Used Debarkers for sale (58)

Condition: like new (used), Functionality: fully functional, Completely restored guidework for debarker, as good as new Csbusq Dp Erj E N Tbegt

Condition: excellent (used), PTO shaft drive feed speed 28m/min. Stem diameter: 60 - 360 mm Cebjv H U N Ieu E N Tbegt

Condition: ready for operation (used), Year of construction: 1995, Feeding and centering conveyor, most suitable before CAMBIO debarking machines Cgebor Axxpeu E N Tbet

Year of construction: 2018, Condition: like new (used), HÄWA debarking - new Type H256 / 800 -made of a heavy-duty welded steel construction -4 pair master drive wheel -1 split, toothed few master drive wheel -Master drive frequency controlled -Milling arm made of a heavy-duty steel construction -Head: working width 300 mm, hammers, cutting blade and baking ring -Carbide tipped milling head -hydraulic lowering the milling head -Milling head feed frequency controlled Master drive wheel 800 mm diameter 0, 2 m - 1, 0 m stem length 1, 0 m - 6, 0 m total connected load 35kW-HBC radio remote control Cjbusdwidwe E N Tbegt -immediately available Model 2018

Year of construction: 1998, Condition: reconditioned (used), Round log rotor debarker with infeed VK600, MAX LOG DIAM 81 cm warranty time 6 month from delivery, delivery time 2 month from order Cjbuopbbmlo E N Tbogt

Condition: used, Year of construction: 2022, Functionality: fully functional, feed rate Y-axis: 700 m/min, Log peeler CAMBIO 45 AIR TEN. The peeler is sold after a major overhaul. 4. Bark conveyor. Csbu Eotcu Uas N Tbogt 5. Centering conveyor. 6. Log peeler CAMBIO 75, knife system CAM TOOL. 7. Additional rollers after the peeler.

Condition: reconditioned (used), Functionality: fully functional, CAMBIO 45, very good condition, fully functional. Cgobu Ejv Ag Rve N Tbst

Condition: good (used), log diameter 100-660mm transverse and longitudinal feeder included Cebu E Nev Ap Sio Tbegt

Condition: refurbished (used), What we have here : Cebuefhtlkj E N Tbsgt - for Cambio 35 we have 5 pcs of debarking knives including 2 new and 5 used, but fixed - for Cambio 45 we have 10 pcs used, but fixed knives - as an extra for Cambio 45 we have 1 cutting knive and 2 Pyramo knives - for driwing roller tensioning we have some spare parts

Condition: used, Häwa debarking Cebjdfd R Tou E N Tbogt Type H249 / 800 -Head: working width 300 mm, hammers, cutting blade and baking ring Carbide tipped milling head Master drive wheel 1000 mm diameter 0, 25 m - 1, 25 m stem length 1, 5 m - 6, 0 m with Cabinet and complete documentation

Condition: excellent (used), Functionality: fully functional, Round log rotor debarker, incl. infeed conveyor, outfeed guiding device, bark scraper conveyor. Main el.motor 55 kW, rotor opening diam 80 cm, Cgjbu E Nev A Ag Hj Tbst 5 debarking knives, min log length 3 m. Debarker is fully renovated in 2023 after in use in 2024 approx 1-2 months

Condition: good (used), I am selling a peeling line, brand FERRI VM 800, it peels logs up to 80cm in diameter. Cgobu Eov A I Hrs N Tbst The peeling line includes: Input conveyor, length 5800 Output conveyor with ejection, length 6000 Ramp for logs 4300x2600 The peeling line has dimensions 4000x2400

Condition: excellent (used), Year of construction: 1991, Cambio 66 debarker with input and output feeder, discharge. The machine underwent a thorough renovation and inspection a few years ago by MADREW from Szczecinek, but it was not installed. Net price. Cgjbu E N Tov Acnwebot The set includes a frame for the debarker, to mount the machine on a slope. Very good condition. Ready to work. Possibility of installation.

