Used drilling and milling for sale (108)

Condition: good (used), Year of construction: 2013, total length: 3,990 mm, total height: 2,500 mm, total width: 2,280 mm, overall weight: 8,500 kg, INGERSOLL CM SYSTEMS AOHD AGILE OIL HOLE DRILL Equipped with: Siemens 840D Control (2) Drill Heads 20-Tool Rack HSK 50A Taper (2) 7" 3-Jaw Chucks (2) Tailstocks (2) Steady Rests Chip Auger Chip Conveyor Mist Collector Hydraulic System Q R 2 Lube System Air Compressor Specifications: Maximum Length: 1050 mm (41.3") Minimum Length: 180.0 mm (7.1") Maximum Stroke: 250.00 mm Maximum Main Journal Diameter: 115.0 mm (4.5") Bodpfertrx Rjx Akxjlg Maximum Pin Journal Diameter: 100.00 mm (3.9") Maximum Swing Diameter: 250.0 mm (9.84") X-Axis Travel: 1450 mm (57.1") Y-Axis Travel: 150 mm (5.9")W/HSK 50 Z-Axis Travel: 305.0 mm (12.0") A-Axis Travel: 360 Degree B-Axis Travel: 90 Degree Feed Rate (Z): 1 m/min Maxim (40"/min max) Position Accuracy of X,Y,Z Axes: .010 mm (.00039") Position Accuracy of A & B Axes: .03 Degree Position Repeatability of X,Y,Z Axes: .005 mm (.0002") Position Repeatability of A & B Axes: .005 Degree Spindle Power: 5.5 kW (7.5 hp) Spindle Speed: 0-6,900 RPM Tool Adaption: HSK 50E or A Tool Storage (ATC): 20 Total - 10 Per Spindle W/HSK 50 Lubrication - Slides & Ball Screws: Automatic Central Lubricator Approximate Floor Space (LxWxH): 4.0 x 2.3 x 2.5 m (13.1 x 7.5 x 8.2 Ft) Approximate Machine Weight: 8,500 kg (18,740 #)

Condition: excellent (used), Year of construction: 2009, travel distance X-axis: 5,000 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 2,350 mm, feed rate X-axis: 13,000 m/min, feed rate Y-axis: 13,000 m/min, feed rate Z-axis: 13,000 m/min, total length: 12,000 mm, total height: 4,800 mm, table width: 2,000 mm, total width: 6,800 mm, table length: 2,500 mm, drilling capacity: 180 mm, rotational speed (min.): 2,000 rpm, feed length W-axis: 1,000 mm, Coolant true spindel 20 Bar Paper filtration system ATC Tool changer 60 Positions  Spindel extension L = 550 mm Full B-Axis 360.000 with ROD880C Table load 28.000 Kg X - Travel: 5000mm Y - Travel: 3500mm Z - Travel: 2350mm W - Travel: 1000mm Table Length: 2500mm Table Width: 2000mm Table load: 28000 Speeds / ranges: 2000Rpm Power: 51kW Spindle Taper: 180 ISO50ISO/Bt/Mk Feed rate X-Axis: 13000mm/min. Feed rate Y-Axis: 13000mm/min. Feed rate Z-Axis: 13000mm/min. Feed rate W-Axis: 13000mm/min. ATC Toolchanger: 60 Coolant through spindle / Bar:20 Number of controlled axis: 5 Blsdpfx Ajy Hq Dyskxog Length: 12000mm Width: 6800mm Height: 4800mm Weight: 44000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, neu ca. 12 - 14 Wochen ab Auf Spanien 50410 € 952.75 € 35 mm MK 4 390 mm 94- 2.225 (16) 50 Hz 113 U/min M35 1660 mm 1510 mm 2600 mm 910 kg 180 mm 190 - 650 mm 1310 mm Bjdpfx Aksynmtxexelg 125 mm 400 x 420 mm 0,10 - 0,18 - 0,24 (3) mm/min 750 - 1.500 U/min ERLO (MADE IN SPAIN) FOR DEMANDING WORKSHOP USE drilling and milling machine automatic feed precision electromagnetic clutches geared drive cross table fixed base and displaceable headstock control panel cooling equipment with electric motor pump hand wheel for fine tuning clamping device for tools adjustable stop drill guard OPTIONAL EQUIPMENT (PRICES ON REQUEST): Digital read out for drilling depth Tapping device Motorized longitudinal and/or transverse feed Digital read out for table axes and/or drill head height adjustment

