Used CNC turning and milling centers for sale (665)

Condition: like new (used), Year of construction: 2015, operating hours: 272 h, Functionality: fully functional, machine/vehicle number: S4E150081, turning length: 510 mm, turning diameter over cross slide: 300 mm, travel distance X-axis: 160 mm, travel distance Z-axis: 510 mm, rotational speed (max.): 6,300 rpm, turning diameter over bed slide: 430 mm, Machine with C-axis, driven tools, and bar feeder! The machine was used for training purposes and has only 272 spindle hours. TECHNICAL DETAILS Swing diameter over bed: Ø 430 mm Swing diameter over cross slide: Ø 300 mm Max. turning length: 510 mm Control: Siemens Sinumerik Operate Travel range Travel in X: 160 mm Travel in Z: 510 mm C-axis: 360° Main spindle Draw tube inner diameter / spindle bore: Ø 45 mm / Ø 53 mm Speed range: 0 - 6,300 rpm Spindle torque: 78 Nm Spindle bearing (inner diameter): Ø 80 mm Drive power: 8 / 13 kW Tool changer Number of tool positions: 12 Spindle shank: VDI 30 Tool cross-section for Square tools: 20 x 20 mm Shank diameter for boring bars: Ø 32 mm Number of driven tools: 6 Dolqsv Imzfe D S N Uscg Torque: 16 Nm Drive power: 4 kW Drives Rapid traverse speed X / Z: 24 / 30 m/min Rapid traverse speed C: 250 rpm Feed force in the X-axis: 4,000 N Feed force in the Z-axis: 6,000 N Positioning range Ps (according to VDI 3441) X / Z: 0.003 / 0.003 mm Tailstock Tailstock travel: 510 mm Max. contact force: 6,000 N Internal taper for holding the live center: MK 4 MACHINE DETAILS Spindle hours: 272 h Height of the rotary axis above floor: 1,100 mm Machine height: 1,958 mm Machine footprint (W x D): 2,275 x 1,790 mm Total weight: 3,300 kg Coolant system: 250 l Pump output at 3.5 bar: 0.57 kW Flow rate at 3.5 / 1 bar: 15 / 65 l/min EQUIPMENT - Programmable tailstock - emco LM800 bar loader - Hollow clamping cylinder including draw tube - Machine light - Coolant system - Electronic handwheel - Cleaning gun/Multiflow - Pneumatically automatic parts catcher - Fully automatic machine door - Chip conveyor - Extensive tool set - Three-jaw chuck

Condition: good (used), Year of construction: 2001, Used OKUMA CNC lathe LT 10-M - year of manufacture 2001 - including accessories: chip conveyor, coolant tray, coolant basin, bar conveyor - immediately available Dcelq Dsv Hfw As S N Ueg - loading with crane or forklift possible.

Condition: excellent (used), Year of construction: 2004, MAZAK INTEGREX 200-III ST 5 Axis Turning Centers Lathe, s/n 174623, w/ MAZATROL 640MT Pro Control, 40” Center Distance, 2.5” Bar Capacity, 26” Swing, 26” Turning Diameter, Travels: X-22.83”, Y-6.3”, Z-41.14”, B Axis Head Tilt: 225°, C Axis Index: 0.001°, 5,000 RPM Spindle Speed (Main/Sub), Live Tooling, 12,000 RPM Live Tooling Spindle Speed, 40-ATC, KM63 Taper, Sub Spindle, Oil Matic Oil Temp Regulator, Chip Conveyor Dslq Dou A Dglo S N Ujcg

Condition: used, For sale are driven tools and holders suitable for the DMG Mori Seiki machine with BMT60 (12-way turret) Manufacturer EWS VARIA /WT and EPPINGER (see pictures) Dcelq D Sjv H Tyxe N Ueg 1x AWA double 3x AWA single 4x holder external machining 5x boring bar internal machining 5x quick change system pliers Can be purchased as a package or individually.

Condition: excellent (used), Nakamura wt150 year 2005 fully functional complete with Iemca master 880 bar loader. Dcjlq Dev Iq Sus S N Ueg Right and left bar passage 51mm Asa5, Y axis on upper turret, motorized turrets. Part catcher type G. 9 motorized included, static tool holders included. Bellegrandi msctn52 collet holders included. Chip conveyor with increased 700 liter tank with 8 bar pumps. Fca Lodi 26900 italy. Great deal.

