Used Center lathes 300-399mm turning diameter over bed for sale (195)

Condition: ready for operation (used), Year of construction: 1987, Lathe Make Heidenreich & Harbeck type Hanseat 480 YEAR 1987 center height 255 mm turning diameter over support 300 mm center distance 1500 mm 24 speeds from 23.6 to 2500 n1/min tailstock MK 4 chuck F 250 digital display make Heidenhain motor 380 volt 11 kw transport dimension: length 3200 mm width 1200 mm height 1550 mm Fslqx Sajpviqioujpg Weight 2,5 to.

Condition: like new (used), Weiler center lathe model Condor 81 lead and feed spindle lathe with 3-axis digital display from Heidenhain ND780 Geometrically overhauled with acceptance certificate for tolerances of new machines Technical data: >> Machine no. 86-498 >> Center height 165 mm >> Center width 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle passage 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feed rates from 0.015 to 0.46 mm / rev >> Possible threads metric, inch, module and diametric pitch Folqxsq Tpahj Sauopg >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 Kg >> Spindle brake can be switched on >> Length 1.83 m, height 1.29 m, depth 0.88 m Accessories and equipment: >> 3-axis digital display from Heidenhain ND780 Reconditioned >> Quick-clamping device, collets as good as new from 2 to 30 mm, 1 mm increasing >> Three-jaw chuck Röhm 200 mm with 2 sets of jaws As good as new >> Mulifix size E with 4 steel holders NEW >> Bed stop >> Electric chuck protection >> Machine lamp LED New >> Rear wall >> Operating instructions >> Coolant system >> Machine feet About the machine: Offered is a Weiler Condor 81 guide and feed spindle lathe in a geometrically reconditioned condition, absolutely as good as new. The guides have been reground or re-scraped. With acceptance according to test report. 6 month guarantee. A very nice machine with electronic spindle protection. The accessories collet, chuck, multifix are new or as good as new. Spindles, spindle nuts, bearings, belts, scrapers have been replaced. Take the opportunity to view this machine on site under power and see for yourself its condition. A protective cover for the guide and feed spindle can be fitted for an additional charge.

Condition: refurbished (used), Gap Bed machine Between centers: 60” Swing over bed: 22" Spindle speeds: 18 - 1400RPM Foloq N Ay Aeqx Sauepg Spindle bore: 3 1/2" Diameter 90mm Chuck mounting: D1 - 11 Tailstock taper: No 5 Morse Tool Post: Quick Change 4 holders & Keys New 3 Jaw Chuck Coolant New 2 Axis DRO System Chuck guard TBC 6-month warranty

Condition: ready for operation (used), Year of construction: 1999, Functionality: fully functional, spindle bore: 40 mm, center height: 175 mm, turning length: 800 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 25 rpm, used L+Z lathe GDW type MS-175, center height 175mm, Fjlqx Sajvvhfnsuspg center width 800mm, spindle speeds 50-2500 rpm, spindle bore 40mm, 2-axis digital display ACU RITE, 1x three-jaw lathe chuck Ø 200mm, Multifix steel holder size B, chuck guard electrically secured, coolant pump. The machine is in stock at our warehouse in 71334 Waiblingen-Beinstein and is available immediately.

Condition: reconditioned (used), Functionality: fully functional, spindle bore: 56 mm, center height: 180 mm, center width: 1,000 mm, Dear Sir or Madam, For sale is a Weiler Commodor B lathe with a new 3-axis digital readout from K+C (including a 12-month manufacturer's warranty). The machine is undergoing a comprehensive partial overhaul in our workshop, meaning it is in excellent technical, geometric, and visual condition. You are welcome to visit us for a closer look. Availability: upon request Center height: 180 mm Center distance: 1000 mm Spindle bore: Ø 56 mm Max. spindle speed: 2000 rpm Tailstock taper mount: MK4 Folqx Saswhzivjuopg Feed range: 0.026 - 0.888 mm/rev Possible thread types: Metric, inch, module, diametrical pitch Metric thread pitches: 0.35 - 12 mm Spindle brake: switchable Power consumption: 4 kW Dimensions: approx. 2.2 x 1.5 x 1 m (L x H x W) Weight: approx. 1.8 t Further equipment and accessories: 3-axis digital readout K+C NEW, coolant system, chuck guard, removable chip tray, operating instructions, and much more upon request... Our service promise to you: - We are a certified master craftsman in the field Mechanical Engineering - All machines undergo at least a workshop inspection. - All lubricants and any worn parts are replaced in advance. - Upon request, we can fully or partially overhaul the selected machine. - Upon request, we can repaint the selected machine in your desired color. - Upon request, you can order additional accessories such as tools, etc. directly. - Upon request, we can install additional accessories such as safety devices, etc. - We are happy to take care of shipping and/or delivery.

