Used band saws for sale (149)

Condition: not inspected (used), Year of construction: 1984, Connected load 380V 9A Motor power 4kW Cutting height 460 mm Cutting width 770 mm Extraction 120 mm Height of the machine approx. 2500 mm Bsdpfxovt Ttlo Akxsdb Panhans band saw guide above and below Saw blade length 5700 mm

Condition: good (used), Year of construction: 2001, total height: 2,100 mm, roll diameter: 600 mm, saw band length: 4,500 mm, Cutting height 300 mm Cutting width 570 mm Table size 610x700 mm Extraction 120 mm Band saw guide above and below Stop Bdsdpfxovt Sxgo Akxeb Total height of the machine approx. 2100 mm

Condition: reconditioned (used), Year of construction: 1982, machine/vehicle number: 270018, functionality: fully functional, Connected load 380V 6,6A 3kW band saw length 5110 mm fence suction 100 mm machine table tiltable with hand wheel Bjdpfx Aeh Uxq Tjkxodb Foot brake

Condition: excellent (used), Saw wheel diameter 800 mm Max. Cutting height 520 mm Max. Cutting width 780 mm Table height from floor 970 mm Bedpfjtrdk Dsx Akxedb Table dimensions 1170×800 mm Max. min. belt length 5670/5540 mm Max. Belt width 45 x 0.7 mm

Condition: refurbished (used), Year of construction: 1975, functionality: fully functional, CANALI Vertical Automatic High-Performance Block Bandsaw Model BBS.V "PACIFIC" K/L-B-P 1800, Type 555, Year 1975 with operator control system in the cabin, Bandsaw wheels Ø 1800 mm, bandsaw wheel width 280 mm, Max. saw blade width 310 mm. Bandsaw blade length 11,500 mm Round timber infeed approx. 20 m long, four strands with inserter Block carriage with ejector onto block transverse conveyor CANALI pneumatic log carriage Type 501.09 with 4 clamping claws, 3 log turners, 4 ejectors Drive power 100 kW, carriage speed 5-120 m/min. driven roller conveyor with side board removal with brush, lifter with stripper for cut-out removal Roller conveyor approx. 12 m with lifting stripper for manual stacking Stacking device with turning unit for bundle packaging Lowerable bundle with transverse bundle conveyor Bdsdpexvrnijfx Akxob Complete electrical control cabinets Full band saw blade sharpening equipment

Condition: used, Raimann Bdjdpfx Aoh Icuxekxjb Band saw with feed

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, power: 15 kW (20.39 HP), type of input current: AC, saw band width: 50 mm, Width of saw 50mm Bsdpfxeq Hhlus Akxsdb Width between rollers 90cm Wheel diameter 62cm Main motor 15 kW Full hydraulics

Condition: excellent (used), Overall dimensions Length 4500 mm Width 1900 mm Height 1750 mm Feeder table height 860 mm Weight 1100 kg Workpiece dimensions Height 280 mm Width 300 mm Bedpfxow R E S Ej Akxsdb Length from 500 to 3000 mm Power supply 400 V (3-phase) Feeder feed Variable, controlled by frequency inverter Feed speed 4-13 m/min Main belt feeder width 200 mm Pulley diameter 600 mm Saw blade parameters Length 4000 mm Width 30 ÷ 42 mm Thickness up to 1.1 mm Workpiece hold-down spring-loaded Cutting thickness adjustment manual Hourly output up to 3 m³

Condition: new, Year of construction: 2025, Band saw BS940RS3"SP V400/3/50 HP 20 CE CE VERSION Manual blade tensioning Standard equipment Self-braking motor 400 V/3/50 Reinforced twin-column base Steel blade tensioning system with guide lubrication system Front emergency stop activated via cable Rear emergency stop button Robust flywheels (1/3 crown in front) without rubber Bronze scrapers on flywheels Gravity blade lubrication system with felt pad Automatic star-delta starter Blade tension indicator Rack-and-pinion blade guide elevation with integrated blade guard Blade width: max. 90 mm Blade is not included This configuration includes: - Upper and lower blade guides with bronze side elements; - Three-phase 400V/50Hz/20HP self-braking motor; Bjdoxzu Nmjpfx Akxsdb - Horizontal transport pallet FEEDER RA260 ELP (SR026) V400/3/50*CE WE VERSION Pneumatic control – Electronic variable speed drive

Condition: new, Year of construction: 2025, Wheel diameter: 640 mm Cutting height: 400 mm Cutting width to the left of the sawblade: 620 mm Precision guides at the top and bottom Table tilts up to 15° Max. sawblade length: 4780 mm Bdsdjwi Ez Eepfx Akxsb Weight: approx. 320 kg Dimensions: approx. 1050 x 720 x 2180 mm (L x W x H)

Condition: new, Year of construction: 2025, for saw blades Width: 38 to 170 mm Length: 4,000 - 8,000 mm Bjdpfxexz E Uaj Akxodb Also suitable for detecting bent teeth.