Condition: good (used), Year of construction: 2005, Functionality: fully functional, turning diameter: 32 mm, spindle speed (max.): 8,000 rpm, rotational speed (max.): 8,000 rpm, DMG Mori Sprint32 linear lathe with Iemca bar loader. Motorized tools on main carriage. Chip extractor and conveyor belt for parts. Possibility of working two channels simultaneously. Dolq D S Nsv H D R Is Uecg

Condition: like new (used), Year of construction: 2006, Turning and milling center - C-axis and spindle brake (hydraulic) Year of construction 2006 Control: Siemens Sinumerik 840D powerline CNC 3-D path control Dcelq Djrwxfge S N Usg Technical details Working area Rotation diameter over bed 640 mm Spindle distance 1500 mm Spindle head flat flange Spindle bore 107 mm Bar diameter 90 mm Spindle diameter in front bearing 150 mm Main drive 1 & 2 Drive power (100% ED) 36 kW Drive power (40% ED) 45 kW Speed range from - to -4000 rpm Buckling speed 575 rpm Max. Torque (40% ED) 750 Nm C-axis speed -4000 rpm Torque of the C-axis (holding torque) 600 Nm Slide 1 Longitudinal travel 1585 mm Plane path 550 mm Vertical travel Y +/- 110 mm Rapid traverse in X 40 m/min Rapid traverse in Z 70 m/min Rapid traverse in Y 24 m/min Slide 2 Longitudinal travel 1400 mm Facing path 225 mm Rapid traverse X 24 m/min Rapid traverse Z 40 m/min Slide 3 Longitudinal travel 1500 mm Rapid traverse Z 36 m/min B-axis on slide 1 Swivel range +/- 120 degrees Drive power (100% ED) 13.2 kW Drive power (40% ED) 22 kW Speed range from - to 20 - 12000 rpm Torque (40% ED) 100 Nm Tool carrier 1 Number of tool stations 12 Shank diameter according to DIN 69880 40 mm Number of driven tool stations 12 Speed max. -4000 rpm Installation dimensions / weight: 9.3 x 4.6 x 3.1 m / 24,000 kg Equipment: - Cross slide with turning/milling spindle / HSK 63A holder - Tool magazine 1 x 60-fold Further information is available on request!

Condition: good (used), Year of construction: 2008, We sell 1 x INDEX ABC incl. chip conveyor + LMI bar loading magazine Djlq Dov Hmiaj S N Uocg

Year of construction: 2012, Condition: like new (used), Fixed and live bushing - Iemca Smart 320/32 new in 2018 - very well equipped - chip conveyor - Mitsubishi M70 Control Djlq Dsikbdvo S N Uocg

Condition: ready for operation (used), Year of construction: 2008, operating hours: 14,000 h, Functionality: fully functional, controller model: Siemens 840D (Powerline), Equipment: chip conveyor, documentation/manual, TECHNICAL DETAILS Control: Siemens 840D (Powerline) Main spindle passage: 90 mm, C-axis Counter spindle passage: 90 mm, C-axis Turret 1: 12x VDI 30, all stations driven, axes X/Y/Z/B, additional milling spindle on the rear of the turret Dcolq D Sov D E Dke N Usg Turret 2: 12x VDI 30, all stations driven, axes X/Z EQUIPMENT - Portal removal device - Chip conveyor - Pumps - Collets - Tool holders (fixed and driven) - Manuals

Condition: reconditioned (used), Year of construction: 1996, Functionality: fully functional, turning length: 1,250 mm, spindle diameter: 90 mm, number of slots in tool magazine: 24, Recently renewed (January 2024): Guides Z2 / Z4 / X2; Ball screws Z2 / X2 / Z4; Cable and hoses of the drag chains for Z2 / X2 / Z4 TECHNICAL DETAILS Turning length: 1,250 mm Spindle clearance HSP/GSP: 90 / 90 mm Spindle nose HSP/GSP: taper no. 8 C-axis HSP/GSP: yes (C4) / yes (C3) Turret 1 Axes: XYZB Stations / of which driven: 12 / 6 Additional milling spindle: Capto C4 with automatic tool changer for 6 tools Turret 2 Axes: XZ Stations / of which driven: 12 / 6 Coolant system Type: Knoll system with paper belt filter Low pressure: 8 bar High pressure: max. 80 bar Dcolevitznjq D S N Uog EQUIPMENT - 2x Hainbuch 65 chuck - Numerous turning and drilling attachments with CDI interface - Mechanical steady rest for mounting on turret - Numerous driven tools CDI-Capto C4 radial and axial - Numerous fixed holders CDI-Capto C4 radial and axial

