Used CNC turning and milling centers for sale (666)

Condition: used, Year of construction: 2004, operating hours: 11,022 h, Functionality: fully functional, machine/vehicle number: 07520000211, turning length: 1,070 mm, turning diameter over cross slide: 400 mm, turning diameter: 560 mm, spindle motor power: 37 W, spindle speed (max.): 4,000 rpm, spindle bore: 79 mm, travel distance X-axis: 485 mm, travel distance Y-axis: 160 mm, rotational speed (max.): 12,000 rpm, Equipment: rotational speed infinitely variable, Gildemeister GMX 200 Linear with tailstock and steady rest for sale. Included is a cooling water treatment and a proper tool selection HSK 63 - A. The machine is being sold due to lack of orders. 49700 switch-on hours, 11022 spindle hours. Machine can be inspected and tested at any time. Loading possible without problems. Fpolq Aeug Uc Notp Rsg

Condition: refurbished (used), Year of construction: 2017, Functionality: fully functional, machine/vehicle number: 510864, turning length: 200 mm, CNC lathe INDEX G200 Overhauled: 2017 Machine number: 510864 max. turning length: 200 mm Bar loading magazine INDEX MBL Fjlq Asulhinotp Rjpg Main spindle Spindle passage collet clamping: 42mm Spindle diameter in front bearing: 85mm Spindle nose ISO702/1: 5 Chuck diameter: 140/160 Max. Nominal turning diameter: 200mm Max. Rotation diameter: 420mm Power Pmax 100%: 7.5/13/20 Torque Mdmax 100%: 35/61/95 Speed: 6300 Counter spindle Spindle passage collet clamping: 42mm Spindle diameter in front bearing: 85mm Spindle nose ISO702/1: 5 Chuck diameter: 140/160 Power Pmax 100%: 7.5/13 Torque Mdmax 100%: 35/61 Speed: 6300 Min. distance collet: 15mm Longitudinal travel: 445mm Rapid traverse: 22.5mm Cross slide 1 XZ (top) XZ: 120x400mm Feed force: 5000N Cross slide 2 (bottom) XZ: 105x400mm Feed force: 5000N Further information on request!

Condition: used, Year of construction: 2000, Functionality: fully functional, machine/vehicle number: 500358, turning length: 1,250 mm, turning diameter: 300 mm, spindle motor power: 43 W, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, INDEX G300L with Promot gantry loader. Machine is still in production and under power. The promot loader has 2 rotary indexing belts with approx. 30 pallet spaces each. The machine is equipped with high-pressure cooling lubricant (40 bar), paper belt filter and tool changer. For further information please contact us by mail. Fslsu Nmq Hjq Atp Repg

Condition: good (used), Year of construction: 1998, Functionality: fully functional, turning length: 500 mm, Lathe Hyundai HIT-S18 Control Siemens 840 C Year of construction 1998 Chip conveyor 8-position turret Fjlq Atoviunpep Rjpg 3 jaw chucks Fully automatic tool presetter Travels X 180 mm Z 510 mm Turning diameter 254 mm Turning length 500 mm Spindle speed 3600 rpm

Condition: excellent (used), Year of construction: 2011, Dear Sir or Madam the details of the Okuma Multus B400 with main and counter spindle tool magazine HSK 63 with 80 places 1500mm turning length main spindle passage 100mm CNC turning/milling center with CNC control OKUMA OSP P200L Enlarged main spindle Ø110mm Ø150/110mm, spindle nose size 11 Speed range 38-2800 1/min. Counter spindle as W-axis incl. hollow clamping device with Ø70mm bore in the draw tube helical interpolation also for thread milling Tool height correction in Y-axis for turning tools Extension kit "M "OSP P200L (Kit One-Touch IGF-M-D) Fpslq Atetdg Evsp Reg Software multifunction tool for the use of special tools 80-station tool changer instead of 20 stations C-axis synchronization software for simultaneous control of both C-axes Increased speed 10,000 rpm for driven tools 20/14 kW, max. 85 Nm Interlit ISF 540/6670 slat-band chip conveyor with integrated coolant tank Interlit SPB4 gravity belt filter with 900 L clean tank Supply pump TH 90/690 FSI frequency-controlled pump for gravity belt filter SPB 4 Manual rinsing gun for attachment to additional coolant tank SPB4 SMW VNK 250/110 Power clamping cylinder for hollow sp. m. Bore Ø 110.5 mm Chuck Rota THW Plus 315-104 A11 Cylinder SMW VNK 250/110 2-stage clamping pressure for power clamping device Call by program Door automation Multus B 400 Open/close via M command two doors, both open simultaneously Chuck Rota THW Plu 315-104 A8 Cylinder SMW VNK 225/95 mounted. Year of construction: 2011 Commissioning: June 2011 Warranty: A warranty for the used machine is excluded altogether. However, HAF Präzisionstechnik assures that defects, including hidden defects, are not known. Unknown defects can therefore not be excluded. Machine is under power and in very good condition. Viewing is possible by arrangement. We are also happy to process your acceptance parts in advance.

