Used cNC turning and milling centers for sale (618)

Condition: like new (used), Year of construction: 2021, functionality: fully functional, This multi-axis CNC lathe, CMZ TTL-66-66-T1Y-T2Y, was manufactured in 2021. It features a maximum bar capacity of 66 mm (both spindles), a turning diameter of up to 220 mm, and a main spindle power output of 35.5 kW. The machine is equipped with two high-performance spindles with a 66 mm bar passage, two turrets with 12/24 tool stations, driven tools with 14 kW and 12,000 rpm, and Y-axis capability on both the upper and lower turrets. It includes a 35-bar high-pressure coolant system, complete with a filtration system and an additional tank. For more information about this lathe, please refer to the attached brochure or contact us directly. Equipment includes: - LPS for left spindle - Reduction tube for left spindle - Hainbuch AXFIX 65 collet chuck (standard) 2703/0008 for left spindle - Hainbuch AXFIX 65 collet chuck (standard) 2703/0008 for right spindle Dksdpfx Aoxmhdnoh Uew - Tool presetting device - Side-mounted chip conveyor (standard version) - Upper tool turret (T1) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar), including 75µm filter - Lower tool turret (T2) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar), including 75µm filter - Coolant wash nozzle - TA/06000/10 8,000W coolant chiller unit - Machine status indicator light - Tool life management system - Tool load monitoring - Programmable automatic parts catcher (pneumatic) - The workpiece extractor is equipped with a pneumatic gripper for automatic opening and closing to retrieve finished parts - Pneumatic ejector for the sub-spindle with 100 mm adjustable stroke. End position detection via sensor - Coolant supply through right spindle - Interface for bar feeder (unimag) - Preparation for extraction unit, connection flange Ø100 The machine comes complete with a chip conveyor, coolant unit, and tool package. It is available for immediate inspection under power, and available at short notice. Single-shift operated. Further information available on request.

Condition: defective spare-parts repository (used), Year of construction: 2000, functionality: not functional, machine/vehicle number: R2D N2802, turning diameter: 32 mm, The machine is still powered but not operational. The turret sub-spindle is defective. Dkodpfxoxrdq Ue Ah Usw

Condition: good (used), Year of construction: 2015, controller manufacturer: OKUMA, controller model: OSP P300S, number of spindles: 2, CONTROLS .. CNC controls OKUMA OSP P300S BASIC FUNCTIONS .. number of spindles: 2 .. number of turrets: 1 .. live positions: yes .. number of c-axes: 2 .. number of y-axes: 1 .. number of b-axes: 1 WORKING RANGE TURNING .. swing diameter (max): 650 mm .. turning diameter (max): 650 mm .. bar diameter (max): 112 mm .. worpiece length max.: 2100 mm MAIN SPINDLE .. spindle revolutions (min): 30 /min .. spindle revolutions (max): 3000 /min .. spindle torque: 700 Nm .. spindle diameter: 112 mm .. spindle positioning: 0.001 ° .. c-axis: yes COUNTER SPINDLE .. spindle revolutions (max): 3800 /min .. spindle positioning: 0.001 ° .. c-axis: yes X/Z SLIDE .. Z-axis travel: 2100 mm .. X-axis travel: 695 mm .. Y-axis travel: 300 mm .. rotating range B-axis up to: 240 ° .. traverse velocity Z (max): 1000 mm/min .. traverse velocity X (max): 1000 mm/min .. traverse velocity Y (max): 1000 mm/min .. tool fixture: Milling Spindle .. - rotation speeds (max): 12000 /min .. - drive power: 22 kW TOOL MAGAZINE .. number of positions: 40 .. tool length max.: 400 mm .. tool weight max.: 10 kg X/Z SLIDE .. Z-axis travel: 1584 mm .. X-axis travel: 235 mm .. - counter spindle: yes ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 6000 mm .. space requirements -front/back-: 3050 mm .. total height: 3030 mm .. total weight approx.: 19000 kg Dsdpfxjxm Rtls Ah Ujkw -Big Bore left spindle: Spindle holder A11 (Din 55026) Chuck is a SMW KNCS-N 325-104 - Tool holder (top) Milling spindle (Capto C6)