Condition: excellent (used), With C-axis, B-axis and Y-axis MAZAK Fusion 640M control Turning length -1020 mm Swing Diameter -540 mm Spindle speeds 35 - 5'000 rpm Tool changer with 80 positions Misc. accessories Dcelq Dsvvlfle S N Ujg MARCELS MASCHINEN CH

Condition: excellent (used), Year of construction: 2017, Functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 960 mm, Mazak Integrex J200S machining centre Maximum workpiece length: 1000 mm Maximum turning diameter: 380 mm Axis options: X-axis: 450 mm, Y-axis: 200 mm, Z-axis: 960 mm Dcjlq D S Njup T Uwj Ueg

Condition: used, Year of construction: 2012, Functionality: fully functional, Including tool holders and jaws. Basic machine data: Two-spindle turning/milling center with – main spindle and counter spindle Manufacturer Gildemeister Year of manufacture 2012 Control: SIEMENS SL Operate 3G without Shop Turn approval Technical details: Headstock, left Chuck diameter 315mm Spindle flange diameter 170h5 mm Spindle bore 104mm Spindle diameter in the front bearing 130mm Drive power (100% duty cycle) 25KW Drive power (40% duty cycle) 32KW Torque (100% duty cycle) 280NM Torque (40% duty cycle) 360NM Speed range from – to 0-5000 rpm Speed of the C-axis 2000 rpm Headstock, right Chuck diameter 315mm Spindle flange diameter 170h5 mm Spindle bore 87mm Spindle diameter in the front bearing 130mm Drive power (100% ED) 25KW Drive power (40% ED) 32KW Torque (100% ED) 280NM Torque (40% ED) 360NM Speed range from - to 2000 rpm Slide 1 Longitudinal travel 1200mm Cross travel 490mm Vertical travel Y +/- 100mm Slide 2 Longitudinal travel 1200mm Cross travel 195mm Slide 3 Longitudinal travel 1200mm Turning-milling spindle: Tool holder Capto C6 Spindle speed -12000 rpm Drive power (100% ED) 20KW Drive power (40% ED) 22KW Torque (100% ED) 79NM Holding torque, locked 1000NM Swivel range +/-110 degrees Tool magazine: Number of tools 120 Djlq Dsv Eg T As S N Uecg Max. tool length 300mm Max. tool diameter 80mm Max. tool weight 7Kg Tool carrier 2: Number of tool stations 12 Shaft diameter according to DIN 69880 40mm Number of driven tool stations

Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, turning length: 900 mm, rotational speed (max.): 5,000 rpm, controller model: Siemenes 840D, Equipment: chip conveyor, TECHNICAL DATA Control: Siemens 840D Main spindle speed: 5000 rpm Subspindle speed: 5000 rpm Center distance: 900 mm Travel paths Turret slide 1 (XYZ): 165 / 420 mm, Y: +50 / -30 mm Turret slide 2 (XYZ): 165 / 420 mm Turret slide 3 (XYZ): 165 / 640 mm Turret system Number of turrets: 3 Tool holder: VDI30 Number of driven tools: 12 ATC Delq D S Nev E Hk Ij Ujcg MACHINE DETAILS Total weight: 10,500 kg EQUIPMENT - Y-axis - Driven tools - Chip conveyor - Top XF 375 bar loader (BX06121026), built in 2007 Tools and clamping devices are not included

Condition: ready for operation (used), Year of construction: 2001, JOHNFORD VTC 880 TWIN PALLET CNC VERTICAL LATHE MAKE JOHNFORD, MADE IN TAIWAN Dcelqsukupre D S N Ujg MODEL VTC 880 + APC + ATC YEAR 2001 CONTROL FANUC 18 T MAX SWING DIA 1,000 mm MAX CUTTING DIA 900.0 mm STANDARD CUTTING DIA 800.0 mm MAX CUTTING HEIGHT 800.0 mm TRAVERSES X AXIS 50.0 mm to 810.0 mm Z AXIS 880.0 mm SPINDLE SPEEDS 10 to 800 RPM SPINDLE BEARING DIA 330.0 mm SPINDLE NOSE A2 - 11 SPINDLE MOTOR 18.5 / 22 kW TURRET TYPE AUTOMATIC TOOL CHANGER NO OF TYPES 2 X 12 ATC TOOLS SHANK SIZE BT 50 AND CAPTO PLUS FULL C AXIS MILLING TAPPING X, Z, C, A AND B AXES HIGH PRESSURE COOLANT PAPER COOLANT FILTRATION SWARF CONVEYOR FULLY OPERATIONAL FULL SET OF MANUALS GOOD RANGE OF TOOLING

