Used CNC turning and milling centers for sale (667)

Condition: used, Year of construction: 2004, Technical details: turning diameter over bed: 550 mm turning dia. over face-slide: 390 mm turning length: 513 mm max. turning diameter: 300 mm z-axis: 580 längs mm x-axis: 205 plan mm control: Fanuc 21i-TB spindle head: A2-6 workpiece spindle bore: max. Ø 65 mm spindle passage: Ø 76 mm revolution per minute: max. 4.500 U/min rapid power traverse in X-and Z direction: 24 / 30 mm/min tool turret - number of stations: 12 spindle hours: 20742 h operating hours - idle run: 63097 h tailstock taper ISO: Konus MT#4 tailstock quill stroke: 80 mm current type: 3~, 200/220V / 50/60 Hz total power requirement: ca. 23 (28,95 kVA) kW Weight approx.: 4,15 t dimension machine xH: Tiefe: 4,0 x 1,8 x 1,8 m dimensions L x W x H: Stangenlader: 2,0 x 0,9 x 1,3 m Further technical information: Tool turret with 12 positions, including 3 positions for driven tools (max. speed 5,000 rpm), largest tool Ø 40 mm Foln Tou Ix Inenfnspg Tailstock operation via foot switch Bar loader LNZ Quick Load Servo 65, with 600mm pull-off device, material Ø min./max.: 6.0/65mm; bar length min./max.: 350 / 1300mm movable hinged belt chip conveyor LNS Turbo, with coolant tank and pump hydraulic unit Equipment: -controlled parts catcher for workpieces -machine lighting i.D. *

Condition: excellent (used), Year of construction: 2018, Functionality: fully functional, turning length: 800 mm, turning diameter over cross slide: 400 mm, turning diameter: 500 mm, Machine Details Stock No. 1105-03588 Type of machine CNC Lathe - Inclined Bed Type Make HAAS Type DS 30 Y Year of manufacture 2018 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Delivery time short term Freight basis ex works Technical details turning diameter 762 mm Foln Tnjwcyy Aofnjpg turning length 800 mm control Haas chucking diameter 254 mm hollow 76 mm swing diameter 762 mm turning speeds 3400 rpm output 407 Nm Power 22 KW Tool changer 12 VDI 40 transmission ratio 2 weight of the machine approx. 7.3 T t dimensions of the machine approx. 3.3 X 2 X 1.9 H m Additional information with manual guide (HAAS control) WIT C AXIS AND Y AXIS +LIVE TOOLS CHIP CONVOYER SUP SPINDLE

Condition: good (used), Year of construction: 2007, operating hours: 21,168 h, machine/vehicle number: 8087020322B, For sale: GILDEMEISTER Sprint 65 linear CNC lathe Model: GILDEMEISTER Sprint 65 linear Year of manufacture: 2007 Control: SIEMENS 840D Operating hours: 21,168h On-time hours: 61,362 h Technical data: - Max. revolutions of main and counter spindle: 5000 rpm - Main spindle passage: up to Ø 65 mm (bore Ø 75 mm) - Rapid traverse speeds: up to 30 m/min Equipment: - 3 turrets with 12 stations each - Turret 1 has a fault and needs to be repaired. - Tool holder VDI 30 - Drive for driven tools on all turret stations - C-axis for main and counter spindle - Y-axis on slide 3 - Counter spindle flushing with coolant flushing - Workpiece collection device - Workpiece conveyor belt - Mechanical preparation for oil mist extraction device - Electrical interface and software preparation for bar loading magazine - Synchronous operation between main and counter spindles - Hinged belt chip conveyor - 2 additional inputs/outputs (4 M functions) - Workpiece counter and time calculator - Rigid thread cutting (without compensating chuck) - Software for polygon turning on slides 1, 2, 3 - Constant cutting speed - Spiral interpolation on slide 3 (thread milling) - Spindle speed monitoring system - Three-color signal light - Air conditioning for electrical control cabinet - High-pressure coolant system with belt filter and heat exchanger (capacity 980 l, pressure 20 bar, 40 l/min. for turrets 1, 2 and 3) - 3-jaw chuck for main spindle - 3-jaw chuck for counter spindle - Coolant spray gun for cleaning the work area Fpoln Tnevzwm Eefnog - Differential pressure system for the counter spindle with the option of setting 2 different clamping pressures - Flushing of the upper slides with cutting fluid - The machine is powered. Price: €36,000 Location: 75334 Straubenhardt If you are interested or would like further information, please contact us.