Condition: used, Year of construction: 1999, max. bar material dia. 42 mm max. turning diameter 180 mm turning length 350 mm control FANUC 18i Main-/Counter -spindle turning speeds 6.000 U/min number of tapers in turret head 2 x 12 tool taper VDI 25 travel -x axis 170 mm travel -z axis 350 mm CNC Turning- and Milling Center | SCHAUBLIN - 42S TM-6 with main and sub-spindle, 2x turrets aligned for driven tools and equipped with a bar feeder. The machine has 7.856h running hours. The machine is in good condition and can be inspected under power. Dsdpfsxlugmox Ah Uskw For further technical details, please refer to the attached offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: 42STM-6 | 42STM | 42STM6 | 42 S TM-6

Condition: good (used), Year of construction: 2008, Extensive partial overhaul since November 2023: - All ball screws including bearings overhauled: X1/X2/Y1/Z1/Z2 - All cylinders overhauled - All Siemens motors overhauled: main spindle, tailstock, magazine, tool 1+2, X/Z/Y/B/C/U/W - Siemens control panel replaced, control module and LT module repaired - Clamping elements/ATC renewed: Ortlieb collet, clamping package incl. pull rod - Tailstock quill renewed - All wipers replaced and covers reworked - Drive belts and safety windows renewed - Various cables renewed Technical details turning diameter 1000 mm turning length 1500 mm control Siemens 840 D swing over bed 1000 mm swing diameter over slide rest 800 mm max. workpiece weight between centres 2000 kg main spindle speeds: 2000 rpm Djdpfxsxlq Iyo Ah Uskw main drive 62 kW transmission ratio 4 milling spindle drive 37 kW milling spindle turning speed range: 25 - 10000 rpm total power requirement 82 kVA weight of the machine approx. 29,0 t dimensions of the machine approx. 8,2 x 5,3 x 3,6 m * CNC Control SIEMENS 840 D * Swivelling milling head at the top (B axis), interpolating, HSK-A 63 * Y axis * C axis * 8-station turret at the bottom, for driven tools * 60-station tool changer * NC-controlled tailstock, quill diameter 150 mm, max. quill stroke 180 mm * Hydrostatic longitudinal guide in the Z-axis * Coolant system with paper belt filter * Chip conveyor * Oil-cooler, make SCHIMPKE * Extraction system * Power chuck, make FORKARDT, diameter 500 mm

Condition: good (used), Year of construction: 1990, Ref. -No.: 10542 Manufacturer: GILDEMEISTER Type: AS - 16 Year of construction: 1990 Max. Rod diameter: 16 mm Number of spindles: 6 Pcs Djdpsxmd Txjfx Ah Uokw Guide rod length: 3,3 m

Condition: excellent (used), Year of construction: 2016, operating hours: 20,000 h, functionality: fully functional, controller manufacturer: Mazak, power: 6 kW (8.16 HP), laser hours: 20,000 h, laser power: 6,000 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, table length: 3,000 mm, table height: 1,500 mm, control type: CNC control, degree of automation: automatic, sheet thickness stainless steel (max.): 20 mm, laser type: fiber laser, laser source manufacturer: IPG, actuation type: electric, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, We offer for sale a Mazak Optiplex 3015 Fiber laser cutting centre, 2 - 6 kW. Year of manufacture: 2016. Fiber/solid-state IPG source. 20,000 operating hours. Excellent condition, the machine is well-maintained and operated in a clean environment. Includes extraction unit. 2 interchangeable tables. Automatic nozzle change and calibration. Pierce, cutting, and plasma detection. Beam alignment camera. Fully functional, no known faults or issues. Operated in two-shift mode. Available for sale around January 2026. Dkedpfxexfr Uns Ah Usw

Condition: used, Year of construction: 2006, BIGLIA B 301 LATHE Dedpoxtiuusfx Ah Uokw CNC FANUC Series 21i - T 2-AXIS LATHE COMPLETE WITH DOCUMENTATION YEAR OF FIRST INSTALLATION: 2006