Condition: reconditioned (used), Year of construction: 1974, Valonkone VK26M (1974 series) with outfeed table: - Main machine - Feeding table ( driven ) - outfeed table - switch cabinet IMMEDIATELY available from stock Including infeed and outfeed table, workshop inspected * - Debarking capacity: 10cm - 61cm diameter - 4 main cutters - 4 cutting knives - Rotor speed =235 rpm / min - Rotor opening = 65cm - 30 KW motor, speed 1500/ min - Speed: 17-42m / min - 3m or longer ( wood length ) Dimension ( without infeed and outfeed table ) L= 9840mm infeed table: 3540mm x 1000mm x 1900 Main machine VK26M : 2530mm x 2200mm x 2350 Outfeed table ( motorized table ) : 3170mm x 1000mm x 1300 RENOVATION: Pos 1 1 Content: Machine disassembly, washing, sandblasting, priming and painting, repair, assembly Pos 2 1 Material blade axles on rotor new bearings and sealing (if necessary) Item 3 5 5 Other material: piece of V-belt for rotor drive Item 4 1 Gear oil Item 5 1 Material: Abrasive + paints Item 6 4 Valonkone piece peeling blade Item 7 4 Valonkone piece Pre-separator Pos 8 1 Switch cabinet : Cgobu E N Tjtwrp Debjt with 3-phase delta start for 30 kw main motor with 3-phase delta start for 11 kw geared motor with start for 4 kw geared motor infeed with start for 4 kw geared motor output Main starter Emergency STOP

Condition: ready for operation (used), Year of construction: 1995, Totally renovated outfeeding wheels for CAMBIO debarkingmachines Cgeber Axw Sju E N Tbet

Condition: used, Valon Kone VK450 with infeed conveyor. Cobu E N Tovt S R Aebogt

Condition: new, Year of construction: 2023, Debarker reducer disc with 5 or 6 knives, diam range 200, 300, 400 mm Cobu Eekhcx Se N Tbjgt

Condition: ready for operation (used), Logintake with butt end reducer and debarker. Cgebstrd Hfeu E N Tbet Below parts included: - Log deck with log unscrambler and log singulator - Butt-end reducer type Bruks RR1000 - Debarker type cambio 70-66 - Out-feed log conveyor with logkicker

Condition: reconditioned (used), Functionality: fully functional, approx. 4.5 m long infeed and centering table Drive via chain from the feed motor Centers the logs in the middle of the rotor Cgebu E Nou Hmacs Tbjt Debarking machine VK 26 4 main cutters 4 pre-cutters 30 KW main motor 11 KW feed unit non-driven extraction table Machine workshop checked Machine cleaned and repainted

Condition: reconditioned (used), Round wood debarker CAMBIO 45. Cjbueiqklds E N Tbogt Equipped with a AIR TEN rotor. Knife system CAM TOOL. The debarker will be sold after an overhaul. Can be sold as part of a debarking line.

Condition: ready for operation (used), Year of construction: 1988, Machine has been totally checked and renovated - max log diam. is 450 mm and min. is 65 mm - max. feeding speed 72 m / min - main motor 30 kW and feeding 5,5 kW - hydraulic tooltensioning Cgebjfk Ifksu E N Tbst

Condition: good (used), Year of construction: 1987, machine/vehicle number: 812 - 5547/V.01.87.110, For sale is a well-preserved Nicholson debarker A 5 B for debarking diameters up to 56 cm. We used the machine in our small timber sawmill for diameters up to 25 cm. It ran until the end without any problems. The blade cylinders were recently replaced and are absolutely airtight. The rotor bearings are perfect'. It is a very powerful and fast machine. Nicholson debarkers are uncomplicated machines! - Minimum length 200 cm - Minimum diameter 7.6 cm - Maximum diameter 56 cm - Weight 19.190 kg - Machine dimensions 470 x 251 x 335 cm incl. rotor - Feed rate up to 114 m / min. possible (currently set to 95 m / min.) Cobu E Njn R Dane Tbsgt

Condition: reconditioned (used), Year of construction: 1997, Functionality: fully functional, machine/vehicle number: 288, Debarker with infeed conveyor, for max log size either up to 460 mm or 600 mm, speed up 100 m/min, reducer rotor and debarking rotor, debarking rotor with opening 620 mm is NEW PRODUCED with warranty time, incl. reducer rotor change device. On below photos as it stands today, dismantled. Delivery time 3 month from order Cjbu Eotk N Dko N Tbegt

Condition: good (used), Debarker for sawlogs type ValonKone VK26MX Centering infeeder included. Csbouwlaisu E N Tbsgt Max log diamaters 60 cm Min log diameters 10 cm Min log lengths 2,0 meter Feeding speed 22 - 41 m/min

Year of construction: 2024, Condition: new, - debarker with 3/3 feed rollers - infeed and centering table - min log diameter 100 mm - max log diameter 600 mm - min log length 2.000 mm - 30 m/min feed speed Csbuofvbphe E N Tbjgt - 5 pcs. changeable carbide knives - 37 KW Main Motor - 9,2 KW Gearbox inffed and centering table - 5,5 + 7,5 KW Gearbox feed rollers - 9.000 Kg weight