Condition: refurbished (used), Year of construction: 2005, Functionality: fully functional, turning length: 1,500 mm, turning diameter: 520 mm, spindle speed (max.): 3,200 rpm, travel distance X-axis: 280 mm, travel distance Z-axis: 1,055 mm, workpiece weight (max.): 1,200 kg, TECHNICAL DETAILS Swing over bed: 700 mm Max. turning diameter: 520 mm Spindle pitch: 1,500 mm Travel X1: 280 mm Travel Z1: 1,055 mm Travel Z2: 1,090 mm Dcolq D S Njv Hqnto Uog Control system: Siemens Sinumerik 840D Main spindle Spindle head: DIN 55026 A2-8 Clearance through the drawbar: 95 mm Inner diameter of front bearing: 160 mm Inner diameter of rear bearing: 150 mm Clamping cylinder diameter: 315 mm Speed: 750–3,200 rpm Power (S1/S6 40%): 37/54 kW Max. torque (S1/S6 40%): 470/687 Nm Max. workpiece weight in the chuck: 400 kg Center of gravity distance from chuck: 175 mm Max. workpiece weight between chuck and tailstock: 1,200 kg Counter spindle Spindle head: DIN 55026 A2-8 Drawbar clearance: 95 mm Inner diameter of front bearing: 160 mm Inner diameter of rear bearing: 150 mm Clamping cylinder diameter: 315 mm Speed: 500–3,200 rpm Power (S1/S6 40%): 17/25 kW Max. torque (S1/S6 40%): 324/478 Nm Tailstock Travel: 1,050 mm Min./Max. distance between spindle and tailstock: 320–1,370 mm Min./Max. Feed force: 50–2,000 daN Quill taper: MT 5 Feed rates Rapid traverse X1-X2-Z1-Z2 and counter spindle: 30 m/min Ball screw X1-X2, pitch: 40 x 20 mm Ball screw Z1-Z2, pitch: 50 x 20 mm Ball screw counter spindle, pitch: 50 x 20 mm Feed force X1-X2: 1,640 daN Feed force Z1-Z2: 1,640 daN Feed force counter spindle: 1,640 daN General overhaul and maintenance - Replacement of the X-axis ball screw (upper turret): 2011 - Replacement of the clamping cylinder (spindle no. 1): approx. 2018 - Bearings replaced on both spindles: 2011 - Overhaul of both turrets: ongoing EQUIPMENT - Counter spindle - 2 turrets with driven tools - Y-axis of the upper turret: starting at 50 mm - Driven tools: 2 straight + 2 angled - Holders: 2 in-hole + 2 on the surface - Clamping jaws: 2 hard base jaws - Complete machine documentation - Replacement turret (after complete overhaul)

Condition: excellent (used), Year of construction: 2018, operating hours: 6,300 h, Functionality: fully functional, turning length: 700 mm, turning diameter over cross slide: 420 mm, spindle motor power: 18,500 W, spindle speed (min.): 10 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 80 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 795 mm, Double-spindle lathe DMG MORI NLX 2500/700 with Y-axis and IRCO Simag loading magazine Year of construction: 2018 Control system: Celos with MAPPS M730UM Switch-on hours: 9,300h Program running hours: 6,300h Technical data: Main spindle speed: ISM 80, 10 - 4,000 min-1 Drive power: 18KW Chuck: Kitagawa 10" / 254mm Counter spindle speed: ISM 41, 100 - 4,500 min-1 Drive power: 11KW Chuck: Kitagawa 6" / 159mm Turret: 20 stations Speed AGW: 10 - 10.000min-1 Dslq D S Net I E U Te Uscg Drive power: 5.5 KW Tool holder: BMT 40 Travel distances: - X-axis: 250mm - Z-axis: 705mm - Y-axis: 100mm (+/- 50mm) - C-axis: 0.001° Counter spindle with tailstock function Accessories: - IRCO Breuning Simag 80.1.R.II loading magazine - Chip conveyor - Coolant system (incl. counter spindle flushing) - Manual tool measuring arm - Parts ejector main and counter spindle - Workpiece conveyor belt - Automatic door - Robot interface - Safety fence Interface - Signal lamp

Condition: good (used), Controller NCT Dcslqotulyqe D S N Usg Main and subspindle Turret