Condition: used, Year of construction: 2016, spindle speed (max.): 12,000 rpm, controller manufacturer: OKUMA, controller model: OSP P300S, number of spindles: 2, CONTROLS .. CNC controls OKUMA OSP P300S BASIC FUNCTIONS .. number of spindles: 2 .. number of turrets: 1 .. live positions: yes .. number of c-axes: 2 .. number of b-axes: 1 SPINDLE / HEAD .. - positioning/indexing: 0.001 ° .. spindle revolutions (max): 12000 /min .. tool fixture: HSK A63 .. drive power: 22 kW WORKING RANGE TURNING .. turning diameter (max): 650 mm .. bar diameter (max): 95 mm MAIN SPINDLE Dodpfx Aoxm Rtfoh Ujkw .. spindle revolutions (max): 3000 /min .. drive power: 32 kW .. spindle torque: 955 Nm .. spindle diameter: 112 mm .. spindle bore diameter: 95 mm COUNTER SPINDLE .. spindle revolutions (max): 4000 /min .. drive power: 26 kW .. spindle torque: 420 Nm X/Z SLIDE .. Z-axis travel: 1600 mm .. X-axis travel: 695 mm .. Y-axis travel: 300 mm .. rotating range B-axis up to: 210 ° .. number of tool positions (total): 12 TOOL MAGAZINE .. number of positions: 80 .. tool diameter max.: 90 mm .. - with free neighbour positions: 130 mm .. tool length max.: 400 mm ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 4480 mm .. total height: 3030 mm .. total weight approx.: 18000 kg ATTACHMENTS (TURNING) .. chip conveyor: yes .. hydraulic system: yes .. European CE standards: yes

Condition: excellent (used), Year of construction: 2020, operating hours: 8,977 h, functionality: fully functional, machine/vehicle number: MM0008-000192, turning length: 1,020 mm, turning diameter: 540 mm, spindle motor power: 22 W, spindle speed (max.): 5,000 rpm, spindle bore: 76 mm, travel distance X-axis: 565 mm, travel distance Y-axis: 170 mm, travel distance Z-axis: 1,050 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 26 m/min, rapid traverse Z-axis: 36 m/min, rotational speed (max.): 12,000 rpm, type of input current: three-phase, bar passage: 76 mm, total height: 2,805 mm, total length: 4,850 mm, chuck outer diameter: 210 mm, total width: 2,525 mm, bar diameter (max.): 65 mm, swing diameter over cross slide: 270 mm, spindle nose: A2#6, swing diameter over bed slide: 750 mm, overall weight: 12,000 kg, swing diameter over top slide: 540 mm, spindle diameter: 110 mm, Equipment: documentation/manual, Mastercam DOOSAN PUMA MX2100ST Machine Environment Dksdpexr Utmsfx Ah Uow Additional Mastercam Mill 3D license available for an extra price Owner sells FANUC 31i-B control 9-axis DOOSAN MX2100ST turn-mill centre was manufactured in 2020, featuring a swing over bed of 750 mm and a maximum working length of 1020 mm. It supports a bar working diameter of 65 mm and includes comprehensive Y, A, C1, C2, and B axis movements for versatile machining capabilities. Has milling spindle with Capto C6 taper, 18.5 kW and 12 000 RPM and 40 tool swing arm tool changer. A report on the maintenance and technical condition of the equipment can be received from the local dealer upon request.

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: X1T134, turning length: 650 mm, turning diameter over cross slide: 350 mm, spindle motor power: 7,500 W, spindle speed (min.): 3,500 rpm, spindle bore: 42 mm, Nett Colchester Alpha XT 1350 teach-in lathe Dkedpjxqyn Tsfx Ah Ujw The machine is in good condition and has only been used for study purposes

Condition: used, MAZAK Integrex 100 III ST CNC: MAZATROL 640 MT PRO Swing over Cross Slide: 545 mm Maximum Machining Diameter (Milling Head): 545 mm Maximum Machining Diameter (Lower Turret): 400 mm Maximum Machining Length: 753 mm X-Axis Travel: 410 mm Z-Axis Travel: 805 mm Y-Axis Travel: 140 mm X2-Axis Travel: 220 mm Z2-Axis Travel: 780 mm W-Axis Travel: 795 mm Rapid Traverse (X/Z-Axis): 30/33 m/min Rapid Traverse (X2/Z2-Axis): 30/33 m/min Rapid Traverse (Y-Axis): 26 m/min Rapid Traverse (W-Axis): 30 m/min Main Spindle Bore Diameter: 51 mm Sub Spindle Bore Diameter: 51 mm Main Spindle Speed Range: 35 – 6,000 rpm Sub Spindle Speed Range: 35 – 6,000 rpm Main Spindle Motor Power: 11 kW Sub Spindle Motor Power: 11 kW Main Spindle Maximum Torque: 16.4 kgf·m Sub Spindle Maximum Torque: 16.4 kgf·m Tool Magazine: 40 tools, KM63 Milling Spindle Speed: 15–12,000 rpm Lower Turret Stations: 8 C-Axis on Main Spindle C-Axis on Sub Spindle Dkodpfxsxl Eq Aj Ah Uew C-Axis Indexing: 0.001 degrees Driven Tools Main Spindle Chuck: KITAGAWA B-206, Ø170 mm Sub Spindle Chuck: KITAGAWA B-206, Ø170 mm Tool Presetter Chip Conveyor Machine Weight: 7,600 kg