Condition: good (used), Internal Article No.: 25013 Lead and Feed Lathe Nardini MS 175E Year of Manufacture: 1986 The machine is equipped as follows: - Multifix base holder including 2 tool holders - MT3 drill chuck - 2 live center centers - Operating instructions / electrical diagram - 185E collet chuck, including one collet - 2 lynette chucks - Chuck flange - 6 machine feet Technical specifications: Center distance: 800 mm Center height: 175 mm Tailstock mount: MT3 Quill stroke, tailstock: 130 mm Total power requirement: 4.8 kW (380 V / 16 A) Spindle head mount: DIN 55022 / Size 5 Spindle bore: 46 mm Fpslqx Sswdu R Soaujg Speed range: 25 - 2000 rpm. Bed width: 220mm Dimensions (LxWxH): 220 x 150 x 120cm Weight: approx. 1000kg The machine is fully functional and can be inspected with power on by prior arrangement.

Condition: excellent (used), Lathe Make Weiler Type MD 125 Collet chuck device Hand lever cross support Speed from 110 - 3600 n1/min approx. %0 Collets Adapter for bell collets Coolant device SPH 125 mm SPW 400 mm 380 volt 1.5 kw Fpjlqx Sastgnhujueg

Condition: excellent (used), Year of construction: 1988, Functionality: fully functional, Weiler center lathe model Condor 81 Lead and feed spindle lathe with 3-axis digital readout Heidenhain Technical data: >> Year of construction 1988 Machine no. 88-955 >> Center height 165 mm >> Center width 750 mm >> Spindle speed : from 22 to 2800 rpm >> spindle clearance 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feed rates from 0.015 to 0.46 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake can be activated >> Length 1.83 m, height 1.29 m, depth 0.88 m Accessories and equipment: >> 3-axis digital readout Heidenhain >> 1 piece three-jaw chuck new with 2 sets of jaws >> Collet chuck device collets from 3 to 30 mm 40 collets partly double >> Mulifix size B with 3 steel holders >> Bed stop Felqotlu Scjx Sauepg >> Machine feet >> Drill chuck >> Rotating center point For safety: >> Cover for lead and feed spindle >> 2 emergency stops >> Spindle brake To the machine : We are offering a used Weiler Condor 81 lathe built in 1988 in very good condition. The machine is of course fully functional. The lead and feed spindles are covered for safety. A very robust and powerful machine. The 3-axis digital readout from Heidenhain makes working even easier and more precise. The machine has been electrically and mechanically tested by us. A complete oil change was carried out. This new generation of Weiler lathes is very user-friendly. Take the opportunity to view and try out this machine under power on site.

Condition: good (used), Functionality: fully functional, Voest DA 160 Rotation range: 330 x 600 Speeds: 30 - 2500 Multifix A with 5 holders, 3-jaw chuck 160, new, keyless chuck, live center, spindle brake, emergency stop. Condition: Good, guides and smooth running very good. Dimensions: L 1.45m D 0.8m H 1.38m Fpjlowhufwsqx Saujg Can be inspected under power, of course. Free shipping, D-88433 Schemmerhofen ATTENTION: Anonymous inquiries without a valid phone number will not be answered.

Condition: new, Center length ----- 1000 mm Center height ----- 180 mm Spindle diameter ----- 360 mm Main spindle passage ----- 52 mm Bed width ----- 187 mm Spindle speed ----- 90-2000 rpm Motor ----- 1.5 KW Fpslqoga Tz Hsx Sausg INCLUDED * 3-axis digital readout brand SINO * Quick-change chisel holder type Multifix TOOE5 with 4 barrels * Electric brake * 3-D chuck 200 mm * 4 Chuck 200 mm * Clamping plate 250 mm * LED lighting and cooling system * Fixed and moving glasses * Box with various tools