Condition: excellent (used), Year of construction: 1996, Overhauled in 2005 Bljdpfxjy Eykgo Akxsg Number of spindles: 2 Drilling capacity per spindle, steel: 1-6 mm Drilling depth: max. 350 mm Travel distance Z: 350 mm Travel distance W: 350 mm Drive power per spindle - 100% duty cycle: 3.7 kW - 50% duty cycle: 5.5 kW Spindle speed: 3,000 - 27,000 rpm Spindle mounting: Ø 10 - 60 mm Coolant pressure: max. 150 bar Coolant flow rate: 48 l/min Coolant volume: 1,000 l

Condition: like new (used), Year of construction: 2013, functionality: fully functional, Carrier machining Blodpsv Iamzjfx Akxjg

Condition: used, table length 1500 mm table width 1500 mm table load 10 t voltage 380 V Blodpfsyuqf Eox Akxjg Heidenhain D.R.O. Additional plate on rotary table: 2.000 x 3.000 x 3.000 mm

Condition: used, spindle diameter . mm x-travel . mm y-travel . mm table length 2000 mm table width 2000 mm table load 25 t The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Blodpfjyqum Sox Akxeg We look forward to your visit. Your Markus Hirsch Team

Condition: used, Empty weight: 4.200 kg - Documentation available: Yes - CE certificate present: No - Control: Conventional - Motor power: 2.0kW - Transport weight [kg]: 4200kg Blsdpjwnifrjfx Akxjg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), functionality: fully functional, spindle speed (max.): 2,775 rpm, spindle speed (min.): 100 rpm, spindle mount: MK 3, type of input current: three-phase, total length: 1,000 mm, total height: 1,700 mm, total width: 750 mm, table length: 580 mm, drilling depth: 130 mm, Arboga A2508U Milling Machine. Milling & drilling possible. 3-phase 380 Volt, 2-speed motor runs perfectly! Geared head with 8 spindle speeds. Bljdpfjy D Ugtex Akxog Spindle RPM adjustable from 100 up to 2775. MT3 spindle taper. Tool ejector. Röhm Supra 1-13mm drill chuck included. Röhm machine vice included. Drilling depth adjustable. Max drilling depth: 130mm Head angle adjustable. Head height adjustable. Cross table size: 580x250mm Made in Sweden. Overall dimensions: 100x75x170cm Weight: 270KG Contact us for shipping options! € 3,500.00 EX VAT!

Condition: good (used), Table size 420 x 250 mm. Speeds: electronically controlled, stepless via potentiometer, 132 - 4500 rpm. Bjdpfx Aeyywn Eskxolg

Condition: new, Year of construction: 2026, ZX7045 B1L milling and drilling machine is a versatile drill-mill designed for precision metal machining in workshop and production environments. The machine combines drilling and milling functions, ensuring stable operation thanks to its heavy cast-iron construction and a wide spindle speed range. It is a solution for facilities that require repeatability, rigidity, and real productivity. Main advantages Heavy, stable cast-iron body – minimizes vibrations during milling and drilling Automatic spindle feed (125 mm) – improves efficiency in batch operations Height adjustment on the support, not the column – greater setup precision 12 spindle speed ranges up to 3200 rpm – adaptable to material and tooling Equipped with coolant system – stable cutting conditions and extended tool life Dovetail guideways – high rigidity and movement accuracy Tilting head ±90° – enables angled machining Quiet operation thanks to ground gears and capability of both left- and right-hand rotation Construction and technology The ZX7045 B1L drill-mill is designed as a compact yet fully industrial metal milling machine. Its heavy base and cast-iron body ensure high system rigidity. The cross table (1000 × 240 mm) features a precision-ground working surface, allowing accurate workpiece clamping. The MT4 spindle taper enables the use of a wide range of tools, including end mills, face milling heads, and taper shank drills. The 1.8 kW (2.5 HP) motor, powered at 400 V, ensures stable performance even at larger milling diameters. Precision and performance With X/Y/Z travels of 560 / 190 / 430 mm, the machine supports a wide range of operations: drilling up to 32 mm in steel and 45 mm in cast iron, face milling up to 80 mm, and end milling up to 28 mm. Adjustable quill feed rates (0.12; 0.18; 0.25 mm/rev) allow parameters to be tailored to the material and quality requirements. Standard equipment Drill chuck arbor MT4/B18 Drill chuck 3–16 mm / B18 Reduction sleeve MT4/MK3 Reduction sleeve MK3/MK2 Basic tools User manual (Polish) Optional equipment Machine stand Automatic X-axis feed Swivel, tilting, and precision vises Rotary tables and dividing heads Tapping heads and milling heads Tool holders and drive arbors Technical specifications Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 45 mm Face mill diameter: 80 mm End mill diameter: 28 mm Spindle speeds: 95, 170, 190, 280, 340, 540, 570, 960, 1100, 1600, 1950, 3200 rpm (12 steps) Spindle taper: MT4 Spindle feed: 125 mm (automatic) Bodpfx Aoy E Hk Hjkxolg Table size: 1000 × 240 mm Base dimensions: 440 × 600 mm Max. spindle-to-table distance: 445 mm Spindle-to-column distance: 262.5 mm X/Y/Z travel: 560 / 190 / 430 mm Quill feed rates: 0.12; 0.18; 0.25 mm/rev Head tilt (left/right): 90° Motor power: 1.8 kW (2.5 HP) Power supply: 400 V Weight: 375 kg