Condition: used, Year of construction: 2005, Lot consists of: Dsdsxf Avispfx Ah Uskw (1) Tire Testing Machine Technical details: Test wheel: 67", max. speed: 320 km/h, max. load: 2,500 kg, camber angle: 0–5° (2005)

Condition: excellent (used), Year of construction: 2003, operating hours: 8,000 h, functionality: fully functional, machine/vehicle number: A8A R19 52, turning length: 225 mm, turning diameter over cross slide: 250 mm, turning diameter: 80 mm, spindle motor power: 4,400 W, spindle speed (min.): 300 rpm, spindle speed (max.): 6,300 rpm, spindle bore: 25 mm, travel distance X-axis: 100 mm, travel distance Z-axis: 300 mm, bar diameter (max.): 25 mm, quill stroke: 50 mm, Equipment: documentation/manual, Additional info : 12-station tool turret for VDI16 quick change tools bi-directional logic for driven tools Dedpexvb Thsfx Ah Ujkw

Condition: good (used), Year of construction: 2008, turning length: 1,500 mm, turning diameter: 420 mm, Manufacturer: MAZAK Type: QTN 350 II MY Control: Mazatrol Matrix Nexus Year of Manufacture: 2008 Specifications Metric US Standard Max. Turning Diameter 420 mm X-Axis 257 mm Y-Axis 152 mm Z-Axis 1607 mm Spindle Bore 102 mm Speed 3300 rpm Spindle Power Dodpfx Aewaikxsh Uokw 30 kW Tool Changer 12-Speed Driven Tool Power 4000 rpm Driven Tool Power 7.5 kW Quill Mount 5 Mk Quill Stroke 200 mm Dimensions (Estimate) Length 5000 mm Width 2100 mm Height 2200 mm Weight 8600 kg Please note: The information on this page has been compiled to the best of our knowledge and belief, and where possible, by the manufacturer. This information is provided in good faith, but its accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contractual terms. We recommend that you review all important details.

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 88036, Boley Evoluturn BE 42 CNC Bar Turning Machine – Year of manufacture 2006 – with LNS Quick Load Servo 3 and LNS Turbo MH500 For sale is a Boley Evoluturn BE 42 CNC lathe from 2006, equipped with an LNS Quick Load Servo 3 (year 2004) and an LNS Turbo MH500. The machine is in working condition and can be demonstrated under power. Specifications: - Manufacturer: Boley - Model: Evoluturn BE 42 - Year of manufacture: 2006 - Condition: fully functional - Machine number: 88036 - Mains voltage: 3/PE ~50Hz 400V - Control voltage: 24 V AC/DC - Power: 14 kVA - Rated current: 20 A Dedpfx Aexr Nr Reh Uekw - Weight: 3,300 kg Included: Bar feeder: LNS Quick Load Servo 3 - Year of manufacture: 2004 Chip conveyor: LNS Turbo MH500 - Year of manufacture: 2011 - Model number: 57008051E - Serial number: 209812 Inspection: Monday–Friday by appointment Location: 82152 Krailing The machine is operational and can be tested if interested.