Condition: reconditioned (used), Functionality: fully functional, spindle bore: 40 mm, center height: 160 mm, center width: 650 mm, Dear Sir or Madam, For sale is a Weiler Praktikant 160B lathe with a new 3-axis digital readout from K+C (including a 12-month manufacturer's warranty). The machine is undergoing a comprehensive partial overhaul in our workshop, so it is in excellent technical and visual condition. All guides are in working order, the gears run quietly, and the levers shift easily. You are welcome to visit us to see the condition for yourself. Fpslowhzdmeqx Sausg Availability: upon request Center height: 160mm Center distance: 650mm Spindle bore: Ø 40mm Tailstock taper mount: MT3 Quill stroke: 85mm Longitudinal slide feed range: 0.020 - 0.630 mm/rev Cross slide feed range: 0.006 - 0.200 mm/rev Possible thread types: Metric, inch, module, diametrical pitch Metric thread pitches: 0.25 - 8mm Spindle brake: switchable Total connected load: 7.5 kvA Voltage: 400V Dimensions: approx. 1.58 x 0.9 x 1.5 m (L x H x W) Weight: approx. 720 kg Other equipment and accessories: NEW 3-axis digital readout, coolant system, chuck guard, guide rail & Pulley cover, 2 emergency stops, operating instructions, and much more upon request... Our service promise to you: - We are a certified master mechanical engineering company - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - Upon request, we can fully or partially overhaul your selected machine - Upon request, we can repaint your selected machine in your desired color - Upon request, you can order additional accessories such as tools, etc. directly - Upon request, we can install additional accessories such as safety devices, etc. - We are happy to take care of shipping and/or delivery

Condition: good (used), Year of construction: 1998, Equipment: documentation/manual, AVM Angelini Snupy two-axis lathe The AVM Angelini two-axis lathe has 42 mm bar passage. The machine is equipped with a two-axis turret Main characteristics of the AVM Angelini lathe model SNUPY: DIAM. AUTOCENTRATING : 210 mm Height of centers 190 mm Distance between centers 500 mm Bar passage 42 mm X-axis travel 275 mm Z-axis cosrsa 400 mm Rapid X-axis 16 m / min Rapid Z-axis 20 m / min Spindle nose ASA Fslotu Hqcjqx Sauepg 5 " Spindle power 15 Kw Maximum spindle speed 3,500 RPM / MIN. Numerical Control Fanuc Series 0 - T Year of construction 1998

Condition: good (used), Weiler Condor VS 2 center lathe and feed spindle lathe Technical data: Center height 160 mm Center width 800 mm Fpslqsu E H Iwex Sauog Spindle bore 40 mm Bed width 240 mm Speeds 12 - 2800 min-1 Drive power 3 kW Tailstock holder MK 3 Quill stroke 110 mm Feed rates 0.037 - 1.253 mm/rev Weight, approx. 800 kg Dimensions (WxDxH), approx. 1930 x 880 x 1470 mm Equipment: 3-jaw lathe chuck Quick-change holder system Multifix size A incl. 1 change holder Electrically locked chuck guard Brake motor retrofitted Bed stop Emergency stop button Coolant device Machine light Chip back panel ELESTA 3-axis digital display Moving tip The machine has been technically inspected and is in very good condition. Backlash face spindle 0.2mm Top slide backlash 0.15mm Inspection under power possible at any time. Price net free loading ex warehouse

Condition: excellent (used), BREDA BRF 150 X 800 mm Parallel Lathe Fsleif Rrzoqx Sauepg Machine from school closure. Very good condition, ready to 'use. Height of centers: 150 mm Distance between centers: 800 mm Turning diameter on the carriage: 185 mm Self-centering chuck with 3 jaws : Diam. 160 mm Rotational speed: 47 - 1440 Rpm Bar passage: 42 mm Tool turret included Bench width: 260 mm Tailstock attachment: C.M.3 Bezels supplied 4-jaw plateau supplied Tailstock supplied

Condition: good (used), Year of construction: 2004, Emcomat 17 S with CE, built in 2004 Rotation range: 340 x 700 Speeds: 30 - 2500 Multifix B with 4 holders, 3-jaw chuck 200 mm, keyless drill chuck, live center. Electrically monitored chuck guard, power-on monitor, spindle brake, splash guard, covered L + Z spindle. Dimensions: L 1.6 m, D 0.85 m, H 1.3 m Fpolewhufkeqx Saujg Condition: Good, guides and smooth running in good condition, fully functional. Can be inspected under power, of course. Free shipping, D-88433 Schemmerhofen ATTENTION: Anonymous inquiries without a valid phone number will not be answered.