Condition: new, Year of construction: 2024, EMCO Concept MILL 105 PC - controlled CNC - table - machining center machining center Machine complete with full enclosure, safety devices according to Foln Totz S Rhenfnjpg CE, 10-fold tool drum, central lubrication, machine light, electrical and mechanical preparation for automation, Tool set for operation. Year 2024

Condition: excellent (used), Year of construction: 2022, operating hours: 700 h, Functionality: fully functional, Like-new OKUMA LB3000II-MYW 800 Year of manufacture: 02/2022 On-time hours: approx. 3000 Spindle hours: approx. 700 Control: Okuma OSP-P300LA including OSP suite with numerous apps Eco Suite with extensive energy-saving features Counter spindle on W-axis, 825 mm travel and driven tool stations/C-axis and Y-axis - Main spindle: Short taper 6, front bearing diameter 120 mm, bore diameter 80 mm, hollow shaft motor with 22 kW power, speed range 45-5000 rpm, torque 427 Nm - 12-station tool turret with "radial" direct mounting system, drive data: 7 kW, 40.4 Nm, 45-6000 rpm C-axis with 0.001° resolution Synchronized tapping and automatic main spindle interpolation - Y-axis with 115 mm stroke (+70 / -45 mm) and hydraulic clamping - Counter spindle on W-axis, cylindrical mount, front bearing diameter 100 mm, bore diameter 62 mm, speed range 50 - 6000 rpm, W-axis rapid traverse 30 m/min C-axis function (0.001°) on counter spindle Tool height correction in Y-axis for turning tools Tool monitoring system Fslswc N Aasn Tnfnspg Handwheel Tool measuring device 4 GB part program memory MacMan machine management 2x USB 2.0 ports Ethernet/LAN interface with browser and DNC-T1 Chuck opening/closing with the spindle running via M-function Electrical Spindle orientation +/- 0.1° 96 tool corrections Hi-Cut Pro for driven tools Kitagawa chuck, bore in chuck: diameter 75 mm, outer diameter: 254 mm, speed: 4,200 rpm, bore in draw tube: diameter 70 mm Kitagawa chuck, bore in chuck: diameter 45 mm, outer diameter: 169 mm, speed max. 6,000 rpm, bore in draw tube: diameter 45 mm Hinged belt chip conveyor Mayfran MT 10 - discharge height approx. 1,200 mm Submersible pump with motor, reinforced coolant pump 4 bar / 35 l/min Bar loader LNS SL 80 S Programmable workpiece catcher, with finished part container mounted on the front of the door, pneumatic 6 bar, for parts up to diameter 80 x 150 mm, workpiece weight max. 5.8 kg Availability: immediately

Condition: used, CNC bar lathe Gildemeister CTX 300 with Y axis Fanuc CNC model 16i - T Main spindle nose ASA 6 Main spindle power 12 Kw Main spindle hole 60 mm Turning diameter 230 mm Turning length 500 mm Number of RPM main spindle 5000 Number of tool holder turrets 1 Number of tools 12 Number of live tools 12 tool attachment type VDI 30 X-axis travel 160 mm Y axis travel + - 32 mm Z axis travel 500 mm Rapid feeds X Y Z 24 m/min Sub-spindle yes ASA 5 spindle nose Sub-spindle RPM 5000 / 9 Kw Sub-spindle hole 30 mm Iemca bar loader Swarf conveyor 2002 The machine can be seen working in our warehouse in Gussago BS. Fpeln Tnfoqh Rpnsnsg