Condition: used, 2 CNC turning-milling centers CTX 410 - YOM 2005 and 2007 Heidenhain Plus IT control - 3-jaw chuck - driven tool stations - tailstock - chip conveyor Dkedpjxlthvefx Ah Uow - coolant tank

Condition: used, Year of construction: 2001, functionality: fully functional, Turning / Milling / Drilling Center Manufacturer: Gildemeister Model: TWIN 500 Year of manufacture: 2001 Control: SINUMERIK 840 D Max. swing diameter: 610 mm Max. longitudinal travel: 1470 mm Tool holder: Spindle HSK A62 Milling spindle speed: 12 min. Turning spindle speed: 20 - 3200 rpm Rapid traverse speed: X = 46 m/min, Y = 24 m/min, Z = 60 m/min Milling spindle: 15 kW Turning spindle: 74 kW Chip conveyor: 150 kg/h The machine is still under power and can be inspected. Djdpfx Ahsxq Tkue Ujkw The machine was used for manufacturing parts for the aerospace industry. The machine is continuously maintained. All information provided without guarantee. Ex foundation Subject to prior sale.

Condition: new, Year of construction: 2025, turning diameter: 350 mm, spindle bore: 65 mm, travel distance X-axis: 200 mm, travel distance Z-axis: 550 mm, overall weight: 5,650 kg, 2-Spindle CNC Lathe with Y-Axis – Model CTXY52-S Machine Description The STS CTXY52-S is a high-precision, high-performance CNC turning center featuring two spindles, a driven turret (BMT55), and a Y-axis (±45 mm travel). Specifically designed for complex turning and milling operations in a single setup, it is ideal for precise, efficient series production. The machine is equipped with the FANUC Oi-TF Plus control system, providing intuitive operation, real-time monitoring, and support for both conversational and G-code programming. Key Features • 2 spindles (main and sub-spindle) for complete machining without the need for reclamping • FANUC Oi-TF Plus CNC control – powerful, proven, and user-friendly • 15-station driven BMT55 turret with high rigidity and rapid tool change • Y-axis ±45 mm – enables milling, drilling, and off-center machining • 30° slant bed design for optimal chip removal and ergonomic handling • One-piece machine bed for superior damping and stability • Coolant system and oil chiller for consistent precision and long service life • Main spindle A2-6, sub-spindle A2-5 – both with high torque capacity Dsdoxl Eqpepfx Ah Uskw • Fast tool changes and compact design Technical Data CTXY52-S Parameter Value Max. turning diameter (in chuck, discs): Ø 740 mm Max. turning diameter: Ø 350 mm X-axis travel: 200 mm (optionally 400 mm) Z-axis travel: 550 mm Y-axis travel: ±45 mm (90 mm total) Main spindle: A2-6 Spindle bore: Ø 65 mm Bar capacity: Ø 52 mm Sub-spindle: A2-5 Sub-spindle bore: Ø 55 mm Rapid traverse X/Z: 25 m/min Machine weight: approx. 5,650 kg Dimensions (L×W×H): 3,030 × 2,045 × 2,050 mm

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, turning length: 1,500 mm, turning diameter over cross slide: 456 mm, turning diameter: 400 mm, spindle motor power: 22 W, spindle speed (min.): 12 rpm, spindle speed (max.): 3,500 rpm, spindle bore: 80 mm, travel distance X-axis: 240 mm, travel distance Z-axis: 1,605 mm, rapid traverse X-axis: 12 m/min, rapid traverse Z-axis: 15 m/min, rotational speed (max.): 3,500 rpm, rotational speed (min.): 12 rpm, quill travel distance: 120 mm, swing diameter over bed slide: 600 mm, Equipment: documentation/manual, rotational speed infinitely variable, For sale is a ready-to-use Mori Seiki SL35 MC with steady rest and accessories. Inspection under power can be arranged by appointment. Dkedpfxsxtqyre Ah Uow

Condition: like new (used), Year of construction: 2011, functionality: fully functional, spindle motor power: 15,000 W, spindle speed (min.): 5,000 rpm, travel distance X-axis: 157 mm, travel distance Y-axis: 35 mm, travel distance Z-axis: 464 mm, rotational speed (max.): 6,000 rpm, total height: 1,885 mm, total length: 3,675 mm, total width: 2,258 mm, overall weight: 9,000 kg, CNC controller: Fanuc 18i-TB Capacity X-axis travel mm: 157,5 Y-axis travel mm: 35 Z-axis travel mm: 464,8 B-axis travel mm: 600 C-axis: 360º (0,001º) Turning length mm: 399 Max. turning diameter mm: ø: 190 Distance between spindle centers mm: 750 Bar work capacity mm: 52 Upper turret Number of tool slots St .: 12 Speed driven tools RPM: 6.000 Drive power driven tools kW: 5.5 / 3.7 Number of upper turrets: 1 Lower turret Number of tool slots St .: 12 Speed driven tools RPM: 6.000 Drive power driven tools kW: 5.5 / 3.7 Milling function: Both Turrets Number of lower turrets: 1 Main spindle Speed spindle rpm: 5.000 Drive power spindle kW: 15 / 11 Counter spindle Speed spindle rpm: 4.500 Drive power spindle kW: 11 / 7.5 Equipment Part catcher Workarea light Bar Loader ILS - RBK Machine running time: Nominal Kva: 67,2 Basic machine dimensions / weight Length mm: 3.675 Width mm: 2.258 Dodpfsxiwnnsx Ah Uokw Height mm: 1.885 Weight kg: 9.000