Condition: used, Year of construction: 1980, Weiler Condor VS2 lathe with 3-axis Heidenhain digital display, built in 1980, four-jaw chuck, Multifix with 3 holders. Machine in very good, operational condition, comes from a training workshop. Ready to demonstrate with power on by arrangement. Fjlqovx Sw Hjx Saujpg

Condition: reconditioned (used), Functionality: fully functional, center height: 160 mm, center width: 650 mm, rotational speed (max.): 4,000 rpm, Equipment: rotational speed infinitely variable, Dear Sir or Madam, For sale is a Weiler Primus VC / Praktikant VC lathe. This model series is particularly distinguished by its Siemens control panel and completely stepless speed control. As the name suggests, the VC can operate at a constant cutting speed. The machine has undergone a comprehensive partial overhaul in our workshop, so it is in excellent technical and visual condition. All guides are in working order, the gears run quietly, and the levers shift easily. You are welcome to visit us to see the condition for yourself. Availability: upon request Center height: 160 mm Center distance: 650 mm Spindle bore: Ø 40 mm Tailstock taper mount: MT3 Quill stroke: 85 mm Possible thread types: Metric, inch, module, diametrical pitch Metric thread pitches: 0.25 - 8 mm Spindle brake: switchable Voltage: 400 V Fslewhx I Nsqx Sauepg Dimensions: approx. 1.60 x 1.00 x 1.50 m (L x H x W) Weight: approx. 750 kg Other equipment and accessories: Siemens control panel, coolant system, chuck guard, lead screw and feed screw covers, 2 emergency stops, operating instructions, CE declaration of conformity, and much more upon request... Our service promise to you: - We are a certified master craftsman in the field of mechanical engineering - All machines undergo at least a workshop inspection - All lubricants and any worn parts will be replaced in advance. - Upon request, we can fully or partially overhaul the selected machine. - Upon request, we can repaint the selected machine in your desired color. - Upon request, you can order additional accessories such as tools, etc. directly. - Upon request, we can install additional accessories such as safety devices, etc. - We are happy to take care of shipping and/or delivery.

Condition: good (used), Functionality: fully functional, Center height 190 mm Felqewcdwlex Sauepg Center width 1000 mm Bed guide offset downwards and covered at the front

Condition: excellent (used), Year of construction: 1983, Functionality: fully functional, Weiler Center Lathe Model Condor 81 Lead and Feed Lathe with 3-Axis Digital Readout from K&C NEW Technical Specifications: >> Year of Manufacture 1983 Machine No. 83-067 >> Center height 165 mm >> Center width 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MT 3 >> Feed rates from 0.015 to 0.46 mm/rev >> Possible threads: metric, inch, module, and diametrical pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake can be switched on >> Length 1.83 m, height 1.29 m, depth 0.88 m Accessories and Equipment: >> New 3-axis digital readout from K&C, 12-month manufacturer's warranty with operating instructions Functions: mm/inch switching, ABS/INC coordinate selection, halving of the display value, reference mark, 200 tool programming, cone calculation, radius/diameter, quick zeroing, counting direction switching >> 1 new three-jaw chuck, 160 mm, 2 sets of jaws >> New collet chuck and new collets from 3 to 26 mm, 1 mm increments >> Multifix size B with 3 tool holders >> Electronic spindle protection >> Rear panel Fpslqjwb Supex Sauog >> Coolant system >> Machine feet About the machine: Offered is a used Weiler Condor 81 in very good condition. The machine is, of course, fully functional. A very robust and powerful machine. The new 3-axis digital readout from K&C makes work even easier and more precise. The machine has been electrically and mechanically tested by us. A complete oil change was also performed. This newer generation of Weiler lathes is very user-friendly. Take advantage of the opportunity to view and try out this machine live on-site.

Condition: good (used), Functionality: unexamined, machine/vehicle number: 160378, turning diameter over cross slide: 180 mm, spindle bore: 40 mm, turning diameter: 375 mm, center height: 160 mm, turning length: 750 mm, total length: 2,500 mm, total width: 1,000 mm, total height: 1,500 mm, rotational speed (max.): 3,000 rpm, rotational speed (min.): 38 rpm, overall weight: 2,500 kg, - Operating voltage: 380 V - Largest workpiece diameter over cheek: 375 mm - Largest workpiece diameter over cross support: 180 mm - Spindle taper: Morse 5 - Collet passage: 24 mm - Fine feeds longitudinal and transverse: 0.015 to 0.21 mm/rev - Longitudinal and transverse feeds: 0.025 to 0.35 mm/rev - Cross support path on the cheek: 750 mm - Tool slide path: 120 mm - Cross slide path: 215 mm - Center height above tool slide: 32 mm - Steel cross section: 20 x 20 mm - Tailstock quill taper: Morse 3 - Quill path: 120 mm - Lateral adjustment: +/- 10 mm Fpslqxev Irh De Sausg Equipment: - Incl. documentation - Matching workshop cabinet including accessories

