optics (double prism and interferometer) € 1.000,--
1 pc AUK500 Weather Station € 1.000,--
also available separately
Yshafk
For roller conveyors up to 500mm width with scale and vernier, free wheeling device swivels
accuracy (+/- 0.15 mm/m)
7afyku0
Measuring range: 2000-6000 mm
The Machineseeker Trust Seal gives buyers the opportunity to see, at a glance, whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Check the address of the dealer
Validation of Bank connection
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal in your advertisements on Machineseeker. In this way, you signal to every potential buyer the seriousness of your company, checked by an independent body. This creates buyer confidence and increases the probability of successfully selling machines. In addition, you have the option of including the Machineseeker Trust Seal on your homepage and in business letters.