Condition: good (used), Year of construction: 1994, operating hours: 18,480 h, functionality: fully functional, machine/vehicle number: 80821, turning diameter: 250 mm, spindle motor power: 15,000 W, Boley BDN 160 Lathe – Year 1994 – Fully Functional For sale is a reliable Boley BDN 160 lathe, year of manufacture 1994. The machine is in working condition and ready for immediate use. Technical details (excerpt): Manufacturer: Boley Model: BDN 160 Year of manufacture: 1994 Condition: functional Dsdpfoxr Nmbex Ah Uekw Inspection: Monday–Friday by appointment The machine can be tested and inspected on site.

Condition: good (used), Year of construction: 2012, machine/vehicle number: 00470000181, - Swing over bed: 700 mm - Over slide: 380 mm - Tailstock travel: 800 mm - Spindle flange turning diameter: 220 x 5 mm - Chuck diameter: 250 mm Dsdpfowlawmex Ah Uokw - Tool cross-section: 25 x 25 mm

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Hello, I am offering for sale a renowned brand CNC lathe: DMG GILDEMEISTER CTX 420 Linear V4 with C-axis, Y-axis, and driven tools. The machine is in excellent technical and visual condition. _ Type: CNC Lathe Manufacturer: DMG GILDEMEISTER Model: CTX 420 V4 Linear Control: HEIDENHAIN 4290 + DIN PLUS interface for program generation Country of manufacture: Germany Year of manufacture: 2004 _ Machine specifications: - Turret: 12 tools with VDI 40 holders (all stations are driven) - Max spindle speed: 5,000 rpm - C-axis - Y-axis - Driven tools - Max turning length on Z-axis: 635 mm - Max turning diameter on X-axis: 325 mm - Spindle chuck BERG, diameter 200 mm - Max bar diameter: 66 mm - Coolant system - Hydraulic tailstock, programmable Dodpjxcupcofx Ah Uokw - Chip conveyor - Spindle drive power: 21 kW - LNS bar feeder - Documentation (DTR) - Machine weight: 6 tons _ WHY IS IT WORTH BUYING MACHINES FROM PPM? - We offer our own stationary and mobile service support - We have sold over 700 DMG machines - We can commission the machine at the customer's site - Operator training and delivery included in the price - All our machines undergo a professional technical inspection and are ready for operation - The machine can be purchased via installment plan or leasing.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, I have for sale a renowned brand CNC LATHE GILDEMEISTER CTX 310 V3 with driven tools, C axis. _ Type: CNC Lathe Manufacturer: GILDEMEISTER Model: CTX 310 V3 Control: HEIDENHAIN 4290 + TURN PLUS Overlay Country of manufacture: Germany Year of manufacture 1999 _ Machine parameters: - head: 12 - tools for VDI 30 holders (Every second socket driven) - max. rpm 6300/min. - max. turning length in the Z axis: 455 mm - max. turning diameter in the X axis: 200 mm - C axis - driven tools - holder on the main spindle: Fi-200mm - max. shaft diameter Fi-51 mm - finished part collector - cooling system - chip conveyor Dkodpevmy Icjfx Ah Ujw - spindle drive power: 11 KW - DTR - machine weight: 3.2 tons _ WHY IS IT WORTH BUYING MACHINES in PPM? - we have our own service _ stationary and mobile - we have already sold over 700 DMG machines - possibility of starting the machine at the customer's - operator training and delivery of the machine to the customer included in the price - all our machines have undergone a professional technical inspection - 100% ready to work - purchase of the machine is possible through the installment system and leasing.