Condition: new, Year of construction: 2025, Heavy, solid cast iron design High running smoothness due to ground gear wheels running in an oil bath Right/left hand rotation Automatic quill feed with manual fine feed Motorized positioning of the Z-axis Motorized table feed of the X-axis Coolant device Machine lamp Gear head can be swivelled ± 60 Adjustable wedge bars Solid dovetail guide of the column, hand-scraped, for highest stability and greatest possible precision Height-adjustable, large-dimensioned protective disk with microswitch Drilling depth stop Digital position indicator DRO 5 Drilling / tapping function Massive and large dimensioned cross table, precisely surface machined with T-slots and adjustable taper bars Solid cast iron machine base with chip channel Single-stage quality industrial electric motor Wide speed range from 60 - 2,760 min-1 due to 2 infinitely variable speeds Dimensions and weights Length approx. 1600 mm Width/depth approx. 930 mm Height approx. 2110 mm weight approx. 495 kg Drilling/milling capacity cutter head size max. 63 mm shank cutter size max. 26 mm Drilling capacity steel (S235JR) 24 mm Continuous drilling capacity steel (S235JR) 20 mm Electrical data Supply voltage 230 V Mains frequency 50 Hz Electrical connection Total connected load 1.5 kW Horizontal milling table length 800 mm width 240 mm Distance vertical spindle - milling table max. 420 mm T-slots size 14 mm T-slots number 3 T-slots distance 80 mm Standards and approvals Standard DIN EN 55011 Bjdpfxsg U Uv Uj Akxjlg EMC class C2 Travel X-A

Condition: new, Year of construction: 2026, ZX7016 – precision and stability as standard The machine is equipped with a solid, massive cross table, ensuring smooth and precise work in two axes (X/Y), which allows for precise machining. There is a possibility of direct mounting of a vice on the work table (vice available as optional equipment). The cross work table is an integral element of the machine's construction, guaranteeing rigidity and reliability during operation. Blodpewvhmwjfx Akxjg Technical parameters: Max. drilling diameter 16 mm Max. vertical milling diameter 12 mm Max. face milling width 40 mm Motor S1/S6 0.55 kW / 0.75kW Motor speed 1420 rpm Voltage / frequency 230 V / 50 Hz Table dimensions (length x width) 420 x 152 mm Table travel in Y axis 115 mm Table travel in X axis 230 mm Column distance from spindle 180 mm Height of spindle tip from table 155 - 355 mm Spindle quill extension 77 mm Spindle taper MK2 Spindle speeds 320,400,500,650,800,900,1350, 1450,1800,1900,2700,3300 rpm Width and spacing of T-slots 12 x 80 mm Weight 75 kg Standard equipment 3-16 drill chuck Drill chuck arbor Cross table (work table) Workshop lamp (included without bulb) Handy tools Operating instructions DTR

Condition: new, Year of construction: 2026, This machine can be used for drilling, reaming and boring holes up to 45/40 mm in cast iron, threading up to M12 mm bolts, up to 80 mm milling and up to 22 mm notching. It is also useful for cutting and frontal milling. ZX 7045 B1 is by default equipped with an autofed spindle and a cooling system. Base available optionally. Rigid, sturdy cast iron Autofed spindle Milling machine height adjusted on the support, not on the column Additional flood coolant system Rigid cross table with precisely ground surface Bledpfx Akevxth Hsxsg Dovetail-shaped guides Quiet work due to the ground gears Left/right rotation +/- 90° rotary head Adjustable head height Base available optionally Technical data Steel drilling efficiency 32 mm Cast iron drilling efficiency 45 mm Frontal mill diameter 80 mm Arbor mill diameter 28 mm Spindle speed 50–3024 rpm (6/12) Arbor chuck MK4 Spindle feed 110 mm (automatic feed) Worktable dimensions 820 mm×240 mm Maximum distance from spindle to table 475 mm X-axis longitudinal travel 550 mm Y-axis transverse travel 170 mm Left/right rotary head 90° Motor power 1.3/1.8 kW Power supply 400V Weight 360 kg