Condition: new, Type 800 Motor power 4.5 kW, 1450 rpm Blade length 5611 mm Blade width 19-50 mm Blade speed 18 m/s Throat / max. cutting width 800 mm Max cutting height 470 mm Table dimentions 840 x 500 mm Bjdjd Av Dujpfx Akxedb Tilting table 0°- 45° Dust port diameter 2 x 100mm

Condition: new, Type 500 Motor power 3 kW, 1450 rpm Blade length 4100 mm Blade width 19~38 mm Bdedpfxodzttae Akxjb Blade speed 18 m/s Throat / max. cutting width 500 mm Max cutting height 350 mm Table dimentions 730 x 480 mm Tilting table 0°~ 45° Dust port diameter 2 x 100mm

Condition: new, Type 600 Motor power 3.5 kW, 1450 rpm Blade length 4590 mm Blade width 19~38 mm Blade speed 18 m/s Bdedpfx Ajdzttfokxsb Throat / max. cutting width 600 mm Max cutting height 430 mm Table dimentions 780 x 480 mm Tilting table 0°~ 45° Dust port diameter 2 x 100mm

Condition: new, Type 700 Motor power 4 kW, 1450 aps/min Bsdpod Av Dmsfx Akxsdb Blade length 5020 mm Blade width 19-50 mm Blade speed 18 m/s Throat / max. cutting width 700 mm Max cutting height 430 mm Table dimentions 790 x 500 mm Tilting table 0°- 45° Dust port diameter 2 x 100mm

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, RADIAL ARM RESAW – STENNER ST 100 R The machine is equipped with: • A pressure guide system with easily replaceable guides that require no adjustment or calibration • Electronic interface with digital readout of the feed unit position • Multi-roller feed unit enabling cutting at angles of up to 35 degrees • Pneumatic saw blade tensioning • Blade and pulley cleaning system with integrated lubrication feed Bdjdpfx Aswnyamskxob • Continuously adjustable feed speed from 5 to 60 m/min • Main drive motor with 15 kW power and automatic star/delta starter, featuring two emergency stop buttons • Manual positioning of the feed roller • Pneumatic roller movement activated by a photocell TECHNICAL DATA Working table height: 955 mm Pulley wheel diameter: 915 mm Cutting capacity: width 510 x 400 mm Distance from roller feed unit to saw blade: max. 305 mm Distance from feed rollers to saw blade: max. 230 mm Band saw specifications: Maximum length: 5545 mm Minimum length: 5465 mm Maximum width: 100 mm Machine dimensions: 1.8 m x 1.1 m x 2.38 m Machine weight: 1650 kg

Condition: used, 900 band saw with 5 hp motor, used. Bedpfx Aowtl S Sekxsdb

Condition: used, Primultini cast iron band saw with 100 cm flywheel and tilting table, maximum useful board passage 90 cm. 10 HP motor power. Used. Bodpfx Ajtq Dl Tokxodb

Condition: used, Year of construction: 2002, SECOND-HAND COPYING BAND SAW MZ MOD. UNIVERSAL 013 - CE RULES - Motor Hp 7,5 - Wheel diam. 840 mm. - Copying device Bdsdemzbl Tepfx Akxeb - Max cutting length 1300 mm - Max cutting height 100 mm - Cutting angle +- 45° - Waste conveyor belt SMA - S/N 08 - Year 2002

Condition: used, Year of construction: 1996, machine/vehicle number: 008037280596, SECOND-HAND BAND SAW SICAR MOD. TOP9 Bdjdpfx Akewr Ek Ejxob - 900 MM - YEAR 1996

Condition: used, Double Band Saw for Small Logs The machine is designed for cutting small logs of various sizes, up to a maximum diameter of 400 mm. For this machine, increased to 550 mm! Minimum log length: 1000 mm. Model still produced under the name ARTIGLIO SDE80 - SD100 - SD110 - SD115 - SD130 - Very robust steel frame - Mechanical blade tensioning device - Constant blade tension and guidance Bdsdpfxsxwk I Do Akxjb - Manual oscillation of upper flywheels - Powerful oscillation of lower flywheels - Fully analog control cabinet operating the infeed and outfeed conveyors - Pneumatic clamping and pressing of workpiece logs - Electronic device for measuring cutting thickness (cant width) with 5 preset sizes - Movement of components via gear motor with frequency inverter - Log self-centering on feed system components - Log secured by heavy-duty spiked rollers - Standing operator control station - Automatic loading and unloading systems Technical data: - Flywheel diameter: 800 mm - Flywheel width: 75 mm - Blade width: 75–80 mm - Blade thickness: 0.8 mm - Blade length: 5700 mm - Motor power: 2 × 15 kW - Min. cant thickness: 60 mm - Max. cant thickness: 400 mm - Max. cutting height: 550 mm

Condition: excellent (used), total height: 2,075 mm, saw band length: 4,650 mm, saw band width: 35 mm, Centauro CO 600 Roller diameter: 600 mm Cutting height: 360 mm Cutting width: 580 mm Table dimensions: 810 x 580 mm Band length: 4650/4550 mm RPM: 715 Bdodpeu Uictjfx Akxeb Required space (LxWxH): 1165 x 760 x 2075 mm Motor power: 2.2 kW Condition: as new Year of manufacture: 2012

Condition: ready for operation (used), 6230 - ITALPRESS Bandsaw - Motor Power: 3 kW - Table Length: 103 cm - Table Width: 71 cm - Maximum Cutting Height: 3200 mm - Maximum Cutting Width: 6700 mm - Wheel Diameter: 700 mm - Manual Brake - Maximum Blade Length: 5020 mm - Minimum Blade Length: 4920 mm - Star-Delta Start - Manually Adjustable Fence - Voltage: 380 V Bdedpfx Akju Up S Uexsb - Dimensions: Width 1400 mm, Length 800 mm, Height 2200 mm

Condition: excellent (used), power: 9.19 kW (12.49 HP), cutting width (max.): 1,030 mm, empty load weight: 1,300 kg, roll diameter: 1,050 mm, saw band length: 7,200 mm, working height: 650 mm, Roller diameter: 105cm Bdsdjt Sk U Tspfx Akxeb A forklift is available for loading. We speak german. We speak english. Please contact us for further information.