Condition: good (used), Functionality: fully functional, Weiler Condor B in good condition Rotation range 330 x 800 Speeds 22 - 2800 3-axis digital, 3-jaw key bar chuck 160 with multiple jaw sets, live center, keyless drill chuck, Fslqx Sajwhub Ejuspg coolant system, Multifix B with 4 holders. Safety features: electrically monitored chuck guard, start-up protection, spindle brake, splash guard, 2 emergency stops. Condition: Good, guides and smooth running in good condition, fully functional. Dimensions: L 1.84m D 0.88m H 1.45m Can be viewed with power on, of course. Free shipping, D-88433 Schemmerhofen ATTENTION: Anonymous inquiries without a valid phone number will not be answered.

Condition: good (used), Year of construction: 1999, Functionality: fully functional, GDW LZ 350 S Lathe + Accessories Manufacturer: GDW Type: LZ 350 S Condition: used Year of manufacture: 1999 Center height: 175 mm Rotation diameter over bed mm 310 Rotation diameter over cross slide mm 195 Center distance 800 mm Spindle head DIN 55027 size 5 Spindle bore mm 43 Collet bore mm 27 Inner taper similar to DIN 228 shortened ME 50 Chuck diameter normal/max. mm 160/200 Face and clamping disk diameter max. mm 315 Tool slide Cross slide travel mm 185 Top slide travel mm 115 Swivel range of the top slide 90/-65 degrees Tool system size B Tailstock with handwheel Quill stroke mm 110 Quill diameter mm 50 Mounting taper to DIN 228 3 MK 3 Gear stages 2 Spindle speeds V 45 70 90 110 140 175 220 350 rpm Spindle speeds W 250 400 500 630 800 1000 1260 2000 rpm Dimensions: 1810 x 900 x 1400 mm Weight: 800 kg Scope of delivery: Folewbqpfoqx Sauspg - Oroginal documentation - Three-jaw chuck - Digital display - Coolant system - Multifix B tool holder - Machine feet

Condition: excellent (used), Weiler Ergodor lathe Max. Turning diameter over bed: approx. 320 mm Max. Turning diameter over support: approx. 160 mm Max. Turning length: approx. 470 mm Bar passage: approx. 36 mm Fpoljq Ixxyjqx Sauog Spindle: Speed range: approx. 30 - 3550 rpm Spindle nose: A 2 - 5 Drive power: approx. 3.0 kW Automatic longitudinal & face feeds: Feed range: approx. 0.020 - 2.0 mm/rev Suitable for threads: - metric 0.20 - 12 mm Inch 80 - 2 Gg/ Diametral - Pitch thread 160 - 5.5 Dp Module 0.1 - 4

Condition: good (used), Functionality: unexamined, machine/vehicle number: 10279, turning diameter over cross slide: 200 mm, spindle bore: 35 mm, turning diameter: 300 mm, center height: 150 mm, turning length: 750 mm, total length: 1,860 mm, total width: 700 mm, total height: 1,800 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 40 rpm, overall weight: 1,030 kg, - Operating voltage: 380 V - Connected load: 3 kW - Nominal current: 25 A - Frequency: 50 Hz Fpolqxsv Irgto Saueg Equipment: - Tailstock - Multifix type B tool holder - Three-jaw chuck (diameter: 160 mm) - 2-axis digital display from the manufacturer RSF

Condition: good (used), Functionality: unexamined, turning diameter over cross slide: 178 mm, spindle bore: 35 mm, turning diameter: 280 mm, center height: 145 mm, turning length: 750 mm, total length: 1,700 mm, total width: 800 mm, total height: 1,800 mm, spindle speed (max.): 3,500 rpm, spindle speed (min.): 70 rpm, overall weight: 800 kg, - Operating voltage: 380 V - Frequency: 50 Hz - Rated current: 11 A Fpjlqjv Iqr Usx Saujg - Spindle nose: D 1-3 - Morse taper in head sleeve: 3 - Lead screw diameter: 25 mm - Thread: 6 mm pitch