Condition: good (used), Year of construction: 2008, Gildemeister GMX 250 linear, Year of manufacture 2008, Siemens 840 D control system, Max. bar capacity up to 65 mm, Adjustable axes Fpsln Tnfewcf Aisnog X1/Y1 - 550/180 mm, Z1 - 1185 mm, B1 - 240 degrees, X2 - 180 mm, Z2 - 1050 mm, Z3 - 1150 mm, Chuck Ø 200/250 mm, 1 12-station VDI 40 turret, 46-station HSK 63 magazine, Counter spindle, B-axis NC swivel milling head, 9200 spindle hours, Extraction system, Belt filter, Internal coolant supply 20 bar,

Condition: excellent (used), Year of construction: 1998, turning length: 650 mm, turning diameter over cross slide: 370 mm, turning diameter: 500 mm, spindle bore: 77 mm, Machine details Stock no. 1105-04067 Type of machine CNC Lathe Make DAEWOO Type PUMA 250 B Year of manufacture 1998 Fpslnowcytco Tnfneg Type of control CNC Storage location HAGUENAU FRANCE Country of origin Corea Delivery time to be agreed Freight basis ex site Technical details turning diameter 370 mm turning length 648 mm control Fanuc 18 t bar diameter 77 mm swing dia. 570mm swing diameter over cross slide guide 255 mm max. turning diameter 255 mm drive capacity - spindle motor 18.5/22 kW turning speeds 3500 rpm turret (x-stations) 10 pos. JAPAN rapid traverse X-axis 24 m/min total power requirement 32 kW weight of the machine approx. 6 t dimensions of the machine approx. 3.43 X 1.85 X 2 m Additional information GOOD MACHINE WITH CNC FANUC 21 IT 3 JAW CHUCK DIA 250 MM CHIP CONVoYEUR TOOL SETTER COOLANT

Condition: excellent (used), Year of construction: 2002, Biglia B 301 SM .. CNC control FANUC 18 ITB Fpelswc Dhwen Tnfnog Equipment .. Number of spindles: 2 .. Number of turrets: 1 .. Live tools: yes .. C-axis .. B-axis X-axis Z-axis WORKING RANGE - TURNING- .. Swing diameter (max.): 400 mm .. Turning diameter (max.): 220 mm .. Bar work (max.): 45 mm .. Maximum workpiece length: 380 mm Short bar loader AGW

Condition: excellent (used), Year of construction: 2016, EMCOMAT E-200 MC Cycle lathe with teach-in Sinumerik 828D control, 10.4" TFT color screen, Camlock DIN 55029 size 5 mount, Center distance 1000 mm, Center height 200 mm, with machine stand and standard accessories, metric mechanics, Power 7.5 KW (100% ED) Infinitely variable spindle speeds 50-4000 rpm Incl. partial cladding and chip protection doors, Complies with European Safety standards CE Year of manufacture 2016 Mach. No. D5A162201 Fpsln Tjv A S Tijnfnjg

Condition: excellent (used), Year of construction: 2017, Functionality: fully functional, turning length: 2,500 mm, turning diameter over cross slide: 660 mm, turning diameter: 660 mm, spindle motor power: 30 W, spindle speed (min.): 30 rpm, spindle speed (max.): 3,000 rpm, spindle bore: 102 mm, travel distance X-axis: 630 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 2,585 mm, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 8,000 rpm, rotational speed (min.): 80 rpm, spindle nose: ASA 11, tool length: 450 mm, Equipment: documentation/manual, rotational speed infinitely variable, Used 7-axis multitasking CNC turning center "DOOSAN PUMA SMX3100LS" with swivel upper head equipped with tool changer, sub spindles and FANUC 31i-B5 CNC. Fsln Tnsv Tnpujfnjpg

Condition: used, 5 axis: yes Milling and turning: yes 5 axis machininng center (milling/turning from bar) Under power in our warehouse MAKE CHIRON MODEL MILL 800 5 axis CNC Fanuc 18iMBS (5 simoultaneous axis 1*) X, Y, Z (mm) 800 – 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs Coolant through spindle 70 bar (see note 4) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Diameters min/max 5/65 mm L= 600-1200 mm Fpslsgph Rnon Tnfnsg Highspeed (2) 60m/min. Spindle 20-12.000 min.’ – 140 Nm.12.000 RPM 12,5 KW/Max 34kW Swivelling head (CNC controlled) ± 100° Low hours This machine can be inspected under power in our Warehouse Mimu Machine Tools (Italy)