Condition: ready for operation (used), Year of construction: 2016, Functionality: fully functional, turning length: 450 mm, turning diameter: 210 mm, spindle bore: 51 mm, TECHNICAL DETAILS Control: Fanuc i Max. turning length: 450 mm Max. turning diameter: 210 mm Spindle Bore in the spindle: 51 mm Tool turret Number of slots: 12 slots Driven: all EQUIPMENT - Fanuc i control - Central cooling - Tool probe - Knife holder Delq D S Nov In Ias Uecg

Condition: excellent (used), Year of construction: 2013, operating hours: 11,124 h, Functionality: fully functional, turning length: 705 mm, turning diameter over cross slide: 742 mm, turning diameter: 366 mm, spindle motor power: 18,500 W, spindle speed (max.): 5,000 rpm, spindle bore: 80 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 795 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 6,000 rpm, total height: 2,190 mm, total length: 3,995 mm, chuck outer diameter: 250 mm, total width: 2,180 mm, turning diameter over bed slide: 920 mm, Equipment: documentation/manual, rotational speed infinitely variable, DMG MORI NLX2500SY/700 CNC Lathe Machine Type: CNC Lathe with Sub Spindle, Driven Tools & Y Axis Year: 2013 Control: Mori Seiki/Mitsubishi M730BM Condition: Excellent Hours Power On Hours: 35976hrs Cutting Hours: 11124hrs Includes Static Tool Holders 3 Driven Tool Holders Tailstock Function on Sub Spindle Swarf Conveyor Tool Presetter Parts Catcher BMT Tool Turret Technical Specifications Distance Between Centres: 700mm Standard Chuck Size - Spindle 1: 10" Standard Chuck Size - Spindle 2: 8" Bar Work Capacity: 80mm No of Tool Stations: 12 X Axis Travel: 260mm Z Axis Travel: 795mm Y Axis Travel: +/-50mm(100mm) C Axis Travel: 360Deg Max Main Spindle Speed: 4000rpm Max Sub Spindle Speed: 5000rpm Swing Over Bed: 920mm Dcolq D S Nevu Sbds Ueg Swing Over Cross-Slide: 742mm Max Turning Diameter: 366mm Standard Turning Diameter: 271mm Max Turning Length: 705mm B Axis Travel: 734mm Min Spindle Indexing: 0.001゜ Shank Height for Square Tool: 25mm Boring Bar Shank Diameter: 50mm Rotary Tool Shank Diameter: 26mm Turret Indexing Time: 0.27sec Max Rotary Tool Speed: 6000rpm Rapids(X,Z,B): 30,000mm/min Rapids (Y): 10,000mm/min Main Spindle Motor Power: 18.5kW Sub Spindle Motor Power: 11kW Rotary Tool Motor Power: 5.5kW Electrical Power Supply: 37.6kVA Coolant Tank Capacity: 366L Machine Dimensions: 3995x2180x2190mm Machine Weight: 6360kg

Condition: used, Year of construction: 1996, Switch-on time: 68743 h Spindle hours: 17338 h Dceljvfucfoq D S N Usg

Condition: excellent (used), Year of construction: 2005, Machine details Stock-No. 1105-04032 Type of machine Vertical Turning Machine Make INDEX Dcolqjuw U I Nj D S N Usg Type V 160 C Year of manufacture 2005 Type of control CNC Storage location FRANKREICH Country of origin Germany Delivery time immediately Freight basis ex site Technical details turning diameter 250 mm swing diameter 300 mm turning height 210 mm control SIEMENS 840 D travel -x axis 490 mm travel -z axis 260 mm external spindle dia. in forward position 110 mm turning speed range - spindle 5000 rpm turret (x-stations) 12 weight of the machine approx. 7,3 t dimensions of the machine approx. 3,2 x 2,3 x 2,3 m Accessories Chip conveyor Coolant system Additional information CONTROL SIEMENS 840 D WHIT TURRET 12 POSITION VDI 30 AND 2 FIXED TOOLS SUPPORT EXTRA MOOWING TOOLS AND C AXIS WITH LOADING AUTOMATION