Condition: excellent (used), Year of construction: 2005, Chip conveyor Iemca Boss 545/32 bar loader Fpelq Aot Ab H Ustp Reg

Condition: repair required (used), Year of construction: 2000, goood....5461546 Felq Atpjunp Drj Repg

Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: 196633, turning diameter: 279 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 8 mm, travel distance Z-axis: 13 mm, rapid traverse X-axis: 1,181 m/min, rapid traverse Z-axis: 1,299 m/min, type of input current: three-phase, total height: 1,650 mm, total length: 1,670 mm, total width: 1,660 mm, spindle nose: A2-5/ 2.4''/ 1.625'', overall weight: 3,330 kg, Collet Chuck Parts Catcher Folq Atpjvvtv Ss Rspg Automatic Tool Eye Tailstock Complete Coolant System w/ Tank & Pump RS 232 Port Interface 3.5" Floppy Disk Drive Multi-Tap Transformer All Available Manuals

Condition: good (used), Year of construction: 2012, Functionality: unexamined, machine/vehicle number: CB010906, bar passage: 36 mm, overall weight: 3,800 kg, 5 axis Cnc lathe with moving bushing - bar capacity 36 mm - Top Automazioni RECORD 335 barfeed new in 2012 - Syntec Control Fpslq Atpeu Iafhe Rog

Condition: good (used), Year of construction: 2001, Lathe Mori Seiki SL-204 MC year of construction 2001 Control MSG-805 Travels: X 235 mm Z 520 mm max. diameter 390 mm turning length 507 mm top condition Felq Atpoup T Rfj Repg

Condition: good (used), Year of construction: 2008, EMCO CONCEPT MILL 450 Year 2008 100 % functional Immediately available Fjlougl Tljq Atp Ropg Weight-3800 kg.

Condition: refurbished (used), Year of construction: 2009, Functionality: fully functional, machine/vehicle number: 30214501, turning length: 2,000 mm, total length: 12,000 mm, WFL Millturn M60/2000 WORKING RANGE center distance mm 2000 swing over bed, turning diameter mm 690 MAIN DRIVE AC-drive with 2 gear steps drive power 100% duty cycle kW 40 max. speed min-1 3300 max. torque at the spindle 100% duty cycle Nm 1830 TAILSTOCK Fpelq Aou Hl R Tjtp Reg quill diameter mm 140 quill travel mm 160 quill force (adjustable) N 3500-31000 quill with installed live center MK 5 TOOL HOLDER (single tool holder, turning-boring-milling unit) AC-drive drive power 100% duty cycle kW 30 speed range max. min-1 6000 max. torque at the spindle 100% duty cycle Nm 315 travel vertical to the X/Z-plane (Y-axis) mm 300[-125/+175] pivot capability of the milling spindle (B-axis) ° -110/+90 spindle head acc. DIN 69893 HSK-A100 spindle diameter in front bearing mm 100 DIMENSIONS length (max. tool magazine) m 11 width/height m 3,9/3,3

Condition: not inspected (used), Year of construction: 1997, operating hours: 24,100 h, Functionality: not functional, machine/vehicle number: 407345, The hard drive was replaced, the machine does not work. Fpoleq Ii A Djq Atp Rog One y-axis All nodes in the set. There is no equipment. Loading is free.

Condition: ready for operation (used), Year of construction: 2018, Cnc lathe - parameters in the photos Fslq Atpot Innpj Rjpg

Condition: excellent (used), Year of construction: 2008, operating hours: 35,598 h, Functionality: fully functional, machine/vehicle number: 07400004031, spindle motor power: 20 W, spindle speed (min.): 3,250 rpm, spindle speed (max.): 5,000 rpm, bar passage: 90 mm, overall weight: 10,000 kg, bar capacity 90 mm - 2x12 position driven turrets - Y axis in upper turret - tail stock - Siemens 840D power line Control - machine in perfect condition that has always worked with oli - very very well tooled - Lns Sprint S2 barfeed. Fpolsuyx Hzsq Atp Rsg

Condition: used, Year of construction: 2009, Functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 26 m/min, bar diameter: 51 mm, Okuma Multus B200-W Machine weight: approx. 8 tons Foljvck A Njq Atp Repg Max. Spindle speed: 22000 rpm. Control: Okuma OVP 200L Tool holder: HSK 63 Number of tool positions: 40