Condition: excellent (used), Year of construction: 2011, CNC twin-spindle turning center Control: CNC path control including 19" TFT Siemens Sinumerik 840 D sl solution line with ERGOline control and with ShopTurn 3 G TECHNICAL DATA Max. turning diameter 340 mm Spindle distance 1470 mm Turning length 1135 mm Swing over bed 700 mm Swing to tool carrier 2540 mm Travel paths: X1 – Tool carrier I 270 mm Y1 – Tool carrier I 120 mm Z1 – Tool carrier I 1200 mm X2 – Tool carrier II 195 mm Y2 – Tool carrier II 80 mm Z2 – Tool carrier II 1200 mm X3 – Counter spindle slide 180 mm Z3 – Counter spindle slide 1200 mm Main spindle Integrated spindle motor ISM 102 Drive power (100/40% duty cycle) 40/48 kW Torque (100/40% duty cycle) 570/680 Nm Speed range 0-4000 rpm Bar diameter 102 mm Draw tube inner diameter 104 mm C-axis and spindle brake (angular resolution) 0.001° Counter spindle Integrated spindle motor ISM 76 Drive power (100/40% duty cycle) 25/32 kW Torque (100/40% duty cycle) 280/380 Nm Speed range 0-5000 rpm Bar diameter 65/75 mm Fpoln Tnfjwcd S Nsnjg C-axis (angular resolution) 0.001° Slide 1 Tool carrier (direct drive) Number of tools 12 Tool holder diameter VDI (DIN 69880) 40 mm Maximum power (100/40% duty cycle) 10.9/14.2 kW Maximum torque (100/40% duty cycle) 26/34 Nm Speed range 40 – 10,000 rpm Slide 2 Tool carrier (direct drive) Number of tools 12 Tool holder diameter VDI (DIN 69880) 40 mm Maximum power (100/40% duty cycle) 10.9/14.2 kW Maximum torque (100/40% duty cycle) 26/34 Nm Speed range 40 – 10,000 rpm Slide 3 Rapid traverse speed X/Z axis 30/45 m/min Tool resolution Z axis 0.001° Feed force (40% duty cycle) X/Z axis 16/13 kN EQUIPMENT/ACCESSORIES  IRCO ILS-RBK 100/16 short-bar loader  Various main spindle reducers  NC-controlled workpiece retrieval device from both the main and counter spindles The device consists of an NC-controlled *Horizontal axis *Swivel unit *Vertical axis *2-jaw gripper for interchangeable gripper jaws  Conveyor belt for removing workpieces from the machine  8/20 bar coolant system with immersion cooler  Chip conveyor  Oil mist extraction  Control cabinet cooling unit (up to 40°)  Counter spindle slide  Easy-Tool monitor  1 collet chuck for quick-change clamping head size 100 for the main spindle  1 collet chuck for quick-change clamping head size 100, Nova Achsfix for the counter spindle  Approx. 40 various quick-change clamping heads size 100 (complete inventory)  Pneumatic tool changer, ø 100 mm  Approx. 50 various tool holders, fixed and driven (complete inventory)  Mounting elements  Documentation

Condition: excellent (used), Year of construction: 2007, Machine Details Stock No. 1105-03747 Type of machine CNC Lathe Make HARDINGE Type GS 200 MSY Year of manufacture 2007 Type of control CNC Storage location FRANCE Country of origin JAPAN Delivery time immediately Freight basis EXW -free on truck Technical details turning diameter 500 mm turning length 540 mm control FANUC 18TB greates pass round over bed 380 mm center distance 600 mm x-travel plan top 210/ mm z-travel lengthwise 520 mm spindle bore 45 mm turning speeds 3500 rpm total power requirement 21 kVA weight of the machine approx. 5 t Additional information equipment: cnc fanuc 18tb Fjln Tnfewcqvbsnepg with 1 chuck + SUP SPINDLE 1 star turret with 12 tool stations vdi 40 c axis + live tools + Y AXIS LOT OFF TOOLS BAR FEEDER LNS QUICK LOAD SERVO coolant basin, measuring arm swarf conveyor transformer (L:1.0xW:0.46xH:0.86m) machine can be demonstrated under power