Condition: excellent (used), Year of construction: 2010, Functionality: fully functional, turning length: 400 mm, turning diameter: 370 mm, spindle motor power: 11,000 W, spindle speed (max.): 6,000 rpm, spindle bore: 73 mm, travel distance X-axis: 380 mm, travel distance Y-axis: 210 mm, travel distance Z-axis: 480 mm, rotational speed (max.): 20,000 rpm, bar passage: 65 mm, total height: 2,670 mm, total length: 3,810 mm, chuck outer diameter: 200 mm, total width: 2,900 mm, bar diameter: 65 mm, spindle nose: Capto C5, overall weight: 8,500 kg, Equipment: rotational speed infinitely variable, Mori Seiki NT1000SZM Mill Turn Centre Machine Type: Mill Turn Centre Year: 2010 Control: MSX-711IV Control Condition: Excellent Format: Tool Spindle, Main Spindle, Sub Spindle, Lower Turret. Includes Kitagawa 5" Chuck Kitagawa 8" Hollow Chuck Spindle 1 Through-Hole Spindle 73mm High Speed Tool Spindle - 20,000rpm 76 Tool ATC Full selection of Tool Holders as seen in videos Swarf Conveyor 70 Bar High Pressure Coolant System Air Blow for Chuck (Spindle 1) Delq D Setwyc Ss N Ujcg Air Blow for Tool Tip (Tool Spindle) In Machine Tool Presetter for Tool Spindle and Turret 2 Workpiece Conveyor for Bar Feeder Spec Bar Feed Interface Tool Counter Workpiece Counter Signal Tower Double Foot Switch for both Spindles Part Program Storage Length (1MB) + 1000 Registerable Programs Knoll Compact Filter Unit Double Wound Transformer Technical Specifications Max Turning Diameter: 370mm Max Turning Length: 400mm Bar Work Capacity: 65mm Tool Spindle X Axis Travel: 380mm Tool Spindle Y Axis Travel: 210mm Tool Spindle Z Axis Travel: 480mm B Axis Travels: +/-120° C Axis: 360° Max Spindle Speed: 6,000rpm Through Spindle Hole Diameter: 73mm Max Tool Spindle Speed: 20,000rpm Taper for Rotary Tool Spindle: Capto C5 Tool Storage Capacity: 76 Spindle Drive Motor: 11/7.5kW Tool Spindle Drive Motor: 9/5.5kW Max Tool Diameter: 130mm Max Tool Weight: 5kg Dimensions: 3810x2895x2670mm Machine Weight: 8500kg

Condition: like new (used), Year of construction: 2023, operating hours: 251 h, Functionality: fully functional, turning length: 705 mm, turning diameter over cross slide: 742 mm, turning diameter: 366 mm, spindle motor power: 18,500 W, spindle speed (max.): 2,500 rpm, spindle bore: 102 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 795 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 6,000 rpm, bar passage: 102 mm, total height: 2,432 mm, total length: 4,214 mm, chuck outer diameter: 300 mm, total width: 2,980 mm, bar diameter: 102 mm, overall weight: 6,360 kg, Equipment: documentation/manual, rotational speed infinitely variable, DMG MORI NLX2500SY/700 CNC Lathe Machine Type: CNC Lathe with Sub Spindle, Driven Tools & Y Axis Year: 2023 Hours: 251hrs Control: DMG Mori ERGOline With Celos Software Condition: Excellent - As New Includes Static Tool Holders 3 Driven Tool Holders 102mm Bar Capacity Tailstock Function on Sub Spindle Automatic Door Barfeed Interface Swarf Conveyor Tool Presetter Parts Catcher BMT Tool Turret Technical Specifications Distance Between Centres: 700mm Standard Chuck Size - Spindle 1: 12" Standard Chuck Size - Spindle 2: 8" Bar Work Capacity: 102mm No of Tool Stations: 12 X Axis Travel: 260mm Z Axis Travel: 795mm Y Axis Travel: +/-50mm(100mm) C Axis Travel: 360Deg Max Main Spindle Speed: 2500rpm Max Sub Spindle Speed: 5000rpm Dcolqst U Smvs D S N Uog Swing Over Bed: 920mm Swing Over Cross-Slide: 742mm Max Turning Diameter: 366mm Standard Turning Diameter: 271mm Max Turning Length: 705mm B Axis Travel: 734mm Min Spindle Indexing: 0.001゜ Shank Height for Square Tool: 25mm Boring Bar Shank Diameter: 50mm Rotary Tool Shank Diameter: 26mm Turret Indexing Time: 0.27sec Max Rotary Tool Speed: 6000rpm Rapids(X,Z,B): 30,000mm/min Rapids (Y): 10,000mm/min Main Spindle Motor Power: 18.5kW Sub Spindle Motor Power: 11kW Rotary Tool Motor Power: 5.5kW Electrical Power Supply: 37.6kVA Coolant Tank Capacity: 366L Machine Dimensions: 4214x2980x2432mm Machine Weight: 6360kg