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, rotational speed (max.): 4,500 rpm, controller model: Heidenhain TNC 310, TECHNICAL DETAILS X-axis travel: 500 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Tool holder: SK 40 Spindle speeds: 20-4500 rpm MACHINE DETAILS Control: Heidenhain TNC 310 Bsdjywgtxspfx Akxslg Dimensions & Weight Space requirements: approx. 2.15 x 2.00 x 2.50 m Machine weight: approx. 3 t EQUIPMENT Swivelling rotary table Documentation

Condition: good (used), Year of construction: 2007, control 840 D x-axis 2500 mm y-axis 2500 mm z-axis 1700 mm Control system - Siemens Sinumerik 840 D Bledjwzyp Uopfx Akxsg Max. workpiece weight - 6000 kg Spindle diameter - 130 mm Quill stroke - 700 mm Tool holder - ISO 50 DIN 69871 - AD Max. torque at the spindle - 1847 Nm Total power requirement - 65 kW Machine weight approx. 45 t Space requirement approx. 10.9 x 9.3 x 5.7 m

Condition: ready for operation (used), Servo-driven tapping and threading machine, Used machine Manufacturer: Electric Servo Model: M12H Dimensions: Bedpjxdfauofx Akxelg Width: 700 mm Depth: 150 mm Height: 520 mm Radius: 1100 mm Comes with Tap Torsion GT 12-0316 chuck set: 3.5 × 2.7 M3 4.5 × 3.4 M4 8 × 6.2 M8 M6-8 Torsion u-6.3 M5 Torsion u-5 M10 Torsion u-8 M12 Torsion u-9

Condition: ready for operation (used), functionality: fully functional, drilling capacity: 40 mm, spindle nose: MK-4, rotational speed (max.): 1,540 rpm, rotational speed (min.): 90 rpm, Heavy-duty column drilling machine with belt drive and 3-speed automatic spindle feed (0.05/0.1/0.2 mm/rev). Also equipped with a manually operated cross table measuring 605 x 252 mm. Bjdpfx Ajyzb Rmokxslg

Condition: excellent (used), Digital display Heidenhain Type: conventional Table KS 320 D Clamping surface: 530 x 270 mm Speed: 125 - 4400 rpm Feed: 0.03 – 0.40 mm/rev Drilling capacity in steel: 22 mm Thread cutting up to M16 Milling capacity in steel: 25 mm Drill spindle stroke: 120 mm Spindle motor power: 0.51 / 1.47 kW Dimensions: 2000 x 1200 x 1000 mm Blsdjyv Af Ujpfx Akxeg Weight approx. 900 kg

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, total length: 950 mm, total height: 930 mm, table width: 180 mm, input voltage: 400 V, total width: 560 mm, table length: 700 mm, stroke length: 52 mm, rotational speed (max.): 3,000 rpm, rotational speed (min.): 50 rpm, Equipment: documentation/manual, Features Equipped as standard with forward and reverse rotation enabling thread cutting Tilting milling head on both sides for angled drilling, bevel milling, etc. Universal application, e.g. milling, drilling, tapping, etc. Large cross table with scale Infinitely variable speed control 2-speed gearbox for optimal power transmission High concentricity thanks to precision bearings Ergonomically designed control panel Digital display of feed and spindle speed Drill chuck B-16 Arbor Table length 700 mm Digital spindle feed display Digital spindle speed display EMC filter according to CE standard Safety guard Service tools Base / stand Technical data Drilling capacity in steel: 25 mm Maximum face mill diameter: 80 mm Maximum end mill diameter: 25 mm Distance between spindle and column: 170 mm Minimum distance between spindle and table: 45 mm Maximum distance between spindle and table: 325 mm Spindle travel: 52 mm Spindle speed range, variable: 50 – 3000 rpm Spindle taper: MT3 Table size: 700 x 180 mm Maximum X-axis travel: 490 mm Maximum Y-axis travel: 160 mm Tilting milling head: -90° / +90° Milling head height adjustment: 275 mm T-slot size: 12 mm Blodpfxjytpl Ue Akxog Motor power: 1 kW Dimensions (L x W x H): 950 x 560 x 930 mm Weight: 160 kg Delivery to the customer is possible. Delivery cost according to the individual quotation of the transport company. If you are interested in other machines, please visit our website.