Condition: excellent (used), Year of construction: 2016, Takamaz XY 120 Plus with Fanuc OTi Technical Specifications: • Year of Manufacture: 2016 • Control System: Fanuc Oi-TD • Machining Hours: 9,247 hours • Control System Hours: 24,218 hours (as of March 25, 2025) Axes: • X1 axis (150 mm) • Z1 axis (330 mm) • Y1 axis (+/- 35 mm) • X2 axis (150 mm) • Z2 axis (440 mm) • Machining Capacity: • Max. Turning Diameter: Main 170 mm / Sub 135 mm • Max. Turning Length: 330 mm • Bar Capacity: Main Ø 42 mm / Sub Ø 20 mm • Spindle Speed: up to 5,000 rpm • Drive Power: Powerful spindle motor for high cutting speeds • 2 Tool turrets: 12-station turret each Fpeln Tnowc Db Dofnsg _____ Accessories • Bar loader: Short bar loader • Coolant system *AGW *Documentation

Condition: excellent (used), Year of construction: 2010, EMCO E1200, SIEMENS 810D, 12,000 RPM 3 axis CNC milling machine with integrated tool magazine 20 pos. Control: SIEMENS 828D Spindle: Spindle power: 11KW / S6 Speed: 50 - 12000 rpm Torque: 70 Nm / S6 Tool holder: ISO 40 DIN 69871 Pull stud: ISO7388/2 Type B Strokes: X=1200mm, Y=550mm, Z=500mm Distance between spindle nose and table: 100 - 600 mm Rapid traverse X-Y-Z: 24 m/min Table: Cast iron table, ground with T-slots Number-width-distance: 5 - 18 - 100 Clamping surface: 1300 x 570 mm Maximum table load: 1000 kg Tool changer: Drum magazine with holders for 20 tools Tool change time (tool - tool) tool) 1.6 seconds Coolant: Standard pump 2 bar Work area lighting: By 1 halogen spotlight Standard equipment: o Central lubrication o Thread cutting without compensating chuck o Spindle blow-out device for cleaning Feln Tstpawqsnfnjpg cleaning of the holder during tool change o Coolant tray 210 liters o Leveling elements (4 pieces) Year of manufacture 2010 Machine no. M-064.046.10

Condition: good (used), Year of construction: 2011, CNC Turning and Milling Center Manufacturer: DMG Machine Model: CTX beta 1250 TC Control: Siemens 840 D with Ergoline and ShopTurn Year of Manufacture: 2011 TECHNICAL DATA Travel Paths - Maximum Turning Length (mm) 1,250 - Y-Axis: (mm) ± 100 - B-Axis: (degrees) ± 110 Main Spindle ISM 102 - Drive Power 100/40% DC: (kW) 35/45 - Torque 100/40% DC: (Nm) 600/770 - Maximum Speed: (rpm) 4,000 - Hollow Clamping Device: Hydraulic - Drawtube Inner Diameter: (mm) 104 - Differential Pressure Clamping Counter Spindle with ISM Tailstock Function 72 - Drive power 100 / 40% duty cycle: (kW) 25 / 32 - Torque 100 / 40% duty cycle: (Nm) 280 / 360 - Maximum speed: (rpm) 5,000 - Differential pressure clamping Tool magazine: Chain magazine - Tool holder: Capto C6 - Number of tool positions: 48 EQUIPMENT FEATURES + Direct position measuring systems in the X, Y, and Z linear axes + Cooling system for spindle motors, motor consoles, turning/milling spindle, B-axis torque motor + USB interface + Ethernet interface + Off-center turning and milling Fpelnjv R Uynj Tnfnsg + Gear hobbing milling + Connection for oil mist extraction, electric/mechanical + Top cross slide with turning/milling spindle as motor spindle, with hydraulic clamping during turning. + 2 C-axes (main and counter spindle) with clamping + Y-axis +/- 100mm + Differential pressure clamping for main spindle + Differential pressure clamping for counter spindle + Internal coolant supply for turning/milling spindle 8/20/80 bar selectable via M-function + Belt filter system + Chip conveyor, hinged belt + Bar machining package: ++ Workpiece retrieval device including conveyor belt ++ 4-color indicator light ++ Connection for bar feed/loading magazine + In-process workpiece measuring device, Renishaw + Compressed air cleaning of the safety glass on the work area door Subject to changes and errors in the technical data and information.