Condition: excellent (used), Year of construction: 1997, operating hours: 64,905 h, Functionality: fully functional, machine/vehicle number: 501637, bar diameter: 65 mm, number of slots in tool magazine: 16, Equipment: documentation/manual, No minimum price - guaranteed sale at the highest bid! TECHNICAL DETAILS Control: Sinumerik 840C Fpslq Atpju Tc Dzo Rsg Bar feeder: Irco RBK 7212, year of manufacture 1999 Bar length: 1 m Bar diameter: 65 mm Turret and spindle Turret: 2 pieces, 8 places each, VDI30, 4 driven tools each Main spindle: Hainbuch chuck Counter spindle: 3-jaw chuck MACHINE DETAILS Operating hours: 64,905 h Dimensions incl. bar loader and chip conveyor (LBH): approx. 6 × 2 × 2 m Weight: approx. 6.5 t Operating voltage: 50 Hz, 400 V EQUIPMENT - Fixture for finished parts - Cooling system - Chip conveyor - Documentation - Various guide tubes for the bar feeder - including 2 tool holders

Condition: like new (used), Year of construction: 2009, Functionality: fully functional, travel distance X-axis: 260 mm, rotational speed (max.): 4,000 rpm, Control system: Siemens 840 D Travel: X-260 mm; Z-610 mm Fpelqot Ekdhe Atp Rsg max. turning diameter: 500 mm Speeds: Main spindle 0-4000 rpm; counter spindle 0-7000 rpm C-axis Y-axis +/-40 mm 12-position turret all driven Tool holder: VDI 30 Speed of driven tools 0-5000 rpm Bar capacity: 76.2 mm Accessories: Hainbuch collet chuck on main and counter spindle, Parts catcher, chip conveyor, Emco LM 1200 loading magazine, flushing gun, various tool holders and attached tools

Condition: excellent (used), Year of construction: 2006, Machine in perfect condition, 100% functionaly, can be inspected during production Felqotuqcws Atp Rjpg A lot of tools included

Condition: ready for operation (used), Year of construction: 2006, Functionality: fully functional, spindle bore: 42 mm, LNS Hydrobar bar feeder, Chip Blaster high pressure cooling, Felq Atpsug Ikms Ropg

Condition: excellent (used), Year of construction: 2015, operating hours: 17,500 h, Functionality: fully functional, machine/vehicle number: MA201301, feed length Y-axis: 112 mm, bar diameter: 80 mm, overall weight: 15,000 kg, three turrets - threeY axis - 80 mm bar capacity - parts catcher gantry type -barfeed interface - very well tooled - low hours Fpslst E A Acoq Atp Rsg

Condition: ready for operation (used), Year of construction: 2006, turning length: 1,500 mm, Turning and milling center, CNC control Siemens 840 D powerline, swing diameter over bed 640, spindle distance 1,500mm, Y-axis, tool magazine 60 places, main and counter spindle, 3-axis Fpelqovgczrj Atp Rsg

Condition: ready for operation (used), Year of construction: 1996, I have a CNC GILDEMEISTER CTX400E V5 lathe for sale. TECHNICAL AND VISUAL CONDITION: Very Good. Type: CNC lathe Manufacturer: GILDEMEISTER Model: CTX400E V5 Control: Heidenhain 1190 Fpjljq Acu Neq Atp Reg Country of manufacture: Germany Machine parameters: - head: 12 - tools for VDI-30 toolholders (all sockets driven) - max. rpm 5000 /min. - 2 x C axis - driven tools - capture spindle - receiver of finished part - max. turning diameter X axis = 290mm - max. turning length Z axis = 600mm - cooling system - main hydraulic chuck Hainbuch BZI 65 - hydraulic chuck Hainbuch BZI 65 - spindle bore Fi-66mm - pass-through spindle - interface supporting bar feeder - chip conveyor - full programming manual - Mechanical and Electrical Documentation - machine weight: 6.5 tons

Condition: good (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: CB970715, spindle motor power: 5 W, spindle speed (min.): 6,000 rpm, bar passage: 36 mm, overall weight: 3,800 kg, 36 mm-5 axis Swiss Cnc lathe with moving bushing - Barload BFG 35 barfeed - 37+50 collets - brand new Mitsubishi motor mod.MR-J2S-70A - Syntec Control Folqotxq Dio Atp Repg

Condition: good (used), Year of construction: 2008, Functionality: fully functional, spindle speed (min.): 6,000 rpm, bar passage: 32 mm, overall weight: 3,800 kg, 32 mm-5 axis Swiss Cnc lathe with moving bushing - Iemca Boss 332E barfeed new in 2008 - Syntec Control Felq Atjtxq Emep Ropg