Condition: excellent (used), Control: Heidenhain TNC 124 Travel paths X/Y/Z: 500/250/160 mm Travel path W: 480 mm Clamping area (L x W): 885 x 320 mm Permissible table load: 250 kg Distance table – spindle nose: 0 – 605 mm Blsdpfoyvrfdex Akxeg Feed rate X/Y: 1 – 2000 mm/min Feed rate Z: 1 – 1200 mm/min Tool quick-change system: SF 32 Stepless speed range: 9200 rpm Drive power: 5 kW Required space (W x D x H): 1850 x 2550 x 2400 mm

Condition: used, Year of construction: 1989, functionality: fully functional, drilling capacity: 50 mm, Equipment: documentation/manual, Used grinding machine for sale. Ideal for workshops and DIY enthusiasts. The machine is fully functional but shows signs of wear consistent with its age. Perfect for sharpening tools and various grinding tasks. Robust construction ensures long-lasting durability. A must-have for every craftsman! Invest in quality. Grinding of two- and three-edged tools, drills up to 50 mm diameter Comprehensive documentation and instructions available Blsdpfoyz Iipsx Akxeg Very versatile grinding machine, ready for use

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, High-precision drilling and milling machine Fehlmann model Picomax 54 Heidenhain TNC 310 very good condition Technical Data: >> Year of construction: 2001 >> Travel X/Y/Z 500/ 250/ 160 mm >> Travel distance W 480 mm >> Clamping surface (L x W) 885 x 320 mm >> Permissible table load 250 kg >> Distance table - spindle nose 0 - 605 mm >> Feed speed X/Y 1 - 2000 mm/min >> Feed speed Z 1 - 1200 mm/min >> Tool quick-change system SF 32 >> Speed range infinitely variable 9200 rpm Blsdpfxjukf Ncj Akxjg >> Drive power 5 kW >> Space requirement (W x D x H) 1850 x 2550 x 2400 mm About the machine : We offer a high-precision drilling and milling machine Fehlmann model Picomax 54 in very good condition. It has a Heidenhain TNC 310 contouring control. The program creation in the user-friendly Heidenhain plain text dialog is particularly easy. HEIDENHAIN TNCs are workshop-oriented contouring controls with which you can program conventional milling and drilling operations directly on the machine in easy-to-understand plain-language dialog. The machine runs very smoothly at maximum speeds. Mechanically and electrically tested. Take the opportunity to view and try out this machine under power on site.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, High-precision drilling and milling machine Fehlmann model Picomax 54 Heidenhain TNC 310 Very good condition Technical specifications: >> Year of manufacture: 2000, Machine no. 14000258 >> Travel range X/Y/Z: 500 / 250 / 160 mm >> Travel range W: 480 mm >> Clamping surface (L x W): 885 x 320 mm >> Permissible table load: 250 kg Bjdpfx Asyu Snzjkxslg >> Distance table to spindle nose: 0 – 605 mm >> Feed rate X/Y: 1 – 2000 mm/min >> Feed rate Z: 1 – 1200 mm/min >> Tool quick-change system SF 32 >> Infinitely variable spindle speed: up to 9200 rpm >> Drive power: 5 kW >> Footprint (W x D x H): 1850 x 2550 x 2400 mm Accessories: >> Tool holders >> Heidenhain probe >> Operating manual, electrical diagrams, machine books About the machine: Offered here is a high-precision drilling and milling machine, Fehlmann model Picomax 54, in very good condition. It is equipped with a Heidenhain TNC 310 contouring control. Program creation is particularly easy thanks to the user-friendly Heidenhain plain text dialog. HEIDENHAIN TNCs are workshop-oriented contouring controls that enable conventional milling and drilling operations to be programmed directly at the machine using the easily understood plain text dialog. Even at maximum spindle speeds, the machine runs very smoothly. Mechanically and electrically tested. Take the opportunity to view and test this machine under power on site.

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 8906, table width: 520 mm, table length: 770 mm, drilling depth: 160 mm, rotational speed (max.): 2,800 rpm, overall weight: 1,500 kg, No reserve price – guaranteed sale to the highest bidder! Placing a bid requires collection within the period from 04.05.26 to 07.05.26. TECHNICAL DETAILS Spindle speed: 80-2,800 rpm Drilling depth: 160 mm Table dimensions: 770 x 520 mm Number of T-slots: 4 MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 900 x 900 x 2,100 mm Bljdpfeyr Iqyox Akxjg Weight: 1,500 kg External reference: 50