Condition: excellent (used), Year of construction: 2018, The PUMA TT is a horizontal milling and turning center, supported by 2 driven tool turrets, y-axis and built-in counter spindle. Commissioning 2019 Bar capacity 81 mm, CNC control FANUC 31i-B with manual Guide i, Main and counter spindle as built-in spindle 3500 rpm 433 Nm, two 12-position tool turrets with directional logic, driven tools 5000 rpm 47 Nm, Top tool turret with y-axis, automatic tool measuring arm, electronic tool monitoring, Parts ejector for counter spindle with internal coolant flushing. Parts removal with conveyor belt, max. workpiece weight 4 kg, Three-jaw chuck HS-10, Booster pump incl. filter approx. 30 bar, Hinged belt chip conveyor, Clamping top size 100, Drilling and milling head with internal cooling, QUICK LOAD SRVO II bar loading system up to 1600 mm bar length, Machine dimensions: L 4050 mm x H 2480 mm x width 2210 mm Weight: 12,700 kg Machine can be inspected under power. Foln Tnjuacp Defnopg NEW PRICE: 440.000,-

Condition: ready for operation (used), Year of construction: 2011, turning diameter 420 mm turning length 760 mm control FANUC i Series turning diameter at chucking work 305 mm travel -x axis 293 mm travel -z axis 830 mm rapid travel - longitudinal/face 30 m/min Fpslsvzhg Asn Tnfnjg main spindle speeds: 2800 UpM c-axis 0,001 ° turret (x-stations) 12 spindle bore diameter 115 mm milling spindle motor 5000 UpM spindle drive 22/18,5 kW rated capacity 45 kVA weight of the machine ca. 6 t dimensions of the machine ca. 3,9 x 2,0 x 2,02 m High-performance horizontal turning center PUMA 3100 M. Running hours: approx. 3600, switch-on hours: 41000. 12-station tool turret with 50 mm bore diameter, C-axis, driven tools. Machine dealer with own stock of 1600 m².

Year of construction: 2006, Condition: good (used), Maschinen-Details Lagernummer 1105-03796 Maschinenart CNC Drehmaschine Fabrikat HARDINGE Typ ELITE II 8/51 Baujahr 2006 Steuerungsart CNC Steuerung FANUC 21 I TC Lagerort FRANKREICH Ursprungsland UK Lieferzeit nach Absprache ab HAGUENAU FRANCE Technische Details Drehdurchmesser 340 mm Drehlänge 350 mm Steuerung FANUC 21 I TC Drehzahl 5.000 U/min Antriebsleistung 11 kW Anzahl der Werkzeuge 12 St. Anzahl Revolver 1 Werkzeugaufnahme VDI 30 Zusatzinformationen Spannmittel Hauptspindel 3 BAKENfutter Reitstock Foln Tnfsiyp S Sjnopg Programmiersystem fanuc 21 I TC 3 AXIS WITH LIVE TOOLS VERY NICE MACHINE CHIP CONVOYER

Condition: refurbished (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: 511981, number of spindles: 2, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Manufacturer: INDEX Machine type: G 200 Y/B Machine number: 511981 Year of manufacture: 2007 Generally overhauled: 2024/2025 Control: Siemens Sinumerik 840 D_pl, Version: 6.5 Drives: Siemens Simodrive 611 digital Specifications: Main spindle: Hollow clamping cylinder, 60 mm bore, with C-axis Counter spindle: Hollow clamping cylinder, 60 mm bore, with C-axis, coolant through and via the spindle, tailstock function with foot switch Cross slide 1: X, Z, Y, B, C axes, turret with 14 driven stations Cross slide 2: X, Z, C axes, turret with 14 driven stations Sliding hood: Manual Fpoln Tsv Rb U Eenfnjg Chip conveyor: Knoll chip conveyor incl. Maintenance switch Coolant system: 8 bar / 18 bar Bar loader: Unimag interface for bar loading magazine Gantry removal device with parts removal conveyor Further information: Renewal of guideways X1, Z1, X2, Z2/Z4 Renewal of ball screw drive X1, Y1, Z1, X2, Z2/Z4 Renewal of cable carrier turrets 1 and 2, Z4 (including all cables, hydraulic and pneumatic hoses) Sealing Y/B axis Repair of turret head 1 and 2 (bearings, seal kit, etc.) New bearings for main spindle S4 including encoder and encoder wheel New hollow clamping cylinder S4 New bearings for counter spindle S3 including encoder and encoder wheel New hollow clamping cylinder S3 Repair of all axis motors by Siemens Renewal of all axis encoders (rod encoders, Glass scales) Replacement of safety glass for sliding door Replacement of control cabinet wiring including electromechanical components Delivery can be made shortly after receipt of order from the Nienhagen factory. This offer is subject to change without notice, availability, and prior sale. Payment terms: 100% upon order Commissioning will be charged separately.

Condition: new, Year of construction: 2024, EMCO Concept TURN 105 Folstz S I Hon Tnfnopg PC-controlled CNC bench lathe Machine complete with full enclosure, safety devices according to CE, 8-fold tool turner, manual tailstock manual tailstock, central lubrication, machine light, electrical and mechanical mechanical preparation for automation automation, tool set for operation. operation. Year 2024

Condition: like new (used), Year of construction: 2010, Functionality: fully functional, WORKING CAPACITY Max bar working diameter 65 mm Max turning diameter 230 mm Fpolnowc A Txo Tnfneg Max working length 250 (320) mm CNC CNC Fanuc 31i-T Notes Manual Guide, Polygoning, SBS Drives Fanuc MAIN SPINDLE Max rotation speed 4000 rpm Spindle nose ASA6” Spindle hole 80 mm Internal bearing diameter 110 mm Chuck diameter 165/210 mm Max power 26 kW Accuracy (C axis) 0.001° SUBSPINDLE Max rotation speed 5000 rpm Spindle nose ASA5” Spindle hole 55 (45 passage) mm Internal bearing diameter 80 mm Chuck diameter 165 mm Max power 11 kW Accuracy (C axis) 0.001° Automatic B axis positioning offset 115mm / stroke 420mm Rapid feed B 30 m/min TURRET 1 Rotation time (1 pos) 0.15 sec. Driven tools speed 4000 rpm Driven tools power 3.7 Kw Axis stroke X1 170 mm Rapid feed X1 18 m/min Axis stroke Z1 390 mm Rapid feed Z1 30 m/min Axis stroke Y1 90 (+40/-50) mm Rapid feed Y1 9 m/min TURRET 2 Positions number 12 Rotation time (1 pos) 0.15 sec. Number of driven stations 12 Driven tools speed 4000 rpm Driven tools power 3.7 Kw Axis stroke X2 170 mm Rapid feed X2 18 m/min Axis stroke Z2 390 mm Rapid feed Z2 30 m/min Axis stroke Y2 90 (+40/-50) mm Rapid feed Y2 9 m/min EXTRA Coolant pump 18Bar 350lt. Tool presetter 2 Workpieces conveyor belt Yes Chip conveyor yes Workpiece ejection robot yes Machine total weight 7400 kg Floor space 4400x2150x2200 mm The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy cannot be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2013, Alpha 1550XS - Cycle lathe incl. accessories Center distance is 1500 not 2000 Fpolnsunruyo Tnfnsg Multifix holder 16 pieces Year of construction 2013 Top condition (really in top condition) Various interchangeable jaws (soft jaws) steady rest face plate Spindle bore 104mm Turning over bed 550mm Three-jaw chuck 315mm

Condition: excellent (used), Year of construction: 1995, EmcoTurn 465 Year of construction 1995 With bar loader FMB and Promot Portal Folstpambjn Tnfnopg Siemens 840C VDI30 star turret